GH16 GH15RFT - EUROMATEL · 2012. 8. 28. · Ghisalba si riserva il dir itto di modificare le...
Transcript of GH16 GH15RFT - EUROMATEL · 2012. 8. 28. · Ghisalba si riserva il dir itto di modificare le...
Contattori e relè termiciContactors
and thermal overload relaysI prodotti inclusi in questo pieghevole devono essere utilizzati in conformità alle norme europee. Le informanzioni contenute in questa brochure sono da considerarsi indicative e corrette al momento della stampa, ma non vincolanti in fase contrattuale. Ghisalba si riserva il dir itto di modificare le specifiche senza obbligo di avviso.Products included in this leaflet must be used according to european specifications. The information contained in this brochure is for guidance only, correct going to print but does not form part of any contracts. Ghisalba reserves the right to change the specification of their products without notice.
VIA TEVERE 15 - 10098 CASCINE VICA RIVOLI - TORINO - ITALYTEL. +39 011 95991 - FAX +39 011 9597064www.ghisalba.com - www.ghisalba.eu - e-mail: [email protected]
GHMR
3NO + 1NC GHMR.31
4NO GHMR.40
2NO + 2NC GHMR.22
Ie AC-15 230V (A) 3
Ie AC-15 400V (A) 2
Ith (A) 10
Peso (kg) 0.16
GH15CR
3NO + 1NC GH15CR.31
4NO GH15CR.40
2NO + 2NC GH15CR.22
3NO + 2NC GH15CR.32
Ith (A) 10
Peso (kg) 0.4
RELE’ / RELAYS
NOTE
SIGLIA PRODOTTO / PRODUCT TYPE
1 Bobina B02 / B02 Coill
2 L’impiego di n. 1 GH15T10 / GH15T01 consente il montaggio di un altro blocchetto frontale di altro tipo da GH15FN a GH15JT/JN When 1 single block (type GH15T10 or GH15T01) is fitted, another different version of top mounting accessory can be added on from
GH15FN up to GH15JT/JN. L’impiego di n. 2 GH15T10 / GH15T01 consente il montaggio di un altro blocchetto frontale di altro tipo da GH15KT a GH15MT When 2 single block (type GH15T10 or GH15T01) is fitted, another different version of top mounting accessory can be added on from
GH15KT up to GH15MT.
3 Consultare il catalogo tecnico dove sono riportate le potenzemassime di impiego. For the maximum rated operational power, please refer to thetechnical catalogue.
4 In caso di utilizzo dell’interblocco ridurre di un’unità il numero diGH15S11 installabili. When mechanical interlock is required reduce the quantity ofGH15S11 by 1 unit.
5 L’apparecchio è dimensionato per correnti in AC-1 pari a 40A.L’utilizzo a 40A in AC-1 è possibile con appositi terminali per l’utilizzo di cavi di sezione 10mm2.
The contactor is sized for 40A AC-1 cat. Use of the contactorat 40A AC-1 is allowed with suitable terminals (for cable of 10mm2 cross section).
6 ll GH15GN.4.00 è dimensionato per correnti in AC-1 pari a 63A. È possibile utilizzare il contattore a tali valori di correntecon appositi terminali per l’utilizzo di cavi di sezione 16mm2.
The GH15GN.4.00 is sized for 63A AC-1 cat. Use of the contactor at 63A AC-1 is allowed with suitable terminals (for cable of16mm2 cross section).
7 I valori in VA indicano gli assorbimenti in c.a., i valori in W indicano gli assorbimenti in c.c. VA values refer to a.c. coils - W values refer to d.c. coils.
8 I blocchetti aggiuntivi di contatti ausiliari non sono utilizzabili peri minicontattori con terminali per circuiti stampati GHMCP. Additional auxiliary contacts blocks cannot be used for GHMCP mini-contactors with printed circuit terminals.
