BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

28
1 POTENZA TERMICA/HEATING CAPACITY: DA 27,2 A 50,14 KW POTENZA FRIGORIFERA/COOLING CAPACITY: DA 23,7 A 44,5 KW Generatore termico multifunzione per il riscaldamento, la climatizzazione e la produzione di acqua calda sanitaria per applicazioni residenziali e piccolo terziario. Multifunctional heat generator for heating, air conditioning and hot water production for residential and small commercial. Dati tecnici e dimensioni non sono impegnativi. La Thermocold Costruzioni s.r.l si riserva di apportare le modifiche ritenute opportune senza darne avviso. Technical data and dimensions are not binding. Thermocold Costruzioni s.r.l reserves the rights for changes and/or modifications without notice. SISTEMA QUALITÀ CERTIFICATO ISO 9001:2008

description

 

Transcript of BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

Page 1: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

1

POTENZA TERMICA/HEATING

CAPACITY:

DA 27,2 A 50,14 KW

POTENZA

FRIGORIFERA/COOLING

CAPACITY:

DA 23,7 A 44,5 KW Generatore termico multifunzione per il riscaldamento, la climatizzazione e la

produzione di acqua calda sanitaria per applicazioni residenziali e piccolo terziario.

Multifunctional heat generator for heating, air conditioning and hot water production for residential and small commercial.

Dati tecnici e dimensioni non sono impegnativi. La Thermocold Costruzioni s.r.l

si riserva di apportare le modifiche ritenute opportune senza darne avviso.

Technical data and dimensions are not binding. Thermocold Costruzioni s.r.l

reserves the rights for changes and/or modifications without notice.

SISTEMA QUALITÀ CERTIFICATO ISO 9001:2008

Page 2: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

2

Generatore termico multifunzione con compressori scroll ad iniezione di liquido per produzione di acqua calda fino a 65°C

Multifunctional heat generator with liquid injection scroll compressors with production of

hot water up to 65°C.

La macchina è una speciale pompa di calore che consta di due scambiatori acqua: uno

principale che funge da condensatore per la produzione di acqua calda per il riscaldamento e da evaporatore per la produzione di acqua refrigerata per la

climatizzazione; un secondo scambiatore che funge da recuperatore per la produzione di acqua calda (p.e. ad uso sanitario) in tutte le stagioni.

L’impiego di nuove tecnologie di compressione e il continuo sviluppo della tecnologia multifunzione, permettono di superare le frontiere attuali e fornire temperature di

produzione dei fluidi per la climatizzazione invernale e ACS, ancora più elevate anche a bassissime temperature permettendo l’utilizzo di elementi radianti a oltre 60°C anche

con temperature invernali di -25°C.

The unit is a special heat pump consists of two water heat exchangers the first is

serving as a main condenser for hot water production or heating and evaporator for the production of chilled water for air conditioning and a second heat exchanger which acts

as a regenerator for the production of hot water (for example for domestic use) in all

seasons.

The use of new compression technologies and the continuous development of multifunctional technology, allow us to overcome the current limits and provide water

production temperatures for space heating and hot sanitary water, even higher also at very low temperatures, up to 60°C allowing the use of radiant elements, even with

winter temperatures down to -25 ° C.

RANGE DI FUNZIONAMENTO ESTESO- EXTENDED OPERATING RANGE

Traditional compressors R410a Liquid injection scroll compressors R410a

Page 3: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

3

Temperatura di produzione dell’acqua fino

a 65°C. / Temperature hot water production up to 65°C

Circolatori ad inverter/ Inverter circolators

(Optional)

Produzione di acqua calda sanitaria

gratuita nel periodo estivo / Free hot sanitary water in summer mode

La possibilità di impostare a richiesta dell’utente sul lato sanitario temperature

fino a 65°C garantisce tutto l’anno che l’acqua calda sanitaria mantenga le

caratteristiche organolettiche imposte da

prescrizioni legislative e normative. The possibility to set user’s requests

on the sanitary plant of temperatures up to 65°C, guarantees that

throughout the year sanitary hot water has the organoleptic characteristics

prescribed by the regulations in force.

Page 4: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

4

EXTENDED OPERATIVE RANGE

-25°C ARIA E +65°C IN CLIMATIZZAZIONE E ACS

OUTDOOR TEMP. DOWN TO -25°C AND + HOT WATER TEMP. UP TO 65°C

TEMPERATURE DI PRODUZIONE DELL’ACQUA PIÙ ELEVATE A BASSE TEMPERATURE

OUTLET WATER TEMP. HIGHER AT LOW OUTDOOR TEMPERATURE

RADIATORI ACQUA A 55°C E TEMP. EST. -20°C /RADIATORS AT 55°C AND OUT. TEMP. -20°C

RADIATORI ACQUA A 60°C E TEMP. EST. -16°C /RADIATORS AT 60°C AND OUT. TEMP. -16°C

RADIATORI ACQUA A 62°C E TEMP. EST. - 5°C /RADIATORS AT 62°C AND OUT. TEMP. -5°C

TERMINALI ACQUA A 45°C E TEMP. EST. -25°C

TERMINALS AT 45°C AND OUT. TEMP. -25°C

PANNELLI RADIANTI ACQUA A 35°C E TEMP. EST. -25°C

RADIANT PANELS AT 35°C AND OUT. TEMP. -16°C

ELEVATA EFFICIENZA ENERGETICA / HIGH ENERGY EFFICIENCY

COP>4,1 (UNI EN 14511:2008)

ACQUA CALDA SANITARIA GRATUITA IN ESTATE

HOT SANITARY WATER DURING SUMMER

ALL IN ONE SENZA VALVOLA A TRE VIE PER ACS

ALL IN ONE WITHOUT THREE WAY VALVE FOR HSW

ANTILEGIONELLA AUTOMATIC CIRCUIT

Page 5: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

5

MARA EXR rappresenta per Thermocold la linea di prodotti multifunzione dedicati al mercato residenziale e piccolo terziario.

MARA EXR represents for Thermocold the line of multifunction products to the

residential market and small businesses.

| CARATTERISTICHE STANDARD

Le unità MARA sono macchine studiate per produrre acqua calda . fino a 65°C per riscaldamento, acqua fredda a 7°C per raffreddamento e . fino a 65°C per la produzione sanitaria. Le macchine sono progettate per gestire 3 cicli MARA di funzionamento: 1 Produzione di acqua calda ad alta temperatura sullo

scambiatore condensatore per servire utenze calde sia civili

che di processo. 2 Produzione di acqua calda ad alta temperatura sullo scambiatore recuperatore, per servire utenze sanitarie. 3 Produzione di acqua refrigerata sullo scambiatore evaporatore, per servire utenze sia civili che di processo. COMPRESSORE SCROLL Le unità sono dotate di compressore ermetico scroll ad iniezione

di liquido, caratterizzato da elevate prestazioni, ridotte vibrazioni e contenute emissioni sonore. L’ efficienza volumetrica è garanzia di valori del COP elevati. Il motore elettrico, raffreddato dal refrigerante in aspirazione, è dotato di protezione termica interna a reinserzione automatica. TELAIO E COVER

Mobile in acciaio zincato verniciato che conferisce alla macchina un’elevata resistenza alla corrosione. Il pannello frontale è facilmente asportabile per accedere a tutti i componenti

interni e permettere le operazioni di manutenzione con estrema facilità. SCAMBIATORE A PACCO ALETTATO Le unità ad aria MARA EXR sono dotate di scambiatore di calore

a pacco alettato con tubi in rame a rigatura interna ed alette corrugate in alluminio che consente di ottenere una maggiore capacità di scambio termico a parità di superficie. Lo scambiatore a pacco alettato è installato nella versione ad aria, nella versione ad acqua la batteria è sostituita da uno scambiatore a piastre. VENTILATORI SEZIONE CONDENSANTE/EVAPORANTE

Le unità sono dotate di ventilatori sezione condensante di tipo assiale, bilanciati staticamente e dinamicamente, azionati da motori elettrici di tipo chiuso con protezione termica interna. I ventilatori sono presenti solo nella versione ad aria. SCAMBIATORI A PIASTRE Scambiatori di calore acqua ad espansione diretta, del tipo a piastre saldobrasate in AISI 316, isolato esternamente con

materassino anticondensa a celle chiuse, dotato di resistenza elettrica antigelo comandata da termostato e pressostato differenziale acqua. VALVOLA DI ESPANSIONE ELETTRONICA Le unità sono equipaggiate con valvola di espansione elettronica controllata da un controllore PID che segue la variazione del

ciclo frigorifero, incrementando le prestazioni energetiche della macchina. Questa permette l’ adattamento tempestivo del ciclo di funzionamento anche alle minime variazioni di carico dell’ impianto evitando sprechi di energia nei tempi morti.

| STANDARD FEATURES MARA units machines are designed to produce hot water up to 65 ° C for heating, chilled water for cooling to 7 ° C and 65 ° C for the production health. The machines are designed to handle MARA 3 cycles of functioning: 1 Production of hot water at high temperature on the heat exchanger condenser utilities to serve both civilian and hot process. 2 Production of hot water at high temperature on the heat recovery unit to serve health care consumers. 3 Production of refrigerant water on the heat exchanger evaporator, to serve both civilian and process utilities. SCROLL COMPRESSOR The units are equipped with hermetic liquid injection scroll compressor, characterized authorized by high-performance, low vibration and noise contained. The volumetric efficiency is a guarantee of COP high values. The electric motor is cooled by the refrigerant suction, is equipped with internal thermal protection with automatic reset. FRAME AND COVER Painted galvanized steel cabinet to the machine that gives a high resistance to corrosion. The front panel is easily removable for access to all internal components and to allow maintenance operations, but with extreme ease. FINNED BLOCK EXCHANGER The Mara Exr units are equipped with heat exchanger coil with inner grooved copper tubes and aluminum . ns in aluminum allows for greater heat exchange capacity in the same area. The exchange sector-. nned version is installed in the air, as water to the battery is replaced by a plate heat exchanger. CONDENSER/EVAPORATOR FAN SECTION The units are . tted with condensing section of axial fans, statically and dynamically, driven by electric motors with a closed internal thermal protection. The fans are only present in the air version. PLATE HEAT EXCHANGERS Heat exchangers, water direct expansion type brazed plate in AISI 316, externally insulated with anti-cell closed, with antifreeze heater switch and differential pressure. ELECTRONIC EXPANSION VALVE The units are equipped with electronic expansion valve controlled by a PID controller which follows the variation in the cooling cycle, increasing the energy performance of the machine. The electronic expansion valve allows quick adjustment of the operating cycle at the lowest load variations and avoid waste of energy during downtime.

