TP-702 Mercury è una reggiatrice automatica ad alta velocità per reggia in P.P. Le sue caratteristiche innovative ne fanno una macchina capace di offrire la massima qualità al minimo costo.TP-702 Mercury è disponibile in tre modelli:• Reggiatrice automatica ad alta velocità

TP-702 Mercury• Reggiatrice automatica ad alta

velocità TP-702P Mercury con Pressa Pneumatica

• Reggiatrice automatica ad alta velocità TP-702RS Mercury per pacchi di piccole dimensioni o rotondi

PROTEGGERE I VOSTRI PRODOTTI ...

... UN GIOCO DA RAGAZZI

prodotto importato e distribuitoreggiatrice automaticaTP-702 / TP-702P TP-702RSMercury

EFFE 3 TI PACKAGING TECHNOLOGIES è anche Avvolgitrici Automatiche e Semiautomatiche, Complementi per l’Automazione

e Presse Industriali per la compattazione e il recupero degli imballi esaustiwww.reggiatrici-transpak.it — www.effe3ti.com

Caratteristiche Principali

Inizio ciclo ergonomicoFacile accesso al pannello di controllo, posizionato sull’arco e orientabile per una perfetta visualizzazione ovunque si trovi l’operatore della macchina.Barra-pedale di inizio ciclo dal design ergonomico è ideale per lo start della macchina a mani libere.

Sensore di temperatura per lama saldanteLa temperatura della lama saldante è controllata da un sensore che ne assicura l’efficienza.

Espulsione fine reggia Il lembo finale della bobina di reggia viene automaticamente espulso assicurando la pulizia della macchina e preparandola per la nuova bobina senza la necessità di alcun intervento dell’operatore.

Espulsione automatica anelloCicli di reggiatura accidentali o di prova (senza pacco) producono anelli di reggia che vengono espulsi automaticamente.

TP-702always exceeds your expectations

Mercury

Robust & Compact Mechanical Strapping Head Mercury uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made.

The strapping head has no belts, clutches or pulleys. It is designed with up-to-date technology with few moving parts. With 30% fewer parts, Mercury requires fewer adjustments and less maintenance, and has fewer wear components. The simple design of Mercury minimizes the maintenance cost.

Waist-High Quick Coil Change (patents registered) Innovative waist-high coil change without access to the bottom of the machine. Quick release lock eliminates downtime to change the coil. Ergonomic and quick change design makes coil change simpler than ever.

Waist-High Auto Strap Feeding Friendly design to feed the strap automatically from the upper side of the coil without the need to access to the bottom of the machine.

Dual Pneumatic Press Offer better product stability and containment.

Auto Strap Ejector Loop-eject clears unwanted strap automatically if the machine is accidentally activated without a package. Eliminates downtime.

Adjustable Table Height The table height is adjustable to any height between 820 mm and 920 mm.

Free Access to Strap Guides (patents registered)Hinged top plate makes easy access to the strapping head for quick maintenance. Unblock the guides enabling free and quick access to the strap guides without use of any tools. The most maintenance-friendly design.

Main Features More Features

Mercury TP-702 is an innovative world-class high-speed automatic strapping machine. It is suitable for 5, 6, 9, or 12mm P.P. strap. It equips with all industry’s standard features and creative user friendly designs. Mercury TP-702 o�ers the most optimal performance, highest speed, easiest maintenance and the most cost e�ective solution in its class today.

TP-702PWith Dual Pneumatic PressMercury TP-702P (with dual press) is ideal to strap compressible material such as corrugated papers, paper sheets, plastic sheets, bags, etc.

TP-702RSFor Small or Round PackageMercury TP-702RS is suitable for small or round packages of plastic pipes, steel rod, hardwood, etc.　It can strap packages as small as 40 mm(W) x 10 mm(H) or round package as small as Ø 32 mm x 2 pieces. The TP-702RS strapping machine provides reliable high speed performance for small or round package applications.

Innovative World-class Model

Options● Photo-eye switch● Rear foot bar switch● Lower adjustable table height (770-820 mm) for

TP-702P● Stainless steel frame SUS 304 (TP-702S)

Ergonomic Cycle Initiation ● Turnable Operating Control Panel

The operating control panel is located on upper side of the machine for easy access. User friendly. Power cord located at the top of arch makes the machine very safe to operate and avoid wire damage while moving the machine.

● Front Foot-Bar SwitchErgonomic design and user friendly.

1

2

Strap End EjectorEject end of strap from the inlet of strap feeding. Easier to clean the end of strap and get the machine ready for next coil of strap.

