Raccordi di passaggioFittings adaptor seriesRaccords serie de passageÜbergangsfittings
ISO-BSP
www.fipnet.pl tel.: 22 32 979 15
38
PVC-U ISO-BSP
I dati del presente prospetto sono forniti in buona fede. La FIP non si assume alcu-na responsabilità su quei dati non diret-tamente derivati da norme internazionali. La FIP si riserva di apportarvi qualsiasi modifica.
The data given in this leaflet are offered in good faith. No liability can be accepted concerning technical data that are not directly covered by recognized interna-tional standards. FIP reserves the right to carry out any modification to the products shown in this Ieaflet.
Les données contenues dans cette brochure sont fournies en bonne foi. FIP n’assume aucune responsabilité pour les données qui ne dérivent pas directement des normes internationa-les. FIP garde le droit d’apporter toute modification aux produits présentés dans cette brochure.
Alle Daten dieser Druckschrift wurden nach bestem Wissen angegeben, jedoch besteht keine Verbindlichkeit, sofern sie nicht direkt internationalen Normen entnommen wurden. Die Än-derung von Maßen oder Ausführungen bleibt FIP vorbehalten.
www.fipnet.pl tel.: 22 32 979 15
39
PVC-U ISO-BSP
•Gamma dimensionale da d 16 mm a d 125 mm e da R 3/8” a
R 4”
•Resistenza a pressioni di esercizio fino a 16 bar a 20° C (acqua)
•Temperatura massima di esercizio: 60° C
•Materiale: Cloruro di polivi nile rigido PVC-U
•Colore: grigio RAL 7011
•Sistema di giunzione mediante sal-datura chimica a freddo (incollag-gio) attraverso l’utilizzo di idoneo collante/adesivo, o filettatura
•Guarnizioni in EPDM o FPM
•Size range: from d 16 mm up to d 125 mm, from R 3/8” to
R 4”
•Pressure rating: max working pres-sure 16 bar at 20° C (water)
•Maximum working temperature: 60° C
•Material: Unplasticized poly vinyl chloride PVC-U
•Colour: grey RAL 7011
•Jointing technique: Cold (chemical) welding using solvent cement or threaded connection
•Sealing gaskets: EPDM or FPM
•Gamme dimensionnelle de d 16 mm au d 125 mm, de
R 3/8” a R 4”
•Résistance aux pressions de servi-ce jusqu’à 16 bar à 20° C (eau)
•Température maximale de service: 60° C
•Matériel: Polychlorure de vinyle non plastifié PVC-U
•Coleur: gris RAL 7011
•Système de jonction avec soudure chimique à froid (encollage) en utilisant un polymère de soudure (adhésif) préconisé, ou filetage
•Joints en EPDM ou FPM
•Abmessungen von d 16 mm bis d 125 mm, von R 3/8” bis
R 4”
•Druckstufe bis PN 16 bar bei 20° C (Wasser)
•Maximale Betriebstemperatur: 60° C
•Material: Polyvinylchlorid, hart ohne Weichmacher PVC-U
•Farbe: grau RAL 7011
•Verbindungstechnik: Kleben, Kaltschweissung mit Klebstoff oder Gewinde
•Dichtungen aus EPDM - FPM
Raccordi di passaggio
Fittingsadaptor series
ÜbergangsfittingsRaccords seriede passage
Legenda
d diametro nominale esterno del tubo in mm
DN diametro nominale interno in mm
R dimensione nominale della Filettatura in pol-lici
PN pressione nominale in bar (pressione max di esercizio a 20° C - acqua)
g Peso in grammi
K chiave
b bulloni
C codice di riferimento o-ring
PVC-U polivinile di cloruro rigido. MRS-25
FPM (FKM) fluoroelastomero
EPDM elastomero etilene propilene
