8/12/2019 Brochure Testo 340

1/8

8/12/2019 Brochure Testo 340

2/82

1

1

2

3

2

Rising fuel costs for thermal systems highlight more and more the need for efficiency monitoring using emissionmeasurements. A practical, easy-to-use emission analyzer for a variety of applications is therefore ideal.

AbgasHeizl EL

drucken Start speich. The unique measuring range extension feature facilitates unlimited measurements even at high gasconcentrations.

testo 340 is equipped with an O 2 sensor as standard. 3 additional gas sensors can be individuallyconfigured at any time so your analyzer is optimally adpated to your measurement job.

Compact design combined with reliable engineering makes testo 340 the ideal analyzer forcommissioning, service and maintenance work as well as measurements for monitoring purposes.

Industrial burners Stationary industrial engines

Gas turbines Thermal processes

TV approval / EN standard Accuracy approved for O 2, CO 2, CO, NO, NO low, C, hPa to EN 50379 standard, Part 2 Approved sensor change (adjustment without test gas)

testo 340 is the hand-held analyzer for industrial flue gas analysis and offersbenefits such as:

The benefits of this protection function: No additional sensors and costswith different measuring ranges.

Automatic sensor protectionfrom overloading, withoutinterrupting the measurement.

The measuring ranges of yourCO, CO low, NO, NOlow or SO 2sensor is increased 5 times byautomatic measuring rangeextension. At high gasconcentrations the sensor is thennot stressed any more than itwould be at low concentrations.

As an option, the measuringranges of all the sensors in theanalyzer can be extendedsimultaneously by a factor of 2.

Measurements up to, forexamplemax. 50,000 ppm (CO), ormax. 15,000 ppm (NO), ormax. 25,000 ppm (SO 2 ), withoutoverloading the sensor.

Automatic sensor protection at high gas concentrations: Measuring range extension

More reliability, more convenience and even more

parameters...

8/12/2019 Brochure Testo 340

3/83

2

3

3

1) NO2 sensor

2) SO2 sensor

3) COlow

sensor

4) NOlow sensor

5) NO sensor

6) CO sensor

7) O2 sensor (standard)

... the right flue gas sampling probe for every measurement task

The sensor can be changed or upgraded in an additional gasparameter by the user directlyon-site... The main advantage of this is thatadjustment data is saved in the gassensors. In this way, time-consuming test gas adjustmentwhen changing sensors isdispensed with.

The automatically controlledmeasurement gas pump built intotesto 340 is the ideal solution fortypical situations which arise whenmeasuring flue gas such asnegative or positive pressure (from-200 to +50 mbar). Pump flow isautomatically kept constant.

Increased safety thanks to abuilt-in condensate trap The Testo design eliminates thepossibility of condensationaccumulating in the actual gassensor. testo 340 warns if thecondensation trap needs to beemptied.

A wide fuel selection is available18 standard fuels and 10 additionaluser-defined fuels can be matchedspecifically to each application.

Bigger selection...Different probe shaft lengths,diameters and temperature rangesensure high flexibility for allapplications. To change, the probeshaft is simply attached to theprobe handle and snaps into place.

Special flue gas probes for industrialengines are designed for positivepressure at the measurement site

and also makes measurements inthe toughest conditions possible. In

addition, modular industrial probesare available for rugged processconditions.

Ready-to-operate immediately The highly robust fast-action probecoupling for all gas paths eliminatesany mix-ups. The indestructiblegas sampling hose cannot bebent, can be extended up to7.8 m and saves space. The

probe can remain positionedin the flue gas during the

zeroing phase of the gas sensors. The calibration phase of testo 340 isfinished after only 30 seconds.

testo 340 is fitted with an O 2 sensor as standard. Three additional toxicgas sensors such as CO, CO low, NO, NO low, NO2 or SO 2 can be selectedby the user. This guarantees highest flexibility when adapting to changingapplications and measurement jobs.

testo 340 means:Simply select, change and add to,at any time, the gas sensorsrequired. For this purpose, selectfrom these 7 pre-calibrated gassensors:

Space for 4 gas sensors

The right solution for every application...

testo 340 Best support in flue gas analysis

More flexibility thanks to thepowerful, automaticallycontrolled diaphragm pump for measurements on differentsystems.

