KV-35V76 Solo Indicasiones

5/24/2018 KV-35V76 Solo Indicasiones

1/38

Trinitron Color TVOperating Instructions

KV-27S26 KV-29RS26 KV-32S26KV-27S36 KV-29RS26C KV-32S36KV-27V26 KV-29V36C KV-32TW26KV-27V36 KV-29V66M KV-32V26

KV-29V76M KV-32V36

KV-34RS26C KV-35S26 KV-37RS26KV-34V36C KV-35S36 KV-37V36MKV-35V36

KV-35V76

1997 by Sony Corporat ion


2/38

WARNINGTo prevent fire or shock hazard, do not expose the TVto rain or moistu re.

ATI'ENTIONR_SQUEDE C_OC ELECTRIQUE,NEPA$ OUVRIR

PRECAUClONRIESGO DECHOQUE ELECTRICONOABRIR

CAUTION: TO REDUCE THE It lSK OF ELECTRIC SHOCK,DO NOT REMOVE O)VER (OR BACKI.

NO USER-SERVICEABLE PARTS INS IDE.REFER I;ERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is i ntended to alert the user to'the presence of uninsulated dangerous'voltage" within the product's enclosure thatmay be of sufficient magnitude to constitutea risk of electric shock to persons.This symbol is i ntended to alert the user to_:he presence of important operating andmaintenance (servicing ) instruc tions in theliterature accompanying the appliance.

CAUTIONTO PREVEHT ELECTRIC SHOCK, DO NOT USE THISPOLARIZED AC PLUG WITH AN EXTENSION CORD,RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CANBEFULLY INSERTED TO PREVENT BLADE EXPOSURE,

CAUTIONWhen using TV games, computers, and similar productswith your TV. keep the brightness and contrastfunctions at low settings. If a f ixed (non-moving)pattern is left on the screen for long periods of time ata high brightness or contrast setting, the image can bepermanently imprinted onto the screen. Continuouslywatching the same program can cause the imprint ofstation Iogos onto the TV screen, These types ofimprints are not covered by your warranty becausethey are the result of m isuse.

Note on Caption VisionThis television receiver provides display of televisionclosed captioning in accordance with 15.119 of theFCCrules.Note on cleaning the TVClean the TV with a soft dry cloth. Never use strongsolvents such as thinner or benzine , which mightdamage the finish of the cabinet.

Note to CATV system installerThis reminder is provided to call the CATV systeminstaller's attention to Article 820-40 of the NEC thatprovides guidelines for p roper grounding and, inparticular, specifies that the cable ground shall beconnected to the grounding system of the building, asclose to the point of cable ent ry as pract ical.Use of this television receiver for other than privateviewing of programs broadcast on UHF or VHF ortransmitted by cable companies for the use of thegeneral publi c may require authorization from thebroadcasterlcable company and/or program owner.NOTIFICATIONThis equipment has been tested and found to complywith the limits for a Class B digital device pursuant toPart 15 of the FCC Rules. These limits are designed toprovide reasonable protect ion against harmful

interference in a residential installation. Thisequipment generates, uses, and can radiate radiofrequency energy and, if not installed and used inaccordance with :he instructions, may cause harmfulinteference w;th radio communications. However,there is no guarantee that interference will not occuri n a par ti cu la r i ns ta ll at ion. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interf_.rence by one or more of thefoll owi ng measures: Reorient or rel.}cate the receiving antennas. increase the separation between the equipment andreceiver. Connect the ecuipment into an outlet on a circuit

different from that to which the receiver isconnected.

Consult the dealer or an experienced radio/TVtechnician f_r help.

You a re caution ad that any changes ormodifications not expressly approved in thismanual could v,id your authority to operate thisequipment.

This document is ':or the remote con l:ro l RM-Y136A/Y137A.MODELS: KV-; 7SZ6, 27S36, 27V26, 27V36, 29RS26,

29R_26C, 29V36C, 29V66M, 29V76M, 32S26,32S36, 3 2TW26, 32V26, 3 2V36, 34RS26C,34V:36C, 35S26, 35S36 , 35V36, 35V7 6, 37RS26,37V36M


3/38

Remote Control

hi the instructions that follow, we will refertc_the buttons on llour remote control.Keep this flap un_dded and look to this pagefcr reference.

SYSTEM OFF(page 9 and 15)

DISPLAYSLEEP

JUMP_ TV/DBS

(page 20)RESET

(page 19)VOL +/-

CODE SET(page 24)

MUTINGTV (POWER)TV (FUNCTION)PIP (page 16)TV/VIDEOANT (page 3 and 15)0-9 buttons

ENTERMTS (page 20)/GUIDESelect buttons(page 12 and 18)MENU

Getting to know the buttons on theremote controlNames of the buttons on the remote control arepresenLe(i in different colors to represent theavailable functions.Button colorTransFarent ... .. .. .. Press to select the componenL

you want to control; e.g.VTR (VCR), DBS (DirectBroadcast Satellite)/CABLEoor T_

Green ............... Buttons relevant to poweroperations, like turning theTV, DBS (Direct BroadcastSatellite)/CABLE, or VTR(VCR) on or off.

Label co orWhite ............... TV/VTR (VCR)/DBS (Direct

Broadcast Satellite) / CABLEopera tion buttons.

Yellow ............... PIP operation buttons.Blue ................. DBS (Direct BroadcastSatellite) operation buttons.

Green ................ S-Link operation buttons.For a detailed explanatio_t of most buttons, see"Watchi:zg rite I3/" on page 14.


4/38

Table of Contents41elcome ........................................ 1_recautions ...................................... IJsing This Manual ........................... I

-.onnectfng and Installing the TV::onnector Types .......................................... 2daking C onnections .................................... 2

Conno:ting directly to cableor m_antenna ........................................ 2Cable or antenna ...................................... 3Cable and antenna ................................... 3Conno__ng a cable box ............................ 3Cable box and cable ................................. 3Conne:ting an antenna/cable TV systemwith a VCR .......................................... 4Corme:ting to an S Video equippedVCP ..................................................... 4Conne:_g a VCR amd TV with a cable

bOX ....................................................... 5

Conne:'ting to an SVideo equipped VCRwith a cable box ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 5Connecting a DBS receiver ...................... 6Connecting a DBS receiver and a VCR .... 6Connecting an audio system ..... .. .. .. .. .. .. .. 7Connecting an AV receiver ... .. .. .. .. .. .. .. .. .. . 7

Connecting two VCRs for tape editingusing MONITOR OUT ..... .. .. .. .. .. .. .. .. .. 8

Using the S-Link function ........................ 9Connecting a camcorder .......................... 9Installing the glass door ......................... 10Adjusting the shelf ................................. 11

Basic Set UpInserting batteries ......................................... 12Using the remote control Select buttons ..... 12Adjusting sliders .......................................... 12Chl Line Help/h_tructions ... .. .. .. .. .. .. .. .. .. .. .. . 12Using your New TVSetting up the TV automatically ... .. .. .. .. .. .. .. . 13Watching the TV .......................................... 14Watd_ing two programs at onetime -- PIP ......................................... 16

Adjusting your SETUP (menus)Learning menu selection .............................. 18Using the VIDEOmenu ............................... 19Using the AUDIO menu .............................. 20Using the TIMERmenu ............................... 21

Using the SETUP menu .............................22Operating vicreo equipmentSetting the manu: acturer's code ................... 24Operating a cable box or DBS receiverProgr_g the remote .... .. ... .. .. ... .. .. ... .. .. ...26Troubleshooting ........................... 27Specification,.: ................................ 28Index .............................................. 31

Owner's RecordThe model and serial numbers are located at the rearof the TV, below the Sony logo, on the sticker, andalso on the TV box (whi te l abel ). Record these numbersin the spaces provided below. Refer to them wheneveryou call upon yoar ;ony dealer regarding this product.