d nominal outside diame-ter of the pipe in mm
DN nominal internal diameter in mm
R nominal sizes of the thread in inches
PN nominal pressure in bar (max working pressure at 20° C – water)
g weight in grams
K key
b bolts
C o-ring code
PVC-U un-plasticized poly vinyl chloride. MRS-25
FPM (FKM) vinylidene fluoride rubber
EPDM ethylene propylene rubber
d diamètre extérieur nominal du tube en mm
DN diamètre intérieur nominal en mm
R dimension nominale du filetage en pouces
PN pression nominale en bar (pression maximale de service 20° C – eau)
g Poids en grammes
K clef
b boulons
C référence O-rin
PVC-U polychlorure de vinyle non plastifié. MRS-25
FPM (FKM) fluoro-élastomère
EPDM élastomère éthylène propylène
d Aussendurchmesser des Rohres, in mm
DN Innendurchmesser (NW), in mm
R Abmessung des Gewindes in Zoll
PN Nenndruck; höchstzulässiger Betriebsdruck in bar, bei 20° C Wasser
g Gewicht in Gramm
K Schlüsselweite
b Schrauben
C O-Ring Code
PVC-U Polyvinylchlorid, hart ohne Weichmacher. MRS-25
FPM (FKM) Fluorelastomer
EPDM Ethylen-Propylen-Dien Elastomer
www.fipnet.pl tel.: 22 32 979 15
40
PVC-U ISO-BSP
GIFV
GIMV
GOMITO A 90°estremità d a bicchiere per incollag-gio, estremità R femmina filettata
GOMITO A 90° CON RINFORZOestremità d a bicchiere per incollag-gio, estremità R femmina filettata munita di anello in acciaio inox
FAUCET ELBOW 90°one socket plain for solvent wel-ding, the other with parallel threads
FAUCET ELBOW 90° REINFORCEDone socket plain for solvent welding, the other parallel threaded, with rein-forcing stainless steel ring
COUDE 90° DE PASSAGEfemelle à coller, et pas du gaz cylin-drique taraudée
COUDE 90° DE PASSAGEfemelle à coller et taraudée pas du gaz cylindrique, renforcée au tarau-dage en acier inox
WINKEL 90°mit Klebemuffe und Gewinde-muffe, Anschluß nur für Kunststoffgewinde21.010.32
WINKEL 90°versärkt mit Edelstahlring,Gewinde-muffe/Klebemuffe21.010.02
g
16244072
125175320465795
1130
g
20304885
130185345
L1
11,415
16,319,121,421,425,730,233,339,3
L1
11,415
16,319,121,421,425,7
Z
10121418
22,52733
40,54860
Z
10121418
22,52733
Z1
131317
20,527374655
65,580
Z1
131317
20,5273746
E
23,528,5
354354617691
108131
E
23,528,5
3543546176
E1
24,529,5
3644556277
L
14161922263138445161
L
14161922263138
PN
16161616161616161616
PN
16161616161616
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/2”
63 x 2”75 x 21/2”
90 x 3”110 x 4”
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/2”
63 x 2”
Dimensioni Dimensions Dimensions DimensionenLa FIP ha approntato una gamma di raccordi i cui attacchi sono in accordo con le seguenti norme:Incollaggio: ISO 727, ISO 15493, DIN 8063, NF EN 1452, KIWA, BRL-K504, UNI-EN 1452 accoppiabili con tubi secondo ISO 161/1, UNI-EN 1452, ISO 15493, DIN 8062, NF EN 1452, KIWA BRL-502. Filettatura: UNI ISO 228/1, DIN 2999, BS 21.
FIP have produced a complete range of fittings whose couplings comply with the following stan-dards:Solvent welding: ISO 727, ISO 15493, DIN 8063, NF EN 1452, KIWA, BRL-K504, UNI-EN 1452 coupling to pipes complying withISO 161/1, UNI-EN 1452, ISO 15493, DIN 8062, NF EN 1452, KIWA BRL-502.Threaded couplings: UNI ISO 228/1, DIN 2999, BS 21.