8/12/2019 Brochure Testo 340

4/8

4

testo 340 The ideal tool for service, maintenance and inspections

Your low-budget entry into industrial emission measurement

For service and maintenance work on industrial burners and furnaces

testo 340's high measurement accuracy and easy handlingenable efficient and reliable "emission checks" for fastassessment of industrial combustion systems:

Spot measurements for up to two hourstesto 340 can independently run 5 user-definedmeasurement programs. Spot measurements of up tomax. two hours are therefore possible. Measurement isalso possible "online' using Bluetooth or a USB cable.

Simultaneous differential pressure measurementSimultaneous measurement of flue gas and flow velocityallows calculation of current mass flow.

At different measurement points in your systemBattery operation possible thanks to battery life of morethan six hours.

Highest flexibility in the selection of sensorsEquipped with an O 2 sensor as standard, 3 additional gasparameters can be freely selected from the following 6:CO, CO low, NO, NO low, NO 2 and SO 2.

testo 340 offers many technical functions for safe andefficient commissioning, tuning, efficiency optimizationn andtroubleshooting when servicing industrial burners:

Direct display of air ratio and efficiency All relevant combustion and calculation parameters foroptimum tuning are clearly shown in the display.

Measuring range extension and automatic sensor protectionWhen commissioning burners or carrying outmeasurements on unfamiliar systems, very highconcentrations can occur unexpectedly. In cases likethese, the measuring range extension is automaticallyactivated. This protects the sensor, as the load placed on itis no higher than at low concentrations.

Always ready for use even in rough daily work The robust housing protects the analyzer from impact.

Ideal order suggestion for this applicationtesto 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carrystrap, equipped with O2 sensor and built-in flow/differential pressure measurementOption: CO (H2 compensated) measurement module, 0 to 10,000 ppm

0632 3340

Part no.

0393 1100Flue gas probe, modular, 335 mm immersion depth, incl. probe stop, thermocoupleNiCr-Ni (TI) Tmax 500C and hose 2.2 m

0600 9766

100-240 V AC / 6.3 V DC international mains unit 0554 1096

Option: BLUETOOTH module 0440 0784

BLUETOOTH printer set with wireless Bluetooth interface, incl. 1 roll thermal paper,rechargeable battery and mains unit

0554 0553

Transport case for analyzer and probes 0516 3400

Ideal order suggestion for this applicationtesto 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carrystrap, equipped with O2 sensor and built-in flow/differential pressure measurementOption: CO (H2 compensated) measurement module, 0 to 10,000 ppm

0632 3340

Flue gas probe, modular, 335 mm immersion depth, incl. probe stop, thermocoupleNiCr-Ni (TI) Tmax 1000C and hose 2.2 m

0600 8764

Part no.

0393 1100Option: NO measurement module, 0 to 3,000 ppm* 0393 1150

Option: SO2 measurement module, 0 to 5,000 ppm 0393 1250

"easyEmission" software with USB cable to connect instrument to PC 0554 3334Transport case for analyzer and probes 0516 3400*We recommend the NOlowsensor (0393 1152) to measure low NO values.

8/12/2019 Brochure Testo 340

5/8

5

Supports inspections and tuning work on stationary industrial engines...

...and for measurements on turbines

Versatile combination options of the different gas sensors intesto 340 offer you the highest level of flexibili ty inmeasurements on stationary engines:

Separate NO and NO 2 measurement The real NO X value is measured with the sensorcombination of NO and NO 2. In gas engines, the NO 2component of the NO X value can fluctuate greatly, soseparate measurement of both gases is necessary forcorrect NO X values.Measurements even at high CO concentrations

Even at unexpectedly high concentrations (up to 50,000ppm), automatic dilution of the sensor with fresh air allowsmeasurements even when the engine status is undefined,without negatively influencing the life expectancy of thesensor.Special flue gas probes for industrial engines asaccessories

These probes are highly heat-resistant and are speciallydesigned to compensate different pressure conditions, forexample in measurements before and after the catalyticconverter.Engine-specific parameters

The most important parameters for industrial engines suchas O 2, CO, NO, NO 2, NO X and Lambda can be displayedsimultaneously.

