Energiemanagementsysteme ISO 50001:2018 …Certificati ISO 50001 (in Italia –Giugno 2019) TÜV...

27
Energiemanagementsysteme TÜV ITALIA Roberto Bandini 20/06/2019 by Roberto Bandini [email protected] ISO 50001:2018 Adottare un Sistema di Gestione dell’Energia secondo la ISO 50001:2018

Transcript of Energiemanagementsysteme ISO 50001:2018 …Certificati ISO 50001 (in Italia –Giugno 2019) TÜV...

Energiemanagementsysteme

TÜV ITALIA Roberto Bandini

20/06/2019by Roberto Bandini

[email protected]

ISO 50001:2018Adottare un Sistema di Gestione dell’Energia

secondo la ISO 50001:2018

D.Lgs. 102/2014 e relazione con il SGE ISO 50001

D.Lgs. 102/2014: obbligo di eseguire l’Audit Energetico su tutti i siti sul territorio nazionale ogni 4

anni entro il 5 Dicembre prossima scadenza nel Dicembre 2019

L’obbligo non si applica alle imprese che hanno adottato sistemi di gestione conformi alle norme

ISO 50001 oppure EMAS e ISO 14001 a condizione che questi ultimi includano un audit energetico,

redatto sempre secondo i requisiti stabiliti dall’Allegato 2 del decreto. Resta fermo l’obbligo di

trasmettere il rapporto della diagnosi condotta nell’ambito del sistema di gestione

Come si relaziona un SGE ISO 50001 con l’adempimento all’obbligo introdotto dal

D.Lgs.102/2014?

Non è corretto dire che le società con un SGE ISO 50001 “non sono soggette all’obbligo di

diagnosi energetica”, bensì sarebbe più corretto dire che le società con un SGE “non sono

soggette all’obbligo di diagnosi energetica addizionale” poiché la diagnosi energetica

già prevista dal SGE, se rispondente ai requisiti del D.Lgs. 102/2014, è sufficiente.

Praticamente per queste società l’audit energetico è una scelta consapevole implementata

nei sistemi di gestione aziendale.

TÜV ITALIA Roberto Bandini

Certificati ISO 50001 (in Italia – Giugno 2019)

TÜV ITALIA Roberto Bandini

Sistemi di gestione dell’Energia

Norma di accreditamento: UNI CEI EN ISO/IEC 17021-1 – ISO/IEC 50003:2014

Norma di certificazione: UNI CEI EN ISO 50001:2011 – UNI CEI EN ISO 50001:2018

Siti certificati al Novembre 2018: 2735

Siti certificati al Giugno 2019: 3686

Fonte dati: Accredia

• Pubblicata il 20 Agosto 2018

• Recepita dall’UNI (UNI CEI EN ISO) e

pubblicata in lingua inglese

• Sostituisce la precedente norma ISO

50001:2011 a partire dal 20 Agosto 2018, ma

che continuerà a valere nel periodo di

transizione di 3 anni

Approccio “sistematico” al miglioramento

continuo della propria efficienza

energetica con esempi pratici

Per i criteri di prestazione energetica

rimanda alle ISO 50006 e ISO 50015

ISO 50001 – Introduzione alla norma

ISO 50001:2018 “Sistemi di gestione dell’energia – Requisiti e linee guida per l’uso”

TÜV ITALIA Roberto Bandini

Energiemanagementsysteme EnMS – ISO 50001:2018

Cambiamenti chiave nella ISO 50001:2018 rispetto all'edizione 2011

Le principali modifiche rispetto alla precedente edizione sono le seguenti:

Adozione del testo dell’Annex SL Annex 2, High Level Structure (HLS), per garantire un

elevato livello di compatibilità con altri standard del sistema di gestione;

Chiarimenti nel linguaggio, definizioni e concetto di organizzazione;

Le definizioni nella sezione 3 sono in ordine di contesto (es. Organizzazione, SGE,

Requisiti, Performance ed Energia);

Lo sviluppo dell’Analisi Energetica è stato chiarito;

Normalizzazione degli EnPI(s) e degli associati EnB(s);

Chiarimento sul piano di raccolta dei dati energetici e relativi requisiti (in precedenza

piano di misurazione dell'energia);