9 Impiego fino a max n. 4 GH24T10 / GH24T01. Max n. 4 GH24T10 / GH24T01 can be fitted.
10 Connessioni con 2 cavi da 70 mm2 o barre di sezione adeguata. For connection use 2 cable 70 mm2 or bars of suitable cross section.
11 2 x 185 mm2
12 Per correnti superiori a 800A il relè è realizzato a cura dell’utilizzatore. Per formare un relè con taratura 810-1200A ordinare RTD32.4 (2.7-4A) + U3/32SM + NR. 3 TA 1500/5 20VA classe 1
For relay with rated 810-1200VA must be also ordered: RTD32.4 (2.7-4A) + U3/32SM + NR. 3 Ammeter Transformer 1500/5 20VA class 1
13 Contattare ufficio commerciale / Please contact customer service
GH15DN.3.10
220V-50Hz
Tipo del contattoreContactor type
Nr. contatti aux NCNo. of NC aux. contacts
Nr. contatti di potenzaNo. of main poles
Nr. contatti aux NONo. of NO aux contact
Tensione bobinaCoil voltage
Pie
gh. 0
7/20
09 IT
/EN
- 5
000
TETRAPOLARE / FOUR-POLE
bob. c.a./c.c. a.c./d.c. coil GH82.3.44 GH84.3.44
bob. c.a. / a.c. coil GH16FN.4.00 GH16GN.4.00 GH16HN.4.00 GH16JN.4.00GH16LN.4.00 GH16MN.4.00 GH16NN.4.00 GH16PN.4.00 GH16RN.4.00 GH16SN.4.00 GH16TN.4.00 GH16VN.4.00
bob. c.c. / d.c. coil GH16FN.4.00 GH16GN.4.00 GH16HN.4.00 GH16JN.4.00
IV POLO AGGIUNTIVO / ADD-ON NEUTRAL POLE NP1000-6 (1000A)
AC-1 - Ith = Ie - Ue ≤ 500V
t ≤ 40° C [A] 50 63 80 100 135 200 250 300 350 450 600 800 1600 2000
t ≤ 55° C [A] 43 54 68 85 115 170 213 255 298 383 510 680 1360 1700
t ≤ 70° C [A] 35 44 56 70 95 140 175 210 245 315 420 560 1120 1400
AC-1 Potenza nominale / Rated power cos φ = 1
230V [kW] 20 25 39 39 49 80 92 99 139 179 239 318 637 796
400V [kW] 34 43 69 69 86 139 159 173 242 311 415 554 1107 1384
415V [kW] 35 45 71 71 89 144 165 179 251 323 431 574 1149 1436
440V [kW] 38 48 76 76 95 152 175 190 266 343 457 609 1218 1522
500V [kW] 43 54 86 86 108 173 199 216 303 389 519 692 1384 1730
Connessioni / Connection [mm2] 1 x 10 1 x 16 1 x 25 1 x 35 2 x 50 2 x 120 2 x 150 2 x 240 3 x (100x5)
Dimensioni di ingombro e fissaggio Overall and fixing dimension [mm]
Fissaggio / Fixing Viti o DIN 35mm / Screw or DIN 35mm Viti / Screw
Bobina / Coilc.a./a.c. B02
B021 B032 B041 B042 B61 + FG61 x 2c.c./d.c. B02
Assorbimento medioAverage coil consumption
spunto / pick-up [VA / W] 250 / 230 250 / 230 350 400/350 500 1600
ritenuta / sealed [VA / W] 18 / 4 18 / 4 5 6 6 22
Contatti ausiliari / Auxiliary contact
frontali / top mounting GH15T11 (1NO+1NC) - GH15T22 (2NO+2NC) - GH15T31 (3NO+1NC) - GH15T40 (4NO) EF22 (2NO+2NC)
frontali / top mounting GH15T10 (1NO) - GH15T01 (1NC)
laterali / side mounting GH15S11 (1NO+1NC)
frontali / top mounting GH320TP1 (1NO+1NC - DELAY-ON/DELAY OFF - 0,3-30s) - GH320TP2 (1NO+1NC - DELAY-ON/DELAY OFF - 10-180s)
Interblocco meccanco / Mechanical interlock orizzontale / horizontal BM0H BM3H
verticale / vertical BM6V x 2
Protezioni contro i contatti frontali accidentali Shrouds against unitentional frontal touch