To reduce emissions from gas turbines, CO and NOmeasurements using testo 340 in low ranges are necessary.

The CO low and NO low sensors in testo 340 are ideally suitedto this task:

Special NO low sensor for low concentrations The NO low sensor for measurements on LowNO X turbinescan be freely combined with other sensors.

Measuring range extension and CO low sensor Thanks to the measuring range extension, the CO lowsensor can measure up to 2,500 ppm without anyproblems.

Easy and accurate test gas adjustment by the user If required, testo 340 can be easily adjusted with test gason site.

Ideal order suggestion for this applicationtesto 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carrystrap, equipped with O2 sensor and built-in flow/differential pressure measurementOption: CO (H2 compensated) measurement module, 0 to 10,000 ppm

0632 3340

Part no.

0393 1100Option: NO measurement module, 0 to 3,000 ppm 0393 1150Option: NO2 measurement module, 0 to 500 ppm 0393 1200Flue gas probe for industrial motors, 335 mm immersion depth, with probe stop, built-in condensate trap and heat protection plate, Tmax 1000 C, special hose for NO2 /SO2measurements, 2.2 m long*

0600 7560

Option: dilution of all sensors 0440 3350

Transport case for analyzer and probes 0516 3400"easyEmission" software with USB cable to connect instrument to PC 0554 3334

100-240 V AC / 6.3 V DC international mains unit 0554 1096

*We recommend the COlowsensor (0393 1102) for measuring low CO values.

*We recommend the flue gas probe with probe pre-filter (0600 7561) for measurements on stationary diesel engines.

Ideal order suggestion for this applicationtesto 340 flue gas analyzer incl. rechargeable battery, calibration protocol and carrystrap, equipped with O2 sensor and built-in flow/differential pressure measurementOption: CO (H2 compensated) measurement module, 0 to 10,000 ppm*

0632 3340

Flue gas probe for industrial motors, 335 mm immersion depth, with probe stop, built-in condensate trap and heat protection plate, Tmax 1000 C, special hose for NO2 /SO2measurements, 2.2 m long

0600 7560

Part no.

0393 1100Option: NOlowmeasurement module, 0 to 300 ppm 0393 1152

Option: NO2 measurement module, 0 to 500 ppm 0393 1200

100-240 V AC / 6.3 V DC international mains unit 0554 1096

Transport case for analyzer and probes 0516 3400"easyEmission" software with USB cable to connect instrument to PC 0554 3334

8/12/2019 Brochure Testo 340

6/8

6

Convenient measurement data management with "easyEmission"

Wireless reading out, transmission and printing of readings

The new communication interface: Bluetooth 2.0Wireless connection via Bluetooth 2.0 to testo BLUETOOTH printersand direct communication to Notebook/PC over a distance of up to 10m(free field) are features of the new testo 340 option. Readings andconfigurations are transmitted wirelessly to your Notebook/PC for storageand analysis.

Data can be read out, easily edited, filed and managed using"easyEmission" software:

Benefits of easyEmission:

Readings are shown in table or graph form

User-defined measurement spacing (from onemeasurement / second to one measurement / hour)

Online measurements via BLUETOOTH wirelesstransmission or USB connection

Customer and application-specific measurement logs

Data structure and measurement information can betransmitted from computer to analyzer

All instrument configurations and settings can be easilycarried out with easyEmission

Direct transmission to Excel and pdf formats

Easy implementation of individual formulae for your owncalculations

Calculation of fuel factors when using customer-specificfuels

testo printersPrint data is transmitted wirelesslyto the printer by infrared interface(visual contact required) or by newBLUETOOTH wirelesstransmission. This saves time sincethe analyzser is ready for use againimmediately following datatransmission.