FIP a crée une gamme complè-te de raccords dont les raccords con-formes aux normes suivantes:Collage: ISO 727, ISO 15493, DIN 8063, NF EN 1452, KIWA, BRL-K504, UNI-EN 1452 assemblés à des tubes selon ISO 161/1, UNI-EN 1452, ISO 15493, DIN 8062, NF EN 1452, KIWA BRL-502. Filetage: UNI ISO 228/1, DIN 2999, BS 21.
FIP-Fittings aus PVC-hart ent-sprechen in ihren Anschlüssen folgenden Normen:Klebefittings: ISO 727, ISO 15493, DIN 8063, NF EN 1452, KIWA, BRL-K504, UNI-EN 1452 und können ver-bunden werden mit Rohren nach ISO 1616/1, UNI-EN 1452, ISO 15493, DIN 8062, NF EN 1452, KIWA BRL-502.Gewindefittings: UNI ISO 228/1, DIN 2999, BS 21.
www.fipnet.pl tel.: 22 32 979 15
41
PVC-U ISO-BSP
TIFV
TIMV
TI A 90°estremità d a bicchiere per incollag-gio, estremità R femmina filettata
TI A 90° CON RINFORZOestremità d a bicchiere per incollag-gio, derivazione R femmina munita di anello di rinforzo in acciaio inox
FAUCET TEE 90°with two plain sockets for solvent welding, and the third one with parallel threads
FAUCET TEE 90° REINFORCEDwith two sockets for solvent wel-ding, and the third one parallel threaded, with reinforcing stainless steel ring
TE 90° DE PASSAGEfemelles à coller avec dérivation taraudée pas du gaz cylindrique
TE 90° DE PASSAGEfemelles à coller avec dèrivation taraudée pas du gaz cylindrique renforcée au taraudage en acier inox
T-STÜCK 90°Durchgangsrichtung m. Klebemuffen, Abgang mit Gewindemuffe, Anschluß nur für Kunststoffgewinde21.020.32
T-STÜCK 90°versärkt mit Edelstahlring,Gewinde-muffe/Klebemuffe Durchgangsrichtung m. Klebemuffen, Abgang m. Gewindemuffe21.020.02
g
2032529271
110160195305405605
10701690
g
243860
105125210415
L1
11,415
16,315
19,121,4
1521,4
1525,730,233,339,3
L1
11,415
16,319,121,421,425,7
Z
91215
17,518
21,52727
33,533,5
4148,561,5
Z
9121518
21,527
33,5
Z1
111317182127
27,537
37,546
54,56683
Z1
11131721273746
E
23,528,5
354143506161767691
109133
E
23,528,5
3543506176
E1
24,5293644516277
L
14161922222631313838445161
L
14161922263138
PN
16161616161616161616161616
PN
16161616161616
d x R
16 x 3/8”20 x 1/2”25 x 3/4”32 x 1/2”
32 x 1”40 x 11/4”
50 x 1/2”50 x 11/2”
63 x 1/2”63 x 2”
75 x 21/2”90 x 3”
110 x 4”
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/2”
63 x 2”
www.fipnet.pl tel.: 22 32 979 15
42
PVC-U ISO-BSP
MIFV
MIMV
MANICOTTOestremità d a bicchiere per incollag-gio, estremità R femmina filettata
MANICOTTOestremità d a bicchiere per incollag-gio, estremità d femmina filettata con anello di rinforzo in acciaio inox
DOUBLE SOCKETone socket for solvent welding, the other one parallel threaded
DOUBLE SOCKET REINFORCEDone socket for solvent welding, the other one parallel threaded, with rein-forcing stainless steel ring
MANCHON DE PASSAGEfemelle à coller et taraudée pasdu gaz cylindrique
MANCHON DE PASSAGEfemelle à coller et taraudée pas du gaz cylindrique, reinforcée au tarau-dage en acier inox
