DTTF in Cosmics Challenge - Istituto Nazionale di Fisica ... · PDF fileDTTF in Cosmics...
Transcript of DTTF in Cosmics Challenge - Istituto Nazionale di Fisica ... · PDF fileDTTF in Cosmics...
Bologna Meeting 24.01.2005 Janos Erö - HEPHY/Wien
DTTF in Cosmics ChallengeJanos Erö HEPHY/Vienna
Bologna Meeting 24.01.2005 Janos Erö - HEPHY/Wien
The Trigger ChainRPC
ResistivePlate
Chambers
CalorimeterTrigger
DTBXBarrel
CSCEndcap
PACTPattern
Comparator
BTIBunch & Time Id
TRACOTrack Correlator
Trigger Server
DTMuon TriggerTrack Finder
Wirecards
Stripcards
Motherboard
CSCMuon TriggerTrack Finder
DTSorter
CSCSorter
RPCSorter
CALReadout
CALRegionalTrigger
GLOBAL MUON TRIGGER
GLOBAL TRIGGER
GLOBAL CALORIMETER
TRIGGER
LuminosityDetector
MinimalConfiguration}
LLC Feedbackhow?where?who?
Feedback:as at Testbeam
MaximalistSolution
Bologna Meeting 24.01.2005 Janos Erö - HEPHY/Wien
Arrangement
How many Muon Stations per Sector?All fully assembled?All connected?
Main Sector
5 Neighbors
Due to Crate limitations no next wheel neighbor connection between sideways sectors
Bologna Meeting 24.01.2005 Janos Erö - HEPHY/Wien
Readout
● Spy Readout– As it was during Testbeam– Full access to all data– Slow readout - to accelerate
● Implement 16bit accesses to JTAG● Decrease bit counter accesses● Accelerate JTAG frequency (???)● Check VME Controller Driver
– Flexible timing
We hope for a 1kHz readout
● Standard DAQ Readout– DAQ interfaces ready– Tests with FED-Kit soon– Access only to DAQ data– Requires a fully functioning TTC!– Timing given by the full system
● With this solution one faces all Trigger Synchronization problems of the final system!
Bologna Meeting 24.01.2005 Janos Erö - HEPHY/Wien
Software
● S/W for Readout– Spy readout software exists
● minor overhaul necessary– DAQ readout should be written anyways for DCC test
● S/W for the Trigger Chain– Theoretically a Control S/W should exist for every Chain Member– Individual Control everywhere