Model No. KV-Serial No.


5/38

WelcomeThank you for purchasing the Sony Trinitron Color TV. This manual is written for the modelslisted bellow. Before reading, check the modelnumber on the rear of your TV.Model KV-27S26 is used for illustrationpurpose:s. The screens displayed are for modelKV-35V36. Differences in operation features areindicated in the text; for example, "KV-27S26only".

.2 _ /Model _ _ _ .__ENumber _ _ ,

KV-27S26KV-2?V26 _l:_ZZ3__.ik:; oKV-29RS26

KV29V36C iKV-29V76_KV 32536

KV-32V26KV-34RS26C1_,.3_Kt@(:Z: : cKV35526

KV35V36

KV 3_V_ _;'V 37RS26

PrecautionsSafety Operate the TV only on 120 V AC

(except KV-29RS26C, 29V36C, 34RS26C,34V36C).Operate the TV only on 220 V AC(KV-29RS26C, 29V36C, 34RS26C, 34V 36Conly).The plug is designed, for safety purposes,to fit in the wall outlet only one way. Ifyou are unable to insert the plug full_ intothe outlet, contact your dealer(except KV-29RS26C, 29V36C, 34RS26C,34V36C).

If any liquid or solid object should fall insidethe cabinet, unplug the TV immediatebT andhave it checked by qualified personnelbefore operating it further .

If you will not be using the TV for severaldays, disconnect power by pulling theplug itself. Never pull on the cord.

For details concerning safety precautions, see thesupplied leaflet "IMPORTANT SAFEG UARD'_;'.Installing To prevent internal heat build-up, do not

block the ventilation openings. Do not install the TV in a hot or hum: d

place, or in a place subject to excessi_.edust or mechanical vibration.

Using This ManualThis manual is divided into four majorsections. We recommend that you carefullyreview th _ c ontents of each section in theorder pro_,ided to ensure that you fullyunders:and the operation of your new TV.1 Connecting and Installing the IV.

This section will guide you through yourinitial _;et u p. It will slnow you how toconnect your new components, connect toyour antenna or cable, and connect anyaccessories.Basic Set Up.This section will teach you the basic skillsneeded to operate your new TV. It willshow you how to operate special functior_sof the ::emote control.

3 Using your New TVThis s.:_ction will show you how to beginusing ' our new TV. It will show you howto use the AUTO SET UP feature, and howto use your remote control's features.

4 Adjusting your Set Up (menus).This section will teaclh you how to accessor,,-screen menus and adjust your TV'ssettings.

Instr;_ctio_::n this manualarcwrittenfor the remotecontrd. Si_i_ilarcontrolsmay befound on the TV console.


6/38

II connecting and Installing the TVConnector Types_'OUmay J ind it necessary to use some of the:ollowing connector types during set up."oaxial (:able;tandard TV Cable and Antenna connector'lug Type_t__, _@ Press onto connection;crew-on Type

_ _ Screw onto connection; Video Cabletigh quaLty Video connector for enhancedicture quality

__,, --_ _) Align guides andpress onto connection_.udio/Video Cable2onventional Audio/Video cable::::=::_:_ _ @ Press onto connectionYellow - Video

White - Audio (Left)Red - Audio (Right);-Link Cable;ony Link. connector (only available on Sony_roducts) for simultanc.ous control of youromponents_2Z_=, --* @ Press onto connection

Making ConnectionsFor best picture quality, a cable TV system oroutdoor antenna is recommended.Connecting directly to cable or anantennaThe connection you choose will depend c,nthe cable found in your home. Newer homeswill be equipped with standard coaxial cable(see A); older homes will probably have 300-ohm twin lead cable (see B ; still other homesmay contain both (see C).A

VHF only 75-ohm (Rear of TV)coaxial cable VHF/UHFor VHF/UHF --_ _

or CaNe

VHF only 300-ohm twin (Rear of TV)lead cable VHF/UHF UHF only

or VHF/UHF / K"_._

Antenna connector "N ..,_

C VHF

and

UHF: --

75-ohm coaxial cable__i_._= i_ (Rear of TV)

_..J_ (not supplied)300-ohm twin lead cable


7/38

:able or antenna,lost simple connection. Connection is madeirectly from the cable or antenna to the TV.

Cable(Rear of TV)

VHF/UHF

:able and antennaKV-27S36, 27V36, 29V36C, 29V76M, 32S36, 32V36,34V36C, 35S36, 35V36, 35V76, 37V36M only

ou may find it convenient to use the)llowing :set u p if your cable provider doesot feature local channels that you are able to:_ceive using an antenna.

(Rear of TV)AUXCATV cable(No connection "TO (_CONVERTER" in this case) TO CONVERTERAntenna cable

VHF/UHF

elect Cable or ANT mode by pressing ANT on_e remote control.

Connecting a cable boxSome pay cable TV systems use scramblec orencoded signals that require a cabIe box* toview all channels.

(Rear of TV;Cable VHF/UHF

*Cable box

Note: If you will be controlling all channel

selection through your cable box youshould consider using the CHANNEL FIXfeature discussed on page 22.

Cable box and cable KV-27S36, 27V36, 29V36C, 29V76M, 32S36, 32V36,

34V36C, 35S36, 35V36, 35V76, 37V36M onlySome pay cable "IV systems use scrambled orencoded signals requiring a cable box* only forcertain channels (e.g. HBO, SHOWTIME, _,tc.).

*Cable box (Rear of TV)AUXs.0mbl ;ZI

ch'mqels | TO CONVERTER

75-ohm coaxial icable (not supplied) (signal)

CATV cab le(urlsc "ambled channnels) VHFIUHF

For this set up, you can switch between scrambledcharmels (through your cable box), and normal(CATV) channels by presskng ANT on yourremote cor.trol.* Your Sony remote control can be programmedto open: te your cable box (see page 26).Notes: You ca anot watch the signal through the

"AUX" input as a window picture whenusing P:cmre-in-Pic_re (PIP).

If you a::econnec_ng a cable box throughthe"AUX" input and would like to switdlbetw,_n the "AUX" m_d normal (CAW) inputyou should consider using fl_eCHANNEL FIXfeature discussed on page 22.


8/38

Connecting and Installing the TV (continued)Disconnect al l power sources before making any connection:;.

:onnecl:ing an antenna/cable TV;ystem with a VCRI ' _Attach the coaxial connector from yourcable or antenna to IN on your VCR.), Using AUDIO/VIDEO connectors, connectAUD_[O and VIDEO OUT on your VCR toAUDIO and VIDEO IN on your TV(Yellow-VIDEO, White-AUDIO Left, Red-

AUDIO Right).*3 Using a coaxial connector, connect OUT onyour VCR to VHF/UHF on your TV.

IVCR must be connected and turned on to operate PIP ](KV-27526, 27V26, 29R526, 29RS26C, 29V66M,32.;26, }2TW26, 321/26, 34R526C, 35526, 37R526 on/yL

Coaxial cable

vc. to lc _ A uo _. ,, l_ Eo a V/; _? E_Connecting to an S Video equippedVCR (for optimum picture quality)1 Attack. the coaxial connector from your

cable or antenna to IN on your VCR.2 Using AUDIO conr, ectors, connect AUDIOOUT on your VCR to AUDIO IN on your TV(Wt'dte-AUDIO Left, Red-AUDIO Right).*3 Using a coaxial connector, connect OUT onyourVCR to VHF/UHF on your TV.4 Using an S VIDEO connector, connectS VIDEO on your VCR to S VIDEO on

your TV.If you are connecting a monaural VCR,connect onlyfl_esingle audio output to the leftinput on },'ourTV.

Note on DVD Connection: For the best picture quality, connect the DVD player directly to the TV.Refer to your DVD manual for detailed connection information.

4

,,Rear of TV)

I's@'l I ....