MUFFEmit Klebemuffe u. Gewindemuffe, Anschluß nur für Kunststoffgewinde21.091.32
ÜBERGANGSMUFFEversärkt mit Edelstahlring, Gewindemuffe/Klebemuffe21.091.02
g
1220304856
102181
g
1423345362
110190
L1
11,415
16,319,121,421,425,7
L1
11,415
16,319,121,421,425,7
Z
5,545658
7,5
Z
5,545658
7,5
E
23,528,5
3543506176
E
23,528,5
3543506176
K
24293543506176
K
24293543506176
E1
24,529,5
3644516277
L
14161922263138
L
14161922263138
PN
16161616161616
PN
16161616161616
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/2”
63 x 2”
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/2”
63 x 2”
www.fipnet.pl tel.: 22 32 979 15
43
PVC-U ISO-BSP
DIFVADATTATORE Dl PASSAGGIOestremità df a bicchiere per incol-laggio, dm maschio per incollaggio, estremità R filettata femmina
DOUBLE ADAPTOR SOCKET FEMALE/MALE (DOUBLE VALVE SOCKET) one end female parallel threaded and the other male or female for solvent welding
EMBOUT DE PASSAGEfemelle taraudée pas du gaz cylin-drique mâle à coller et femelle réduit à coller
ÜBERGANGS-MUFFENNIPPELmit Klebemuffe/Klebestutzen und zyl. Gewindemuffe Anschluß nur für Kunststoffgewinde21.091.17
g
111817282649497466
127129190180280300470450670550
Lf
14141616191922222626313138384444515161
L1
11,41515
16,316,319,119,121,421,421,421,425,725,730,230,233,333,339,339,3
E
28-
34-
40-
52-
59-
70--------
K
243029363546445454656480769595
110110130131
Fig
ABABABABABABBBBBBBB
PN
16161616161616161616161616161616161616
Lm
16161919222226263131383844445151616169
H
363942454951576267727786769984
114100134111
dm x df x R
20 x 16 x 3/8”20 x 16 x 1/2”25 x 20 x 1/2”25 x 20 x 3/4”32 x 25 x 3/4”
32 x 25 x 1”40 x 32 x 1”
40 x 32 x 11/4”50 x 40 x 11/4”50 x 40 x 11/2”63 x 50 x 11/2”
63 x 50 x 2”75 x 63 x 2”
75 x 63 x 21/2”90 x 75 x 21/2”
90 x 75 x 3”110 x 90 x 3”110 x 90 x 4”
125 x 110 x 4”
Fig. A
Fig. B
DIMVADATTATORE Dl PASSAGGIOestremità df a bicchiere per incol-laggio, dm maschio per incollaggio, estremità R filettata femmina con anello di rinforzo in acciaio inox
DOUBLE ADAPTOR SOCKET FEMALE/MALE (DOUBLE VALVE SOCKET) one end female parallel tnreaded with reinforcing stainless steel ring and the other male or female for solvent welding
EMBOUT DE PASSAGEfemelle taraudée pas du gaz cylin-drique renforcé au tatìraudage en acier inox mâle à coller et femelle réduit à coller
ÜBERGANGS-MUFFENNIPPELverstänkt Edelstahlring mitKlebemuffe/Klebestutzen und zyl.Gewindemuffe Anschluß nur für Kunststoffgewinde21.091.17
g
132120343258588577
141143212202
Lf
14141616191922222626313138
L1
11,41515
16,316,319,119,121,421,421,421,425,725,7
E
28-
34-
40-
52-
59-
70--
E1
24,529,529,5
36364444555562627777
K
24302936354644545465648076
Fig
ABABABABABABB
PN
16161616161616161616161616
Lm
16161919222226263131383844
H
37404346505258636873788777
dm x df x R