Il testo degli EnPI ed EnB è stato chiarito per fornire una migliore comprensione di questi

concetti.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Tabella di

corrispondenza

ISO 50001:2011

e

ISO 50001:2018:

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Tabella di

corrispondenza

ISO 50001:2011

e

ISO 50001:2018:

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

Esempi di contesto esterno: Esempi di contesto interno:

Questioni relative a parti interessate quali obiettivi, requisiti o

norme esistenti a livello nazionale o localeObiettivi e strategia del core business

Restrizioni o limitazioni sull'approvvigionamento energetico,

sicurezza e affidabilità

Piani di gestione patrimoniale - Risorse economiche (lavoro,

finanziarie, ecc.) che riguardano l'organizzazione

Costi energetici o disponibilità di tipi di energia Rischi operativi e considerazioni di responsabilità.

Effetti del tempo Maturità e cultura della gestione energetica

Effetti del cambiamento climatico Considerazioni sulla sostenibilità

Effetto sulle emissioni di gas a effetto serraPiani di emergenza per interruzioni nell'approvvigionamento

energetico

4 Context of the organization4.1 Understanding the organization and its context

The organization shall determine external and internal issues that are relevant to its purpose and that

affect its ability to achieve the intended outcome(s) of its EnMS and improve its energy performance.

Nel determinare il contesto organizzativo, l'organizzazione deve considerare le informazioni ottenute

dall‘analisi energetica (vedi sez. 6.3).

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

4. Context of the organization4.2 Understanding the needs and expectations of interested partiesThe organization shall determine:

a) the interested parties that are relevant to energy performance and the EnMS;

b) the relevant requirements of these interested parties;

c) which of the identified needs and expectations the organizations addresses through its EnMS.

d) the risks and opportunites for deviating from energy performance

The organization shall:

• ensure that it has access to the applicable legal requirements and other requirements related to its energy

efficiency, energy use and energy consumption;

• determine how these requirements apply to its energy efficiency, energy use and energy consumption;

• ensure that these requirements are taken into account;

• review at defined intervals its legal requirements and other requirements.

Clause 3.1.5 - Interested party (preferred term)/ Stakeholder (admitted term): person or organization that can affect,

be affected by, or perceive itself to be affected by a decision or activity related to the EnMS or energy performance

of the organization.

Esempi: clienti, autorità locali, vicini di casa, fornitori, ONG, stampa, investitori, dipendenti.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:4.3 Determining the scope of the energy management system

The organization shall determine the boundaries and applicability of the EnMS to establish its scope.

When determining the EnMS scope, the organization shall consider:

a) the external and internal issues referred to in 4.1;

b) the requirements referred to in 4.2.

The organization shall ensure that it has the authority to control its energy efficiency, energy use and

energy consumption within the scope and boundaries. The organization shall not exclude an energy type

within the scope and boundaries.

The EnMS scope and boundaries shall be maintained as documented information (see 7.5).

La nuova revisione richiede che l'organizzazione:

• nel definire l'ambito e i confini del sistema SGE, consideri il contesto dell'organizzazione e le

aspettative delle parti interessate,

• garantisca di avere autorità e controllo per gestire l'efficienza energetica, l'uso di energia e il consumo

di energia nell'ambito e nei confini del sistema SGE,

• non escluda alcun tipo di energia entro l'ambito e i confini del sistema SGE.

TÜV ITALIA Roberto BandiniTÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

TÜV ITALIA Roberto Bandini

Cambiamenti chiave in dettaglio:

5. Leadership

5.1 Leadership and commitment

….

5.2 Energy policy

….

5.3 Organization roles, responsibilities and authorities

….

La nuova revisione richiede che l'organizzazione:

• deve dimostrare leadership e impegno nel rispetto del miglioramento continuo delle sue

prestazioni energetiche e dell'efficacia del sistema SGE,

• deleghi le responsabilità e anche le autorità necessarie all’Energy Management Team nella guida

verso il miglioramento della prestazione energetica,

• renda disponibile come informazione documentata la Politica energetica.

Come per le altre norme HLS, la figura del Rappresentante della Direzione non viene citata.

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

6. PlanningCome nella norma precedente, l'organizzazione deve stabilire, condurre e documentare un processo

di pianificazione energetica.