singola / singleIP20 di serie / standard
MR3
tetrapolare / 4-pole PR-P4 PR-T4 PR62 PR64
TRIPOLARE / THREE-POLE bob c.a. / a.c. coil GH15RFT1.3.10 GH15RFT2.3.00 GH15RFT3.3.00 GH15RFT5.3.00
bob c.c. / d.c. coil GH15RFT1.3.11 GH15RFT2.3.10 GH15RFT3.3.10 GH15RFT5.3.10
AC-6b Potenza nominale / Rated power
230-240V 50-60HZ [kVAR] 7,5 10 15 25
380-415V 50-60HZ [kVAR] 15 25 30 50
440V 50-60HZ [kVAR] 15 27,5 33 56
500V 50-60HZ [kVAR] 15 27,5 33 56
690V 50-60HZ [kVAR] 18 30 36 65
CARATTERISTICHE MECCANICHE
Dimensioni di ingombro e fissaggioOverall and fixing dimension [mm]
Fissaggio / Fixing Viti o DIN 35mm / Screw or DIN 35mm
Grado di protezione / Protection degree IP20
Durata meccanica / Mechanical durability [106op] 10
Temperatura funzionamento / Working temperature [°C] -25°C +55°C
CARATTERISTICHE ELETTRICHE CIRCUITO DI POTENZA / ELECTRICAL DATA OF POWER CIRCUIT
AC-6b Durata elettrica / Electrical durability Ue ≤ 440V [op]
Ue ≤ 690V [op]
Frequenza max. manovre / Max. sqwitching frequency [op/h] 300 300 250 250
Corrente max. di picco / Max. peak current [kA] infinito / unlimited infinito / unlimited infinito / unlimited infinito / unlimited
Tensione nominale d’isolamento / Rated insulation voltage [V] 690 690 690 690
Fusibili di protezione contro cortocircuito - Coord. Tipo 1 Short circuit protection fuses - Type 1 coord. gG - Ue ≤ 440V [A] 40 63 80 125
Resistenza polo / Pole resistance [mΩ] 2,2 1,8 1,2 1,2
Sezione delle connessioni / Connection size [mm2] 1 x 1,5 … 10 1 x 1,5 … 10 1 x 2,5 … 35 1 x 2,5 … 35
Coppia di serraggio / Tightening torque [Nm] 1,4 2,3 5 5
CARATTERISTICHE ELETTRICHE CIRCUITO DI COMANDO / ELECTRICAL DATA OF CONTROL CIRCUIT
Bobina / coilc.a. / a.c. B01 B02
c.c. / d.c. B011 B02Tensioni nominali / Rated control voltage [V] 12 … 690
Campo funzionamento bobina / Coil operation limitsattrazione / pick-up [V] 0,85 … 1,1 Uc
rilascio / drop-out [V] 0,2 … 0,75 Uc
Assorbimento medio / Average coil consumptionspunto / pick-up [VA / W] 80 … 100 / 120 250 / 230
ritenuta / sealed [VA / W] 9 … 12 / 2 18 / 4
Fattore di potenza / Power factorspunto / pick-up 0,65 0,54
ritenuta / sealed 0,35 0,35
Tempi di manovra a tensione nominale in c.a.Operating time at a.c. rated voltage
attrazione / pick-up [ms] 10 … 25 6 … 15
rilascio / drop-out [ms] 6 … 18 12 … 30
ACCESSORI / ACCESSORIES
Contatto ausiliario / Auxiliary contactlaterale / side mounting GH15S11 1NO+1NC
forntale / top mounting GH15T10 1NO - GH15T01 1NC
Interblocco meccanico / Mechanical interlock orizzontale / horizontal BM0H
114
60
105 114
79
109
142
105
130 170
147
162 200
193
208 289
193
208
114
60
127 114
79
131
0,9Kg 1,45Kg
1,9Kg 4,1Kg 8,0Kg 9,3Kg
50
100
70
100
96
100
135
130
170 170
160 160
450
568
291
60Kg
175110175
280
80
45
145 80
45
145 114
60
160
80
57
145 80
57
145 114
60
160
0,51Kg 0,53Kg 1,17Kg
0,51Kg 0,53Kg 1,17Kg
35 35
35 35
60 60
60 60
50
100
50
100
6
7
7
3
2
3
2
GH16... GH15RFT...