*Country permits/BLUETOOTH

wireless transmission, see TechnicalData on page 7.

Wirelesstransmission*

Data communication That's how easy it is

8/12/2019 Brochure Testo 340

7/8

8/12/2019 Brochure Testo 340

8/8

0 9 8 1 5 8 5 4 / h d / A C / A / 1 2

. 2 0 0 9

S u

b j e c

t t o c

h a n g e w

i t h o u

t n o

t i c e .

Pitot tubes

Additional probe accessories

Industry probes

Analyzer / Options Part no.

Temperature probes

Accessories

Motor probestesto 340 ue gas analyzer incl. rechargeable battery, calibration protocol and carry strap,equipped with O2 sensor and built-in ow/differential pressure measurement

0632 3340

Mini ambient air probe, Tmax +80C, for separate ambient air temperature measurement0600 3692

Pipe wrap probe for pipes with diameter of up to 2", for ow/return temp. meas. inhydronic systems

0600 4593

Mini ambient air probe, 60 mm immersion depth, w. probe stop, magnetic clip, Tmax+100C, for dual wall clearance temp. meas. in systems w. outside primary air intakes

0600 9797

Pitot tube, 350 mm long, stainless steel, measures velocity speed

ISO calibration certicate velocity, hot wire, vane anemometer, Pitot tube; calibrationpoints 1; 2; 5; 10 m/s

Connection hose, silicone, 5m long, max. load 700 hPa (mbar)

ISO calibration certicate/Velocity, hot wire, vane anemometer, Pitot tube; calibrationpoints 5; 10; 15; 20 m/s

0635 2145

0520 0004

0554 0440

0520 0034

Pitot tube, 1000 mm long, stainless steel, measures velocity speed 0635 2345

Pitot tube, stainless steel, 350 mm long, measures ow speed with temperature, 3x hoses (5 m long) and heat protection plate

0635 2041

Pitot tube, stainless steel, 750 mm long, measures ow speed with temperature,3x hoses (5 m long) and heat protection plate

0635 2042

Option: CO (H2 compensated) measurement module, 0 to 10,000 ppm

testo 340 must be equipped with a second gas sensor otherwise the analyzer cannot function.Max. 3 additional sensors can be tted.

0393 1100

Option COlow(H2 compensated) measurement module, 0 to 500 ppm 0393 1102

Option: NO measurement module, 0 to 3,000 ppm 0393 1150

Option: NOlowmeasurement module, 0 to 300 ppm 0393 1152

Option: NO2 measurement module, 0 to 500 ppm 0393 1200

Option: SO2 measurement module, 0 to 5,000 ppm 0393 1250

Option: BLUETOOTH module 0440 0784

Option: dilution of all sensors 0440 3350

Adapter, non-heated 0600 7911Extension pipe to +600 C, stainless steel 1.4571 0600 7802

Extension pipe to +1200 C, Inconel 625 0600 7804

Non-heated sampling pipe to +600 C, stainless steel 1.4571 0600 7801

Non-heated sampling pipe to +1200 C, Inconel 625 0600 7803

Non-heated sampling pipe to +1800 C, Al-Oxide 0600 7805

Preliminary lter for dusty ue gases, ceramicPreliminary lter can only be mounted on extension pipe 0600 7802 or 0600 7804.

0554 0710

0554 3352

0430 0065

Gas sampling hose for accurate NO2 /SO2 measurements with built-in condensate trap,2.2 m long

0430 0066

Thermocouple, NiCr-Ni, -200 to +1200 C, Inconel 625, 1.2 m long

0430 0067

Thermocouple, NiCr-Ni, -200 to +1200 C, Inconel 625, 2.2 m long

Thermocouple, NiCr-Ni, -200 to +1200 C, Inconel 625, 3.2 m long

Mounting ange, stainless steel 1.4571, adjustable quick-action tting suitable for allsampling/extension pipes