_-- 0 , 0 --'

__ UDIO-R (red)AUDIO-L (white)VIDEO (yellow)

rVMC-810S/820S (nat supp lied)

3

Cable I_ o_'_

Coaxial cable

VCR? l,2

(Rear of TV)','J DE0 JJ

sv oE o _

S VIDEO

AUDIO-R (red)YC-15V/30V AUDIO-L (white)(not supplied)

IRK-74A (not supplied )


9/38

Connecting a VCR and TV with acable boxConnect the single (input) jack of theSplitter to your incoming cable connection,and connect the other two (output) jacks(using coaxial cable) to IN on your cablebox and VHF/UHF on your TV.Using a coaxial connector, connect OUTon yo_;.r c able box to IN on your VCR.Using AUDIO/VIDEO connectors ,connect AUDIO and VIDEO OUT on yourVCR to AUDIO and VIDEO IN on yourTV (Yellow-ViDEO, White-AUDIO Left,Red-AUDIO Right).

.'onnecting to an S Video equipped/CR with a cable boxfor optimum picture quality)I-2 Perform as described above.I Using AUDIO connectors, connect AUDIOOUT on your VCR to AUDIO IN on your TV

(White-.AUDIO Left, Red-AUDIO Right).Using an S VIDEO connector, connect S VIDEOon your VCR to S VIDEO on your TV.

lote:To view scrambled channels through },ourcable box, select VIDEO 1 by pressing TViVIDEO on the remote control.

Disconnect all power sources before making any connections.VCR must be connected a nd turned on to operate PIP I(KV-2 7S26 , 2 7V26 , 2 9RS26 , 29RS26C, 29V66M,32S26, I

32TW26, 321/26, 34RS26C, 35S26 37R526 on]/). ICoaxial cable

VCR

HCable _:_- ____

Splitter Cable box(not supplied)

(Rear of TV)r VlBEO itT--i

.'Hr 'JHr AUO; OUT

...._:,-,,_ _:__up,o _, 'K :,_1,_: I

',/_---- VIDEO (yellow)VMC-810S/820S (not supplied)

(Rear of TV)

1Cable

Coaxial cable

VCR

....

Splitter(not supplied)

YC-15Vi30V(not su 3plied) __ S VIDEOAUDIO-R (red)AUDIO-L (white)

RK-74A (not ,supplied)Cable box


10/38

Connecting a DBS (Direct BroadcastSatellite) receiver1 Conrect the cable from }'our satellite antenna

to your DBS receiver.2 Attach the coaxial connector from your cable or

antenna to VHFiUHF on your TV.3 Using AUDIO/VIDEO connectors, connect

AUDIO and VIDEO OUT on your DBS receiverto AUDIO and VIDEO IN on your TV.

Connecting and Installing the TV (continued)Disconnect all power sources before making any connections.

Connecting a DBS (Direct BroadcastSatellite) receiver and a VCR1 Connect the cable from your satellite antenna

to your DBS receiver.2 Attach the coaxial connector from your cable or

antenna to VHFiUHF-IN on your VCR.3 Using a coaxial connector, connect VHF UHF-

OUT on your VCR to VHF/UHF on your TV.4 Using AUDIO/VIDEO connectors, connect

AUD]O and VIDEO OUT on your DBS receiver toAUDIO and VIDEO IN on your VCR.5 Using AUDIO/VIDEO connectors, connectAUDIO and VIDE() OUT on your VCR toAUDIO and VIDE() IN on your TV.

I

Note: To view input from the DBS or VCR, select VIDEO 1

by pressing TV/VIDEO on the remote control.6

For the highest p ictu re quality, use S VIDEO Iinstead of the yellow AUDlONIDEO cable. See I 2our DB5 manual for more information,

DBS receiver _-S_TELL_ IN

antenna/ _,_--_-'_ Jcable

(Rear of TV)

SVl_ o _

VH_,LHF iAUO,OOW

R n

#r-C_r-_r--- AU DIO-R (red)

_ _ AUDIO-L (white)'-- VIDEO (yellow)3 TVMC-810S/820S (not suppl ied)

DBS receiver

VIDEO(yellow)_AUDIO-L (white)

AUDIO-R (red)

VMC-810S/820S (not supplied )

VCR _ 2 I(Rear of TV)

_HF,UHF AUDIOOUTVIDEO ' : :'

R _

TVM 2-810S/820S (not: supp lied )


11/38

Connecting an audio systemFor greater viewing pleasure, integrate yourhome stereo into the system.1 Using AUDIO connectors, connect AUDIO

OUT on your TVto one ofthe unused Lineinputs (e.g.Tape-2, etc.) on your stereo (White-AUDIO Left, Red-AUDIORight).

2 Set yo_arstereo to the chosen Line inputand refer to page 20 of this manual foradditional audio setup instructions.

Connecting an AV receiver KV-27V:I6, 29V36C, 29V76M, 32V36, 34V36C,

35V36, 35V76, 37V36M onlyFor greater viewing pleasure, connect yourAV receiver.1 Using AUDIO/VIDEO connectors, connect

VIDE() 1 IN on your TV to Monitor AUDIOand V] D EO OUT on your AV receiver.

2 Using AUDIO/VIDEO connectors, connectTV OUT on your TV to TV AUDIO andVIDE() IN on your AV receiver.

You may want to use CHANNEL FIX to fix yourFV's inpu; to theAV recefver (VIDEO 1).5ee CHANNEL FIX, page 22.

Disconnect all power sources before making any connections.(Rear of TV)

v7 L i q_ I ' LAuoIO ;< /,_ R1AUDIO-L (white)

_ AUDIO-R (red)

RK-74A(not supplied)1

_'_t input Vt I_ I

AUO,O-R


12/38

Connecting and Installing the:onnecl:ing two VCRs for tape._diting using MONITOR OUT

KV-27V26, 27V36, 29V36C, 29V66M, 29V76M,32V26, 32V36, 34V36C, 35V36, 35V76, 37V36M only

,4ONITOR OUT gives you the ability to use aecond VCR to record a program being played}y the primary VCR or to perform tape,diting and dubbing.[ Connect the VCR intended for playback

using t]_e setup instructions on page 4 ofthis manual.Using AUDIO/VIDEO connectors,connec: AUDIO and VIDEO IN on yourVCR intended for recording to MONITORAUDIO and VIDEO OUT on your TV.

TV (continued)Disconnect all power sources before making any connection._.

VCR (for playback)tINE INout

IVMC-8105/8205 (not supplied)

(Rear of TV)iN

..... ....VCR (for recording)..................o, :

2 _ ___ VIDEO (yellow)UDIO-I (white)AUDIO-R (red)I

VMC-8" 0S/820S (not supplied)

_lotes:, Do not change the input signal while

editing through MONITOR OUT.When connecting a single VCR to the TV;if VCR LINE OUT is connected to TVVIDEO IN, do not connect the TVMONITOR OUT jacks to the VCR LINEINPUT (see right). Doing so will causeprogram interference and other viewingproblems.

[X(RearofTV)/

Indicates directionof tdgna l


13/38

Using the S-Link function, KV-27V26, 27V36, 29V36C, 29V66M, 29V76M, 32V26,

32V36, 34V36C, 35V36, 35V76, 37V36M only;-Link is a Sony innovation designed to makeyour Son}' components work together. It allowsyou to aul:omatically switch theTV input mode:o video v:hen you press PLAY on your Sony S-Link VCR. It also allows you to turn the VCRmd TV otf at the same Lime with the SYSTEMDFF button.1 Connect your VCR using the setup

instructions on page 4 of this manual.Z Using an S-Link connector, connect theS-LINI< jacks on your VCR and TV. Ensurethat both ends are seated firmly and that theTV S-LINK connector is in the same row as

the AI2 DIO/VIDEO connectors.