Conformità: CEI EN 60947-4-1 Specification: IEC 60947-4-1
Conformità: CEI EN 60947-4-1 Specification: IEC 60947-4-1
Per i tipi e le prestazioni omologate consultare la nostra Organizzazione Commerciale.For types and ratings approved, please contact our Sale Dept.
Per i tipi e le prestazioni omologate consultare la nostra Organizzazione Commerciale.For types and ratings approved, please contact our Sale Dept.
13
13
TRIPOLARE / THREE-POLE
bob. c.a. / a.c. coilGHMC.3.10 GHMD.3.10 GH15BN.3.10 GH15CN.3.10 GH15DN.3.10 GH15EN.3.10
GH15ET.3.00 GH15FT.3.00 GH15GS.3.00 GH15GT.3.00 GH15HT.3.00 GH15JT.3.00 GH15KT.3.00 GH15LT.3.00
GH15MT.3.00 GH15NT.3.00 GH15PT.3.00 GH15RT.3.00 GH15ST.3.00 GH15TT.3.00 GH55B.3.22 GH57B.3.22 GH62.3.22 GH64.3.22 GH76.3.12 GH78.3.12 GH82.3.44 GH84.3.44GHMC.3.01 GHMD.3.01 GH15BN.3.01 GH15CN.3.01 GH15DN.3.01
bob. c.c. / d.c. coilGHMC.3.10 GHMD.3.10 GH24BN.3.10 GH24CN.3.10 GH24DN.3.10 GH24EN.3.10
GH15BN.3.11 GH15CN.3.11 GH15DN.3.11 GH15EN.3.11 GH15ET.3.00 GH15FT.3.00 GH15GS.3.00 GH15GT.3.00 GH15HT.3.00 GH15JT.3.00 GH15KT.3.00 GH15LT.3.00GHMC.3.01 GHMD.3.01 GH24BN.3.01 GH24CN.3.01 GH24DN.3.01 GH24EN.3.01
TETRAPOLARE / FOUR-POLEbob. c.a. / a.c. coil GHMC.4.00 GHMD.4.00 GH15BN.4.00 GH15CN.4.00 GH15DN.4.00 GH15EN.4.00 GH15FN.4.00 GH15GN.4.00 GH15HN.4.00 GH15JN.4.00
GH15LN.4.00 GH15MN.4.00 GH15NN.4.00 GH15PN.4.00 GH15RN.4.00 GH15SN.4.00 GH15TN.4.00bob. c.c. / d.c. coil GHMC.4.00 GHMD.4.00 GH24BN.4.00 GH24CN.4.00 GH24DN.4.00 GH24EN.4.00 GH15BN.4.10 GH15CN.4.10 GH15DN.4.10 GH15EN.4.10 GH15FN.4.00 GH15GN.4.00 GH15HN.4.00 GH15JN.4.00
IV POLO AGGIUNTIVO / ADD-ON NEUTRAL POLE NP500-5 (500A) / NP760-5 (760A) NP500-6 (500A) / NP1000-6 (1000A) NP1000-7 (1000A) NP1000-6 (1000A)
TETRAPOLARE / FOUR-POLEpoli potenza NC / NC main pole
bob. c.a. / a.c. coil GHMC.22.00 GH15BN.22.00 - GH15DN.22.00 GH15GN.22.00GH15LN.22.00 GH15PN.22.00
bob. c.c. / d.c. coil GHMC.22.00 GH15BN.22.10 - GH15DN.22.10 GH15GN.22.00
bob. c.a. / a.c. coil GH15BN.04.00 - GH15DN.04.00 GH15GN.04.00GH15LN.04.00 GH15PN.04.00
bob. c.c. / d.c. coil GH15BN.04.10 - GH15DN.04.10 GH15GN.04.00
AC-1 Ith = Ie Ue ≤ 690V t ≤ 40°C [A] 20 20 25 25 32 32 25 30 40 40 45 50 50 63 80 100 125 125 3p ... 135 4p 135 200 230 3p ... 250 4p 250 3p ... 300 4p 350 450 500 3p ... 600 4p 700 800 1000 1100 1200 1350 1600 2000
