Post on 24-Jul-2016
description
The Company
The
Com
pany
Etablished in 1923, Laminazione Sottile is the parent
company of Laminazione Sottile Group, specialized
in the production of rolled aluminium products.
After several years spent manufacturing closures and
paste-tubes, our company began a process of verti-
cal integration, startig with the rolling of aluminium.
During the ‘sixties, the manufacture of finished
products came to a halt, and the entire production
process was geared to the rolling of aluminium.
Since then we have not ceased to invest in human
resources, machinery and technology in order to
improve our performance.
3
The Factory
The factory is situated
in the south of Italy and
consists of an area of
160,00 square metres, of
which 60,000 are covered.
The integrated production
process, the modern and
flexible plant, and more
than 75 years
of experience enable
Laminazione Sottile to
offer rolled aluminium for
a wide range of techno-
logical applications. Our
technical experts are
always available to put
their knowledge and skills
at clients’ disposal for any
project.
It is the aim of our Com-
pany to become a global
supplier of a large number
of industrial factories
using rolled aluminium
world-wide
World Wide RolledAluminium Supplier
The Market
The
Mar
ket
Thanks to years spent researching implementation
of the performance capacity of our products, service
and new applications, Laminazione Sottile products
are now widely known and utilised the world over.
The daily aim of all the staff here in our Company is
to satisfy the customer. We are today proud to sup-
ply the most important and demanding companies
in the field of rolled aluminium applications over five
continents among our customers.
World Wide RolledAluminium Supplier
5
World Wide RolledAluminium Supplier
Continuous research
into new technology and
products, never-ending
attempts to improve the
quality of existing pro-
ducts and flexibility with
regards to production all
enable our company to
produce rolled aluminium
for an extensive range of
applications.
The main applications are:
Rigid Packaging
Semirigid Packaging
Flexible Packaging
Heat Exchange
Cookware
General Engineering
World Wide RolledAluminium Supplier
The Production
The
Prod
uctio
n
1
2
Aluminium
Is the earth’s most
Abundant metal element,
and represent about
eighth per cent
of the crust.
Aluminium is:
Non-toxic
Non – Magnetic
Non-Permeable
Opaque
Sterilizable
Recyclable
Tasteless
Odourless
Lightweight
Resistant Barrier
Corrosion Resistant
Thermal Conductor
Electrical Conductor
Ductile and Malleable
7
Laminazione Sottile has
An Integrated
Production cycle,
starting from
the melting process
and ends at the finished
product having passed
through processes
of hot rolling,
heat treatment,
surface treatment,
slitting and cutting
Process
There are seven production
Sectors:
1 Foundry
2 Hot Rolling
3 Cold Rolling
4 Annealing
5 Surface Treatment
6 Slitting and Cutting
7 Quality assurance
4
5
6
7
3
Alloys
Allo
ys
1050 0.25 0.4 0.05 0.05 0.05 0.05 - 0.03 0.03 - 99.5 min.
1060 0.25 0.35 0.05 0.03 0.03 0.05 - 0.03 0.03 - 99.6 min.
1100 0.95Fe+Si - 0.05-0.20 0.05 - 0.1 - - 0.05 0.15 99.0 min.
1200 1.0 Fe+Si - 0.05 0.05 - 0.1 - 0.05 0.05 0.15 99.0 min.
1230 0.7 Fe+Si - 0.1 0.05 0.05 0.1 - 0.03 0.03 - 99.3 min.
3003 0.6 0.7 0.05-0.2 1.0-1.5 - 0.1 - - 0.05 0.15 Rest
3003Z* 0.6 0.7 0.05-0.2 1.0-1.5 - 1.0-2.0 - - 0.05 0.15 Rest
3003R** 0.2-0.4 0.7 0.05 1.0-1.6 0.05-0.20 0.3-0.6 0,05 0,05 0,05 0.15 Rest
3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 0.25 - - 0.05 0.15 Rest
3005 0.6 0.7 0.3 1.0-1.5 0.2-0.6 0.25 0.1 0.1 0.05 0.15 Rest
3105 0.6 0.7 0.3 0.3-0.8 0.2-0.8 0.4 0.2 0.1 0.05 0.15 Rest
4005* 0.7-1.0 0.2-0.35 0.05 0.03 0.03 0.05 0.2 0.03 0.05 0.15 Rest
4006 0.8-1.2 0.5-0.8 0.1 0.05 0.01 0.05 0.2 - 0.05 - Rest
5005 0.3 0.7 0.2 0.2 0.5-1.1 0.25 0.1 - 0.05 0.15 Rest
5006 0,4 0,8 0,1 0,40-0,80 0,8-1,3 0,25 0,1 0,10 0,05 0,15 Rest
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.1 0.15-0.35 - 0.05 0.15 Rest
5754 0,4 0,4 0,1 0,5 2,6-3,6 0,2 0,3 0,15 0,05 0,15 Rest
6818*** 0.5-1.0 0.7 0.02-0.05 1.0-1.5 0.02-0.05 1.3-1.7 0.02 0.05 0.05 0.15 Rest
8009=8006 0.4 1.2-2.0 0.3 0.3-1.0 0.1 0.1 - - 0.05 0.15 Rest
8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.1 0.05 0.08 0.05 0.15 Rest
8079 0.05-0.3 0.7-1.3 0.05 - - 0.1 - - 0.05 0.15 Rest
Alloys Si Fe Cu Mn
COMPOSITION (%) ACCORDING TO AA
9
1050 0.25 0.4 0.05 0.05 0.05 0.05 - 0.03 0.03 - 99.5 min.