Page 6: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

6

CIRCUITO FRIGO

Il circuito frigorifero è realizzato interamente in rame e comprende: • Valvola di espansione elettronica; • Pressostati di alta e bassa pressione; • Rubinetto d’intercettazione sulla linea liquido; • Carica di refrigerante; • Ricevitore di liquido;

• Valvola a quattro vie per l’inversione del ciclo; • Valvola di sicurezza alta pressione; • Elettrovalvola linea liquido; • Elettrovalvola per confirgurazione; • Trasduttori di pressione; • Filtro deidratatore;

• Sonda sullo scarico del compressore per monitoraggio

della temperatura di mandata. QUADRO ELETTRICO DI POTENZA E CONTROLLO Quadro elettrico realizzato in accordo alle normative CEI 44-5/IEC 204-2 comprensivo di: • contattori per il compressore ed i ventilatori;

• fusibili di protezione per il compressore; • fusibili di protezione per i motori dei ventilatori; • fusibili di protezione del circuito di controllo; • Controllo di condensazione. CIRCUITO IDRICO • Circolatore impianto a portata variabile di

climatizzazione; • Circolatore a portata variabile per produzione ACS; • Valvola sfogo aria automatica; • Vaso espansione per circuito climatizzazione e a.c.s..

REFRIGERANT CIRCUIT

The refrigeration circuit is made entirely of copper and includes: • Electronic expansion valve; • High and low pressure shut-off. valves on the line; • Liquid shut o. valve; • Refrigerant charge; • Liquid receiver;

• Four way valve for reversing the cycle; • Safety valve high pressure; • Liquid line solenoid valve; •Configuration solenoid valve • Pressure transducers; • Filter drier;

• Probe on the compressor discharge for the monitoring

of temperature. ELECTRIC CONTROL PANEL AND POWER Electric board made in accordance with standards CEI 44-5/IEC 204-2 including: • contactors for compressor and fans;

• fuses for the compressor; • fuses for the fan motors; • fuses for control circuit; • Condensing continuos control. WATER CIRCUIT • Air conditioning variable flow rate system water pump;

• HSW variable flow rate pump; • Automatic relief valve; • HSW and air conditioning system expansion tank .

Page 7: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

7

COMPRESSORI SCROLL A INIEZIONE DI LIQUIDO con rapporto di compressione ottimizzato per il funzionamento in pdc dotati di scheda elettronica di gestione e controllo anche remoto. LIQUID INJECTION SCROLL COMPRESSOR with optimized compression ratio for operation in pdc equipped with electronic card control with optional remote display.

VALVOLA DI ESPANSIONE ELETTRONICA in condizioni variabili, si riducono sia i rischi di liquido all’ingresso del compressore

quando la velocità diminuisce che l’eccessivo surriscaldamento; il driver ottimizza l’apertura della valvola secondo la pressione di condensazione, con ulteriori benefici in termini di risparmio energetico.

ELECTRONIC EXPANSION VALVE in variable conditions, we have the reduction both the risks of liquid at the compressor when the speed decreases that excessive superheating;

the driver optimizes the opening of the valve according to the condensation pressure, with further benefits in terms of energy savings.

SCAMBIATORI utenza climatizzazione e ACS a piastre saldobrasate in acciaio inox AISI 316 isolato termicamente, completi di resistenza antigelo e pressostato differenziale. HEAT EXCHANGER Air conditioning and HSW side heat exchangers, stainless steel AISI 316, brazed plate TYPE, insulated externally with complete antifreeze heater and differential pressure.

KIT IDRICO completo di pompe di circolazione a portata variabile, flussostato, valvola di sfiato aria, valvola di sicurezza (3 bar), manometro, rubinetto di carico e scarico impianto, vaso d’espansione. HIDRONIC KIT

complete with pumps with variable flow, flow switch , safety valve (3 bar), vent valve (3 bar), pressure gauge, filling and relief valve, expansion tank.

VENTILATORI ASSIALI

con modulazione continua della velocità dei ventilatori in funzione della pressione di condensazione ed evaporazione con pale a profilo alare estremamente silenzioso idoneo per applicazioni residenziali. AXIAL FANS with variable fan speed modulation according to the condensation and evaporation pressure with airfoil blades extremely silent suitable for residential applications.

DSP consente di fissare parametri differenziati di lavoro regolando il set-point per garantire temperature ottimizzate dell’acqua di alimentazione dei terminali d’utenza e fornendo sempre solo l’energia necessaria in funzione della temperatura dell’aria esterna.

DSP enables the setting of differentiated work parameters by adjusting the set-point to ensure optimized water terminals supply temperatures of users and providing always only the energy required function of the outside air temperature

Page 8: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

8

L’interfaccia del controllo garantisce :

Monitoraggio variabili analogiche di stato del

sistema (temperatura acqua in/out, pressioni di

lavoro);

Monitoraggio stato degli attuatori (ON/OFF

compressori, stato valvole e resistenze

antigelo,..);

Lettura codice allarme;

Attivazione della macchina nel ciclo desiderato;

Modifica parametri di funzionamento macchina

(a livelli diversificati a seconda della password

inserita);

Modifica tempistiche di sbrinamento (solo per

pompe di calore);

Modifica soglia di intervento resistenze antigelo;

The control interface provides:

Monitoring of analogical status variables of the

system (water temperature in / out, working

pressure);

Monitoring of the status of the actuators

(compressors on / off, valves and antifreeze

heater status,..);

Reading alarm code;

Activation of the machine in the desired cycle;

Changing of operating parameters of the

machine (with various levels depending on the

password entered);

Changing of defrosting timing (only for air

cooled heat pumps);

Changing of activation limit for antifreeze

heater.

Modify threshold antifreeze

S = sciolto /loose

M = montato/mounted

ACCESSORI ACCESSORIES

Pannello di controllo remoto Remote control display S

Gruppo di riempimento automatico Automatic water . filling S

Filtro acqua 1" Water strainer S

Flussostato 1/2" - 11 bar Flow switch ½” – 11 bar S

Antivibranti in gomma Rubber antivibration mounts S

Cuffia antineve Snow cap S

Controllo di sequenza e protezione mancanza fase Phase failure protection relay M

Limitatore di tensione Voltage limiter M

Circolatore ad inverter impianto di climatizzazione Air conditioning system inverter water pump M

Circolatore ad inverter per produzione ACS HSW inverter pump M

Batteria con alette preverniciate con vernice epossidica

Epoxy coated condensing coils fins M

Page 9: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

9

MARA EXR è un particolare gruppo dotato di due circuiti acqua, uno dedicato al comfort ambientale e l’altro alla

produzione di acqua calda sanitaria. Si distingue per l’innovativo circuito frigorifero ed evoluto sistema di controllo, che permettono di soddisfare tutte le esigenze degli impianti, sia di condizionamento che sanitari, in ogni stagione. Mara EXR is a special machine equipped with two water circuits, the first dedicated to the comfort and the second for sanitary water production. The innovative refrigerant circuit and the most sophisticated electronic control make the difference and allows to comply with all the requirements in every season. ESTATE - SUMMER INVERNO

FUNZIONAMENTO CHILLER + RECUPERO: Produzione di acqua refrigerata per il

condizionamento e acqua calda gratuita per il sanitario.

CHILLER+RECOVERY MODE: Chilled water production for conditioning

use and free hot sanitary water.

FUNZIONAMENTO SOLO CHILLER: Produzione di acqua refrigerata per il

condizionamento.

ONLY CHILLER MODE: Chilled water production for conditioning use.

FUNZIONAMENTO POMPA DI CALORE UTENZA IGIENICO SANITARIA: Produzione di acqua calda sanitaria.

HEAT PUMP MODE USERS SANITARY:

Hot sanitary water production.

Page 10: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

10

FUNZIONAMENTO POMPA DI CALORE + RECUPERO: Produzione di acqua calda per il

riscaldamento o per il sanitario (con priorità sull’utenza igenico sanitaria).

HEAT PUMP+RECUPERY MODE: Hot water production for heating use or

sanitary(with priority on the user hygienic health).

FUNZIONAMENTO POMPA DI CALORE:

Produzione di acqua calda per il riscaldamento.

HEAT PUMP MODE: Hot water production for heating use.

Page 11: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

11

La codifica dei prodotti MARA EXR è semplice in quanto le unità sono presenti in un unico allestimento e

segue la codifica adottata da Thermocold per le altre unità:

Encoding products MARA is simple because the units are present in a unique setting and follows the code

adopted by Thermocold for others units:

Prodotto-Product Campo-Field Significato-Meaning Codice-Code

MARA

1 Numero circuiti - Circuit number 1

2 Potenza frigorifera – Cooling power 23

3 Tipo compressore- Compressor type Z

4 Versione-Version MA

Campo 1 / Field 1

Campo 2 / Field 2 Campo 3 / Field 3 Campo 4 / Field 4

Numero circuiti /

Circuit number

Potenza frigorifera

/Cooling capacity

Tipo compressore /

Compressor type

Versione / Setting

1 23 Z MA Campo 1 - Numero circuiti È il campo che indica il numero di circuiti frigoriferi con cui è realizzato il ciclo; il MARA possiede un circuito frigorifero innovativo in cui il numero di componenti preposti alle varie funzioni della macchina è stato minimizzato. It is the field which indicates the number of refrigerating circuits with which each cycle is realized; MARA has an

innovative refrigerating circuit whose number of components for each function has been minimized. Campo 2 - Potenza frigorifera È il campo che indica la potenza frigorifera nominale delle unità espressa in kW. It is the field which indicates the nominal cooling capacity of the units expressed in kW. Campo 3 - Tipo compressore

È il campo che indica il tipo di compressore installato a bordo macchina; sulle unità MARA si è scelto di utilizzare

compressori scroll ad iniezione di liquido, caratterizzati da elevata affidabilità e ridotte emissioni sonore. It indicates the type of compressor installed on the machine; on MARA units liquid injection scroll compressors are used. They are very reliable and have low sound emissions. Campo 4 - Versione MA Multifunzione condensato ad aria + ACS MA Condensed air multifunction + HSW

Page 12: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

12

NOTE/NOTES:

TAE

= temperatura aria esterna [°C] (bulbo secco/bulbo umido)/Outdoor air

temperature [°C] (dry bulb/wet bulb) (1b) ESEER calcolato per acqua prodotta a 18°C: sono state considerate le

condizioni ai carichi parziali definite da Eurovent per acqua prodotta a 7°C

/ ESEER calculated for water produced at 18°C (partial load

conditions defined by Eurovent for water produced at 7°C are

been considered) T

WC = temperatura acqua condensatore [°C] (climatizzazione invernale)/

Condenser water temperature [°C] (winter space heating) (2) TEP = Total Efficiency Performance T