AC-2/AC-3 Ie Ue ≤ 440V 50/60HZ t ≤ 55°C [A] 9 12 10 14 18 22 9 12 16 23 25 32 40 40 50 63 80 95 110 115 150 175 210 260 315 450 550 700 860 1000 1200 700 860
AC-2/AC-3 Potenza di impiego normalizzataStandard operational power
230V [kW] 3 4 3 4 5 6 2,2 3 4 6.5 6.5 7.5 11 11.5 12.5 18.5 22 25 30 30 40 50 60 75 90 132 175 225 280 325 390 225 280
400V [kW] 4 5,5 4 5.5 7.5 11 4 5.5 7.5 11 11 15 18.5 20 22 30 37 45 55 55 75 90 110 132 160 250 315 400 500 580 710 400 500415V [kW] 4 5,5 4.3 5.7 8 11 4,3 6 8 11 11 15 18.5 21 22 30 40 47 59 59 80 95 115 140 180 257 315 415 515 600 710 415 515
440V [kW] 4 5,5 4.5 6 8.5 12 4,7 6.4 9 - 12.5 16.5 21 23 25 33 45 51 63 63 85 100 125 150 190 270 335 450 530 630 750 450 530
500V [kW] 4 5,5 5.5 7.5 10 10 5,5 7.5 10 - 11 15 18.5 19.5 22 30 45 51 55 75 90 110 132 160 210 300 375 500 600 720 850 500 600
690V [kW] 4 5,5 5.5 7.5 10 10 5,5 7.5 7.5 - 11 15 18.5 20 22 30 45 51 55 90 110 132 132 160 210 375 500 630 710 850 1000 635 310
1000V [kW] - - - - - - 0 - - - - - - - - - 25 30 37 55 75 90 110 132 160 280 355 - - - - - -
Connessioni potenza / Main connections [mm2] 2,5 4 4 4 4 4 4 4 6 6 10 10 10 16 25 35 50 50 50 95 95 120 185 240 2 x 150 2 x (40 x 5) 2 x (50 x 5) 2 x (60 x 5) 2 x (40 x 6) 2 x (40 x 6) 2 x (40 x 6) 3x (100 x 5) 3x (100 x 5)
Dimensioni d’ingombro e fissaggio 3POverall and fixing dimensions 3PPer contattori tetrapolari vedi GH16For 4 pole contactors see GH16
[mm]
Fissaggio / Fixing Viti o DIN 35mm / Screw or DIN 35mm Viti / Screw
Bobina / coil c.a. / a.c. B01 B02B021 B022 B031 B041 B51 + FG51 B61 + FG61
B8 + FG78B61 + FG61 x 2
c.c. / d.c. B011 B02 B8 + FG78
Tensioni nominali / Rated control voltage c.a./a.c. [V] 24 … 600 12 … 690 12 … 690 24 ... 600 24 ... 600 24 … 600 24 … 600 24 … 600 24 … 600 48 … 600 24 … 600
c.c./d.c. [V] 12 … 220 24 … 220 12 … 125 12 … 250 24 … 250 24 … 250 24 … 250 24 … 250 24 … 440 24 … 440 48 … 440 24 … 440
Assorbimento medioAverage coil consumption
spunto / pick-up [VA / W] 25 / 2,5 3 100 / 120 250 / 230 250 / 230 250 / 230 350 400 950 / 850 1600 / 1550 2400 / 2100 3200 / 3100
ritenuta / sealed [VA / W] 5 / 2,5 3 12 / 2 18 /4 18 / 4 18 / 4 5 6 11 / 10 25 / 22 70 / 60 50 / 44
Contatti ausiliari / Auxiliary contact
frontali / top mounting GHTR11 (1NO+1NC) - GHTR22 (2NO+2NC)GHTR40 (4NO) - GHTR02 (2NC)
GH24T10 (1NO) - GH24T01 (1NC) GH15T11 (1NO+1NC) - GH15T22 (2NO+2NC) - GH15T31 (3NO+1NC) - GH15T40 (4NO) EF22 (2NO+2NC) EB11 (1NO+1NC) EF22 (2NO+2NC)
