Post on 19-Jan-2016
description
AgipFoglio / di Compilato Data
/
Rev. 0
1 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
INTERNAL NORMALIZATION
F.V. Maggio '96
REQUISITI GENERALI: 1
1. GENERAL REQUIREMENTS 1.1.
Columns for road lighting
- Rastremato a sezione circolare- Diritto a sezione poligonale- Ribaltabile manualmente a sezione circolare o poligonale .Per gli apparecchi di illuminazione sara' considerata
I pali saranno adatti per il montaggio di apparecchi
- Diritto a sezione circolare
per illuminazione stradale.Possono essere del tipo:
una massa di 20 kg e una superficie di esposizione al vento di 0,2 m² se non diversamente indicato.
1.2.
1.3.recchi illuminati saranno di acciaio al carbonio;essiPali, accessori e supporti di attacco per gli appa-
provviste di dati di identificazione seguenti:- Costruttore- Tipo costruttivo - Grado di protezione
1
I pali saranno equipaggiati con:- Accessori e supporti di attacco sulla sommita' del palo relativi al tipo di montaggio previsto dall'apparecchio di illuminazione.- Circuito elettrico completo di fusibili e morsettiere per la connessione dei cavi fissati su apposita base interna al palo oppure in cassetta esterna.- Accessori per ingresso e uscita cavi dalla cassetta (Fig.T,W o Z) come indicato al Foglio Dati.- Bullone per il collegamento di messa a terra come da ''PARTICOLARE 1''
1.1. The columns shall be designed for road luminaires mounting.It can be of type:- Straight with round section- Taper to round section - Straight with polygonal section - Manually tipping to round section or polygonalFor luminaires shall be considered a weight of20 kg and a surface resistance to wind of 0,2 m²,if not different indicated.
1.2. The columns shall be equipped with:- Fittings and top column supports designed for luminaires mounting type.
- Electric circuit with fuses and terminal blocks for cables connection fixed on the suitable internal base or in external junction box.- Fittings for entry and outlet from junction box (Fig.T,W o Z) as per indicated into Data Sheet.- Bolt for earth connection as per ''DETAIL 1''.
saranno protetti con zincatura o con ciclo di vernicia-tura antiossidante definito caso per caso.Tutti i pali saranno inoltre protetti con strati di bitumeinternamente ed esternamente nella zona da interrare.Tutta la viteria sara' in acciaio inossidabile.
1.4.cablati tra le morsettiere ''tb'' e ''TB'' con conduttoriflessibili in rame da 2,5 mm² aventi tensione nominaleUo/U >= 450/750 V.La morsettiera ''TB''con ingresso/uscita linea sara'adattata alla connessione di due cavi quadripolari conconduttori da 25 mm²La morsettiera ''tb''di uscita per alimentazione lampadesara' adattata per la connessione di cavi tripolari conconduttori da 2,5 mm² in quantita' corrispondente al
I circuiti elettrici, come da Fig. R o S , saranno
numero degli apparecchi di illuminazione.I fusibili e le relative basi (f) saranno forniti in quantita'corrispondente al numero degli apparecchi di illumi-nazione.
1.3. Columns, fittings and supports for luminaires shallbe of carbon steel; they shall be protected by galvani- zing or a undercoat cycle, defined case by case.All columns types shall be protected with bitume layers in internal and external zone that has to be laid underground. All bolts, nuts and screws shall be in stainless steelmaterial.
1.4. Electric circuits, as per Fig. R o S ,shall be wiredbetween ''tb'' and ''TB'' terminal blocks, with 2,5 mm²stranded copper wires per nominal voltage Uo/U >= 450/750 V.The ''TB''terminal block for incoming/outgoing feederline shall be designed for two four core cables with25 mm² wires.The ''tb''terminal block for outgoing feeder lamps shallbe designed for connection of three core cables with 2,5 mm² wires as per quantity of the luminaires.Fuses and bases (f) will be supplied as per quantity according to luminaires's number.