1060 0.25 0.35 0.05 0.03 0.03 0.05 - 0.03 0.03 - 99.6 min.
1100 0.95Fe+Si - 0.05-0.20 0.05 - 0.1 - - 0.05 0.15 99.0 min.
1200 1.0 Fe+Si - 0.05 0.05 - 0.1 - 0.05 0.05 0.15 99.0 min.
1230 0.7 Fe+Si - 0.1 0.05 0.05 0.1 - 0.03 0.03 - 99.3 min.
3003 0.6 0.7 0.05-0.2 1.0-1.5 - 0.1 - - 0.05 0.15 Rest
3003Z* 0.6 0.7 0.05-0.2 1.0-1.5 - 1.0-2.0 - - 0.05 0.15 Rest
3003R** 0.2-0.4 0.7 0.05 1.0-1.6 0.05-0.20 0.3-0.6 0,05 0,05 0,05 0.15 Rest
3004 0.3 0.7 0.25 1.0-1.5 0.8-1.3 0.25 - - 0.05 0.15 Rest
3005 0.6 0.7 0.3 1.0-1.5 0.2-0.6 0.25 0.1 0.1 0.05 0.15 Rest
3105 0.6 0.7 0.3 0.3-0.8 0.2-0.8 0.4 0.2 0.1 0.05 0.15 Rest
4005* 0.7-1.0 0.2-0.35 0.05 0.03 0.03 0.05 0.2 0.03 0.05 0.15 Rest
4006 0.8-1.2 0.5-0.8 0.1 0.05 0.01 0.05 0.2 - 0.05 - Rest
5005 0.3 0.7 0.2 0.2 0.5-1.1 0.25 0.1 - 0.05 0.15 Rest
5006 0,4 0,8 0,1 0,40-0,80 0,8-1,3 0,25 0,1 0,10 0,05 0,15 Rest
5052 0.25 0.4 0.1 0.1 2.2-2.8 0.1 0.15-0.35 - 0.05 0.15 Rest
5754 0,4 0,4 0,1 0,5 2,6-3,6 0,2 0,3 0,15 0,05 0,15 Rest
6818*** 0.5-1.0 0.7 0.02-0.05 1.0-1.5 0.02-0.05 1.3-1.7 0.02 0.05 0.05 0.15 Rest
8009=8006 0.4 1.2-2.0 0.3 0.3-1.0 0.1 0.1 - - 0.05 0.15 Rest
8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.1 0.05 0.08 0.05 0.15 Rest
8079 0.05-0.3 0.7-1.3 0.05 - - 0.1 - - 0.05 0.15 Rest
Mg Zn Cr Ti OthersEach
OthersTotal Al
(*) Not standard alloys(**) Not standard alloys – Plus: Sn = 0,03-0,07 Zr = 0,10-0,20(***) Not standard alloys – Plus: Zr = 0,05-0,20Composition in % max unless shown as range or min
AlloysNotes:
COMPOSITION (%) ACCORDING TO AA
Rigid Packaging
Rigi
d Pa
ckag
ing
11
Extra Deep CapsOmnia CapsPharma CapsPP Caps for Carbonate Drink
Main Alloys
Thicknesses
Surface finishing
Surface treatment
Thickness Tolerance
Strip Width range
Inside Diameter
Outside Diameter
Sheet Lenght range
Widht range
3003 3004 3005 3105 5052 5006 5754 8011
from 0,15 to a 0,50 mm
Mill finish on request bright roughness Ra<0,10 microns
Chemical degreasing and/or conversion treatment. Lacquered
on request
According to EN standard or better
from 20 to 1250 mm
70/75/150/200/300/400/500 mm
from 590 to 1180 mm
from 400 to 1900 mm
from 400 to 1250
Rigid Packaging Applications
Ring Pull CapsStandard PP CapsTear Off CapsCans and Easy-Open Lids
Semirigid Packaging
Sem
irigi
d Pa
ckag
ing
13
Semirigid Packaging ApplicationsAir-line food containersAshtraysCandle lightDose containersFolded Food Containers
Lids for containersPluri compartment containersStandard containersStiff containersTrays
Main Alloys
Thicknesses
Surface finishing
Surface Treatment
Thicknesses Tolerance
Strip Width range
Inside Diameter
Outside Diameter
1200 3003 3004 3005 3105 5052
8006/8009 8011 8079
from 0,030 to 0,40 mm
Mill finish on request bright roughness Ra <0,10 microns
Chemical degreasing / Cleaning (grade “A”) / no smell. Laquered on
request
According to AFCO or better
from 35 to 1250 mm
70/75/150/200/300 mm
from 590 to 1075 mm
Flexible Packaging
Flex
ible
Pac
kagi
ng
15
Flexible Packaging ApplicationsCaps for bottleConverter foilHousehold foilBlister
SealsYogurt lidsAdhesive tapes
Main Alloys
Thicknesses
Surface finishing
Surface Treatment
Thicknesses Tolerance
Strip Width range
Inside Diameter
Outside Diameter
1050 1200 8009 8079
from 7 to 40 microns (double rolled)
under 25 microns one side matt one side bright / from 25 to 40
microns bright both sides
Thermal degreasing/chemical degreasing for thicknesses > 30 microns
According to AFCO or better
from 100 to 1250 mm
70/76/150 mm
from 450 to 800 mm
Heat Exchangers
Heat
Exc
hang
ers
17
Heat Exchangers ApplicationsFinstock for car radiatorsFinstock Draw-TypeFinstock Drawless TypeRefrigerator PanelsRotary Heat Exchangers
Plate Heat ExchangersBrazed FinsVacuum Brazed FinsInert Gas Brazed FinsFlexible Tubes