Disconnect all power sources before making any connections.VCR

AUDIO-L (white) _-- S-LINKVIDEO (yellow) "_I_ _ (black)I

AudiolVideo Cable(not supplied)

(Rear of TV)

_N SVI{IEO i___O_UT

2

(Front of KV-32V36, 34V36C,35V36, 35V76, 37V36M)

Connecting a camcorder, KV-27V26, 27V36, 29V36C, 29V66M, 29V76M, 32V26,

32V36, 34V36C, 35V36, 35V76, 37V36M only['his connection is convenient for viewing a)icture directly from your camcorder._Jsing AUDIO/VIDEO connectors, connect\UDIO and VIDEO OUT on your camcorder to\UDIO and VIDEO IN _n the frontpanel of your[ 'V (Yellow-VIDEO, White-AUDIO Left, Red-XUDIO Right)._ote:

If you are connecting a monoaural camcorder, connect onlythe single audio output to the left input on your TV.

V DE ) 2 INPUT

Ifyou have an S Video equipped c mcorder _ _ .you can use an S Video connection foroptimum picture quality,

VtDI O(yelIw)_ @,,,xCAUDlO-R(red)K y .;-' -'-'-' -'-'-' -'_AUDIO-Lwhite)AV output "VMC.810S/820S'] ''/___ ,_,_-,,,,_ (not supplied) l

E',-,,,,o,,_-:_-_,'.S4_=/


14/38

_H Connecting and Installing the TV (continued)(V-32TW26 and KV-35V76 only:ollow these instructions to install the glasstoor and adjust the shelf.

Note: Confirm ttuat all parts are included before

beginnh_g assembly. Ifany parts are missing,contact your dealer.

Installing the glass door1 Check that the projection of the screw

through the bottom hinge A does notinterfere with the proper installation o; thehinge to the glass door, and then insert thehinge into the hole located at the bottomright side of cabinet.

Push here to close.To open, push again.

Par ts ListA Bottam hinge _ 1B Top hinge _ 1C Screw 4x4 _ 4D pad _ 1lateE Plate _ 1F Metal pin _ 4

C

2 Attach :he top hinge B to the right side ofthe g[ass door; tighten the screws snugly,but do not overtighten. Attach the platepad D to the left side and push the plate I:over the plate pad.

B


15/38

Pushhetopglassdoorhingentothetoprightbushingndgentlyslidetheglassdoorntothebottomhinge.Adjustheglassdooruntillevel,andtightenhehingescrews.

Adjusting the shelf1 Press the upper part of the temporary

shelf supports and remove the shelf.

2 Insert the metal pin shelf supports (2 eachside).

3 InserI tt-e shelf, ensuring that the pinsupporl:_ are seated in the grooves on thebotto:n _ide of the shell .

Metal pin

1 1


16/38

_ Basic Set upInserting batteriesInsert two size AA (R6) batteries (supplied) bymatching the + and - on the batteries to thediagram inside the battery compartment.

Notes: Remove the batteries to avoid damage

from possible battery leakage wheneveryou ar ticipate that the remote control willnot be used for an extended period.

Handle the remote control with care.Avoid dropping it, getting it wet, orplacing it in direct sunlight, near a heater,or where the humidity is high.

Your remote control can be programmed tooperate most video equipment. See page 24.

Using the remote controlSelect buttons

_o_ CH

Select

The supplied remote control has selectbuttons which allow for movement of the on-screen selector in four directions. Pressing; onthe edge of the select buttons will cause theselector to movL in the selected direction.Pressing the center of the select buttons ".2E "will activate the selected item.

Adjusting slidersWhen menu items present a slider (,,,,_I:,_L_,,........r............,,.,,,,,,,,.),se the select buttons (It or I_) t o adjustthe setting.

On Line Help/InstructionsSeveral n" enu windows will provide promptsand instructions to assist: you in navigatingthrot, tgh the different functions. Whenpresented, use these to sup]dement the instructior_sin this ma:lual.


17/38

Using your New TV;ettincl up the TVtutomaticallyhe EASY SETUP GUIDE feature wqll allow you

set the on-screen language and set all receivablehannels. The EASY SETUP GUIDE screen willppear evel T time you turn on the TV until youerform AUTO PROGRAM.'he EASY SETUP GUIDE feature does not apply_r installations that use a cable box for all chmmelqcction.b set up the TV manually, refer to "Using theET UP mer on page 2.2.ips "'_"

Pe_onn thisfimction during the day, with the antennaand/or cableproperly connected, to ensure that allavailablechannels will bebroadcasting and receivable.After using EASY SETUP IF,UIDE you will still have theoption ofadjusting any of the,,system settings, likeerasingchannels, through the SET UP menu (page22).TheTV must beset to TV inpv:.to executeAUTOPROGRAM. PressAiXrI unti. thechanne number appo_rs.If your cable or antenna is connected to AUX, thenpress ANT until "AUX" appears next tothe channelmmlber. (KV-27S36, 271736, 29V36C, 29V76M,32S36, 31'.V36,34V36C, 35S36, 35V36, 35V76,37V36M only)

Using the buttons on the front of the TV:SET_p TV,'_IDEO - VOLUUE C_AN_EL po_E_olJ tZD U

For KV-27V36, 29V36C, 29V76M, 32V36,34V36C, 35V36, 35V76 and 37V36M, the cot troIbuttons are located on tt_e top of the TV.1 Press POWER to turn on the TV.

The EASY SETUP GUIDE screen appears.POWER ENGLISH : [CH]

ESPANOL : [CH-]AUTO SET UP : [VOL-]DEMO : [TV/VIDEOF ir st p lea se c on ne ctthe antennaPress ]SET UP] to exit.

2 (Except Canadian models)Press CHANNEL + to select Englishscreens or CHANNEL - to select Spanishscreens.

- CHANNEL +

3 Press VOLUME - to continue or TV \qDEOfor a DEMO of hmcfions and menus.

- VOLUME+

AUTO PROGRAM

"ALTFO PROGRAM" appears and the TVstarts scammlg m_d presetting chalmelsautomatically. When all the receivable charmelsare stor_d, the lowest numbered charmel isdisplayc:d. If the TV receives cable TV chalmek%CABLE is set ON automatically.

To perfolrm AUO SET UP again Press SET UP.

PrL_s CHANNEL + or Ct4ANNEL- to select alanguage.Press Volume - to restore factory settings("CONTINUE TO AUTO PROGRAM?"will appear on the screen. Press CH+ toexecute or CH- to exit).

Press SET UP to exit.Note: When ,,ou perform AUTO PROGRAM,

your CHANNEL FIX, TIMER, andCHANNEL BLOCK settings will beerased.

1 |


18/38

Jill using your New TV (continued)Watching the TVAll of the TV features can be accessed via there'mote control. The following chart willexplain the function of the buttons found on,our remote control

REFER TO THEILLUSTRATION OF THEREMOTE CONTROL ON THEINSIDE FRONT COVER OF

THIS MANUAL AS YOUREVIEW THIS CHART

TV (FUNCTION) Activates the remote control for use with the TV.TV POWER Turns the TV on and off. If " VIDEO" appears on the screen, press TV/VIDEO

or ANT so that a channel number appears.('_. (_ l Use for direct channel selection. Press 0-9 to select a channel (for example,

to select channel 10, press 1 and 0), the channel will change after 2 seconds,or you can press ENTER for immediate selection.

CH +/- Press to scan through the channels (+ up or - down).VOL +/- Press to adjust the volume (+ up or - down).JUMP Press to alternate or jump back and forth between two channels. You can only

jump between the last two channels that have been selected with the 0-9 keys.

MUTING Press to mute the sound ("MUTING" will appear on the screen). Press againor press VOL + to restore sound.FREEZE- Press to freeze the window picture while in PIP mode. If you are not in PIP

mode, pressing FREEZE will cause the main picture to freeze into a windowpicture. Great for copying down phone numbers, addresses, recipes, etc.