WE = temperatura acqua evaporatore [°C] (climatizzazione estiva) / Recovery

water temperature [°C] (h.s.w.) (3a) FLI (Full Load Input) = potenza totale massima assorbita (compressori,

pompe e ventilatori) / Full Load Input: max total power input

(compressors, pumps and fans) T

WS = temperatura acqua recuperatore [°C] (acs) / Evaporator water

temperature [°C](hsw) (3b) FLA (Full Load Ampere) = corrente totale massima assorbita (compressori,

pompe e ventilatori) / Full Load Ampere: max total current

(compressors, pumps and fans) (1a) ESEER calcolato secondo Eurovent / ESEER calculated according to

Eurovent (4) calcolato secondo ISO 3744 a5 m di distanza dall’unità /calculated

according to ISO 3744 at 5m distance from the unit

TAE TWC TWS TWE 123 130 133 137 142 145

POTENZA TERMICA - HEATING CAPACITY 7/6,2 40/45 kW 27,2 31,5 35,8 41,1 46,2 50,1

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 7/6,2 40/45 kW 7,5 8,1 9,3 11,0 12,5 13,7

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 7/6,2 40/45 kW 8,1 9,3 10,5 12,2 13,7 14,9

COP 7/6,2 40/45 3,38 3,38 3,42 3,37 3,36 3,36

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 7/6,2 40/45 m³/h 4,7 5,4 6,2 7,1 7,9 8,6

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 7/6,2 40/45 kPa 56,5 25,3 32,5 42,7 39,3 46,2

POTENZA TERMICA ACS - HEATING CAPACITY HSW 7/6,2 40/45 kW 27,2 31,5 35,8 41,1 46,2 50,1

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 7/6,2 40/45 kW 7,5 8,1 9,3 11,0 12,5 13,7

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 7/6,2 40/45 kW 8,1 9,3 10,5 12,2 13,7 14,9

COP 7/6,2 40/45 3,38 3,38 3,42 3,37 3,36 3,36

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 7/6,2 40/45 m³/h 4,7 5,4 6,2 7,1 7,9 8,6

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 7/6,2 40/45 kPa 56,5 25,3 32,5 42,7 39,3 46,2

POTENZA FRIGORIFERA - COOLING CAPACITY 35/26 12/7 kW 23,7 29,4 32,2 36,4 41,2 44,5

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 35/26 12/7 kW 6,7 8,0 9,0 10,3 12,1 13,4

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 35/26 12/7 kW 7,3 9,2 10,2 11,5 13,3 14,6

EER 35/26 12/7 3,25 3,20 3,16 3,18 3,09 3,05

ESEER

¹ᵃ⁾ 12/7 3,81 3,74 3,69 3,72 3,62 3,57

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 35/26 12/7 m³/h 4,1 5,1 5,5 6,3 7,1 7,7

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 35/26 12/7 kPa 42,8 22,1 26,4 33,5 31,2 36,4

POTENZA FRIGORIFERA - COOLING CAPACITY 40/45 12/7 kW 23,7 29,4 32,2 36,4 41,2 44,5

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 40/45 12/7 kW 6,7 8,0 9,0 10,3 12,1 13,4

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 40/45 12/7 kW 6,7 8,0 9,0 10,3 12,1 13,4

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 40/45 12/7 m³/h 4,1 5,1 5,5 6,3 7,1 7,7

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 40/45 12/7 kPa 42,8 22,1 26,4 33,5 31,2 36,4

POTENZA TERMICA ACS - HEATING CAPACITY HSW 40/45 12/7 kW 30,4 37,4 41,3 46,6 53,3 57,9

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 40/45 12/7 kW 6,7 8,0 9,0 10,3 12,1 13,4

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 40/45 12/7 kW 6,7 8,0 9,0 10,3 12,1 13,4

PORTATA RECUPERATORE - WATER FLOW HEAT RECOVERY 40/45 12/7 m³/h 5,24 6,44 7,10 8,02 9,16 9,96

PERDITA DI CARICO RECUPERATORE - WATER PRESSURE DROP HEAT RECOVERY 40/45 12/7 kPa 70,61 35,81 43,23 54,95 52,29 61,57

MOER

²

40/45 12/7 8,03 8,36 8,15 8,10 7,80 7,65

TEP

³

12/7 6,64 6,83 6,71 6,66 6,47 6,37

SPECIFICA DI FUNZIONAMENTO

OPERATING SPECIFIACTIONS

MODELLI

MODELS

TERMINALI-TERMINALS

REGIME INVERNALE CLIMATIZZAZIONE- WINTER SPACE HEATING

REGIME INVERNALE CLIMATIZZAZIONE- WINTER SPACE HEATING + HOT SANITARY WATER

REGIME ESTIVO CLIMATIZZAZIONE - SUMMER AIR CONDITIONING

REGIME ESTIVO CLIMATIZZAZIONE + ACQUA CALDA SANITARIA - SUMMER AIR CONDITIONING + HOT SANITARY WATER

Page 13: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

13

NOTE/NOTES

TAE

= temperatura aria esterna [°C] (bulbo secco/bulbo umido)/Outdoor air

temperature [°C] (dry bulb/wet bulb) (1b) ESEER calcolato per acqua prodotta a 18°C: sono state considerate le

condizioni ai carichi parziali definite da Eurovent per acqua prodotta a 7°C

/ ESEER calculated for water produced at 18°C (partial load

conditions defined by Eurovent for water produced at 7°C are

been considered) T

WC = temperatura acqua condensatore [°C] (climatizzazione invernale)/

Condenser water temperature [°C] (winter space heating) (2) TEP = Total Efficiency Performance T

WE = temperatura acqua evaporatore [°C] (climatizzazione estiva) / Recovery

water temperature [°C] (h.s.w.) (3a) FLI (Full Load Input) = potenza totale massima assorbita (compressori,

pompe e ventilatori) / Full Load Input: max total power input

(compressors, pumps and fans) T

WS = temperatura acqua recuperatore [°C] (acs) / Evaporator water

temperature [°C](hsw) (3b) FLA (Full Load Ampere) = corrente totale massima assorbita (compressori,

pompe e ventilatori) / Full Load Ampere: max total current

(compressors, pumps and fans) (1a) ESEER calcolato secondo Eurovent / ESEER calculated according to

Eurovent (4) calcolato secondo ISO 3744 a5 m di distanza dall’unità /calculated

according to ISO 3744 at 5m distance from the unit

POTENZA TERMICA-HEATING CAPACITY 7/6,2 30/35 kW 27,9 32,3 36,70 42,2 47,37 51,43

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 7/6,2 30/35 kW 6,3 6,8 7,76 9,2 10,51 11,50

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 7/6,2 30/35 kW 6,81 7,80 8,76 10,22 11,51 12,50

COP 7/6,2 30/35 4,10 4,14 4,19 4,13 4,12 4,12

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 7/6,2 30/35 m³/h 4,8 5,6 6,3 7,3 8,1 8,8

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 7/6,2 30/35 kPa 59,5 26,7 26,7 44,9 41,4 48,6

POTENZA TERMICA ACS - HEATING CAPACITY HSW 7/6,2 40/45 kW 27,2 31,5 35,8 41,1 46,2 50,1

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 7/6,2 40/45 kW 7,5 8,1 9,3 11,0 12,5 13,7

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 7/6,2 40/45 kW 8,1 9,3 10,5 12,2 13,7 14,9

COP 7/6,2 40/45 3,38 3,38 3,42 3,37 3,36 3,36

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 7/6,2 40/45 m³/h 4,7 5,4 6,2 7,1 7,9 8,6

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 7/6,2 40/45 kPa 56,5 25,3 32,5 42,7 39,3 46,2

POTENZA FRIGORIFERA - COOLING CAPACITY 35/26 23/18 kW 30,70 38,13 41,77 47,12 53,31 57,66

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 35/26 23/18 kW 7,49 8,89 10,02 11,39 13,44 14,88

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 35/26 23/18 kW 7,99 9,89 11,02 12,39 14,44 15,88

EER 35/26 23/18 3,84 3,86 3,80 3,80 3,69 3,63

ESEER

¹ᵇ

23/18 4,49 4,51 4,45 4,45 4,32 4,25

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 35/26 23/18 m³/h 5,3 6,6 7,2 8,1 9,2 9,9

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 35/26 23/18 kPa 71,8 37,1 44,3 56,1 52,4 61,0

POTENZA FRIGORIFERA - COOLING CAPACITY 40/45 23/18 kW 32,2 40,0 43,9 49,5 56,0 60,6

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 40/45 23/18 kW 7,3 8,7 9,8 11,2 13,2 14,6

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 40/45 23/18 kW 7,3 8,7 9,8 11,2 13,2 14,6

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 40/45 23/18 m³/h 5,5 6,9 7,5 8,5 9,6 10,4

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 40/45 23/18 kPa 79,2 41,0 48,8 61,9 57,8 67,3

POTENZA TERMICA ACS- HEATING CAPACITY HSW 40/45 23/18 kW 39,6 48,8 53,7 60,6 69,2 75,1

POTENZA ASSORBITA COMPRESSORI - COMPRESSORS POWER INPUT 40/45 23/18 kW 7,3 8,7 9,8 11,2 13,2 14,6

POTENZA ASSORBITA TOTALE - TOTAL COMPRESSORS POWER INPUT 40/45 23/18 kW 7,3 8,7 9,8 11,2 13,2 14,6

PORTATA SCAMBIATORE - WATER FLOW HEAT EXCHANGER 40/45 23/18 m³/h 6,8 8,4 9,2 10,4 11,9 12,9

PERDITA DI CARICO SCAMBIATORE - WATER PRESSURE DROP HEAT EXCHANGER 40/45 23/18 kPa 122,0 62,0 74,8 74,7 90,2 106,0

MOER

²

40/45 23/18 9,79 10,20 9,93 9,87 9,50 9,31

TEP

³

23/18 8,06 8,32 8,17 8,11 7,87 7,74

REGIME INVERNALE CLIMATIZZAZIONE - WINTER SPACE HEATING + HOT SANITARY WATER

REGIME INVERNALE CLIMATIZZAZIONE - WINTER SPACE HEATING + HOT SANITARY WATER

REGIME ESTIVO CLIMATIZZAZIONE - SUMMER AIR CONDITIONING

REGIME ESTIVO CLIMATIZZAZIONE + ACQUA CALDA SANITARIA - SUMMER AIR CONDITIONING + HOT SANITARY WATER

PANNELLI RADIANTI - RADIANT PANELS

Page 14: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

14

NOTE/NOTES

TAE

= temperatura aria esterna [°C] (bulbo secco/bulbo umido)/Outdoor air

temperature [°C] (dry bulb/wet bulb) (1b) ESEER calcolato per acqua prodotta a 18°C: sono state considerate le

condizioni ai carichi parziali definite da Eurovent per acqua prodotta a 7°C

/ ESEER calculated for water produced at 18°C (partial load

conditions defined by Eurovent for water produced at 7°C are

been considered) T

WC = temperatura acqua condensatore [°C] (climatizzazione invernale)/

Condenser water temperature [°C] (winter space heating) (2) TEP = Total Efficiency Performance T