Mercury FamilyDispenser Release SwitchFriendly design makes it easier to pull the strap from the strap dispenser for waist-high auto strap feeding.

Low VoltageAll DC motors and heater are “stepped down” to 24V to increase the safety of the machine.

Sensor Controlled HeaterThe fast heating mechanism is sensor controlled assuring consistent and high sealing efficiency.

1

2

Arch Size: 550 mm(W) x 400 mm(H)

Package Sizes

5/6 mm

9 mm

500 mm(W) x 350 mm(H)

Max.Min.Strap width

Package size

40 mm(W) x 10 mm(H) Pipe Ø 32 mm x 2pcs

50 mm(W) x 10 mm(H) Pipe Ø 34 mm x 2pcs

10 40

Ø32

Ø32

Ø32

TP-702always exceeds your expectations

Mercury

Robust & Compact Mechanical Strapping Head Mercury uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made.

The strapping head has no belts, clutches or pulleys. It is designed with up-to-date technology with few moving parts. With 30% fewer parts, Mercury requires fewer adjustments and less maintenance, and has fewer wear components. The simple design of Mercury minimizes the maintenance cost.

Waist-High Quick Coil Change (patents registered) Innovative waist-high coil change without access to the bottom of the machine. Quick release lock eliminates downtime to change the coil. Ergonomic and quick change design makes coil change simpler than ever.

Waist-High Auto Strap Feeding Friendly design to feed the strap automatically from the upper side of the coil without the need to access to the bottom of the machine.

Dual Pneumatic Press Offer better product stability and containment.

Auto Strap Ejector Loop-eject clears unwanted strap automatically if the machine is accidentally activated without a package. Eliminates downtime.

Adjustable Table Height The table height is adjustable to any height between 820 mm and 920 mm.

Free Access to Strap Guides (patents registered)Hinged top plate makes easy access to the strapping head for quick maintenance. Unblock the guides enabling free and quick access to the strap guides without use of any tools. The most maintenance-friendly design.

Main Features More Features

Mercury TP-702 is an innovative world-class high-speed automatic strapping machine. It is suitable for 5, 6, 9, or 12mm P.P. strap. It equips with all industry’s standard features and creative user friendly designs. Mercury TP-702 o�ers the most optimal performance, highest speed, easiest maintenance and the most cost e�ective solution in its class today.

TP-702PWith Dual Pneumatic PressMercury TP-702P (with dual press) is ideal to strap compressible material such as corrugated papers, paper sheets, plastic sheets, bags, etc.

TP-702RSFor Small or Round PackageMercury TP-702RS is suitable for small or round packages of plastic pipes, steel rod, hardwood, etc.　It can strap packages as small as 40 mm(W) x 10 mm(H) or round package as small as Ø 32 mm x 2 pieces. The TP-702RS strapping machine provides reliable high speed performance for small or round package applications.

Innovative World-class Model

Options● Photo-eye switch● Rear foot bar switch● Lower adjustable table height (770-820 mm) for

TP-702P● Stainless steel frame SUS 304 (TP-702S)

Ergonomic Cycle Initiation ● Turnable Operating Control Panel

The operating control panel is located on upper side of the machine for easy access. User friendly. Power cord located at the top of arch makes the machine very safe to operate and avoid wire damage while moving the machine.

● Front Foot-Bar SwitchErgonomic design and user friendly.

1

2

Strap End EjectorEject end of strap from the inlet of strap feeding. Easier to clean the end of strap and get the machine ready for next coil of strap.

Mercury FamilyDispenser Release SwitchFriendly design makes it easier to pull the strap from the strap dispenser for waist-high auto strap feeding.

Low VoltageAll DC motors and heater are “stepped down” to 24V to increase the safety of the machine.

Sensor Controlled HeaterThe fast heating mechanism is sensor controlled assuring consistent and high sealing efficiency.

1

2

Arch Size: 550 mm(W) x 400 mm(H)

Package Sizes

5/6 mm

9 mm

500 mm(W) x 350 mm(H)

Max.Min.Strap width

Package size

40 mm(W) x 10 mm(H) Pipe Ø 32 mm x 2pcs

50 mm(W) x 10 mm(H) Pipe Ø 34 mm x 2pcs

10 40

Ø32

Ø32

Ø32

EFFE3TI srl PACKAGING TECHNOLOGIES | C.so Garibaldi 298 13045 GATTINARA (VC) | Tel. +39.0163.828911 - Fax +39.0163.828990

Caratteristiche

• Macchina per reggia P.P. da 5 mm, 6 mm, 9 mm o 12 mm.