19/38

SLEEP PressepeatedlyntilheTVdisplaysheapproximateimenminutes30,60,or90)thatyouwantheTVtoremainnbeforehuttingffautomatically.CancelypressingntilSLEEPFF"ppears.DISPLAY

TV/VIDEO

Pressepeatedlyostephroughvailableisplays:StatusChannelumber,urrentime,hannelaptionifset),ndMTSmodeifSAPsselected)redisplayed.APndicationisappearsfterhreeeconds.XDSXDSExtendedataService)howsnetworkame,rogramame,programype,rogramength,alletters,ndimeoftheshowfthebroadcasterlfershisservice.CaptionisionCaptionisionillbedisplayednthescreenfthebroadcasterffershisservice.seeight)Tocancelhedisplay,ressDISPLAYepeatedlyntilDISPLAYFF"appears.DISPLAYFF"isappearsfterhreeeconds.Pressepeatedlyostephroughvailableideonputs:TV,VideoandVideo(KV-27S26,7S36,9RS26,9RS260,2S26,32S36,2TW26,4RS26C,5S26,5S36,7RS26nly)TV,Video1,VideoandVideo3(KV-27V26,7V36,9V36C,9V66M,29V76M,2V26,2V36,4V36C,5V36,5V76,7V36Mnly)ANT PressochangeheVHF UHFnputotheAUXnputKV-27S36,7V36,(AUX input) 29V360, 29V761vl,32S36, 32V36, 34V36C, 35S36, 35V36, 35V76, 37V36M only)For detai led connection information, see "Cable box and cable or "Cable and

antenna on page 3.SYSTEM OFF KV-27V26, 27V36, 29V36C, 29V66M, 29V76M, 32V26, 32V36, 34V36C,35V36, 35V76, 37V36M only.Press to turn off the TV and all other equipment connected with S-Link andreturn the TV input to either antenna or AUX, whichever was last used.

MTStG UIDE Pressthis buttonto cyclethrough the Multi -channelTV Sound(MTS) options.(page20)

CAPTIONVISION

CAPTION VISION_.l z] 1_Tt

i_ 1 TEXT 2I_t TEXT 3

TEXT 4_MENU

Some programs are broadcast with CaptionVision. Io display Caption Vision, select CC1,CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, orTEXT4 from the menu, then press DISPLAYuntil Caption Vision is displayed.CC1, CC2, CC3, or CC4 shows you a caption,that is, a printed version of the dialogue orsound effects of a program. (]he mode shouldbe set to CO1 for most programs) TEXT1,TEXr2, TEXT3, or TEXT4 shows you text, thatis, inf3rmation presented using either half or thewhole; screen. It is not usually related to theprogramNotes: Poor reception of TV programs can cause

err3rs in Caption Vision and XDS.Captions may appear with a white box orother errors instead of intended text XCS, Caption Vision, and the status displaycannot be used at the same time.

15


20/38

Using your New TV (continued)Natching two programs at one time m PIP7he Picture-in-Picture (PIP) feature allows youo view two channels simultaneously, one inhe full size "main" picture and one in a smaller'window" picture. This means that twoeparate tuners must be available to providehe two signals.2ertain mcxtels (KV-27S26, 27V26, 29RS26,:9RS26C, 2c'V66M, 32S26, 32TW26, 34KS26C, 35S26,.7RS26oN3,')are equipped with a single tuner."his simply means that a VCR must beonnected and turned on for PIP to operate.

'o e_sure acorrectsingle tuner PIP connection (KV-7S26,27V26, 29RS26, 29RS26C, 29V66]vl,32S26,2TW26,34RS26C, 35S26, 37RS26 only), make sure the,flowinglist of simple connections is complete beforesing PIP:tk cable or antenna is connected to the VCRThe VCR is connected to your TVThe VCR is turned onor detailedconnection information, seepage3-5)lote:

You must press TV (FUNCTION) before youcan conb:ol PIP with the yeUow labeled buttons.

_ REFER TO THE ILLUSTRATION OFHE REMOTE CONTROL ON THEINSIDE FRONT COVER OF THISMANUAL AS YOU REVIEW THISCHART

The sound of the mainp ictu re is received ,

Mainpicture--

Input-source mode/ or TV channel for"\ / the main picture

___ _ " d 6r...Input-sourcemodeX_'_%. ,,_-_ , I/// or TV channel for_V I LJ_J / , ."_\ "_


21/38

TVtVTR+CH-

POSITIONFREEZE

SWAP

Press to change the TV channel in the window picture (+ to increase the channel number and - to decraase).For models KV-27S26, 27V26, 29RS26, 29RS26C, 29V66M, 32S26, 32TW26, 34RS26C, 35S26, and 37RS26, ifyou are watching the video input in the window picture, you must press VTR (FUNCTION), then use the main CH +/-buttons to change channels.

Press to move the location of the window picture (counterclockwise) around the main picture.

Press to freeze the window picture. Great for copying down phone numbers, addresses, recipes, etc.If a window picture is displayed, then it will be frozen. If only the main picture is displayed, then it will be hozen anddisplayed as a window picture.Press FREEZE again to restore the previous screen(s).Press to switch the audio and video of the main picture and the window picture. Each time you press SWAP, thepicture and sound of the two will be SWAPPED.The channels being received through the AUX jack cannot be displayed as a window picture (KV-27S 6, 27V36,29V36C, 29V76M, 32,936, 32V36, 34V36C, 35,936, 35V36, 35V76, 37RS26, 37V36M on/./) .

17


22/38

iW Adjusting your SET UP (menus)Learning menu selectionUse the MENU button to access a menu anduse the SelLect buttons to alter settings. Use thefollowing example to learn how to modifysettings.1 Press the MENU button.

The main menu appears.MENU Il _'_IVIDEO 1MODE : STANDARD Ik _, t PICTURE llllliil /I" I HUE if,cam/I _ I COLOR Ililll_"'_'/BRIGHTN ESS IlID,,-',_ /

I_ SHARPNESS Ilil,,,,,,,_,|LIGHTSENSOR: ON |_L_ _MENU /Use[1_&'3 Exit_lj

2 Press t:he select buttons (4, or II,) tohighlight the desired menu and press CE)to activate it.

Press the select buttons (4' o r _) t o selectthe desired option.

[-_-'_ SET UP

@ I_I'CHAN NEL SET UPel , iCHANNEL BLOCK|I IFAVORITE CHANNELlFn_ IVLDEO LABELl_ LANGUAGE: ENGLISHI_ TILT CORRECTION: 0

| Use [_ [3_ Exit

Press _).Options for your selection will bedisplayed.

CHANNEL SET UP 1

CABLE: OFFCHANNEL FIX:A UTO P RO GR AMC HA NN EL E RA SE /A DOCHANNEL CAP TI ONZ)MENU

Use [_] (_E) Exit

I--_- _SET UPI '_ II,CHANNEL SET UP _ I CHANNEL BLOCKI _ FAVORITE CHANNEL| I ,m, [ V IDEO LABELI _L_ LANGUAGE: ENGLISHI_ TILT CORRECTION: 0

[ Use _ {_E) Exit _

5 Make)'our selection and press @. toactivate it.The previous screen will reappear.

CHANNEL SET UP_" CABLE: ON

CHANNEL FIX: OFFA UTO P RO GR AMC HA NN EL E RA SE /A DDCHANNEL CAP TI ON]]MENU

Use _ (_ Exil _,_

When you are done with changes to theselected menu, choose MENU to return to themain menu. Once you have completed allmenu corrections, press MENU on the remotecontrol to exit the menu screens.

"_SET UP 1L.._ bCHANNEL SET UP |I _ i C HANNEL BLOCK lFAVORITE CHANNEL |I VIDEO LABEL /LANGUAGE: ENGL ISH /TILT CORRECTION: 0 |

II_ _MENU //. Usa _ (_E} Exil _1

Note: Pressing MENU on the remote control will

allow yott to exit from the menus.