Main Alloys
Thicknesses
Surface finishing
Surface Treatment
Thicknesses Tolerance
Strip Width range
Inside Diameter
Outside Diameter
1050 1100 1200 3003 3003R 3003Z 6818 8006/8009
8011 8079
from 0,07 to 0,4 mm
Mill finish on request bright roughness Ra<1,10 microns
Chemical degreasing and / or conversion treatment. Lacquered on
request
According to EN standard or better
from 20 to 1250 mm
70/75/150/200/300 mm
from 590 to 1075 mm
Cook Ware
Cook
War
e
19
Cook Ware ApplicationsDeep Drawing TanksLids
Pans and cooking tools
Main Alloys
Thicknesses
Surface finishing
Thicknesses Tolerance
Strip Width range
Inside Diameter
Outside Diameter
Circles Diameters
1050 1230 3003 3004 3105 4006 5005
from 0,5 to 6,0 mm
Mill finish roughness Ra 0,20 – 0,40 microns
According to EN standard or better
from 200 to 1250 mm
400/500/600 mm
from 940 to 1180 mm
100/110/120/128/130/133,5/135/140/147/150/155/158/160/175/
180/185/190/195/196,85/200/205/210/215/215,89/220/225/230/235/
240/245/247,65/250/255/260/265/270/275/280/285/290/295/298,4/
300/305/310/315/320/325/330335/340/345/350/355/360/365/
368,25/370/375/380/385/390/395/400/405/410/415/420/430/435/
440/445/450/455/465/469,88/470/475/480/485/490/495/500/505/
510/520/525/530/535/540/545/550/555/560/580/585/595/600/605/
610/620/625/630/635/645/650/660/670/680/685/690/700/710/
720/740
General Engineering
Gene
ral E
ngin
eerin
g
21
General Engineering ApplicationsAl-Pvc Tubes for water pipelineCondenser casesFilter GridHoneycomb panelsInsulation panelsLight BulbProfiles for double glazingRollbondRoller shutters-ceilings-panelsRoofing
Fins for spiral tubesSecurity Floating RoofRaised FloorRoof ridge stripSubstrate for el.circuit board drillingTransformer (strip with round-edge)Venetian BlindsElectric cables windingCladding on stellLight Parabolas
1050 1060 1200 1230 3003 3005 3004 3105 5005
5052 8009 8011 8079
from 0,03 to 5,0 mm
Mill finish on request bright roughness Ra<1,10 microns
Chemical degreasing and / or conversion treatment.
According to EN standard or better
from 20 to 1250 mm
70/75/150/200/300/500/600 mm
from 590 to 1180 mm
from 400 to 5000 mm
from 400 to 1250 mm
Main Alloys
Thicknesses
Surface finishing
Surface treatment
Thickness Tolerance
Strip Width range
Inside Diameter
Outside Diameter
Sheet Lenght range
Widht range
Quality & TechnologyOur company’s main aim is to satisfy the customer.
The latest equipment, experienced staff, flexibility and
Total Quality Management are the main features of
our development and success which have enabled our
company to become a globally-renowned manufactu-
rer of aluminium rolled products.
The ultimate success of this important project depends
on continuous delivery of the Quality Sistem which
affects all areas of the Company.
Our personnel undergo a full and continual program-
me of training in order to improve their professional
knowleledge and skills.
Qual
ity &
Tec
hnol
ogy
23
Our Quality and Environmental system for-
mally certified according to ISO 9001:2000,
and ISO 14001:2004.
Total Quality Management, based on the
philosophy of continuous improvement, have
been chosen as Company Policy.
The research and development programme,
which is being carried out together with
our Customers, supported by various University and Research Center
Professionals, have high expectations in the field of new materials,
processes, applications and environment protection.
The ability in getting steady increase in the range of products and ser-
vices by following, and even at times anticipating market trends, is one
of the chief factors behind our company’s successful story.
SS87 Km21,200 S.Marco Evangelista - 81020 Caserta - Italyph. +39 0823 222111fax +39 0823 451722www.laminazionesottile.com