• Testa di reggiatura robusta e compatta.• Libero accesso alle guide reggia.• Alimentazione automatica all’altezza del

piano di lavoro.• Sistema ergonomico di cambio bobina.• Espulsione automatica anello.• Lama saldante controllata da sensori.• Altezza del tavolo regolabile tra 820 mm e

920 mm.

TP-702

Testa di reggiatura robusta e compattaMercury è equipaggiata con motori brushless e componenti della più recente tecnologia per assicurare il massimo livello di funzionalità e affidabilità oggi sul mercato.I motori brushless di fabbricazione tedesca trasmettono il moto ai vari organi della testa di reggiatura senza cinghie, frizioni o puleggie. L’alta tecnologia di progettazione e la riduzione di parti in movimento, rendono la testa di reggiatura affidabile e riducono i costi di manutenzione.

Libero accesso alle guide (brevettato)L’accesso alla testa di reggiatura e alle guide di scorrimento della reggia è estremamente facilitato e non necessita di alcun attrezzo.

Alimentazione automatica della reggia (brevettato)Il posizionamento del portareggia ed il sistema di alimentazione dall’alto, insieme al sistema di sgancio e sollevamento della bobina di reggia, rendono le operazioni sostituzione e caricamento facili e veloci.

TP-702always exceeds your expectations

Mercury

Robust & Compact Mechanical Strapping Head Mercury uses the latest DC brushless motor technology to provide the highest level of accuracy and reliability on the market. All motors are German-made.

The strapping head has no belts, clutches or pulleys. It is designed with up-to-date technology with few moving parts. With 30% fewer parts, Mercury requires fewer adjustments and less maintenance, and has fewer wear components. The simple design of Mercury minimizes the maintenance cost.

Waist-High Quick Coil Change (patents registered) Innovative waist-high coil change without access to the bottom of the machine. Quick release lock eliminates downtime to change the coil. Ergonomic and quick change design makes coil change simpler than ever.

Waist-High Auto Strap Feeding Friendly design to feed the strap automatically from the upper side of the coil without the need to access to the bottom of the machine.

Dual Pneumatic Press Offer better product stability and containment.

Auto Strap Ejector Loop-eject clears unwanted strap automatically if the machine is accidentally activated without a package. Eliminates downtime.

Adjustable Table Height The table height is adjustable to any height between 820 mm and 920 mm.

Free Access to Strap Guides (patents registered)Hinged top plate makes easy access to the strapping head for quick maintenance. Unblock the guides enabling free and quick access to the strap guides without use of any tools. The most maintenance-friendly design.

Main Features More Features

Mercury TP-702 is an innovative world-class high-speed automatic strapping machine. It is suitable for 5, 6, 9, or 12mm P.P. strap. It equips with all industry’s standard features and creative user friendly designs. Mercury TP-702 o�ers the most optimal performance, highest speed, easiest maintenance and the most cost e�ective solution in its class today.

TP-702PWith Dual Pneumatic PressMercury TP-702P (with dual press) is ideal to strap compressible material such as corrugated papers, paper sheets, plastic sheets, bags, etc.

TP-702RSFor Small or Round PackageMercury TP-702RS is suitable for small or round packages of plastic pipes, steel rod, hardwood, etc.　It can strap packages as small as 40 mm(W) x 10 mm(H) or round package as small as Ø 32 mm x 2 pieces. The TP-702RS strapping machine provides reliable high speed performance for small or round package applications.

Innovative World-class Model

Options● Photo-eye switch● Rear foot bar switch● Lower adjustable table height (770-820 mm) for

TP-702P● Stainless steel frame SUS 304 (TP-702S)

Ergonomic Cycle Initiation ● Turnable Operating Control Panel

The operating control panel is located on upper side of the machine for easy access. User friendly. Power cord located at the top of arch makes the machine very safe to operate and avoid wire damage while moving the machine.

● Front Foot-Bar SwitchErgonomic design and user friendly.

1

2

Strap End EjectorEject end of strap from the inlet of strap feeding. Easier to clean the end of strap and get the machine ready for next coil of strap.

Mercury FamilyDispenser Release SwitchFriendly design makes it easier to pull the strap from the strap dispenser for waist-high auto strap feeding.

Low VoltageAll DC motors and heater are “stepped down” to 24V to increase the safety of the machine.

Sensor Controlled HeaterThe fast heating mechanism is sensor controlled assuring consistent and high sealing efficiency.