19


23/38

Using the VIDEO menuVIDEOMODE : STANDARD

PICTURE _ }HUECOLOR I_tl_[_ SlidersBRIGHTNESS |lill_ll==_S HARPNES S | IIM I_ ,mM ILIGHTSENSOR: ON IDMENU I

Use [_]] [_E]} Exit _ I

:or detailed information on using the remoteo modify :menu settings, refer to "Learningnenu selection" on page 18.re select the VIDEO _ menu:

Display iil> Highlight II1_ i Select

re restore the factory settings_ress RESET on the remote control while the/IDEO menu is displayed.

MODE STANDARD: Select to receive a standard picture.Customized p,'cture MOVIE: Select to receive a finely detai led picture.viewing SPORTS: Select to receive a vivid, br ight picture.PICTURE Adjust slider left (cursor down) to decrease picture contrast and soften the color.PictureAd/ustment Adjust slider right (cursor up) to increase picture contrast and create more vivid color.HUE Adjust slider left (cursor down) to decrease the green tones.PictureAdjustment Adjust slider right (cursor up) to increase the green tones.COLOR Adjust slider left (cursor down) to decrease color intensity.PictureAdjustment Adjust slider right (cursor up) to increase :olor intensity.BRIGHTNESS Adjust slider left (cursor down) to darken the picture.PictureAdjustment Adjust slider r ight (cursor up) to brighten the picture.SHARPNESS Adjust slider left (cursor down) to soften the picture.Picture Ad/usm_ent Adjust slider r ight (cursor up)to sharpen the picture.LIGHTSENSORPicture Adjustment

(KV-27V26, 27V36, 29V36C, 29V66M, 29V76M, 32V26, 32V36, 34V36C, 35V36,35V76, 37V36M only)ON: TV automatically adjusts the brightness of the picture according to the

brightness of the room.OFF: Brightness remains at preset value.

19


24/38

Adjusting your SET UP (menus) (continued)._ Using the AUDIO menu

Sliders

or detailed information on using the remote:, modify menu settings, refer to "Learning_enu selection" on page 18.o select the AUDIO , menu:Display n_ Highlight oh _ Select

5ro restore the factory settings_ress RESET on the remote control while the_UDIO menu is displayed.l'ip "'_";ress@ for direct selechon of an EFFECT se/tiHg.

TREBLE Adjust sl ider lef t (cursor down) to decrease higher pi tched sounds.Sound Adjustment Adjust sl ider r ight (cursor up) to increase higher pi tched sounds.BASS Adjust slider left (cursor down) to decrease low pitched sounds.SoundAdjust.,ment Adjust sl ider right (cursor up) to increase low pitched sounds.BALANCE Adjust slider left (cursor down) to emphasize left speaker volume.Sound Adjustment Adjust sl ider right (cursor up) to emphasize r ight speaker volume.EFFECTCustomize soundeffect based on theprogram's audio type

MTSEn/oy stereo,bil ingual and monoprograms.

SPEAKERCustom select/on ofaudio outputsourceAUDIO OUTEasy control o fvolume adjustments.

SURROUND: Simulates theater cuality sound (0nly for stereo programs:,.(KV-27S26, 27S36,29RS26, 29RS26C, 32S26, 32S36, 32TW26, 34RS26C, 35S26 35S36, 37RS26 only)SRS: Produces a dynamic three dimensional sound for stereo or encoded audiosignals. (KV-27V26, 27V36, 29V36C 29V66M, 29V76M, 32V26, 32V36,34V36C, 35V36, 35V76, 37V36M on y)SIMULATED: Adds a surround-like effec: to mono programs. (KV-27V26, 27V36,29V36C, 29V66M, 29V76M, 32V26, 32V36, 34V36C, 35V36, 35V76, 37V36M only)STEREO: Select for stereo reception when viewing a program broadcast instereo.SAP: Select to listen to bilingJal broadcast. (ron-SAP programs will be mutedwhen this feature is selected)MONO: Select for mono reception. (use to reduce noise during stereo broadcasts)Quick MTS access: Press MTS on your remote to cycle throug,h the MTS optionsas follows: (STEREO ,_ SAP ,_ MONO ,_ STEREO)ON: Select to listento the sound from the TV speakers and aseparate stereo system.OFF: SeJect to turn off the TV speakers aqd listen to the TV's sound only through

external audio system speakers.AUDIO OUT can only be set when speakers are set to OFF:.VARIABLE: Sound output wLries acco'ding to the TV settings. Volume, Bass,Treble, and Balance are adjusted th'ough the TV. Useful when you want to useyour remote to control the output of a separate audio system.FIXED: Sound output isheld at a fixed lew_l.Volume, Bass, Treble, and Balance are fixedto the factory settings. Volume adjustments are made through your stereo.


25/38

Usiing the TIMER menuTIMER I

DAYLIGHT SAVING:YES ICURRE NT TIME SE TO NI OFF T IN IE R

, _MENU ..... AM1[ Use _[_ _, -- Exit _ ]

After setting the clock you can use the timer toturn the TV on and off.F'or detailed information on using the remoteto modify menu settings, refer to "Learningmenu selection" on page 18,To select the TIMER @ menu:

Display R_,b Highlight Q Select

bTip "_"%t daylight saving time b@_resett ing the clock. A_y,_,sso_power zoill calse flTes_scttil_gs to b_ erased.

DAYLIGHTSAVINGAutomatically adjuststhetime.CURRENTTIME SETNecessary for _heTIMER.

ONtOFF TIMERWake up orscheduled viewing.

Spring: Select YES to compensate for Daylight Saving Time.The current time automaticall} moves one hour ahead.Fall: Select NO at the end of Daylight Saving Time.The current time moves back one hour.CURRENT TIME SET window wilt appear.1 Press 4.or ,I, on the select buttons urtil :he current day

(MON-SUN) is displayed. Press (z_ to select.2 Press 'J or ,_on the select buttons urtil [he current

hour (01-12) and AM/PM is displayed. Press ___ toselect.

3 Press 4.or _,on the select buttons until the currentminute (00-59) is displayec.

4 Press _.The Clock has now started. Press MENU lo exit.

CURRENT TI ME SE TI, _ __ - -:- - AM_MENU

Use [ _ C_ Ett

O N/OF F T IMER--:-- AM_h OH . ...DMENU

ON/OFF TIMER window wil l appear.1 Press ,I,o r ,I.on the select outtons until the desired day

(MON-SUN) or range of days (EVERY Sun-Sat or_.:_,_ to SUN 1 2:00 AMEVERY Mon-Fri) is displayed. Press F- select.

2 Indicate the time (hours then minutes) that you want use_ Ga ex_e_3the TV to turn on by pressing 4" or _, and then _.

3 Set the time duration (maximum of 6 hoursl bypressing I, or + and then (_.TO CANCEL THE TIMER FUNCTION, PRESS RESET.4 Press ,I, or + on the select buttons to select the desired

channel. Press ,,_, to select.The timer is now set. The TIMER indicator on your TV will be lit,Press MENU to exit.When you perform AUTO PROGRAM, all TIMER settings will beerased.

21


26/38

Adjusting your SET UP (menus) (continued)Using the SET UP menu

-_SET UP_ '--' I)'CHANNEL SET UPI _, I CHANNEL BLOCKI" I FAVORITE CHANNELF_ VIDEO LABEL

L AN GU AG E: I -E NGL IS HTILT CORRECTION: 0

DMENU

Use [_( ] C_] Exit

:or detailed information on using the remoteo modify menu settings;, refer to "Learningnenu selection" on page 18.ro seleclt the SET UP _ menu:Display ,-_ Highlight [_m-O, Select

5f any mer_u items are "grayed out'", press theXNT button on your remote so that a channelmmber appears.:avorite channel feature is not available forhe AUX input.