20 x 16 x 3/8”20 x 16 x 1/2”25 x 20 x 1/2”25 x 20 x 3/4”32 x 25 x 3/4”
32 x 25 x 1”40 x 32 x 1”
40 x 32 x 11/4”50 x 40 x 11/4”50 x 40 x 11/2”63 x 50 x 11/2”
63 x 50 x 2”75 x 63 x 2”
Fig. A
Fig. B
www.fipnet.pl tel.: 22 32 979 15
44
PVC-U ISO-BSP
KIFVADATTATORE Dl PASSAGGIOestremità df a bicchiere per incol-laggio, dm maschio per incollaggio, estremità R maschio filettata
DOUBLE ADAPTOR SOCKET FEMALE/MALE (DOUBLE VALVE SOCKET)one end male parallel threaded and the other male or female for solvent welding
EMBOUT DE PASSAGEmâle fileté pas du gaz cylindrique, mâle à coller et femelle réduit à coller
ÜBERGANGS-MUFFENNIPPELmit Klebemuffe/Klebestutzen und zyl. Gewindestutzen Anschluß nur für Kunststoffgewinde21.091.17
g
46
10121715212728344050607095
105150125145155275280300370390420450500
Lf
12,5141416161919192222222626263131313838384444445151516161
L1
11,411,4
1515
16,315
16,319,1
1519,121,419,121,421,421,421,425,721,425,730,225,730,233,530,233,539,233,539,2
Z
2120
23,525
25,525,5
2729,527,530,532,531,5
35353735
39,53841
46,54954565762775965
K
1822222828343434424242525252656565757575959595
110110128128128
Lm
14161619192222222626263131313838384444445151516161616969
PN
16161616161616161616161616161616161616161616161616161616
dm x df x R
16 x 12 x 3/8”20 x 16 x 3/8”20 x 16 x 1/2”25 x 20 x 1/2”25 x 20 x 3/4”32 x 25 x 1/2”32 x 25 x 3/4”
32 x 25 x 1”40 x 32 x 3/4”
40 x 32 x 1”40 x 32 x 11/4”
50 x 40 x 1”50 x 40 x 11/4”50 x 40 x 11/2”63 x 50 x 11/4”63 x 50 x 11/2”
63 x 50 x 2”75 x 63 x 11/2”
75 x 63 x 2”75 x 63 x 21/2”
90 x 75 x 2”90 x 75 x 21/2”
90 x 75 x 3”110 x 90 x 21/2”
110 x 90 x 3”110 x 90 x 4”
125 x 110 x 3”125 x 110 x 4”
NRIVNIPPLO Dl PASSAGGIO RIDOTTOestremità d ridotta maschio per incollaggio, estremità R maschio filettata
BARREL NIPPLE REDUCINGone end plain for solvent welding, the other one parallel threaded.
MAMELON DE PASSAGE RÉDUITfileté pas du gaz cylindrique, mâle à coller réduit
REDUZIER-NIPPELmit Klebestutzen/zyl. Gewinde-stutzen, Anschluß nur für Kunststoffgewinde21.091.09
g
4370
L1
2628
H
6066
E
5363
K
4655
PN
1616
d x R
25 x 1”32 x 11/4”
www.fipnet.pl tel.: 22 32 979 15
45
PVC-U ISO-BSP
BIFVBOCCHETTONEestremità d a bicchiere per incollag-gio, estremità R femmina filettata, guarnizione O-Ring in EPDM
SOCKET UNIONone end plain for solvent welding, the other one parallel threaded, with EPDM gasket
UNION DE PASSAGE 3 PIÈCESfemelles à coller taraudées pas du gaz cylindrique, avec joint EPDM
ÜBERGANGSVERSCHRAUBUNGEinlegeteil:KlebemuffeEinschraubteil:Gewindemuffe, Anschlußnur für Kunststoffgewinde, mit EPDM Dischtung21.051.02
L
14161922263138445161
R1
3/4”1”
11/4”11/2”
2”21/4”23/4”31/2”
4”5”
g
22356285
145180315630810
1350
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/2”
63 x 2”75 x 21/2”
90 x 3”110 x 4”
PN
16161616161616101010
L1
11,415
16,319,121,421,425,730,233,339,3
H