6.1 Actions to address risks and opportunities

6.1.1 When planning for the EnMS, the organization shall consider the issues referred to in 4.1, requirements

referred to in 4.2, and outputs of energy review (see 6.3) and determine the risks and opportunities that need to be

addressed to:

- give assurance that the EnMS can achieve its intended outcome(s), including energy performance improvement;

- prevent, or reduce, undesired effects;

- achieve continual improvement in the EnMS and energy performance.

6.1.2 The organization shall plan:

a) actions to address these risks and opportunities;

b) how to:

1. integrate and implement the actions into its EnMS and energy performance processes;

2. evaluate the effectiveness of these actions.

La nuova revisione richiede che l'organizzazione:

• consideri l’analisi del contesto e delle parti interessate nel processo di pianificazione energetica

• determini i rischi e le opportunità e attui misure per assicurare che i risultati previsti per il SGE

siano raggiunti.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:6.2 Objectives, energy targets and planning to achieve them6.2.1 The organization shall establish objectives at relevant functions and levels. The organization shall establish energy targets.

Gli obiettivi possono includere miglioramenti generali al SGE e target di miglioramento delle prestazioni energetiche

specifici e misurabili. Mentre alcuni obiettivi possono essere quantificabili e avere target di miglioramento delle prestazioni

energetiche (es. riduzione dei consumi di energia elettrica del 3% entro la fine dell'anno, miglioramento dell'efficienza dell'impianto

del 2% entro il quarto trimestre), altri obiettivi possono essere qualitativi (ad esempio relativi al comportamento energetico,

cambiamento culturale). Spesso è possibile fornire alcuni valori quantitativi per obiettivi qualitativi, attraverso indagini o altri

meccanismi simili.

6.2.2 The objectives and energy targets shall:6.2.3 When planning how to achieve its objectives and energy targets, the

organization shall establish and maintain action plans that include:

a) Be consistent with the energy policy (see 5.2) - What will be done

b) Be measureable (if practicable) - What resources will be required

c) Take into account applicable requirements - Who will be responsible

d) Consider SEUs (see 6.3) - When its will be completed

e) Take into account opportunities (see 6.3) to improve

energy performance

- How the results will be evaluated, including the method for verification of energy

performance improvement.

f) Be monitored

g) Be communicated

h) Be updated as appropriate.

The organization shall consider how the actions to achieve its objectives and energy

targets can be integrated into the organization’s business processes.

The organization shall retain documented information

(see 7.5) on the objectives and energy targetsThe organization shall retain documented information on action plans (see 7.5).

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti

chiave in

dettaglio:

6.3 Energy Review

Nessuna modifica

nei requisiti della

sezione.

Solo modifiche

redazionali per la

chiarezza dei

requisiti standard.

6.3 Energy review

The organization shall develop and conduct an energy review.

To develop the energy review, the organization shall:

a) analyse energy use and consumption based on measurement and other data, i.e.:

1) identify current types of energy (see 3.5.1);

2) evaluate past and current energy use(s) and consumption;

b) based on the analysis, identify SEUs (see 3.5.6);

c) for each SEU:

1) determine relevant variables;

2) determine current energy performance;

3) identify the person(s) doing work under its control that influence or affect the

SEUs;

d) determine and prioritize opportunities for improving energy performance;

e) estimate future energy use(s) and energy consumption.

The energy review shall be updated at defined intervals, as well as in response to major

changes in facilities, equipment, systems or energy-using processes.

The organization shall maintain as documented information (see 7.5) the methods and

criteria used to develop the energy review, and shall retain documented information of its

results.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti

chiave in

dettaglio:

6.3 Energy

Review

Nello sviluppare ed implementare l’analisi energetica, un’organizzazione dovrebbe

considerare che:

- le persone che lavorano sotto il controllo dell'organizzazione possono essere i fornitori

di servizi, il personale part-time e il personale temporaneo,

- l'aggiornamento dell’analisi energetica include l'aggiornamento dei dati e delle

informazioni relative all'analisi dell'uso dell'energia e del consumo energetico, la

determinazione delle SEU e l'identificazione delle opportunità per migliorare le

prestazioni energetiche. Non tutte le parti dell’analisi energetica devono essere

aggiornate allo stesso tempo,

- quando si cercano opportunità di miglioramento delle prestazioni energetiche, le

organizzazioni dovrebbero considerare il modo/metodo in cui l'energia è richiesta per un

particolare processo o è recuperabile. Le opportunità possono emergere nel tempo a

causa di cambiamenti nei carichi e parametri operativi, degrado delle apparecchiature e

miglioramenti delle tecnologie e tecniche disponibili. Le opportunità possono anche

essere identificate nel modo in cui le attrezzature e i sistemi sono gestiti e

manutenuti,

- l'installazione di sistemi di energia rinnovabile nell'ambito e nei confini del SGE, non

rappresenta un miglioramento delle prestazioni energetiche. Il consumo di energia

nell’ambito del SGE può diminuire, tuttavia non vi sarà alcun miglioramento misurabile

dell'efficienza energetica o del consumo energetico correlato all'uso di energia a seguito

del cambiamento. In tali casi, un'organizzazione deve valutare separatamente la

produzione di energia rinnovabile.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:6.4 Energy performance indicator (EnPI)

The organization shall determine EnPIs that:

a) are appropriate for measuring and monitoring its energy performance;

b) enable the organization to demonstrate energy performance improvement.

The method for determining and updating the EnPIs shall be maintained as documented information

(see 7.5). Where the organization has data indicating that relevant variables significantly affect energy

performance, the organization shall consider such data to establish appropriate EnPI(s).

EnPI value(s) shall be reviewed and compared to their respective EnB(s), as appropriate. The

organization shall retain documented information (see 7.5) of EnPI value(s).

In sostanza, il punto della norma relativo agli indicatori di prestazione energetica non contiene

requisiti nuovi o modificati. Tuttavia, lo scopo degli EnPI è meglio evidenziato.

Le linee guida per misurare le prestazioni energetiche utilizzando i consumi di riferimento energetici

(EnB) e gli indicatori di prestazione energetica (EnPI) come da ISO 50006 e ISO 50015 sono state

incorporate nel testo ISO 50001; per esempio, la correlazione tra il valore di EnPI di riferimento e il

valore di EnPI risultante dopo l’implementazione del piano di azione energetico è riportata al punto

A.6.4.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:6.5 Energy baseline (EnB)

The organization shall establish (an) EnB(s) using the information from the energy review(s) (see 6.3), taking into

account a suitable period of time.

Where the organization has data indicating that relevant variables significantly affect energy performance, the

organization shall carry out normalization of the EnPI value(s) and corresponding EnB(s).NOTE: depending on the nature of the activities, normalization can be a simple adjustment, or a more complex procedure.

EnB(s) shall be revised in the case of one or more of the following:

a) EnPI(s) no longer reflect the organization’s energy performance;

b) there have been major changes to the static factors;

c) according to a pre-determined method.

The organization shall retain information of EnB(s), relevant variable data and modifications to EnB(s) as

documented information (see 7.5).

.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

6.6 Planning for collection of energy data

The organization shall ensure that key characteristics of its operations affecting energy performance are identified,

measured, monitored and analysed at planned intervals (see 9.1).

The organization shall define and implement an energy data collection plan appropriate to its size, its complexity, its

resources and its measurement and monitoring equipment. The plan shall specify the data necessary to monitor the

key characteristics and state how and at what frequency the data shall be collected and retained.

Data to be collected (or acquired by measurement as applicable) and retained documented information (see 7.5)

shall include the relevant variables for SEUs, energy consumption related to SEUs and to the organization,

operational criteria related to SEUs, static factors, if applicable and data specified in action plans.

The energy data collection plan shall be reviewed at defined intervals and updated as appropriate.

The organization shall ensure that the equipment used for measurement of key characteristics provides data which

are accurate and repeatable. The organization shall retain documented information (see 7.5) on measurement,

monitoring and other means of establishing accuracy and repeatability.

Fondamentalmente non ci sono nuovi requisiti.