GH15T10 (1NO) - GH15T01 (1NC)
laterali / side mounting GH15S11 (1NO+1NC)
frontali / top mounting GH320TP1 (1NO+1NC - DELAY-ON/DELAY OFF - 0,3-30s ) - GH320TP2 (1NO+1NC - DELAY-ON/DELAY OFF - 10-180s )
Interblocco meccanicoMechanical interlock
orizzontale / horizontal GHMC…./R GHMD…./R BM24H BM0H BM3H BM5H BM6H BM7H
verticale / vertical BM5V BM6V BM7V BM6V x 2
speciale / specialBM56H - BM56V
BM67H - BM67V
Aggancio meccanico / Mechanical latch GH55B + AM5 GH57B + AM5 GH62 + AM6 GH64 + AM6 GH76ML.3.22 GH78ML.3.22 GH82 + AM6 x 2 GH84 + AM6 x 2
Aggancio magnetico montato su contattore Built-in Magnetic latch on contactor
tripolare / three-pole GH15MTML.3.00 GH15NTML.3.00 GH15PTML.3.00 GH15RTML.3.00 GH15STML.3.00 GH15TTML.3.00
tatrapolare / four-pole GH15LNML.4.00 GH15MNML.4.00 GH15NNML.4.00 GH15PNML.4.00 GH15RNML.4.00 GH15SNML.4.00 GH15TNML.4.00
Protezioni contro i contatti frontali acci-dentali Shrouds against unitentional frontal touch
singola / single
IP20 di serie / standard
MR3
tripolare / three-pole PR-P3 PR-T3 PR55 PR57 PR62 PR64 PR62 PR64
tetrapolare / 4-pole PR-P4 PR-T4
Relè / Overload termici / thermal RTD23E TOR-C / RTD32 RTD32 RTD42 RTD65 RTD74 RTD180 RDT320 RTD800
Briglie connessione contattore-relè / Contactor-relay direct links montaggio diretto / direct connection primario passante / current transformer: 60 - 90A 80 -120A - BRX180 - BRP180 : GH15NT-PT BRP320 : GH15RT-ST-TT BR56 : GH55-GH57 / BR66 : GH62-GH64
Relè / Overload elettronici / electronicRTE270.100 / RTE270P.270 + BRP180 RTE270T.270 + BRP320
RTE270P.270 + BRP180 RTE800.800 + BRX6 / BR56 : GH55-GH57- BR66 : GH62-GH64
80
45/57
8557,5
45
49 86
45
9480
45/57
91 114
60
105/127 114
60
109/131 114
79
109/131 137
79
130/152 142
105
130170
110
162 170
147
162 200
145
208162
79
130
0,41Kg0,16Kg 0,53Kg
0,47Kg 1,2Kg 1,5Kg 1,5Kg 2,2Kg1,2Kg
4,1Kg 4,7Kg 7,2Kg
2Kg
35
50
35
80250
220
225 307
280
291 450
568
291490
334
345258
220
225 361
280
291 381
334
345
13,5Kg 26,4Kg 60Kg51Kg14Kg 27,6Kg 52,5Kg
175110175
280
36
60
3 P 3 P 4 P 3 P 4 P 3 P 3 P 4 P4 P4 P
36 50 70 70 70 100 135 12050
60 100 100 100 130 130 130 160100
110
220
175
280
120
380
RTD23E
0,4-0,6 4-6 Classe intervento / Tripping class: 10Riarmo manuale / Manual resetPulsante arresto-riarmo / Stop-reset buttonAccessorio per montaggio separato / Accessory for separate mounting: U12SMMontaggio diretto / Direct mounting