41455157677288
116125145
Z
15,614
15,715,919,619,6
2434,840,744,7
E
33415058727998
120135163
C
3062408141124131616261876237630063626450
T
2,623,533,533,535,345,345,345,345,345,34
di
15,5420,2228,1732,9340,65
4759,6975,5791,45
113,67
O-Ring
BIRVBOCCHETTONEcon elemento fisso filettato maschiocon guarnizione O-Ring in EPDM
SOCKET UNIONunion bush threaded spigot with EPDM O-Ring
UNION DE PASSAGEMâle fileté femelle à colleravec Joint en EPDM
ÜBERGANGSVERSCHRAUBUNGEinschraubteilRohr-Aussengewinde mit EPDM Dichtung
g
200220380
H
98102116
L
313138
L1
21,425,725,7
Z
45,645,352,3
K
535367
E
797998
PN
161616
R1
21/4”21/4”23/4”
d x R
50 x 11/2”50 x 2”63 x 2”
BIFVOBOCCHETTONE Dl PASSAGGIO Ottone/PVC-U ghiera ed elemento fisso filettato femmina in ottonecon guarnizione piana in EPDM
SOCKET UNION Brass/PVC-U nut and union bush: brass, threaded socket with EPDM flat gasket
UNION MIXTE 3 PIÈCES Laiton/PVC-U femelle laiton taraudée femelle PVC-U à coller avec joint plat en EPDM
ÜBERGANGSVERSCHRAUBUNGMessing/PVC-U Einschraubteil: Messing, Rohr-lnnengewinde mit EPDM Flachdichtung
g
90145240275465515805
L
14161922263138
H
39465257647080
Z
3333333
K
27263238475367
K1
30374754667287
PN
16161616161616
R1
3/4”1”
11/4”11/2”
2”21/4”23/4”
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/4”
63 x 2”
www.fipnet.pl tel.: 22 32 979 15
46
PVC-U ISO-BSP
LIVATTACCO PER SERBATOIestremità d maschio per incollaggio, connessioni filettate R munite di dado di serraggio e guarnizione piana in EPDM
TANK CONNECTORthreaded with nut, with plain male connection for solvent welding and EPDM flat gasket
TRAVERSÉE DE PAROISpar embout mâle fileté avec ècrou et joint, raccordement mâle à coller et joint plâte en EPDM
BEHÄLTER-ANSCHLUSSmit Klebestutzen/zyl.Gewindestutzen und Flachdichtung aus EPDM21.092.02
g
5890
L1
1922
L2
1618
H
6066
P
22
K
4655
K1
4650
L
2628
PN
1616
A
5862
d x R
25 x 1”32 x 11/4”
LIFVATTACCO PER SERBATOIestremità d femmina per incollag-gio, connessioni filettate maschio R e femmina R1 con dado di serraggio e guarnizione piana in EPDM o FPM
TANK CONNECTORone female end d for solvent wel-ding, threaded connection R male and R1 female with tightening nut and EPDM or FPM flat gasket
TRAVERSÉE DE PAROISembout femelle à coller d, raccor-ment fileté mâle R et femelle R1 avec écrou de serrage et joint plâte en EPDM ou FPM
BEHÄLTER-ANSCHLUSSKlebemuffe d, Gewindstutzen R und Gewindemuffe R1 mit Kontermutter und Flachdichtung aus EPDM oder FPM
g
53108142192337
A
4458627692
K
3346506079
L
4749525460
L1
1516,319,119,121,4
L2
1416192226
H
60,565707381
P
33333
L3
13,5161819
20,8
PN
1616161616
d x R x R1
16 x 3/4” x 1/2”20 x 1” x 3/4”25x 11/4” x 1”
32 x 11/2” x 1”40 x 2” x 11/2”
BIRVOBOCCHETTONE Dl PASSAGGIO Ottone/PVC-U ghiera ed elemento fisso filettato maschio in ottone con guarnizione piana in EPDM