I dati sono di fondamentale importanza nel monitoraggio e nel miglioramento continuo delle prestazioni

energetiche. Pianificare quali dati raccogliere, come raccoglierli e quanto spesso raccoglierli aiuta a garantire la

disponibilità dei dati necessari per manutenere l’analisi energetica e i processi di monitoraggio, misurazione,

analisi e valutazione. I dati possono provenire da semplice conteggi numerici fino a sistemi di monitoraggio e

misurazione completi collegati ad applicazioni software in grado di consolidare i dati e fornire analisi automatiche.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

7. Support7.4 Communication

The organizaiton shall determine the internal and external communications relevant to the EnMS,

including:

Fondamentalmente non ci sono nuovi requisiti. È ancora necessario decidere sulle modalità della

comunicazione esterna. Nella sezione 5.2 è esplicitamente richiesto - solo con la restrizione "se

appropriato" - che la politica energetica deve essere disponibile alle parti interessate.

a) on what it will communicate c) with whom to communicate e) who communicates

b) when to communicate; d) how to communicate

When establishing its communication process(es), the organization shall ensure that information

communicated is consistent with information generated within the EnMS and is dependable.

The organization shall establish and implement a process by which any person(s) doing work under

the organization’s control can make comments or suggest improvements to the EnMS and to energy

performance.

The organization shall consider retaining documented information (see 7.5) of the suggested

improvements.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti

chiave in

dettaglio:8.1 Operational

planning &

control

The organization shall plan, implement and control the processes, including those related to its SEUs

(see 6.3), needed to meet requirements, and to implement the actions determined in 6.2, by:

a) establishing criteria for the processes, including: the effective operation and maintenance of

facilities, equipment, systems, and energy-using processes where their absence can lead to a

significant deviation from intended energy performance;

NOTE: significant deviation criteria are determined by the organization.

b) communicating (see 7.4) the criteria to relevant person(s) doing work under the control of the

organization;

c) implementing control of the processes in accordance with the criteria; including operating and

maintaining facilities, equipment, systems and energy-using processes in accordance with

established criteria;

d) keeping documented information (see 7.5) to the extent necessary to have confidence that the

processes have been carried out as planned.

The organization shall control planned changes and review the consequences of unintended

changes, taking action to mitigate any adverse effects, as necessary.

The organization shall ensure that outsourced SEUs or processes related to its SEUs (see 6.3) are

controlled (see 8.3).

Cambiamenti significativi: l'organizzazione deve garantire che gli Usi Energetici Significativi

(SEU) esternalizzati o i processi relativi alle SEU siano gestiti. Inoltre, sono richieste informazioni

esplicitamente documentate come prova dell'esecuzione pianificata dei processi.

3.3.9

outsource - make

an arrangement

where an external

organization

(3.1.1) performs

part of an

organization’s

function or process

(3.3.6)

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

8.2 Design

The organization shall consider energy performance improvement opportunities and operational control in

the design of new, modified and renovated facilities, equipment, systems and energy-using processes that

can have a significant impact on its energy performance over the planned or expected operating lifetime.

Where applicable, the results of the energy performance consideration shall be incorporated into

specification, design and procurement activities.

The organization shall retain documented information of the design activities related to energy

performance (see 7.5).

Nello sviluppare ed implementare l’analisi energetica, un’organizzazione dovrebbe considerare che:

- considerare le prestazioni energetiche per tutta la durata operativa (operating lifetime) non

richiede un'analisi del ciclo di vita o la gestione del ciclo di vita,

- lo standard si applica alla progettazione di strutture, attrezzature, sistemi o processi che

utilizzano energia nell'ambito e nei confini del SGE,

- per nuove strutture, tecnologie e tecniche migliorate, dovrebbero essere prese in considerazione

energie alternative come energie rinnovabili o tipi di opzioni energetiche meno inquinanti.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

8.3 Procurement

The organization shall establish and implement criteria for evaluating energy performance over the

planned or expected operating lifetime, when procuring energy using products, equipment and services

which are expected to have a significant impact on the organization's energy performance.

When procuring energy using products, equipment and services that have, or can have, an impact on

SEUs, the organization shall inform suppliers that energy performance is one of the evaluation criteria for

procurement.

Where applicable, the organization shall define and communicate specifications for:

a) ensuring the energy performance of procured equipment and services;

b) the purchase of energy.