CHANNELSET UPBasic set up optionsfor viewing

With the CHANNEL SET UP window open:1 Use 4, or _. to select the feature you want to change.2 Press @ to access the teature.CABLE: Select ON il your TV is connected to a cable system. (AUTO SET

UP will se t CABLE to ON automatically when it programs the TV)CHANNEL FIX: Press _-_ and then use the ,I, or ,I, buttons to set the

TV's input to one of the foltow;ng opt ions:

1CHANNEL SET UP II' -;_,__;,x_ I_UTOROGRAM II

2-6: When the cable box is connected to the VHFUHF input and you do not want to switch toAUX mode. Press DBS/CABLE (FUNCTION) and then CH+/- to change channels.AUX 2-6: When a cable box is connected to AUX ar'd a cable or an tenna is ccnnected to VHFIUHF.You can alternate between the two inauts by press ing ANT on the remote conl ro l. (KV-27S36,27V36, 29V36C, 29V76M, 32S36, 32V36, 34V36C, 35S36.35V36, 35V76, 37V36M only)VIDEO 1: When you have connected video equipment (e.g. AV receiveC and you want the TV inputf ixed to i t.You wil l be able to alternate between vide() sources.OFF: When you want to switch CHANNEL FIX off.

It the TV is inAUX mode when you turn CHANNEL F IX off, p ress ANT to return to regu lar {CATV) mode.TIMER and CHANNEL BLOCK settings will be erased when CHANNEL FIX' is set.AUTO PROGRAM: Ins truc tstheTVtc automatically program all receivable channels.CHANNEL ERASEfADD: With the CHANNEL I-RASE/ADD window open:CH,_'_"E_ER*S_,DO'] 1 Place the cursor nexl to ERASE or ADD._ERASE

lDO 2 Select the desired channel using CH+t-, or by selecting with the 0"_MENUUse[0-9]or"*'-} 9 buttons .and pressing I--NTER.IO _lerl ttl_ (_ aqnelu_aal _,,_ 3 Press _) to activate.CHANNEL CAPTION: With the CHANNEL CA=TION window open:C.A.,ELC.,,r,o_ I 1 Press (-_) and ther ,I. 3r ,I, on the select buttons to select the._,4n_] desired cPannel, and prigss @ again.

2 Press I. or _, on the select bJttons to display the first letter orU_ _ E,I,_ number ol the caption and press _ to select it. (Repeat until all

four dig its are selected)3 Press '_L>' to activate. To erase a Caption, press RESEE


27/38

CHANNEl..BLOCKPrevent chhdaccessto cerfainchannels.

FAVORITECHANNEl.Outck access tofavorite channe_

VIDEO LABELEasy recogni tion ofconnected equipment(e.g. DBS, VHS, etc.).

You will be able to block two channels. With the CHANNEL BLOCK window open:1 Select 1 or 2 and press _:-:_.2 Press or _. on the select buttons to display the channel you want to block.3 Press _) to activate.When you select the blocked channel, "BLOCKED" will appear on the screen. Capt ion Vision, XDS, and output from theselected channel will also be blocked. To erase your CHANNEL BLOCK settings, press RESET while irl the CHANNELBLOCK window. When you perform AUTO PROGRAM, your CHANNEL BLOCK settings will be erasec.Setting FAVORITE CHANNEL:With the FAVORITE CHANNEL window open:1 Press _ and then or ,I, on the select buttons to select AUTO or MANUAL, and press (Z_ again.

(Selecting AUTO will cause the last five channels that you chose with the remote control 0-9 buttons to be selected)2 Press or on the select buttons to select 1,2, 3, 4, or 5 and press ,,_.3 Press or ,I, on the select buttons to select the desired channel and press _) .4 For KV-27S36, 27V36, 29V36C, 29V76M, 32S36, 32V36, 34V36C, 35S36, 35V36, 35V76, 37V36IV only, you canpreview you" favorite channels in the window picture, to do so, set PREVIEW DISPLAY to ON.

Using FAVORITE CHANNEL:1 Press _, and your FAVORITE CHANNEL options appear.2 Press or $ to select the channel you want to watch, and press _J.3 For models KV-27S36, 27V36, 29V36C, 29V76M, 32S36, 32V36, 34V36C, 35S36, 35V36, 35V76, 37V36M only,i f PREVIEW isturned on, then a window picture wi ll display your favor ite channels as you cycle through the opt ions.This feature allows you to label each input mode so that you can easily identify the connected equipment (e.g.you can label VIDEO 1 IN as VHS).1 Press or _,on the select buttons to select the input mode you want to label and press _).2 Press or to select the label and press (_.VIDEO LABEl.. Options:Vi,deo 1:VHS, 8mm, BETA, LD, GAME, DBS, DVD, WEB, RECEIVERVideo 2/3: VHS, 8mm, BETA, LD, GAME, DBS, DVD, WEBWhen VIDEO LABEL is set to WEB, the screen wil l darken significant ly, creating an ideal picture for WebTV viewing.

C_'*ANNEL BLOCK 1

i" . CH___2 CH___,_ MENU

S el ect a p ro gra mUse _ _ Ex,I

FAVORITE CHANNEL_ tO DE: AUT O= REVIEW : O NI___2___3___4...._%_NU

U_e 1}]1_13_ Exit

PREVIEW: ON I125 ESPN14 ABC48 CB SI, 16 HBO [5 CB C

E t

DEO LABEL

_' VIDEO 1: VIDEO 1VIDEO 2: VIDEO 2VI DE O 3: VIDEO 3_MENU

se _ (_) Exit

LANGUAGE (Except Canadian models)Select from available languages to cause all menus to appear inyour language of choice.TILT COFIRECTION Use this feature to correct any tilt of the picture KV-35S26, 35S36, 35V36, 35V76, 37RS26, 37V36M oMy.Adjust you; p_cture. Press or _,onthe selectbuttonsto selecta correctionbetween+5 and -5 and press _:_L_._.

23


28/38

Operating video equipmentSetting the manufacturer'scodeY'ou can use the supplied remote control tooperate Sony or non-Sony video equipmentthat has an infrared sensor.1 Press CODE SET.2 Press VTR (FUNCTION).3 Use the 0-9 buttorts to key in the

manufacturer's code number from thefollowing chart.

4 Press ENTER.

VCR manufacturer codenumbersManufacturerSonyAiwaAdmiral (lVl. Wards)Audio DynamicBel l & Howel l (M. Wards)BroksonicCanonCitizenCraigCriterionCurtis Matqis

Code301,302,303338,344327

314,337330,343319,317309,308332315,302,332315304,338,30924

Daewoo 341,312,309DBX 314,336,337Dimensia 304Emerson 319,320,316,317,318,341Fisher 330,334, 335,333Funai 338General Electric 329,304,309Go Video 322Gotdstar 332Hitachi 306,304, 305,338Instant Replay 309,308JC Penney 309,305,304,330,314,336,337JVC 314,336,337Kenwood 314,336,332,337LXl(Sears) 332,305,333,334,330,335,338Magnavox 308,309,310Marantz 314,336,337Marts 332Memorex 309,335Minolta 305,304Mitsubishi/MGA 323,324,325,326Multitech 325,338,321NEC 314,336,337Olympic 309, 308Qptimus 327Panasonic 308,309,306,307Pentax 305,304Philco 308,309Philips 308,309,310Pioneer 308Quasar 308,309,306RCA/PROSCAN 304,305,308,309,311,312,313,310,329Realistic 309,330,328,335,324,338Sansui 314

Singer 315Samsung 322, 313,321Sanyo 330,335Scott 312,313,321,335, 323,324, 325,326Sharp 327, 328Shintom 315Signature 2000 (M. Wards) 338,327Sylvania 308,309,338,310Symphonic 338SV2000 338Tashiro 332Tatung 314, 336,337Teac 314,336, 338,337Technics 309,308Toshiba, 312,311Wards 327,328,335, 331,332XR-100O 315Yamaha 330, 314, 336,337Zenith 331

MDP manufacturer codenumbersManufacturerSonyKenwoodMagnavoxMarantzMitsubishiPanasonicPhilips

Code701707703702702

704, 710703


29/38

oneer 702CA 702,709_nyo 706aarp 705amaha 703,708h_some rare cases, you may not be able to o])erateyour non-Sony video equipment with the supphedremote control. In this case, please use theequipmem's own remote control.The code _;:umbersfor Sony equipment are assig_led atthe facto G, as follows:

VHS VCR 301 (preset: code forthe supplied remotecontrol)

8 mm VCR 302Beta, ED Beta VCRs 303When you remove the batteries, the code number mayrevert to the factory setting.