SOCKET UNION Brass/PVC-U nut and union bush: brass, threa-ded spigot with EPDM flat gasket
UNION MIXTE 3 PIÈCES Laiton/PVC-Umâle laiton fileté femelle PVC-U à coller avec joint plat en EPDM
ÜBERGANGSVERSCHRAUBUNGMessing/PVC-UEinschraubteil:Messing,Rohr-Aussengewinde mit EPDM Flachdichtung
g
110160300360570705
1050
L
14161922263138
H
505975818699
113
Z
3333333
K
27263238475367
K1
30374754667287
PN
16161616161616
R1
3/4”1”
11/4”11/2”
2”21/4”23/4”
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 11/4”50 x 11/2”
63 x 2”
www.fipnet.pl tel.: 22 32 979 15
47
PVC-U ISO-BSP
JFVDADOcon filettatura cilindrica (utilizzato su LIV e LIFV)
BACK NUTwith parallel threads for LIV and LIFV
ÉCROU HEXAGONALpas du gaz cylindrique pour LIV et LIFV
KONTERMUTTERfür Behälteranschlüsse LIV und LIFV. Anschluß nur fürKunststoffgewinde 21.092.00
g
111431325284
H
1313,5
16181921
K
283346506079
A
384458627692
PN
161616161616
R
1/2” 3/4”
1”11/4”11/2”
2”
www.fipnet.pl tel.: 22 32 979 15
Code
GIFV pag. 40
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”75 x 2 1/2”
90 x 3”110 x 4”
Cod.
GIFV016038GIFV020012GIFV025034GIFV032100GIFV040114GIFV050112GIFV063200GIFV075212GIFV090300GIFV110400
DIFV pag. 43
dm x df x R
20 x 16 x 3/8”20 x 16 x 1/2”25 x 20 x 1/2”25 x 20 x 3/4”32 x 25 x 3/4”
32 x 25 x 1”40 x 32 x 1”
40 x 32 x 1 1/4”50 x 40 x 1 1/4”50 x 40 x 1 1/2”63 x 50 x 1 1/2”
63 x 50 x 2”75 x 63 x 2”
75 x 63 x 2 1/2”90 x 75 x 2 1/2”
90 x 75 x 3”110 x 90 x 3”110 x 90 x 4”
125 x 110 x 4”
Cod.
DIFV020016038DIFV020016012DIFV025020012DIFV025020034DIFV032025034DIFV032025100DIFV040032100DIFV040032114DIFV050040114DIFV050040112DIFV063050112DIFV063050200DIFV075063200DIFV075063212DIFV090075212DIFV090075300DIFV110090300DIFV110090400DIFV125110400
DIMV pag. 43
dm x df x R
20 x 16 x 3/8”20 x 16 x 1/2”25 x 20 x 1/2”25 x 20 x 3/4”32 x 25 x 3/4”
32 x 25 x 1”40 x 32 x 1”
40 x 32 x 1 1/4”50 x 40 x 1 1/4”50 x 40 x 1 1/2”63 x 50 x 1 1/2”
63 x 50 x 2”75 x 63 x 2”
Cod.
DIMV020016038DIMV020016012DIMV025020012DIMV025020034DIMV032025034DIMV032025100DIMV040032100DIMV040032114DIMV050040114DIMV050040112DIMV063050112DIMV063050200DIMV075063200
BIFV pag. 45
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”75 x 2 1/2”
90 x 3”110 x 4”
EPDM
BIFV016038EBIFV020012EBIFV025034EBIFV032100EBIFV040114EBIFV050112EBIFV063200EBIFV075212EBIFV090300EBIFV110400E
BIFVO pag. 45
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”
EPDM
BIFVO016038EBIFVO020012EBIFVO025034EBIFVO032100EBIFVO040114EBIFVO050112EBIFVO063200E
BIRV pag. 45
d x R
50 x 1 1/2”50 x 2”63 x 2”
EPDM
BIRV050112EBIRV050200EBIRV063200E
BIRVO pag. 46
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”
EPDM
BIRVO016038EBIRVO020012EBIRVO025034EBIRVO032100EBIRVO040114EBIRVO050112EBIRVO063200E
www.fipnet.pl tel.: 22 32 979 15
Code
GIMV pag. 40
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”
Cod.