Nello sviluppare ed implementare l’analisi energetica, un’organizzazione dovrebbe considerare che:

- l'approvvigionamento è un'opportunità per migliorare le prestazioni energetiche attraverso l'uso

di energia più efficiente utilizzando prodotti e servizi. Offre l'opportunità di lavorare con la catena

di approvvigionamento e influenzare il suo comportamento energetico.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio:

9. Performance evaluation9.1 Monitoring, measurement, analysis and evaluation of energy performance and the EnMS

Focus dei requisiti sulla valutazione delle prestazioni:

- Attuazione del piano di raccolta dati energetici (cfr. 6.6)

- I dati sull'energia raccolti dovrebbero mostrare se l'organizzazione può dimostrare sia il miglioramento delle

prestazioni legate all'energia sia l'efficacia dell'EnMS.

Nuovo: deviazioni significative nelle prestazioni legate all'energia devono essere studiate e soddisfatte.

The organization shall determine for energy performance

and the EnMS:

The organization shall evaluate its energy performance and

the effectiveness of the EnMS (see 6.6).

a) what needs to be monitored and measured; Improvement in energy performance shall be evaluated by

comparing EnPI values (see 6.4) against the corresponding EnB(s)

(see 6.5).

The organization shall investigate and respond to significant

deviations in energy performance. Information on the results of the

investigation and response shall be retained as documented

information.

The organization shall retain appropriate documented

information as evidence of the results from monitoring and

measurement.

b) the methods for monitoring, measurement, analysis and evaluation, as

applicable, to ensure valid results;

c) when the monitoring and measuring shall be performed;

d) when the results from monitoring and measurement shall be analyzed

and evaluated.

NOTE 1: See ISO 50015 for additional information on measurement and

verification of energy performance.

NOTE 2: See ISO 50006 for additional information on EnPIs and EnBs.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio: 9.3 Management review

9.3.1. Top management shall

review the organization’s

EnMS, at planned intervals,

to ensure its:

9.3.2 The management review shall

include consideration of:

9.3.3 The energy performance

inputs to management review shall

include:

9.3.4 The outputs of the management review shall

include decisions related to continual improvement

opportunities and any need for changes to the

EnMS, including:

a) continuing suitabilitya) the status of actions from previous

management reviews

a) the extent to which energy targets

have been meta) opportunities to improve energy performance

b) adequacy

b) changes in external and internal issues

and associated risks and opportunities that

are relevant to the EnMS

b) energy performance and energy

performance improvement based on

monitoring and measurement results

including the EnPI(s)

b) the energy policy

c) effectiveness

c) information on the EnMS performance,

including trends in:

1. nonconformities and corrective actions

2. monitoring and measurement results

3. audit results

4. results of the evaluation of legal and

other requirements

c) status of the action plans. c) the EnPIs or EnBs

d) alignment with the strategic

direction of the organization.

d) opportunities for continual improvement,

including those for competence

d) objectives, energy targets, action plans or other

elements of the EnMS and actions to be taken if they

are not achieved

e) energy policy.e) opportunities to improve integration with business

processes

f) the allocation of resources

g) improvement of competence, awareness and

communication.

The organization shall retain documented information as evidence of the results of the management review.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

Cambiamenti chiave in dettaglio: 9.3 Management review

I requisiti e l'ambito del Riesame della Direzione sono aumentati, ad esempio sui seguenti

argomenti:

• l'input e l'output del Riesame della Direzione si concentrano sul miglioramento delle

prestazioni energetiche e sul miglioramento del sistema SGE,

• il riesame dovrebbe valutare se il SGE è conforme alla direzione strategica

dell'organizzazione,

• cambiamenti nel contesto dell'organizzazione, aspettative delle parti interessate, rischi e

opportunità,

• competenze e consapevolezza dello staff,

• comunicazioni interne ed esterne.

TÜV ITALIA Roberto Bandini

Compatibilità con altri Standard del SG

La nuova ISO 50001:2018 è stata redatta secondo i principi

dell’Annex SL Annex 2, High Level Structure (HLS), con un elevato

livello di compatibilità con altri standard del sistema di gestione.

L’adozione, sviluppo ed implementazione di SGI qualità, ambiente,

safety ed energia (per citarne solo alcuni) è stato reso più agevole

ed efficiente per le Organizzazioni.

TÜV ITALIA Roberto Bandini

EnMS – ISO 50001:2018

TÜV ITALIA Roberto Bandini

GRAZIE DELL’ATTENZIONE

ISO 50001:2018Adottare un Sistema di Gestione dell’Energia

secondo la ISO 50001:2018

TÜV ITALIA Roberto Bandini