0554 0760

Transport case for analyzer and probes100-240 V AC / 6.3 V DC international mains unit, for mains operation or battery chargingin instrument

"easyEmission" software with USB cable to connect instrument to PC

Multiple license/"easyEmission" software

Testo fast printer with wireless infrared interface, 1 roll thermal paper and 4 AA batteries

BLUETOOTH printer set with wireless Bluetooth interface, incl. 1 roll thermal paper,rechargeable battery and mains unit

Spare thermal paper for printer (6 rolls), permanent ink

Spare thermal paper for printer (6 rolls)

Charger for spare battery

Instrument cleaner (100 ml)

Spare particle lter (10 off) for probe handle

NO replacement lter, 1 off

CO replacement lter, 1 off

ISO calibration certicate/ue gas, calibration points 2.5% O2; 100 and 1000 ppm CO;800 ppm NO; 80 ppm NO2; 1000 ppm SO2

0516 34000554 1096

0554 3334

0554 3338

0554 0549

0554 0553

0554 0568

0554 0569

0554 1103

0554 1207

0554 3385

0554 4150

0554 4100

0520 0003

Part no.

Probe accesories/Standard gas sampling probes

Flue gas probe, modular, 335 mm immersion depth, incl. probe stop, thermocouple NiCr-Ni (TI) Tmax 500C and hose 2.2 m

Flue gas probe, modular, 700 mm immersion depth, incl. probe stop, thermocouple NiCr-Ni (TI) Tmax 500C and hose 2.2 m

Flue gas probe, modular, 335 mm immersion depth, incl. probe stop, thermocouple NiCr-Ni (TI) Tmax 1000C and hose 2.2 m

Flue gas probe, modular, 700 mm immersion depth, incl. probe stop, thermocouple NiCr-Ni Tmax 1000C and hose 2.2 m

Flue gas probe, modular, with preliminary lter, 335 mm immersion depth, incl. probestop, thermocouple NiCr-Ni (TI) Tmax 1000C and hose 2.2 m

Flue gas probe, modular, with preliminary lter, 700 mm immersion depth, incl. probestop, thermocouple NiCr-Ni (TI) Tmax 1000C and hose 2.2 m

0600 9766

0600 9767

0600 8764

0600 8765

0600 8766

0600 8767

Flue gas probe for industrial motors, 335 mm immersion depth, with probe stop, built-incondensate trap and heat protection plate, Tmax 1000 C, special hose for NO2 /SO2measurements, 2.2 m long

0600 7560

Flue gas probe for industrial motors with probe shaft prelter, 335 mm immersion depth,with probe stop, built-in condensate trap and heat protection plate, Tmax 1000 C,special hose for NO2 /SO2 measurements, 2.2 m long

0600 7561

Hose extension, 2.8 m, extension cable for probe and analyser

Probe shaft with preliminary lter, 335 mm long, with probe stop, 8 mm, Tmax 1000 C

Probe shaft with preliminary lter, 700 mm long, with probe stop, 8 mm, Tmax 1000 C

Spare sintered lter (2 off)

Probe shaft, 700 mm long, with probe stop, 8 mm, Tmax 500 C

Probe shaft, 335 mm long, with probe stop, 8 mm, Tmax 1000 C

Probe shaft, 700 mm long, with probe stop, 8 mm, Tmax 1000 C

0554 1202

0554 8766

0554 8767

0554 3372

0554 9767

0554 8764

0554 8765

Thermocouple for exhaust gas temperature measurement (NiCr-Ni, length 400 mm, Tmax.+1000 C), with 2.4 m connection cable and additional temperature protection

0600 8894

Spare particle lter (10 off) for condensate trap in gas sampling hose

Spare particle lter (10 off) for condensate trap in gas sampling hose

0554 3371

0554 3371

Spare sintered lter (2 off) 0554 3372

Part no.

Part no.

Standard gas sampling probes

Calibration Certificates

Modular ue gas probes, available in 2lengths, incl. probe stop, NiCr-Nithermocouple, 2.2 m hose and particlelter

Ordering dataPart no.Probes