1.5. I contrassegni delle cassette di Fig. T,W,Z, saranno 1.5. The marks on junction boxes as per Fig. T,W,Z,shall have the following identification data:- Manufacturer - Manufacture type- Protection degree
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
AgipFoglio / di Compilato Data
/
Rev. 0
2 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
definito caso per caso.Quelle delle cassette di Fig.X,
Le filettature della cassetta di Fig. W, il tipo sara'
provvisorio.
1.6.
1
Ghisa Con carico unitario di rottura alla trazione
Di policloroprene (neoprene), o gomma ai siliconi.
Sara' composto per circa il 70% di fibre di vetro e materiali inerti per circa il 30% di resine poliesteri.
l'esecuzione di sicurezza.quanto stabilito nella norma di riferimento per provviste di contrassegni di identificazione secondoInoltre le cassette come a Fig. Z, saranno
in reference standard of the safety execution.be equipped with identification marks listed Moreover the junction boxes as per Fig. Z, shall
Y, Z, saranno conformi alle norme di riferimentospecificate nella documentazione allegata al''Certificato di tipo''.
Gli imbocchi liberi saranno chiusi con tappo1.7.
1.8. La viteria delle cassette sara' di acciaio inossidabile.
1.6. The threads type of the junction box as per Fig.Wshall be defined case by case. Those of the junctionboxes as per Fig. X,Y,Z, shall comply with the refe-rence standard and as specified in the documentsattached to the ''Type test certificate''.
1.7. The free hub entries shall be closed with temporary plug.
1.8. Bolts, nuts and screws of the junction boxes shall be in stainless steel material.
MATERIALS2.2. MATERIALI
R >= 196 N/mm² (MPa).
2.1.
2.2. Acciaio al carbonioPer pali con carico unitario di rottura alla trazioneR >= 360 N/mm² (MPa) - (Fe360).Per piastre di base,con carico unitario di rottura alla2.2.2.trazione R >= 360 N/mm² (MPa) - (Fe360).
2.2.1.
2.2.3.Per carpenteria varia con carico unitario di rottura allatrazione R >= 360 N/mm² (MPa) - (Fe360). Acciaio inossidabile2.3.
2.1. Cast ironWith tensile strength ofR >= 196 N/mm² (MPa).
2.2. Carbon steel 2.2.1.For columns with tensile strength
R >= 360 N/mm² (MPa) - (Fe360). 2.2.2.For anchoring plate with tensile strength
R >= 360 N/mm² (MPa) - (Fe360). 2.2.3.For miscellaneous steel structures with tensile
strength R >= 360 N/mm² (MPa) - (Fe360).
Stainless steel 2.3.Per ambienti marini 2.3.1.X2CrNiMo 1712 (AISI 316L) con carico unitario di rottuaalla trazione R >= 520 N/mm² (MPa).
Per ambienti non marini2.3.2.X5CrNi 1810 (AISI 304) con carico unitario di rottua alla trazione R >= 540 N/mm² (MPa). Ottone2.4.Tipo navale (60% di Cu).Lega leggera2.5.Lega di alluminio con contenuto in rame non superiorea 0,1 % e contenuto di magnesio non superiore al 6% in peso.
Guarnizioni 2.6.
Vetroresina 2.7.
Non dovra' accumulare cariche elettrostatiche in misura
atmosfere infiammabili.Inoltre avra':- resistenza alla temperatura compresa tra il
tale da provocare scintille pericolose per l'innesco di
-70 °C e +120 °C
2.3.1.For marine environments:X2CrNiMo 1712 (AISI 316L) with tensile strength R >= 520 N/mm² (MPa).
2.3.2.For non marine environments:X5CrNi 1810 (AISI 304) with tensile strength:R >= 540 N/mm² (MPa).
2.4. BrassNaval type (60% of Cu).
2.5. Ligth alloy Aluminium alloy with copper content not exceeding 0,1 % and magnesium content not exceeding 6% of weight.