WE = temperatura acqua evaporatore [°C] (climatizzazione estiva) / Recovery

water temperature [°C] (h.s.w.) (3a) FLI (Full Load Input) = potenza totale massima assorbita (compressori,

pompe e ventilatori) / Full Load Input: max total power input

(compressors, pumps and fans) T

WS = temperatura acqua recuperatore [°C] (acs) / Evaporator water

temperature [°C](hsw) (3b) FLA (Full Load Ampere) = corrente totale massima assorbita (compressori,

pompe e ventilatori) / Full Load Ampere: max total current

(compressors, pumps and fans) (1a) ESEER calcolato secondo Eurovent / ESEER calculated according to

Eurovent (4) calcolato secondo ISO 3744 a5 m di distanza dall’unità /calculated

according to ISO 3744 at 5m distance from the unit

TAE TWC TWS TWE 123 130 133 137 142 145

NUMERO COMPRESSORI-NUMBERS OF COMPRESSORS 1 1 1 1 1 1

CIRCUITI FRIGORIFERI - REFRIGERANT CIRCIUITS 1 1 1 1 1 1

GRADINI DI PARZIALIZZAZIONE - PART LOAD 1 1 1 1 1 1

CARICA REFRIGERANTE - REFRIGERANT CHARGE kg 3,32 4,12 4,51 5,09 5,76 6,23

CARICA OLIO - OIL CHARGE lt 1,00 1,00 1,00 1,00 1,00 1,00

NUMERO VENTILATORI - NUMBERS OF FANS 2 2 2 2 2 2

PORTATA ARIA - AIR FLOW m3/h 8.536 15.840 15.840 14.708 14.708 14.708

POTENZA ASSORBITA TOTALE - TOTAL POWER INPUT kW 0,27 0,60 0,60 0,60 0,60 0,60

PORTATE ISTANTANEE DI UTILIZZO ACQUA CALDA SANITARIA DELTA T 45°C Tin

15°C - Tout 65°C lt/min' 8,5 9,7 11,2 12,8 14,4 15,7

PORTATE ISTANTANEE DI UTILIZZO ACQUA CALDA SANITARIA DELTA T 30°C Tin

15°C - Tout 45°C lt/min' 13,0 15,0 17,1 19,6 22,1 24,0

ACCUMULI (accessori)

CAPACITA' MINIMA ACCUMULO ACQUA UTENZE CLIMATIZZAZIONE lt 250,00 320,00 320,00 390,00 390,00 390,00

CAPACITA' MINIMA ACCUMULO ACQUA UTENZE SANITARIO lt 250,00 320,00 320,00 390,00 390,00 390,00

TEMPO DI RIGENERAZIONE DEL SERBATOIO SANITARIO DALLA TEMP. DI 45°C ALLA

TEMP. DI 65°min' 9,80 10,94 9,54 10,13 9,01 8,30

TEMPO DI RIGENERAZIONE DEL SERBATOIO SANITARIO DALLA TEMP. DI 30°C ALLA

TEMP. DI 45°Cmin' 9,61 10,63 9,36 9,93 8,84 8,14

kW 10,10 12,30 13,70 14,70 17,20 18,90

A 17,50 21,30 23,70 25,40 29,80 32,70

A 98,00 142,00 142,00 147,00 158,00 197,00

V/Ph/Hz

db (A) 50 52 52 52 52 52

db (A) 72 74 74 74 74 74

LUNGHEZZA - LENGTH mm 1300 1800 1800 1800 1800 1800

LARGHEZZA - DEEPTH mm 590 590 590 590 590 590

ALTEZZA - HEIGHT mm 1635 1635 1635 1635 1635 1635

PESO - WEIGHT kg 202 295 361 369 386 395

SPECIFICA DI FUNZIONAMENTO

OPERATING SPECIFIACTIONS

DIMENSIONI - DIMENSIONS

VENTILATORI - FANS

FLI MAX ⁽⁴ᵃ⁾

FLA MAX

⁽⁴

DATI ELETTRICI - ELECTRICAL DATA

SA MAX

ALIMENTAZIONE - POWER SUPPLY

LIVELLO DI PRESSIONE SONORO

- SOUND PRESSURE LEVEL

LIVELLO DI POTENZA SONORA - POWER LEVEL

DATI ACUSTICI - SOUND LEVEL

400/3/50

MODELLI

MODELS

COMPRESSORI - COMPRESSORS

PORTATE ACQUA DI UTILIZZO A.C.S.

Page 15: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

15

PRESTAZIONI IN MODALITA’ POMPA DI CALORE E RECUPERO

HEAT PUMP AND RECOVERY PERFORMANCE

Ta = Temperatura aria sterna-Outdoor temperature (°C) Twout = Temperatura acqua in uscita - Leaving water temperature (°C)

Pt = Potenza termica-Heating capacity (kW)

Pat = Potenza assorbita dai compressori -Compressors power input (kW)

qw = Portata acqua - Water flow (m3/h) dpw = Perdita di carico - Pressure drop (kPa)

30 35 40 45 55 65 30 35 40 45 55 65

Pt kW 13,8 13,9 14,0 14,1 14,5 16,0 16,1 16,2 16,3 16,8

Pat kW 4,7 5,4 5,9 6,5 7,8 5,0 5,8 6,4 7,0 8,4

qw m³/h 2,38 2,39 2,41 2,43 2,50 2,75 2,77 2,79 2,81 2,89

dpw kPa 14,6 14,8 15,0 15,2 16,1 6,5 6,6 6,7 6,8 7,2

Pt kW 18,4 18,1 18,1 18,1 18,3 21,3 21,0 21,0 21,0 21,2

Pat kW 5,1 5,7 6,3 6,9 8,4 5,5 6,1 6,8 7,5 9,1

qw m³/h 3,17 3,12 3,12 3,12 3,15 3,66 3,60 3,60 3,60 3,64

dpw kPa 25,9 25,0 25,0 25,0 25,6 11,6 11,2 11,2 11,2 11,5

Pt kW 23,8 23,6 23,4 23,2 22,8 23,1 27,6 27,3 27,1 26,9 26,4 26,7

Pat kW 5,5 6,0 6,6 7,3 9,0 10,9 5,9 6,5 7,1 7,9 9,7 11,7

qw m³/h 4,10 4,06 4,03 4,00 3,93 3,98 4,74 4,70 4,66 4,62 4,54 4,60

dpw kPa 43,3 42,6 41,8 41,1 39,7 40,8 19,4 19,1 18,8 18,4 17,8 18,3

Pt kW 28,6 27,9 27,5 27,2 26,6 26,7 33,1 32,3 31,8 31,5 30,8 30,9

Pat kW 5,8 6,3 6,9 7,5 9,3 11,3 6,3 6,8 7,5 8,1 10,0 12,2

qw m³/h 4,93 4,81 4,74 4,68 4,58 4,60 5,70 5,56 5,48 5,42 5,30 5,32

dpw kPa 62,5 59,5 57,8 56,5 54,1 54,5 28,0 26,7 25,9 25,3 24,2 24,4

Pt kW 31,0 30,4 29,5 29,1 28,4 28,4 35,9 35,2 34,2 33,7 32,9 32,9

Pat kW 5,9 6,4 7,0 7,7 9,4 11,4 6,4 6,9 7,6 8,3 10,1 12,3

qw m³/h 5,34 5,24 5,08 5,01 4,89 4,89 6,17 6,05 5,87 5,80 5,66 5,66

dpw kPa 73,4 70,6 66,5 64,7 61,6 61,6 32,9 31,6 29,8 29,0 27,6 27,6

30 35 40 45 55 65 30 35 40 45 55 65

Pt kW 18,2 18,3 18,4 18,5 19,1 20,9 21,0 21,2 21,3 21,9

Pat kW 5,8 6,6 7,3 8,0 9,6 6,8 7,9 8,6 9,5 11,4

qw m³/h 3,12 3,15 3,17 3,19 3,28 3,59 3,61 3,64 3,66 3,77

dpw kPa 6,5 6,6 6,7 6,8 7,2 11,0 11,1 11,3 11,5 12,1

Pt kW 24,2 23,8 23,8 23,8 24,1 27,8 27,3 27,3 27,3 27,7

Pat kW 6,3 7,0 7,8 8,5 10,4 7,4 8,3 9,2 10,1 12,3

qw m³/h 4,16 4,10 4,10 4,10 4,14 4,78 4,70 4,70 4,70 4,76

dpw kPa 11,6 11,2 11,2 11,2 11,5 19,5 18,9 18,9 18,9 19,3

Pt kW 31,3 31,0 30,8 30,5 30,0 30,4 36,0 35,7 35,4 35,1 34,5 34,9

Pat kW 6,8 7,4 8,1 9,0 11,0 13,4 8,0 8,8 9,7 10,7 13,1 15,9

qw m³/h 5,39 5,34 5,29 5,25 5,16 5,23 6,19 6,13 6,08 6,03 5,93 6,00

dpw kPa 19,4 19,1 18,8 18,4 17,8 18,3 32,7 32,1 31,6 31,1 30,0 30,8

Pt kW 37,6 36,7 36,2 35,8 35,0 35,1 43,2 42,2 41,6 41,1 40,2 40,3

Pat kW 7,1 7,8 8,5 9,3 11,4 13,9 8,5 9,2 10,1 11,0 13,5 16,5

qw m³/h 6,47 6,31 6,22 6,15 6,02 6,04 7,43 7,25 7,15 7,07 6,91 6,94

dpw kPa 28,0 26,7 25,9 25,3 24,2 24,4 47,2 44,9 43,6 42,7 40,8 41,1

Pt kW 40,8 40,0 38,8 38,3 37,4 37,4 46,8 45,9 44,6 44,0 42,9 42,9

Pat kW 7,3 7,9 8,6 9,5 11,5 14,0 8,6 9,4 10,3 11,3 13,7 16,6

qw m³/h 7,01 6,88 6,68 6,58 6,43 6,43 8,06 7,90 7,67 7,56 7,38 7,38

dpw kPa 32,9 31,6 29,8 29,0 27,6 27,6 55,5 53,3 50,2 48,9 46,5 46,5

133 137

Twout Twout

-20°C

123 130

Twout TwoutTa

0°C

-10°C

0°C

7°C

10°C

Ta

-20°C

-10°C

7°C

10°C

Page 16: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

16

PRESTAZIONI IN MODALITA’ POMPA DI CALORE E RECUPERO

HEAT PUMP AND RECOVERY PERFORMANCE

Ta = Temperatura aria sterna-Outdoor temperature (°C) Twout = Temperatura acqua in uscita - Leaving water temperature (°C)