0,6-0,9 6-90,8-1,2 8-111,2-1,8 10-141,8-2,7 13-182,7-4 17-23
TOR-C
0,45-0,63 3,5-4,8
Classe intervento / Tripping class: 10Riarmo manuale-auto / Manual-auto resetPulsante arresto-riarmo / Stop-reset buttonPulsante di test / Test buttonMontaggio diretto / Direct mounting
0,55-,08 4,5-6,30,75-1,0 5,5-7,50,9-1,3 7,2-101,1-1,6 9-12,51,4-2,0 11,3-161,8-2,5 15-202,3-3,2 17,5-21,52,9-4,0 21-25
RTD32
0,4-0,6 6-9 Classe intervento / Tripping class: 10Riarmo manuale-auto / Manual-auto resetPulsante arresto-riarmo / Stop-reset buttonPulsante di test / Test buttonMontaggio su guida DIN 35mm / Built-in DIN 35mm rail mountingAccessorio per montaggio separato / Accessory for separate mounting: U3-32SMMontaggio diretto / Direct mounting
0,6-0,9 8-110,8-1,2 10-141,2-1,8 13-181,8-2,7 17-242,7-4 23-324-6
RTD42 28-42Classe intervento / Tripping class: 10Riarmo manuale-auto / Manual-auto resetPulsante arresto-riarmo / Stop-reset buttonPulsante di test / Test buttonAccessorio per montaggio separato / Accessory for separate mounting: U3-42G + LG5830-2 (solo/only RTD65)Montaggio diretto / Direct mounting
RTD65
10-1414-2020-2828-4240-5252-65
RTD74 60-74
RTD180
60-90 Classe intervento / Tripping class: 1080-120 Riarmo manuale-auto / Manual-auto reset120-180 Pulsante arresto-riarmo / Stop-reset button
Pulsante di test / Test button
RTD320
144-216 Classe intervento / Tripping class: 10216-320 Riarmo manuale-auto / Manual-auto reset
Pulsante arresto-riarmo / Stop-reset buttonPulsante di test / Test button
RTD800
240-360 Classe intervento / Tripping class: 10360-540 Riarmo manuale-auto / Manual-auto reset540-800 Pulsante arresto-riarmo / Stop-reset button
Pulsante di test / Test button
RTE270 30-100 Classe intervento / Tripping class: 10 - 20 - 3080-270 Riarmo manuale-auto / Manual-auto reset
RTE800 240-800 Pulsante arresto-riarmo / Stop-reset buttonPulsante di test / Test button
1 1
1
1
1 110
13
13
13
13
11
12 12
4
5 5 6
7
8 9
2
3
Omologazioni: R.I.N.A. Approvals: DNV UL - CSA Conformità: CEI EN 60947-4-1 Specification: IEC 60947-4-1
Per i tipi e le prestazioni omologate consultare la nostra Organizzazione Commerciale.For types and ratings approved, please contact our Sale Dept.
GHMC... GH24... GH15... GH...
200
193
2088,0Kg
170
160