2.6. Gasket Of polychloroprene (neoprene) or rubber silicon type
2.7. Fiber-glassThis shall be composed of about 70% of glass fibreand inert material and about 30% of polyester resin.Itmust not become electrically charged to an extent such as to cause discharges which may risk ignition ofinflammable atmospheres.In addition, this material must:- be resistant to temperatures over the range -70 °C to +120 °C
INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
AgipFoglio / di Compilato Data
/
Rev. 0
3 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1
A caldo dei pali come in 1.3. e dopo le protezioni
carattere VO se di spessore >= 3 mm, e di categoria e (CEI 50-11);i laminati,UL 94 (USA),saranno di incandescente a 960 °C secondo IEC 695-2-1- autoestinguenza:sara' riferita alla prova del filo
accordance with IEC 695-2-1 and for Italian only using the incandescent wire test at 960 °C in - Be self-extinguishing: this shall be determined
Se incluso nella fornitura,dovra' avere le seguenti 2.8. Cavo elettrico di alimentazione
3.
Ghisa Zincatura a caldo per immersione delle cassette di
3.1.
superficiali come descritto nei punti 3.2.1 e 3.2.2. In alternativa, la zona potra' essere protetta
V1 se di spessore <= 3mm. (CEI 50-11);in accordance with UL 94 (USA),sheets of thickness >= 3 mm shall be of category VO, and those of thickness <= 3 mm shall be of category V1.
caratteristiche:-Non propagante l'incendio
-Non propagante la fiamma(CEI 20-35, IEC 332-1, HD 405).-Basso contenuto emissione di gas corrosivi (CEI 20-37,IEC 754-1,IEC 754-2).- Tensione nominale: 0,6/1 kV - Tensione di prova: 4 kV c.a.-Conduttori a corda flessibile di rame rosso ricotto. -Isolamento: PVC di qualita' R2-Guaina: PVC di qualita' R2-Sigla: N1VVK (CEI UNEL 35756)
2.8.If supplied, shall be complied to the followingspecifications:
Electrical cable feeder
-Bunched cables non propagating fire
-Single cable non propagating fire (CEI 20-35, IEC 332-1, HD 405).-Low corrosive gas emission (CEI 20-37,IEC 754-1,IEC 754-2).-Rated voltage: 0,6/1 kV -Test voltage: 4 kV a.c.-Flexible conductors plait of soft red copper -Insulation: quality R2 of PVC -Sheathing: quality R2 of PVC -Tag: N1VVK (CEI UNEL 35756)
-(CEI 20-22,IEC 332-3) (CEI 20-22,IEC 332-3)
PROTEZIONI SUPERFICIALI
derivazione e dei raccordi con:-200 g/m² di superficie o 25 µm di spessore
Acciaio al carbonio3.2.Zincatura a caldo per immersione dei pali e 3.2.1.supporti, dopo la lavorazione:-600 g/m² di superficie (78 µm) con lavorati di spessore >= 3 mm.-400 g/m² di superficie (50 µm) con lavoratidi spessore <= 3 mm.La zincatura dei pali sara' interna ed esterna
Ciclo antiossidante delle torri accessorie e 3.2.2.supporti,dopo la lavorazione:-preparazione di fondo con sabbiatura Sa 2 1/2 secondo S.I.S. (Swedish Institute Standard) 055900-una mano di fondo con zincante epossidico poliammidico di spessore 50 µm.
Bitumatura 3.2.3.
esternamente con guaina termorestringente.
SURFACE PROTECTIONS 3.
3.1. Cast ironHot dip, galvanizing by immersion of the junction boxes and unions, with:-200 g/m² of surface or 25 µm minimum
3.2. Carbon steel 3.2.1.Hot dip, galvanizing by immersion of the columns,
fitting and supports after manufacture,with:-600 g/m² of surface (78 µm) for components of thickness >= 3 mm.-400 g/m² of surface (50 µm) for components of thickness <= 3 mm.The columns galvanizing will be both internal
3.2.2.Undercoat cycle of the columns, fittings and supportsafter manufacture, with:-surface preparation by sand-blasting using Sa 2 1/2 according to S.I.S. (Swedish Institute Standard) 055900 -one coat of galvanizing epoxy polyamide primer, 50 µm thick.
3.2.3.Bituminization
Hot dip bituminization of the columns as per in 1.3. and after surface protections as above in 3.2.1. or 3.2.2. In alternative the external zone will beprotected with thermal-shrink sheat.
thickness executed after their construction.
and external.
eseguita dopo la lavorazione.
INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
AgipFoglio / di Compilato Data
/
Rev. 0
4 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MA.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1
Pretrattamento chimico di conversione delle cassette
3.3. Lega leggera
di derivazione, tegoli e portelli con:-cromatazione di 0,1 µm (es.ALODINE) o altro trattamento di protezione similare.
3.3.1.
Ottone 3.4.
Cadmiatura elettrolitica o cupronichelatura da 6 a 10µm di spessore
Chemical chromate treatment of the junction boxes,
3.3. Light alloy
3.3.1.covert for cables and manhole coverts with:-0,1 µm (e.g. ALODINE) or other treatment with a similar degree of protection.
3.4. Brass
Electrolytical cadmium or cupronichel plating,thickness from 6 to 10 µm.
INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
AgipFoglio / di Compilato Data
/
Rev. 0
5 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
PALO DIRITTO A SEZIONE CIRCOLAREStraight column with circular cross section
LIVELLO FONDAZIONE
BULLONI PER FISSAGGIO SUPPORTO
Without supportSENZA SUPPORTO
h
Fig. "A"
D
H
Foundation level
d1Bolts for support fixing
A
FIG.
9
12
10
11
Height over groundALTEZZA FUORI TERRA
8
7
m
H
35A3
35A8
35A7
35A6
35A5
35A4
35A2
35A1
Code
CODICE
AgipFoglio / di Compilato Data
/
Rev. 0
6 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
PALO DIRITTO A SEZIONE CIRCOLARE
Straight column with circular cross section
CON CODOLOWith tang
Fig. "B"
D
h
Foundation levelLIVELLO FONDAZIONE
H
B
d1CODOLO FISSOImmovable tang
S 110
FIG.
9
12
11
10
8
7
6
4.5
5
4
35B9
35B13
35B14
35B12
35B11
35B10
35B8
35B7
35B6
35B5
35B4
35B3
Height over groundALTEZZA FUORI TERRA
3.5
3
m
HCODICE
Code
35B2
35B1
AgipFoglio / di Compilato Data
/
Rev. 0
7 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
PALO RASTREMATO A SEZIONE CIRCOLARE
Tapering column with circular cross section
LIVELLO FONDAZIONE
BULLONI PER FISSAGGIO SUPPORTO
SENZA SUPPORTO
Foundation level
d
D
Without support
Fig. "C"
H
d1Bolts for support fixing
ALTEZZA FUORI TERRA
C
Fig.
9
14
15
13
12
11
10
Height over ground
8
7
m
H
35C11
35C10
35C3
35C8
35C9
35C7
35C6
35C5
35C4
35C2
CodeCODICE
35C1
AgipFoglio / di Compilato Data
/
Rev. 0
8 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
PALO RASTREMATO A SEZIONE CIRCOLARE
Tapering column with circular cross section
CODOLO FISSO
LIVELLO FONDAZIONE
h
With tang
CON CODOLO
Fig. "D"
D
H
Foundation level
d1 Immovable tangS 110
D9
14
15
13
12
11
10
4.5
8
7
6
5
4
35D17
35D16
35D9
35D10
35D11
35D14
35D15
35D13
35D12
35D3
35D4
35D5
35D6
35D7
35D8
ALTEZZA FUORI TERRA
FIG.
Height over ground
3.5
3
m
HCODICE
Code
35D1
35D2
AgipFoglio / di Compilato Data
/
Rev. 0
9 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
PALO DIRITTO A SEZIONE POLIGONALEStraight column with polygonal cross section
LIVELLO FONDAZIONE
BULLONI PER FISSAGGIO SUPPORTO
SENZA SUPPORTOWithout support
Fig. "E"
D
h
H
Foundation level
d1Bolts for support fixing
E
12
16
17
18
14
15
13
10
11
9
7
8
m
35E14
35E13
35E6
35E10
35E11
35E12
35E8
35E9
35E7
35E5
35E4
35E3
35E2
35E1
ALTEZZA FUORI TERRA
FIG.
Height over ground
HCode
CODICE
AgipFoglio / di Compilato Data
/
Rev. 0
10 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
PALO DIRITTO A SEZIONE POLIGONALE
Straight column with polygonal cross section
FIG.