GIMV016038GIMV020012GIMV025034GIMV032100GIMV040114GIMV050112GIMV063200
JFV pag. 47
R
1/2”3/4”
1”1 1/4”1 1/2”
2”
Cod.
JFV012JFV034JFV100JFV114JFV112JFV200
KIFV pag. 44
dm x df x R
16 x 12 x 3/8”20 x 16 x 3/8”20 x 16 x 1/2”25 x 20 x 1/2”25 x 20 x 3/4”32 x 25 x 1/2”32 x 25 x 3/4”
32 x 25 x 1”40 x 32 x 3/4”
40 x 32 x 1”40 x 32 x 1 1/4”
50 x 40 x 1”50 x 40 x 1 1/4”50 x 40 x 1 1/2”63 x 50 x 1 1/4”63 x 50 x 1 1/2”
63 x 50 x 2”75 x 63 x 1 1/2”
75 x 63 x 2”75 x 63 x 2 1/2”
90 x 75 x 2”90 x 75 x 2 1/2”
90 x 75 x 3”110 x 90 x 2 1/2”
110 x 90 x 3”110 x 90 x 4”
125 x 110 x 3”125 x 110 x 4”
Cod.
KIFV016012038KIFV020016038KIFV020016012KIFV025020012KIFV025020034KIFV032025012KIFV032025034KIFV032025100KIFV040032034KIFV040032100KIFV040032114KIFV050040100KIFV050040114KIFV050040112KIFV063050114KIFV063050112KIFV063050200KIFV075063112KIFV075063200KIFV075063212KIFV090075200KIFV090075212KIFV090075300KIFV110090212KIFV110090300KIFV110090400KIFV125110300KIFV125110400
LIV pag. 46
d x R
25 x 1”32 x 1 1/4”
Cod.
LIV025100LIV032114
MIFV pag. 42
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”75 x 2 1/2”
90 x 3”110 x 4”
Cod.
MIFV016038MIFV020012MIFV025034MIFV032100MIFV040114MIFV050112MIFV063200
DIFV090075212DIFV110090300DIFV125110400
MIMV pag. 42
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”
Cod.
MIMV016038MIMV020012MIMV025034MIMV032100MIMV040114MIMV050112MIMV063200
LIFV pag. 46
d x R x R1
16 x 3/4” x 1/2”20 x 1” x 3/4”
25 x 1 1/4” x 1”32 x 1 1/2”x 1”40 x 2” x 1 1/2”
EPDM
LIFV016034012ELIFV020100034ELIFV025114100ELIFV032112100ELIFV040200112E
FPM
LIFV016034012FLIFV020100034FLIFV025114100FLIFV032112100FLIFV040200112F
NRIV pag. 44
d x R
25 x 1”32 x 1 1/4”
Cod.
NRIV025100NRIV032114
www.fipnet.pl tel.: 22 32 979 15
Code
TIMV pag. 41
d x R
16 x 3/8”20 x 1/2”25 x 3/4”
32 x 1”40 x 1 1/4”50 x 1 1/2”
63 x 2”
Cod.
TIMV016038TIMV020012TIMV025034TIMV032100TIMV040114TIMV050112TIMV063200
TIFV pag. 41
d x R
16 x 3/8”20 x 1/2”25 x 3/4”32 x 1/2”
32 x 1”40 x 1 1/4”
50 x 1/2”50 x 1 1/2”
63 x 1/2”63 x 2”
75 x 2 1/2”90 x 3”
110 x 4”
Cod.
TIFV016038TIFV020012TIFV025034TIFV032012TIFV032100TIFV040114TIFV050012TIFV050112TIFV063012TIFV063200TIFV075212TIFV090300TIFV110400
www.fipnet.pl tel.: 22 32 979 15
Top Related