Pt = Potenza termica-Heating capacity (kW)

Pat = Potenza assorbita dai compressori -Compressors power input (kW)

qw = Portata acqua - Water flow (m3/h) dpw = Perdita di carico - Pressure drop (kPa)

Ta

142 145

Twout Twout

30 35 40 45 55 65 30 35 40 45 55 65

-20°C

Pt kW 23,4 23,6 23,8 23,9 24,6 25,4 25,6 25,8 26,0 26,7

Pat kW 7,8 9,0 9,8 10,8 13,0 8,5 9,8 10,8 11,9 14,3

qw m³/h 4,03 4,06 4,09 4,12 4,23 4,38 4,41 4,44 4,47 4,60

dpw kPa 10,1 10,3 10,4 10,6 11,2 11,9 12,1 12,2 12,4 13,1

-10°C

Pt kW 31,2 30,7 30,7 30,7 31,1 33,9 33,4 33,4 33,4 33,7

Pat kW 8,5 9,5 10,5 11,5 14,1 9,3 10,4 11,5 12,6 15,4

qw m³/h 5,37 5,29 5,29 5,29 5,34 5,83 5,74 5,74 5,74 5,80

dpw kPa 18,0 17,4 17,4 17,4 17,8 21,1 20,4 20,4 20,4 20,9

0°C

Pt kW 40,4 40,1 39,7 39,4 38,7 39,2 43,9 43,5 43,1 42,8 42,0 42,6

Pat kW 9,2 10,0 11,0 12,2 14,9 18,1 10,0 10,9 12,1 13,3 16,3 19,8

qw m³/h 6,95 6,89 6,83 6,77 6,66 6,75 7,55 7,48 7,42 7,36 7,23 7,32

dpw kPa 30,1 29,6 29,1 28,6 27,6 28,4 35,3 34,7 34,2 33,6 32,4 33,3

7°C

Pt kW 48,6 47,4 46,7 46,2 45,2 45,3 52,7 51,4 50,7 50,1 49,0 49,2

Pat kW 9,7 10,5 11,5 12,5 15,4 18,8 10,6 11,5 12,6 13,7 16,9 20,6

qw m³/h 8,35 8,15 8,03 7,94 7,77 7,80 9,07 8,85 8,72 8,62 8,43 8,47

dpw kPa 43,5 41,4 40,2 39,3 37,6 37,9 51,0 48,6 47,2 46,2 44,1 44,5

10°C

Pt kW 52,6 51,6 50,1 49,4 48,2 48,2 57,1 56,0 54,4 53,6 52,4 52,4

Pat kW 9,8 10,7 11,7 12,9 15,6 19,0 10,8 11,7 12,8 14,1 17,1 20,8

qw m³/h 9,05 8,88 8,61 8,50 8,29 8,29 9,83 9,64 9,35 9,23 9,00 9,00

dpw kPa 51,1 49,1 46,2 45,0 42,9 42,9 60,0 57,7 54,3 52,8 50,3 50,3

Page 17: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

17

PRESTAZIONI IN MODALITA’ CHILLER CHILLER PERFORMANCE

Twout = Temperatura acqua in uscita - Leaving water temperature (°C)

Pf = Potenza frigorifera-Cooling capacity (kW)

Pa = Potenza assorbita dai compressori -Compressors power input (kW)

qw = Portata acqua - Water flow (m3/h) dpw = Perdita di carico - Pressure drop (kPa)

25 30 32 35 40 45 25 30 32 35 40 45

Pf kW 24,7 23,6 23,2 22,6 21,4 20,4 30,7 29,3 28,8 28,0 26,6 25,3

Pa kW 5,6 6,1 6,3 6,6 7,3 8,0 6,7 7,2 7,4 7,9 8,7 9,4

qw m³/h 4,26 4,06 3,99 3,88 3,68 3,50 5,29 5,04 4,95 4,82 4,57 4,35

dpw kPa 46,7 42,4 40,9 38,8 34,9 31,6 24,1 21,9 21,2 20,0 18,1 16,3

Pf kW 25,3 24,2 23,8 23,1 22,0 20,9 31,4 30,1 29,6 28,7 27,4 25,9

Pa kW 5,7 6,2 6,4 6,7 7,3 8,1 6,8 7,3 7,6 8,0 8,7 9,6

qw m³/h 4,35 4,17 4,09 3,97 3,79 3,59 5,40 5,18 5,09 4,93 4,71 4,46

dpw kPa 48,6 44,7 43,2 40,6 37,0 33,2 25,2 23,1 22,3 21,0 19,1 17,2

Pf kW 25,9 24,8 24,4 23,7 22,6 21,4 32,2 30,9 30,3 29,4 28,0 26,6

Pa kW 5,7 6,3 6,5 6,7 7,4 8,1 6,8 7,4 7,7 8,0 8,8 9,7

qw m³/h 4,45 4,27 4,20 4,08 3,88 3,68 5,53 5,31 5,22 5,06 4,82 4,57

dpw kPa 51,1 47,0 45,5 42,8 38,8 34,9 26,4 24,3 23,5 22,1 20,0 18,1

Pf kW 28,0 26,7 26,3 25,6 24,3 23,1 34,8 33,2 32,7 31,8 30,2 28,7

Pa kW 5,9 6,5 6,6 6,9 7,6 8,3 7,0 7,7 7,9 8,2 9,0 9,9

qw m³/h 4,81 4,60 4,53 4,40 4,18 3,97 5,98 5,71 5,62 5,47 5,20 4,93

dpw kPa 59,7 54,4 52,7 49,9 45,1 40,6 30,9 28,2 27,3 25,8 23,3 21,0

Pf kW 31,4 30,1 29,7 28,8 27,4 26,0 39,0 37,4 36,8 35,8 34,0 32,3

Pa kW 6,3 6,7 6,9 7,3 8,0 8,6 7,4 8,0 8,2 8,7 9,4 10,2

qw m³/h 5,41 5,17 5,10 4,96 4,70 4,47 6,71 6,42 6,34 6,16 5,84 5,55

dpw kPa 75,3 68,9 67,0 63,3 57,0 51,5 38,9 35,6 34,7 32,7 29,5 26,6

Pf kW 33,6 32,3 31,6 30,7 29,3 27,9 41,8 40,1 39,3 38,1 36,4 34,6

Pa kW 6,6 7,0 7,2 7,5 8,1 8,9 7,8 8,3 8,6 8,9 9,7 10,6

qw m³/h 5,78 5,55 5,44 5,28 5,05 4,79 7,18 6,89 6,76 6,56 6,27 5,96

dpw kPa 86,1 79,3 76,3 71,8 65,6 59,2 44,5 41,0 39,4 37,1 33,9 30,6

25 30 32 35 40 45 25 30 32 35 40 45

Pf kW 33,7 32,1 31,5 30,7 29,1 27,7 38,0 36,2 35,6 34,6 32,9 31,3

Pa kW 7,5 8,1 8,4 8,9 9,8 10,6 8,5 9,3 9,5 10,1 11,1 12,1

qw m³/h 5,79 5,52 5,42 5,28 5,01 4,76 6,53 6,23 6,12 5,95 5,65 5,38

dpw kPa 28,8 26,2 25,2 23,9 21,5 19,5 36,5 33,2 32,0 30,3 27,3 24,7

Pf kW 34,4 33,0 32,4 31,4 30,0 28,4 38,8 37,2 36,5 35,4 33,8 32,1

Pa kW 7,6 8,3 8,5 9,0 9,8 10,8 8,7 9,4 9,7 10,3 11,1 12,2

qw m³/h 5,91 5,67 5,57 5,40 5,16 4,89 6,67 6,40 6,28 6,09 5,82 5,51

dpw kPa 30,0 27,6 26,6 25,0 22,8 20,5 38,0 34,9 33,7 31,7 28,9 26,0

Pf kW 35,2 33,8 33,2 32,2 30,7 29,1 39,7 38,1 37,5 36,4 34,6 32,9

Pa kW 7,6 8,4 8,6 9,0 9,9 10,9 8,7 9,5 9,8 10,3 11,2 12,4

qw m³/h 6,06 5,82 5,72 5,55 5,28 5,01 6,84 6,56 6,45 6,26 5,95 5,65

dpw kPa 31,5 29,0 28,1 26,4 23,9 21,5 39,9 36,8 35,5 33,5 30,3 27,3

Pf kW 38,1 36,4 35,8 34,8 33,1 31,4 43,0 41,0 40,4 39,3 37,3 35,4

Pa kW 7,9 8,6 8,9 9,3 10,1 11,2 9,0 9,8 10,1 10,5 11,5 12,7

qw m³/h 6,55 6,26 6,16 5,99 5,69 5,40 7,39 7,06 6,95 6,75 6,42 6,09

dpw kPa 36,8 33,6 32,5 30,8 27,8 25,0 46,6 42,5 41,2 39,0 35,2 31,7

Pf kW 42,8 40,9 40,3 39,2 37,2 35,4 48,2 46,2 45,5 44,2 42,0 39,9

Pa kW 8,4 9,0 9,3 9,8 10,6 11,5 9,5 10,3 10,5 11,1 12,1 13,1

qw m³/h 7,36 7,04 6,94 6,74 6,40 6,08 8,30 7,94 7,83 7,61 7,22 6,86

dpw kPa 46,4 42,5 41,3 39,0 35,2 31,8 58,8 53,8 52,4 49,4 44,6 40,2

Pf kW 45,7 43,9 43,0 41,8 39,9 37,9 51,6 49,5 48,6 47,1 45,0 42,8

Pa kW 8,8 9,4 9,6 10,0 10,9 11,9 10,0 10,7 11,0 11,4 12,4 13,5

qw m³/h 7,87 7,55 7,40 7,18 6,87 6,52 8,88 8,52 8,35 8,10 7,75 7,36

dpw kPa 53,1 48,9 47,0 44,3 40,5 36,5 67,3 62,0 59,6 56,1 51,3 46,3

133 137

Temperature aria esterna -

Outdoor temperature

Temperature aria esterna - Outdoor

temperature

5

123 130

Temperature aria esterna -

Outdoor temperature

Temperature aria esterna - Outdoor

temperatureTwout

6

6

7

10

15

18

Twout

5

7

10

15

18

Page 18: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

18

PRESTAZIONI IN MODALITA’ CHILLER

CHILLER PERFORMANCE

Twout = Temperatura acqua in uscita - Leaving water temperature (°C)