D
With tangCON CODOLO
Fig. "F"
h
LIVELLO FONDAZIONE
H
d1 Immovable tangCODOLO FISSO
S 110
5 35F5
35F20
35F19
35F18
35F6
35F7
35F9
35F8
35F10
35F11
35F17
35F16
35F14
35F15
35F13
35F12
15
18
17
16
14
13
12
F
10
11
9
8
7
6
CODICECode
35F1
35F2
35F3
35F4
ALTEZZA FUORI TERRAHeight over ground
3.5
4.5
H
4
m
3
AgipFoglio / di Compilato Data
/
Rev. 0
11 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
FIG.
G
8
CODECODICEH
m
9101112
35G135G235G335G435G535G6
PALO RIBALTABILE CON SISTEMA BILANCIATO MANUALE A SEZIONE POLIGONALE O CIRCOLARECircular or polygonal cross section column with manual balanced device
H
NOTE :- Le figure rappresentate sono indicative
H = altezza media della massa luminosa
h = quota di bitumazione all'interno ed esterno
della torre.
inside and outside of the mass.
h = bituminization treatment dimension of the
H = medium height of the light mass
- The rapresentative figure of the floodlighting
Notes :
must is indicative
Incoming feeding cable connec.
LIVELLO DI FONDAZIONEfoundation level
Earthing connectionsMORSETTO DI TERRA
+0.00
Earthing connectionsMORSETTO DI TERRAmast
TORRE
TIRANTIanchoring bolts
R x SOor O
TUBO IN ACCIAIO PER ALIMENT.
PIASTRAmast anchoring plate
+0.00
FIG. "G"CON PIASTRA E TIRANTIIN FONDAZIONE DI CALCESTRUZZO
in concrete foundationwith plate and anchoring bolts
d1
PORTELLA E ASOLA ( PARTIC. "X" )Manhole and slot ( Detail "X" )
Detail "X"PARTICOLARE "X"
PORTELLA E ASOLAManhole and slot
AgipFoglio / di Compilato Data
/
Rev. 0
12 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
Supports for luminaires mounting
SUPPORTI PER MONTAGGIO APPARECCHI ILLUMINANTI
Hs
1000
mm
PALOColumn
d2
A SBRACCIO SEMPLICE
Code
Simple straddle type
FIG. "N"FIG. "M"
CODICE -
35M1 35N2
Simple square type
SUPPORTO
FIG. "P"
r=
Support
Tangd Codolo
Ls
S 110
Hs
SupportSUPPORTO
ColumnPALO
S 110
d Codolo Tang
A SQUADRO SEMPLICE
FIG. "M"
d2
Hs
S 110
d Codolo Tang
35Q4
35Q3
35Q2
35Q1
FIG. "Q"
A SBRACCIO DOPPIO
Double straddle type
2500
2000
1500
1000
mm
Ls
35P4
CODICE -
FIG. "P"
35P3
35P2
35P1
Code
FIG. "Q"
Double square type
Ls
SupportSUPPORTO
PALOColumn
d2
r=
Ls
Hs
d Codolo
Column
SUPPORTOSupport
PALO
FIG. "N"
d2
Tang
S 110
Hs
AgipFoglio / di Compilato Data
/
Rev. 0
13 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
Dimensions in mm
Base column drilling and junction boxFORATURA DELLA BASE DEL PALO E CASSETTA DI DERIVAZIONE
Foundation levelLIVELLO FONDAZIONE
JUNCTION BOX
MORSETTO DI TERRA
COVERT
FIG. "T"
800-1000d:
T
FIG.
FiberglassVETRORESINA
Material
TEGOLO -
Light alloyLEGA LEGGERA
MATERIALE
DIMENSIONI IN MM -
250
min70
CASSETTA -
Covert for cablesTEGOLO
Earthing connections
a
Junction boxCASSETTA
Cables transitPASSAGGIO CAVI
PALOColumn
CONDUTTORI
IP 43
Degree ofprotection
GRADO DIPROTEZIONE Code
CODICE
35T2
35T1
conductorsearthingSlot forDI TERRA
2015
40 min
ASOLA PER
35 min
c
O 25
AgipFoglio / di Compilato Data
/
Rev. 0
14 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
FIG. "W"
cables transit
ASOLA PER
Foundation levelLIVELLO FONDAZIONE
PASSAGGIO CAVI
MORSETTO DI TERRAEarthing connections
Base column drilling and junction box
FORATURA DELLA BASE DEL PALO E CASSETTA DI DERIVAZIONE
Junction box
300 min
W
FIG.
