Post on 13-Jul-2020
VW219 VOLKSWAGEN Crafter 2,0 CDI - MAN TGE 2.0 CDI Dal 2017 – motore 1968 cc – 4 cilindri – con A/C – trazione posteriore From 2017 – engine 1968 cc – 4 cylinders - with A/C – RWD Istruzioni di montaggio kit innesto elettromagnetico Electromagnetic coupling kit installation instructions
• Sollevare il veicolo utilizzando un adeguato ponte sollevatore • Raise the vehicle by using a suitable lift bridge
1
2 • Allentare la cinghia del motore • Smontare la ventola del radiatore • Smontare la puleggia del motore
• Loosen the engine belt • Disassemble the radiator fan • Disassemble the engine pulley
3 4
5
• Smontare la ventola e la puleggia dal supporto • Eliminare il mozzo M • Conservare lo spessore T
• Disassemble the fan and the pulley from the
support • Eliminate the hub M • Store the thickness T
6
• Inserire lo spessore T nel mozzo M1 fornito
• Montare il mozzo M1 , la ventola e la puleggia nel supporto originale
• Insert the thickness
T in the supplied M1 hub
• Mount the hub M1, the fan and the pulley in the original bracket
• Inserire la ventola completa di supporto nel suo spazio dietro al radiatore , senza , al momento fissare il supporto al motore
• Insert the complete support fan in its space behind the radiator, without, at the
moment, fixing the support to the motor
7
• Sovrapporre la puleggia fornita a quella originale e fissare con bulloni forniti
• Fissare la ventola col suo supporto nella posizione originale
• Overlap the provided pulley to the original one and fix it with bolts provided
• Fix the fan with its support in its original position
8
• Smontare le viti di fissaggio del tubo dello sfiatatoio dell’olio
• Spostare il tubo dello sfiatatoio olio • Eliminare le viti nei punti A B C D • Nel loro posto inserire il supporto
dell’innesto elettromagnetico e fissare con viti e distanziali forniti
• Remove the screws fixing the oil
breather pipe • Move the oil breather pipe • Remove the screws in points A B C D • In their place, insert the support of the
electromagnetic clutch and fix with screws and spacers provided
9 10
11 12 • Installare la frizione elettromagnetica e la pompa • Installare la cinghia , regolare la tensione delle cinghia
• Install the electromagnetic clutch and the pump • Install the belt , adjust the belt tension