Pf = Potenza frigorifera-Cooling capacity (kW)

Pa = Potenza assorbita dai compressori -Compressors power input (kW)

qw = Portata acqua - Water flow (m3/h) dpw = Perdita di carico - Pressure drop (kPa)

25 30 32 35 40 45 25 30 32 35 40 45

Pf kW 43,0 41,0 40,3 39,2 37,2 35,4 46,5 44,3 43,5 42,4 40,2 38,2

Pa kW 10,1 10,9 11,3 11,9 13,1 14,3 11,2 12,1 12,5 13,2 14,5 15,8

qw m³/h 7,39 7,05 6,92 6,74 6,39 6,08 7,99 7,62 7,49 7,29 6,92 6,58

dpw kPa 34,0 31,0 29,9 28,3 25,5 23,0 39,7 36,1 34,8 32,9 29,7 26,9

Pf kW 43,9 42,1 41,3 40,1 38,3 36,3 47,5 45,5 44,7 43,3 41,4 39,2

Pa kW 10,3 11,1 11,4 12,1 13,1 14,5 11,3 12,3 12,6 13,4 14,5 16,0

qw m³/h 7,55 7,24 7,11 6,89 6,58 6,24 8,16 7,83 7,69 7,46 7,12 6,75

dpw kPa 35,5 32,6 31,5 29,6 27,0 24,2 41,4 38,0 36,7 34,5 31,4 28,2

Pf kW 45,0 43,2 42,4 41,2 39,2 37,2 48,6 46,7 45,9 44,5 42,4 40,2

Pa kW 10,3 11,3 11,6 12,1 13,3 14,6 11,3 12,5 12,8 13,4 14,7 16,2

qw m³/h 7,73 7,42 7,30 7,08 6,74 6,39 8,37 8,03 7,89 7,66 7,29 6,92

dpw kPa 37,3 34,3 33,2 31,2 28,3 25,5 43,4 40,0 38,7 36,4 32,9 29,7

Pf kW 48,6 46,4 45,7 44,4 42,2 40,1 52,6 50,2 49,4 48,1 45,7 43,3

Pa kW 10,6 11,6 11,9 12,4 13,6 15,0 11,7 12,8 13,2 13,8 15,1 16,6

qw m³/h 8,36 7,98 7,86 7,64 7,27 6,89 9,04 8,64 8,50 8,26 7,86 7,46

dpw kPa 43,5 39,7 38,5 36,4 32,9 29,6 50,7 46,3 44,8 42,4 38,3 34,5

Pf kW 54,6 52,2 51,5 50,0 47,5 45,1 59,0 56,5 55,7 54,1 51,4 48,8

Pa kW 11,3 12,1 12,4 13,1 14,3 15,5 12,5 13,4 13,8 14,5 15,8 17,1

qw m³/h 9,39 8,98 8,86 8,61 8,17 7,77 10,15 9,72 9,58 9,31 8,84 8,40

dpw kPa 54,9 50,3 48,9 46,2 41,6 37,6 64,0 58,6 57,0 53,8 48,5 43,8

Pf kW 58,4 56,0 54,9 53,3 51,0 48,4 63,2 60,6 59,4 57,7 55,1 52,4

Pa kW 11,8 12,6 12,9 13,4 14,6 16,0 13,0 13,9 14,3 14,9 16,2 17,7

qw m³/h 10,04 9,64 9,45 9,17 8,76 8,33 10,86 10,42 10,22 9,92 9,48 9,01

dpw kPa 62,8 57,9 55,6 52,4 47,9 43,2 73,2 67,4 64,8 61,0 55,8 50,3

Temperature aria esterna -

Outdoor temperature

Temperature aria esterna - Outdoor

temperature

142 145

Twout

10

15

18

5

6

7

Page 19: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

19

PRESTAZIONI IN MODALITA’ CHILLER + RECUPERO

CHILLER + RECOVERY PERFORMANCE

Twout = Temperatura acqua in uscita - Leaving water temperature (°C)

Pf = Potenza frigorifera-Cooling capacity (kW)

Pa = Potenza assorbita dai compressori -Compressors power input (kW)

qw = Portata acqua - Water flow (m3/h) dpw = Perdita di carico - Pressure drop (kPa) qwr = Portata acqua recuperatore - Water flow recovery (m3/h) dpwr = Perdita di carico recuperatore - Pressure drop revovery (kPa)

30 35 40 45 55 65 30 35 40 45 55 65

Pf kW 24,8 23,9 23,3 22,4 20,6 18,3 30,9 29,7 28,9 27,9 25,6 22,7

Pa kW 5,1 5,6 6,1 6,6 8,0 9,8 6,1 6,6 7,2 7,8 9,5 11,6

Pt kW 30,0 29,4 29,3 29,1 28,6 28,1 36,9 36,3 36,1 35,7 35,1 34,3

qw m³/h 4,27 4,11 4,00 3,86 3,55 3,15 5,31 5,10 4,97 4,80 4,41 3,91

dpw kPa 47,1 43,5 41,2 38,4 32,4 25,5 24,3 22,5 21,3 19,9 16,8 13,2

qwr m³/h 5,15 5,07 5,04 5,00 4,92 4,83 6,35 6,24 6,21 6,14 6,03 5,91

dpwr kPa 77,6 71,7 68,0 63,3 53,5 42,1 39,4 36,4 34,5 32,1 27,1 21,3

Pf kW 25,5 24,5 23,9 23,1 21,2 18,9 31,7 30,5 29,7 28,7 26,4 23,4

Pa kW 5,2 5,6 6,1 6,7 8,0 9,9 6,1 6,7 7,3 7,9 9,5 11,7

Pt kW 30,7 30,1 30,0 29,7 29,3 28,7 37,8 37,1 36,9 36,6 35,9 35,1

qw m³/h 4,39 4,22 4,11 3,97 3,65 3,25 5,45 5,24 5,11 4,93 4,54 4,03

dpw kPa 49,6 45,8 43,5 40,5 34,3 27,1 25,7 23,7 22,5 21,0 17,8 14,0

qwr m³/h 5,27 5,19 5,16 5,12 5,03 4,94 6,50 6,39 6,35 6,29 6,18 6,05

dpwr kPa 81,8 75,6 71,8 66,9 56,7 44,8 41,5 38,4 36,4 33,9 28,7 22,7

Pf kW 26,2 25,2 24,5 23,7 21,8 19,5 32,5 31,3 30,5 29,4 27,1 24,2

Pa kW 5,2 5,7 6,2 6,7 8,1 9,9 6,2 6,7 7,3 8,0 9,6 11,8

Pt kW 31,4 30,9 30,7 30,4 29,9 29,4 38,7 38,0 37,8 37,4 36,8 36,0

qw m³/h 4,50 4,33 4,22 4,08 3,76 3,35 5,59 5,38 5,24 5,06 4,67 4,16

dpw kPa 52,2 48,3 45,9 42,8 36,3 28,8 27,0 25,0 23,7 22,1 18,8 14,9

qwr m³/h 5,40 5,31 5,28 5,24 5,15 5,06 6,65 6,54 6,50 6,44 6,32 6,19

dpwr kPa 86,2 79,7 75,7 70,6 59,9 47,6 43,7 40,4 38,4 35,8 30,4 24,1

Pf kW 26,9 25,8 25,2 24,3 22,5 20,1 33,4 32,1 31,3 30,2 27,9 24,9

Pa kW 5,2 5,7 6,2 6,8 8,2 10,0 6,2 6,8 7,4 8,1 9,7 11,9

Pt kW 32,1 31,6 31,4 31,1 30,6 30,1 39,6 38,9 38,7 38,3 37,6 36,8

qw m³/h 4,62 4,45 4,33 4,19 3,86 3,45 5,74 5,52 5,38 5,20 4,80 4,28

dpw kPa 55,0 50,9 48,4 45,2 38,4 30,6 28,4 26,3 25,0 23,4 19,9 15,8

qwr m³/h 5,52 5,43 5,41 5,36 5,27 5,17 6,81 6,69 6,66 6,59 6,47 6,33

dpwr kPa 90,7 84,0 79,8 74,5 63,4 50,5 46,0 42,6 40,5 37,8 32,1 25,6

Pf kW 27,5 26,5 25,9 25,0 23,1 20,7 34,2 32,9 32,1 31,0 28,7 25,7

Pa kW 5,3 5,8 6,3 6,9 8,3 10,1 6,3 6,8 7,5 8,2 9,8 12,0

Pt kW 32,8 32,3 32,2 31,9 31,3 30,8 40,5 39,8 39,6 39,2 38,5 37,6

qw m³/h 4,74 4,56 4,45 4,30 3,97 3,55 5,89 5,67 5,53 5,34 4,93 4,41

dpw kPa 57,8 53,6 51,0 47,6 40,6 32,5 29,9 27,7 26,4 24,6 21,0 16,8

qwr m³/h 5,65 5,55 5,53 5,48 5,39 5,29 6,96 6,84 6,81 6,74 6,62 6,47

dpwr kPa 95,4 88,4 84,1 78,5 67,0 53,6 48,4 44,8 42,6 39,8 34,0 27,2

Pf kW 28,2 27,2 26,5 25,7 23,7 21,3 35,1 33,8 33,0 31,9 29,5 26,4

Pa kW 5,3 5,8 6,4 6,9 8,3 10,2 6,3 6,9 7,5 8,2 9,9 12,1

Pt kW 33,6 33,0 32,9 32,6 32,1 31,4 41,4 40,7 40,5 40,1 39,4 38,5

qw m³/h 4,86 4,68 4,56 4,41 4,08 3,66 6,03 5,81 5,67 5,48 5,07 4,55

dpw kPa 60,8 56,4 53,7 50,2 42,9 34,5 31,4 29,2 27,8 25,9 22,2 17,8

qwr m³/h 5,77 5,68 5,66 5,61 5,51 5,41 7,12 7,00 6,97 6,90 6,77 6,62

dpwr kPa 100,3 93,0 88,5 82,8 70,8 56,9 50,8 47,2 44,9 42,0 35,9 28,9

Pf kW 37,3 35,7 34,0 32,2 28,8 26,2 46,4 44,3 42,2 40,0 35,8 32,5

Pa kW 6,1 6,5 6,8 7,3 8,7 10,4 7,3 7,7 8,1 8,7 10,3 12,4

Pt kW 43,5 42,2 40,8 39,6 37,5 36,6 53,7 52,0 50,3 48,8 46,1 44,8

qw m³/h 6,42 6,14 5,84 5,54 4,95 4,50 7,97 7,62 7,26 6,89 6,15 5,59

dpw kPa 106,1 97,0 87,9 79,2 63,1 52,1 54,9 50,2 45,5 41,0 32,7 27,0

qwr m³/h 7,48 7,25 7,02 6,81 6,45 6,29 9,23 8,95 8,65 8,39 7,93 7,71

dpwr kPa 168,2 151,7 136,1 122,0 96,7 76,9 85,4 77,1 69,2 62,0 49,2 39,1

18

6

7

8

9

10

5

130

Acqua uscita recuperatore

Heat recovery leaving water

temperatureTwout

123

Acqua uscita recuperatore

Heat recovery leaving water

temperature

Page 20: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

20

PRESTAZIONI IN MODALITA’ CHILLER + RECUPERO CHILLER + RECOVERY PERFORMANCE

Twout = Temperatura acqua in uscita - Leaving water temperature (°C)