(Per la connessione
For conduit connections).dei tubi portacavi
n.3 raccordi a 3 pezzin.3 unions
Ghisacast iron
Lega leggeraLight alloy
AssemblyMONTAGGIO
110
250
60
MaterialMATERIALE
CASSETTA -
Slot for
800-1000:d
1 1/2" 1 1/2"
1"
PALOColumn
Dimensions in mm
type 4 (NEMA)Equivalent to
al tipo 4 (NEMA)Equivalente(IEC 529)
IP 55
Ex-n
Ex-e
-
Ex-e
Ex-n
-
GRADO DIPROTEZIONE
Degree of protection Safety executionSICUREZZA
ESECUZIONE DI
DIMENSIONI IN MM -
35W4
35W6
35W5
35W3
35W1
35W2
CodeCODICE
JJ
J-J
AgipFoglio / di Compilato Data
/
Rev. 0
15 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
al tipo 4 (NEMA)
Base column drilling and junction box
FORATURA DELLA BASE DEL PALO E CASSETTA DI DERIVAZIONE
Junction box
Earthing connections250
n.3 sealings
n.3 raccordi di
(Per la connessione
For conduit connections).dei tubi portacavi
n.3 unionsn.3 raccordi a 3 pezzi
Z
FIG.
300 min
110
bloccaggio
Lega leggera
Cast ironGhisa
Light alloy
CASSETTA -
MONTAGGIOAssembly
60
FIG. "Z"
MATERIALEMaterial
cables transit
ASOLA PER
Foundation levelLIVELLO FONDAZIONE
PASSAGGIO CAVI
Slot for
d800-1000:
1 1/2" 1 1/2"
1"
MORSETTO DI TERRA
ColumnPALO
35Z2
35Z1
Dimensions in mm
Code
CODICE
type 4 (NEMA)Equivalent to
Equivalente(IEC 529)
IP 55
Ex-d
execution
SICUREZZAGRADO DI
DIMENSIONI IN MM -
PROTEZIONEDegree ofprotection
GRADO DI
Safety
J J
J-J
AgipFoglio / di Compilato Data
/
Rev. 0
16 16
NORMALIZZAZIONE INTERNA
PALI PER ILLUMINAZIONE STRADALE
05970.MAT.ELE.STD
CODICE - Code
EAM-LTG-035 ...
Sheet - of Compiled Date
Columns for road lighting
1INTERNAL NORMALIZATION
F.V. Maggio '96
2
Documento di proprieta' aziendale. La Societa' tutelera' i propri diritti a termini di legge. This document is Company property. The Company lawfully reserves all rights.
CARTUCCIA FUSIBILE DI GRANDEZZA D01, TIPO GG, CON CORRENTE NOMINALE DI 6A
Base and fuse holder of ceramic or other equivalent insulating material
BASE E PORTACARTUCCIA IN MATERIALE CERAMICO O ALTRO EQUIVALENTE DI GRANDEZZA
Wiring diagrams in the junction boxes
SCHEMI ELETTRICI DI CABLAGGIO NELLE CASSETTE
according to IEC - 269.
Fuse D01 size, gG type, with nominal current of 6A,
SECONDO IEC - 269.
with D01 size and E14 threaded according to IEC-269.
f) -
f) -
D01 , CON FILETTATURE E14 SECONDO IEC - 269.
L3
LineLINEA -
FIG. "R"
PE
N L1 L2
f
TB
ALL'APPARECCHIO DI ILLUMINAZIONETo luminaire
N L1 tb
f f
FIG. "S"
PE
LineLINEA -
L2 N L1 L3 TB
AGLI APPARECCHI DI ILLUMINAZIONETo luminaires
N L1 N L2 tb