ISTRUZIONI DI MONTAGGIOe-motivebgdataservices7x.org.uk/InventoryTeam/Umbra/Umbra Fitting... · ford...
Transcript of ISTRUZIONI DI MONTAGGIOe-motivebgdataservices7x.org.uk/InventoryTeam/Umbra/Umbra Fitting... · ford...
ISTRUZIONI DI MONTAGGIOFITTING INSTRUCTIONS
INSTRUCTIONS DE MONTAGEMONTAGEANLEITUNG
INSTRUCCIONES DE MONTAJE
DISPOSITIVO DI TRAINO TIPOTOWING BRACKET TYPEDISPOTIF DE REMORQUAGE TYPEANHAENGEVORRICHTUNG TYPDISPOSITIVO DE CAREO TIPO
14078/F
PER AUTOVEICOLIFOR CARSPOUR AUTOSFUR KRAFTAHRZEUGEPARA AUTOVEHICULO
FORD FOCUS C-MAX, C-MAX e GRAND C-MAX,
FORD FOCUS 3-5 Porte Anche restyling 2011
TYPE DM2, DXA, DA3, DYB
C-MAX e GRAND C-MAX:2003 =>
3-5 Porte: 2005 =>
CLASSE E TIPO DI ATTACCOCLASS AND HITCH TYPECLASSE ET TYPE DE CROCHETKLASSE UND BEFESTIGUNGSARTCLASES DE ACOPLAMIENTO
OMOLOGAZIONEHOMOLOGATIONHOMOLOGATIONZULASSUNGAPROBACION
CARICO VERTICALE MAXS VALUEMASSE VERTICALE MAXIMUMZUL. STUETZLASTCARGA MAX. VERTICAL
F e3 00 – 7157(DIR. 94/20/CE)
S = kg 100
ALORE DD VALUEVALEUR DD WERTVALOR D
D = 9.3 kN
COPPIA DI SERRAGGIO PER VITI (8.8):TORQUE SETTINGS FOR NUTS AND BOLTS (8.8):
COUPLE DE SERRAGE POUR VIS (8.8):SCHRAUBENANZUGSMOMENT (8.8):
MOM. DE PRESION PARA TORNILLOS Y TUERCAS (8.8):
Cod. 14078/F- Ford Focus C-MAX-
v. 1.0 01/01/2011 P. 1 / 8
9,3 kN
M6 = 10 Nm M8 = 25 NmM10 = 55 Nm M12 = 85 NmM14 = 135 Nm M16 = 200 Nm
Tel. +39 075.5280260Fax +39 075.5287033Via Pizzoni 37/3906132 PerugiaITALY
SAFETY INSTRUCTIONS
Make sure that the towbar is suitable for the vehicle before starting the installation
For safety, all work involving towbar installation (incl. electrical components) must be undertaken by skilled technicians.
Damaged components must be replaced with manufacturer’s spares and fitted by qualified staff
It is forbidden to make any modification or structural repair to towing assembly
The towball must be kept clean and lubricated. For added safety, his diameter (50 mm) must be checked at regular intervals. If the towball measures less than 49 mm after selected readings across the diameter, the towball must be replaced with a new one
After 1000 km of towing, check torque settings for nuts and bolts, in accordance with the table
Umbra Rimorchi cannot be held responsible for any defects in the product caused by fault or by any injudicious use whatever of the user or a person he is liable for.
Cod. 14078/F- Ford Focus C-MAX-
v. 1.0 01/01/2011 P. 2 / 8
FITTING INSTRUCTIONS14078/F FORD FOCUS C-MAX
• Remove any mastic from contact points and paint with anti rust paint.
• Just for Focus 3 2011> Hatchback: remove the lights and the casing under the flatcar
• Remove the bumper and discard the bumper beam.• Insert side arms A inside the chassis rails and fit referring to screws 1.• Just for C-Max '10 and Grand C-Max '10: if present remove the antenna of the
parking sensors which is on the central wall of the body shell and locate it behind the same support drilling out two new holes dimensions 06.
• Locate cross bar B referring to holes 2 and 3 and tighten.• Caution: Just for Focus '11 2 volumes, locate item B on the rearward holes as
showed.• Tighten all bolts and nuts as per torque settings• Connect the wirings to the socket• Just Focus C-Max '03-'10 and Focus 2 3&5 doors: cut the bumper as showed (little
cut) • Just for Focus 3 2011> Hatchback: cut bumper and casing as showed in
attachment 1.• Connect the socket support to its support based on the type of vehicle in which
the tow bar is mounted (see sketch)• Re-fit bumper.• Just for 3 2011> Hatchback volumes: re-fit the casing and the lights.
DISAPPEARING ELECTRICAL SOCKET
Cod. 14078/F- Ford Focus C-MAX-
v. 1.0 01/01/2011 P. 3 / 8