Pf = Potenza frigorifera-Cooling capacity (kW)

Pa = Potenza assorbita dai compressori -Compressors power input (kW)

qw = Portata acqua - Water flow (m3/h) dpw = Perdita di carico - Pressure drop (kPa) qwr = Portata acqua recuperatore - Water flow recovery (m3/h) dpwr = Perdita di carico recuperatore - Pressure drop revovery (kPa)

30 35 40 45 55 65 30 35 40 45 55 65

Pf kW 33,8 32,5 31,6 30,5 28,1 24,9 38,1 36,7 35,7 34,5 31,7 28,1

Pa kW 6,8 7,4 8,1 8,8 10,7 13,1 7,8 8,5 9,2 10,1 12,1 14,9

Pt kW 40,7 39,9 39,8 39,4 38,7 38,0 45,9 45,1 44,9 44,5 43,8 43,0

qw m³/h 5,82 5,59 5,44 5,25 4,83 4,28 6,56 6,31 6,14 5,93 5,45 4,83

dpw kPa 29,0 26,8 25,4 23,7 20,0 15,7 36,8 34,0 32,2 30,0 25,4 19,9

qwr m³/h 6,99 6,87 6,84 6,77 6,66 6,54 7,90 7,76 7,73 7,65 7,53 7,39

dpwr kPa 47,5 43,9 41,6 38,8 32,8 25,8 47,5 43,9 41,6 38,8 32,8 25,8

Pf kW 34,7 33,4 32,5 31,4 28,9 25,7 39,2 37,7 36,7 35,4 32,6 29,0

Pa kW 6,9 7,5 8,2 8,9 10,8 13,2 7,8 8,5 9,3 10,2 12,2 15,0

Pt kW 41,6 40,9 40,7 40,3 39,6 38,9 47,0 46,2 46,0 45,6 44,8 44,0

qw m³/h 5,97 5,74 5,59 5,40 4,97 4,42 6,74 6,48 6,31 6,09 5,61 4,98

dpw kPa 30,6 28,3 26,8 25,0 21,2 16,7 38,8 35,8 34,0 31,7 26,8 21,2

qwr m³/h 7,16 7,03 7,00 6,94 6,82 6,69 8,08 7,95 7,91 7,84 7,71 7,56

dpwr kPa 50,1 46,3 43,9 41,0 34,7 27,4 50,1 46,3 43,9 41,0 34,7 27,4

Pf kW 35,6 34,3 33,4 32,3 29,7 26,5 40,2 38,7 37,7 36,4 33,5 29,9

Pa kW 7,0 7,6 8,3 9,0 10,9 13,3 7,9 8,6 9,4 10,3 12,3 15,1

Pt kW 42,6 41,9 41,7 41,3 40,6 39,8 48,1 47,3 47,1 46,6 45,9 45,0

qw m³/h 6,13 5,89 5,74 5,55 5,11 4,55 6,91 6,65 6,48 6,26 5,77 5,14

dpw kPa 32,2 29,8 28,3 26,4 22,4 17,8 40,8 37,8 35,9 33,5 28,4 22,5

qwr m³/h 7,32 7,20 7,17 7,10 6,98 6,84 8,27 8,13 8,10 54,95 7,89 7,74

dpwr kPa 52,8 48,8 46,4 43,2 36,7 29,1 52,8 48,8 46,4 43,2 36,7 29,1

Pf kW 36,5 35,2 34,3 33,1 30,6 27,3 41,2 39,7 38,7 37,4 34,5 30,8

Pa kW 7,0 7,7 8,3 9,1 11,0 13,4 8,0 8,7 9,5 10,3 12,4 15,2

Pt kW 43,6 42,8 42,6 42,2 41,5 40,7 49,2 48,4 48,2 47,7 46,9 46,0

qw m³/h 6,29 6,05 5,90 5,70 5,26 4,69 7,09 6,82 6,65 6,43 5,93 5,29

dpw kPa 33,9 31,4 29,8 27,9 23,7 18,9 43,0 39,8 37,8 35,3 30,0 23,9

qwr m³/h 7,49 7,37 7,33 7,26 7,14 7,00 8,46 8,32 8,28 8,21 8,07 7,91

dpwr kPa 55,5 51,4 48,9 45,6 38,8 30,9 55,5 51,4 48,9 45,6 38,8 30,9

Pf kW 37,5 36,1 35,2 34,0 31,4 28,1 42,3 40,7 39,7 38,4 35,4 31,7

Pa kW 7,1 7,7 8,4 9,2 11,1 13,5 8,0 8,8 9,6 10,4 12,6 15,3

Pt kW 44,5 43,8 43,6 43,2 42,5 41,6 50,3 49,5 49,3 48,8 48,0 47,1

qw m³/h 6,45 6,21 6,05 5,85 5,40 4,84 7,27 7,00 6,83 6,60 6,10 5,45

dpw kPa 35,7 33,1 31,4 29,4 25,0 20,1 45,2 41,9 39,8 37,2 31,7 25,4

qwr m³/h 7,66 7,53 7,50 7,43 7,30 7,16 8,65 8,51 8,47 8,40 8,26 8,09

dpwr kPa 58,4 54,1 51,5 48,1 41,0 32,8 58,4 54,1 51,5 48,1 41,0 32,8

Pf kW 38,4 37,0 36,1 34,9 32,3 29,0 43,3 41,8 40,7 39,4 36,4 32,7

Pa kW 7,1 7,8 8,5 9,3 11,2 13,6 8,1 8,8 9,7 10,5 12,7 15,5

Pt kW 45,5 44,8 44,6 44,2 43,4 42,6 51,4 50,6 50,4 49,9 49,1 48,1

qw m³/h 6,61 6,37 6,21 6,01 5,55 4,98 7,46 7,18 7,01 6,77 6,26 5,62

dpw kPa 37,5 34,8 33,1 30,9 26,5 21,3 47,5 44,1 41,9 39,2 33,5 27,0

qwr m³/h 7,83 7,71 7,67 7,60 7,47 7,32 8,85 8,70 8,67 8,59 8,44 8,28

dpwr kPa 61,4 56,9 54,2 50,7 43,3 34,8 61,4 56,9 54,2 50,7 43,3 34,8

Pf kW 50,8 48,6 46,2 43,9 39,2 35,6 57,3 54,8 52,1 49,5 44,2 40,1

Pa kW 8,2 8,7 9,1 9,8 11,6 13,9 9,3 9,9 10,4 11,2 13,2 15,8

Pt kW 59,0 57,2 55,3 53,7 50,8 49,5 66,6 64,6 62,5 60,6 57,4 56,0

qw m³/h 8,73 8,35 7,95 7,54 6,74 6,12 9,85 9,42 8,97 8,51 7,60 6,90

dpw kPa 65,5 59,9 54,2 48,8 38,9 32,1 82,9 75,8 68,7 61,9 49,3 40,7

qwr m³/h 10,15 9,84 9,52 9,23 8,74 8,52 11,46 11,12 10,75 10,43 9,88 9,63

dpwr kPa 103,0 92,9 83,4 74,8 59,3 47,2 103,0 92,9 83,4 74,7 59,3 47,1

18

7

8

9

10

133 137

Acqua uscita recuperatore

Heat recovery leaving water

temperature

Acqua uscita recuperatore

Heat recovery leaving water

temperature

6

5

Twout

Page 21: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

21

PRESTAZIONI IN MODALITA’ CHILLER + RECUPERO CHILLER + RECOVERY PERFORMANCE

Twout = Temperatura acqua in uscita - Leaving water temperature (°C)

Pf = Potenza frigorifera-Cooling capacity (kW)

Pa = Potenza assorbita dai compressori -Compressors power input (kW)

qw = Portata acqua - Water flow (m3/h) dpw = Perdita di carico - Pressure drop (kPa) qwr = Portata acqua recuperatore - Water flow recovery (m3/h) dpwr = Perdita di carico recuperatore - Pressure drop revovery (kPa)