1

2

Arch Size: 550 mm(W) x 400 mm(H)

Package Sizes

5/6 mm

9 mm

500 mm(W) x 350 mm(H)

Max.Min.Strap width

Package size

40 mm(W) x 10 mm(H) Pipe Ø 32 mm x 2pcs

50 mm(W) x 10 mm(H) Pipe Ø 34 mm x 2pcs

10 40

Ø32

Ø32

Ø32

Optionals• Inizio ciclo con fotocellula• Barra-pedale posteriore• Telaio in acciaio inossidabile (TP-702S)

Mercury TP-702P (con doppia pressa pneumatica) è ideale per la reggiatura di materiale come cartone, risme di carta, fogli di plastica, ecc.

Può reggiare pacchi fino a 40 mm(W) x 10 mm(H) o pacchi rotondi fino a Ø 32 mm x 2 pezzi. TP-702RS.

Dimensioni arco: 550 mm(W) x 400 mm(H)

www.reggiatrici-transpak.it — www.effe3ti.com

Caratteristiche

• Macchina per reggia P.P. da 5 mm, 6 mm, 9 mm o 12 mm.

• Testa di reggiatura robusta e compatta.• Libero accesso alle guide reggia.• Alimentazione automatica dall’alto.• Sistema ergonomico di cambio bobina.• Espulsione automatica anello.• Lama saldante controllata da sensori.• Altezza del tavolo regolabile tra 820 mm e

920 mm. (disponibile 770 mm - 820 mm).

Caratteristiche

• Macchina per reggia P.P. da 5 mm, 6 mm, 9 mm o 12 mm.

• Testa di reggiatura robusta e compatta.• Libero accesso alle guide reggia.• Alimentazione automatica dall’alto.• Sistema ergonomico di cambio bobina.• Espulsione automatica anello.• Lama saldante controllata da sensori.• Altezza del tavolo regolabile tra 820 mm e

920 mm.

TP-702PDoppia Pressa Pneumatica

TP-702RSPer Pacchi Piccoli o Rotondi

Min. Max.

5mm / 6 mm

q 40 mm(W) x 10 mm (H)m Ø 32 mm x 2 pz 500 mm (W) x

350 mm (H)9 mm q 50 mm(W) x 10 mm (H)

m Ø 34 mm x 2 pz

PaccoReggia

TP-702 / TP-702RS / TP-702P - Dati Tecnici

Misure Archi

Tipologia Reggia Cicli per Minuto Tensione Peso Netto Specifiche

ElettricheTP-702-59 5mm, 6mm o 9mm 65 da 1 a 32 kg 157 kg

110V/220V230V50/60 Hz 1PH

TP-702-12 12mm 60 da 1 a 45 kg* 166 kgTP-702RS 5mm, 6mm o 9mm 65 da 1 a 32 kg 157 kg

TP-702P-59 5mm, 6mm o 9mm 47 da 1 a 32 kg 227 kgTP-702P-12 12mm 44 da 1 a 45 kg* 229 kg

* Tensione maggiore su richiesta

S Misura standard – ✔ Misure disponibili

S Misura standard – ✔ Misure disponibili

S Misura standard – ✔ Misure disponibili

S Misura standard – ✔ Misure disponibili

TP-702-59 (per reggia 5mm, 6mm o 9mm)

TP-702P-59 (per reggia 5mm, 6mm o 9mm)

TP-702-12 (per reggia 12mm)

TP-702P-12 (per reggia 12mm)

H/W 550 650 850 1050 1250 1650400 S ✔

500 ✔ ✔ ✔ ✔

600 ✔

800 ✔ ✔ ✔

1000 ✔ ✔

H/W 650 850 1050 1250 1650500 S ✔ ✔

600 ✔

800 ✔ ✔

H/W 650 850 1050 1250 1650400 ✔

500 S ✔

600 ✔ ✔ ✔

800 ✔ ✔ ✔

1000 ✔ ✔ ✔

H/W 650 850 1050 1250 1650500 S ✔

600 ✔

800 ✔ ✔

1325

~14

2582

0~92

040

0

652

550

363

275840

1425

~15

2582

0~92

050

0 650

363

3259401195

652

2360

~24

6082

0~92

050

0

652

363

650

1195

940325

2360

~24

6082

0~92

050

0

652

650

363

1110

940325

2360

~24

6082

0~92

050

0

652

363

650

1195

940325

2360

~24

6082

0~92

050

0

652

650

363

1110

940325

1325

~14

2582

0~92

040

0

652

550

363

275840

1425

~15

2582

0~92

050

0 650

363

3259401195

652

EFFE3TI srl PACKAGING TECHNOLOGIES | C.so Garibaldi 298 13045 GATTINARA (VC) | Tel. +39.0163.828911 - Fax +39.0163.828990www.reggiatrici-transpak.it — www.effe3ti.com