30 35 40 45 55 65 30 35 40 45 55 65

Pf kW 43,2 41,5 40,4 39,0 35,8 31,8 46,7 44,9 43,7 42,2 38,8 34,4

Pa kW 9,2 10,0 10,9 11,9 14,3 17,6 10,1 11,1 12,0 13,1 15,8 19,5

Pt kW 52,3 51,5 51,3 50,8 50,1 49,4 56,8 55,9 55,7 55,3 54,6 53,8

qw m³/h 7,42 7,13 6,95 6,70 6,16 5,47 8,03 7,72 7,51 7,25 6,67 5,91

dpw kPa 34,3 31,7 30,1 28,0 23,7 18,6 40,0 37,0 35,0 32,6 27,6 21,7

qwr m³/h 9,00 8,85 8,82 8,75 8,62 8,49 9,77 9,62 9,58 9,51 9,39 9,26

dpwr kPa 57,5 53,1 50,4 46,9 39,6 31,2 67,7 62,5 59,3 55,2 46,7 36,7

Pf kW 44,3 42,6 41,5 40,1 36,9 32,8 47,9 46,1 44,9 43,3 39,9 35,4

Pa kW 9,2 10,1 11,0 12,0 14,4 17,7 10,2 11,2 12,2 13,3 16,0 19,6

Pt kW 53,6 52,7 52,5 52,0 51,3 50,5 58,2 57,2 57,0 56,6 55,8 55,0

qw m³/h 7,62 7,33 7,14 6,89 6,34 5,64 8,24 7,93 7,72 7,45 6,86 6,10

dpw kPa 36,2 33,5 31,7 29,6 25,1 19,8 42,2 39,0 37,0 34,5 29,2 23,1

qwr m³/h 9,21 9,06 9,03 8,95 8,82 8,68 10,00 9,84 9,81 9,73 9,61 9,47

dpwr kPa 60,6 56,0 53,2 49,5 42,0 33,1 71,3 66,0 62,6 58,3 49,4 39,0

Pf kW 45,5 43,7 42,6 41,2 37,9 33,8 49,2 47,3 46,1 44,5 41,0 36,5

Pa kW 9,3 10,2 11,1 12,1 14,6 17,8 10,3 11,3 12,3 13,4 16,1 19,7

Pt kW 54,8 53,9 53,7 53,3 52,5 51,6 59,5 58,6 58,4 57,9 57,1 56,3

qw m³/h 7,82 7,52 7,33 7,08 6,52 5,81 8,46 8,14 7,93 7,66 7,06 6,29

dpw kPa 38,1 35,3 33,5 31,2 26,5 21,0 44,4 41,1 39,0 36,4 30,9 24,5

qwr m³/h 9,42 9,27 9,24 9,16 9,03 8,88 10,23 10,07 10,04 9,96 9,83 9,68

dpwr kPa 63,8 59,0 56,1 52,3 44,4 35,2 75,1 69,5 66,0 61,6 52,3 41,5

Pf kW 46,6 44,9 43,8 42,3 39,0 34,8 50,5 48,6 47,3 45,7 42,2 37,7

Pa kW 9,4 10,3 11,2 12,2 14,7 18,0 10,4 11,4 12,4 13,5 16,3 19,9

Pt kW 56,0 55,2 55,0 54,5 53,7 52,8 60,9 59,9 59,7 59,2 58,4 57,6

qw m³/h 8,02 7,72 7,53 7,27 6,71 5,99 8,68 8,35 8,14 7,87 7,26 6,48

dpw kPa 40,1 37,1 35,3 32,9 28,0 22,4 46,7 43,3 41,1 38,4 32,7 26,0

qwr m³/h 9,64 9,49 9,45 9,37 9,24 9,08 10,47 10,31 10,27 10,19 10,05 9,90

dpwr kPa 67,2 62,2 59,1 55,2 46,9 37,4 79,1 73,2 69,6 65,0 55,3 44,1

Pf kW 47,8 46,1 44,9 43,4 40,1 35,9 51,7 49,8 48,6 47,0 43,4 38,8

Pa kW 9,5 10,4 11,3 12,3 14,8 18,1 10,5 11,5 12,5 13,7 16,4 20,0

Pt kW 57,3 56,4 56,2 55,7 54,9 54,0 62,2 61,3 61,1 60,6 59,8 58,9

qw m³/h 8,23 7,92 7,73 7,47 6,90 6,17 8,90 8,57 8,36 8,08 7,46 6,67

dpw kPa 42,2 39,1 37,2 34,7 29,6 23,7 49,2 45,6 43,3 40,5 34,5 27,6

qwr m³/h 9,86 9,70 9,67 9,59 9,45 9,29 10,70 10,54 10,51 10,42 10,28 10,12

dpwr kPa 70,6 65,5 62,3 58,2 49,6 39,7 83,2 77,1 73,3 68,5 58,4 46,8

Pf kW 49,0 47,2 46,1 44,6 41,2 37,0 53,0 51,1 49,8 48,2 44,6 40,0

Pa kW 9,5 10,4 11,4 12,5 15,0 18,3 10,6 11,6 12,6 13,8 16,6 20,2

Pt kW 58,6 57,7 57,5 57,0 56,2 55,2 63,6 62,7 62,5 62,0 61,1 60,2

qw m³/h 8,44 8,13 7,93 7,66 7,09 6,36 9,12 8,79 8,57 8,29 7,67 6,87

dpw kPa 44,3 41,1 39,1 36,6 31,3 25,2 51,7 47,9 45,6 42,6 36,5 29,3

qwr m³/h 10,08 9,92 9,89 9,81 9,66 9,50 10,94 10,78 10,74 10,66 10,51 10,35

dpwr kPa 74,2 68,9 65,5 61,3 52,4 42,1 87,4 81,1 77,2 72,2 61,7 49,6

Pf kW 64,8 62,0 59,0 56,0 50,0 45,4 70,1 67,0 63,8 60,6 54,1 49,1

Pa kW 11,0 11,6 12,3 13,2 15,6 18,7 12,2 12,9 13,6 14,6 17,3 20,7

Pt kW 75,8 73,6 71,2 69,2 65,6 64,1 82,3 79,9 77,4 75,1 71,4 69,8

qw m³/h 11,15 10,66 10,14 9,63 8,60 7,81 12,06 11,53 10,97 10,42 9,30 8,45

dpw kPa 77,4 70,8 64,1 57,8 46,1 38,0 90,2 82,5 74,7 67,3 53,7 44,3

qwr m³/h 13,04 12,66 12,25 11,89 11,29 11,03 14,16 13,75 13,30 12,92 12,27 12,01

dpwr kPa 124,4 112,2 100,6 90,2 71,5 56,8 146,4 131,9 118,4 106,0 84,1 66,8

18

7

8

9

10

142

Acqua uscita recuperatore

Heat recovery leaving water

temperature

Acqua uscita recuperatore

Heat recovery leaving water

temperature

5

6

Twout

145

Page 22: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

22

PRESTAZIONI IN MODALITA’ POMPA DI CALORE

HEAT PUMP AND RECOVERY PERFORMANCE

PRESTAZIONI IN MODALITA’ CHILLER+RECUPERO

CHILLER+RECOVERY PERFORMANCE

Page 23: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

23

PRESTAZIONI IN MODALITA’ CHILLER

CHILLER PERFORMANCE

Page 24: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

24

TABELLE DI CORREZIONE GLICOLE ETILENICO

ETHYLENIC GLYCOL CORRECTION TABLE

Per il calcolo delle prestazioni con soluzioni glicolate moltiplicare le grandezze significative per i

rispettivi coefficienti.

In order to calculate performance with glycoled solutions multiply main sizes by respective

coefficients.

PERCENTUALE GLICOLE IN FUNZIONE DELLA TEMPERATURA DI

CONGELAMENTO GLICOLE PERCENTAGE DEPENDING ON FREEZING TEMPERATURE

TABELLE DI CORREZIONE FATTORE DI INCROSTAZIONE SCALING CORRECTION TABLE

Per il calcolo delle prestazioni con soluzioni glicolate moltiplicare le grandezze significative per i

rispettivi coefficienti.

In order to calculate performance with glycoled solutions multiply main sizes by respective

coefficients.

5% 10% 15% 20% 25% 30% 35% 40%

Temperatura di congelamento

Freezing temperature °C -2 -3,9 -6,5 -8,9 -11,8 -15,6 -19 -23,4

Limite consigliato di sicurezza

suggested safety limit °C 3 1 -1 -4 -6 -10 -14 -19

Coefficiente potenza frigorifera

Cooling capacity coefficient - 0,995 0,99 0,985 0,981 0,977 0,974 0,971 0,968

Coefficiente di potenza assorbita

Power input capacity - 0,997 0,993 0,99 0,988 0,986 0,984 0,982 0,981

Coefficiente di portata

Delivery coefficient - 1,003 1,01 1,02 1,033 1,05 1,072 1,095 1,124

Coefficiente delle perdite di carico

Load losses coefficient - 1,029 1,06 1,09 1,118 1,149 1,182 1,211 1,243

% In peso glicole etilenico

% (weight) ethylenic glycol

0°C -5°C -10°C -15°C -20°C -25°C

5% 12% 20% 28% 35% 40%

Percentuale glicole in funzione della temperatura di congelamento

Glicole percentage depending on freezing temperature

Temperatura di congelamento - Freezing temperature

Percentuale glicole etilenico - Etylenic Percentage

0,44 e-4

0,88 e-4

1,76 e-4

0,97 0,99

0,94 0,98

mq°C/WCoefficiente di correzione della potenza frigorifera

Cooling capacity correction coefficient

Coefficiente di correzione della potenza assorbita

Power input correction coefficient

1 1

Page 25: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

25

CURVE CARATTERISTICHE DELLE POMPE

PUMPS CHARACTERISTIC CURVES Circolatore per circuito climatizzazione estiva ed invernale+circolatore per circuito ACS

Air conditioning circuit water pump + Hot sanitary water circuit water pump

Page 26: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

26

SCHEMA IDRICO MARA VERSIONE CON ACCESSORI INCLUSI

WATER SCHEME MARA VERSION WITH ACCESSORIES INCLUDED

EWR

REC

T

T

T

T

VR

VR

VR

VR

RBRB

VRP4

P1

P1

T

M

DEHUMIDIFIERDEUMUDIFICATORE

T

M

T

ET VASO DI ESPANSIONE - EXPANSION VESSEL

- CLIMATIZATION WATER TANKSERBATOIO UTENZE CLIMATIZZAZIONESU

SR SERBATOIO UTENZE ACS - SANITARY WATER TANK

- RECOVERYRECUPEROREC

EWR EVAPORATORE/CONDENSATORE -EVAPORATOR / CONDENSER

- TEMPERATURE PROBESONDA DI TEMPERATURAT

M VALVOLA MISCELATRICE A 3 VIE - 3 WAY MIXING VALVE

- SHUTT OFF VALVEVALVOLA DI INTERCETTAZIONER

SF VALVOLA DI SFIATO - VENT VALVE

F RACCOGLITORE IMPURITA' - STEEL MESH STRAINER

- FILLING GROUPGRUPPO DI RIEMPIMENTOGR

SC SCARICO

- RECIRCULATION PUMP

P2 POMPA SECONDARIO - SECONDARY PUMP

- PRIMARY PUMPPOMPA PRIMARIOP1

- SAFETY VALVEVALVOLA DI SICUREZZASV

P3 POMPA RICIRCOLO

- DRAINAGE

Page 27: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

27

DIMENSIONI E INGOMBRI

SIZE AND OVERALL DIMENSIONS

MARA EXR 123Z

MARA EXR 130Z-145Z

6

590

510

300

300

1595

1635

401020135 135

1

4

3

2

5

300

1300

300

1800

6

590

510

300

300

1595

1635

401190300 300

1

4

3

2

5

Page 28: BOLLETTINO TECNICO_mara-exr-it-uk-rev02-0612_THERMOCOLD

28

Thermocold Costruzioni s.r.l. 70026 Modugno - Bari - Italy

Via dei Ciclamini 25 tel. +39.080.531.26.23

+39.080.531.25.62 fax +39.080.531.25.60

E-mail [email protected] Web site www.thermocold.it

BT.MARA_EXR.E.MK.REV02.0612.IT.UK