Operating a VCRTo turn on or offTo select a channeldirectlyTo changechannelsTo record

To playTo stopTo fast forwardTo rewind the tapeTo pause

To search thepicture forward orbackwardTo change inputmode

Buttons on theremote controlPress VTR (POWER).Pressthe 0 - 9 buttons.Press CH +/-.Press _ while pressing @.First release I),-, thenrelease O.Press I),--.Press B.Press I_1_.Press 4t41.Press II.To resume normal playback,press again.Press I_ or _ duringplayback.To resume normal playback,release the button.Press TV/VTR.

Operating an MDP But:tons on theremote controlTo turn on or off Press VTR (POWER).To play Press the I_-.To stop Press U.To pause Press II.To resume normal

playback, press again.To search the picture Keep pressing I_ or "_forward o)backward during playback.To resume normal

playback, release thebutlon.To search the Press CH +/-.chapter fcrward orbackward

25


30/38

Operating a cable box or DBS receiverProgramming the remoteYou can program the supplied rernote controlre) operate a cable box or DBS receiver.1 Press CODE SET.2 Press DBS/CABLE (FUNCTION).3 Use the 0-9 buttons to key in the

manufacturer's code number from thefollowing chart.

4 Press ENTER.

To operate the TVPress TV (FUNCTION). Then use the TV,control battons to control the TV.For more details on operating thecable box or DBS receiver

If the remote control doesn't work First, try repeating the setup procedures

using the other codes listed for yourequipment.

Tips "_" If more than one code m_mber is listed, try cnterMg

them one by one until you come to tlte correct code foryour equipment.

If you enter a new code lll?tllber tlle code Hltlllber youprevio_sly entered at that sett ing is erased.

l_l SO lie rare cases, IjOl? ilia ] Ilo[ be able to o_2_:raleyo_r equipment with the supplied remote control Inthis case, use the equipment's own remote controlunit.

Whenever you remove the batteries -- to replacethem, for example -- it:too ,'m_ch time is ta],e_;,thecode m_mbers may revert re,the factory setting andmust be reseL

Refer to the operating instructions that comewith the equipment.

Manufacturer code numbers(cable box)Manufacturer Code numberHamliniRegal 222, 2: 3, 224, 225, 226JerroldiG. I. 201,202, 203, 204, 205, 206,

207, 208, 218Oak 227, 228, 229Panasonic 2[9, 220, 221Pioneer 214, 2_ 5Scientific Atlanta 209, 2_ 0, 211Tocom 216, 2_.7Zenith 212, 2_ 3Manufacturer code numbers(DBS receiver)Manufacturer Code numberSon), 801 (preset code forre mote control)Genera[ Electric 802RCA/PROSCAN 802


31/38

IJ TroubleshootingTroubleshootingCannot Operate Single-Tuner PIP (KV-27S26,Z7V26, 29RS26, 29RS26C, 29V66M, 32S26, 32TW26,]4RS26C, 3.=;S26, 37RS26 only)

Check that cable is connected to the VCR,and the VCR is turned on.Check that the VCR isconnected to the TV.

_o picture (screen not lit), no soundMake sure the power cord is plugged in.Operate with the buttons on the TV and theremote control.Insert the batteries in the remote controlwith the correct polarity.Replace the batteries with new ones if theyare weak.Check 1:osee if the TV/VIDEO setting iscorrect: when watching TV, set to TV, andwhen watching video tapes, set to VIDEO1,2, or 3.Try ancther channel. It could be stationtrouble.Perform AUTO SET LIP again using theSET UP button to return to the factorypreset condition. (page 13)

Poor or no picture (screen lit), good sound Adjust PICTURE in the VIDEO menu. (page 19) Adjust BRIGHTNESS in the VIDEO menu.(page 19) Check antenna cable connections. Perform AUTO SET UP again using theSET UP button to return to the factorypreset condition. (page 13) Remove objects from the front of TV.

Check the LIGHTSENSOR setting in theVIDEO menu. (page 19) When one of the video inputs is labeled asWEB, the screen will darken significantly,creating an ideal picture for WebTVviewing. (page 23)Good picture, no sound Press MUTING so that "MUTING"

disappears from the screen. (page 14) Check the MTS setting in the AUDIOmenu. (page 20) Make sure SPEAKER is set to ON in the

AUDIO menu. (page 20) Perform AUTO SET UP again using theSET UP button to return to the factorypreset condition. (page 13)No color Adjust the COLOR in the VIDEO menu.(page 19)

Black and white programs cannot be seenin color.Perform AUTO SET UP again using theSET UP button to return to the factorypreset condit ion. (page 131)

Only snow and noise appear on the screenCheck EheCABLE setting n the SET UPmenu. , 'page 22)

Check Ihe antenna/cable connections. Make sure the channel is broadcastingprog'arns. Press AN-i" t o change the input mode.(page 15)Dotted lines or stripes Adjust :he antenna. Mow) the TV away from noise sourcessuch as cars, neon signs, or hair-dryers.Double images or ghosts Use a highly directional outdoor antenna or

a cable (wqen the problem is caused byreflections from nearby mountains or tal lbuildings).Cannol operate menu If the, i tem you want to choose appears ingray you cannot select it. Press TV/

VIDEO correctly.27


32/38

Troubleshooting (continued) Specifications"annot receive upper channels (UHF)vhen using an antenna

Make sure CABLE is OFF in the SET UPmenu. (page 22)Use AUTO PROGRAM to add receivablechannels that are not presently in TVmemory. (page 22)

_,annot receive any channels when using-able TVMake sJre CABLE is ON in the SET UPmenu. (page 22)Use ALITO PROGRAM to add receivablechannels that are not presently in TVmemory. (page 22)

:{emote control does not operateBatteries could be weak. Replace thebatteries.Press TV (FUNCTION) when operatingyour TV.Make sure the TV's power cord isconnec, ted securely to the wall outlet.Locate the TV at least 3-4 feet away fromfluorescent lights.Check the S-Link connection. (page 4,5)

Cannot gain enough volume when using acable box Increase the volume at the cable box.

Then press TV (FUNCTION) and adjustthe TV's volume.TV is fixed to one channel

Try turning CHANNEL FIX off. (see page22)Use AUTO PROGRAM to add receivablechannels that are not presently in the TVmemory. (page 22)To reset the TV: First, turn the TV on.Then, while pressing the RESET key onthe remote control, press the POWER Keyon the TV. The TV will turn itself off. thenback on. When the TV turns on again, allsettings will be reset, and the EASYSETUP GUIDE will appear.

TV malfunctions when using the S-Linkfunction (KV-27V26, 27V36, 29V36C, 29V66M,29V76M, 32V26, 32V36, 34V36C, 35V36, 35V76,37V36M only) Make sure the TV's power cord is

connected securely to the wall outlet. Check the S-Link connection. (page 4,5)

Supplied accessoriesRemote control RM-Y136A (1 I(KV-27S26, 27S36, 29RS26, 29RS26C,32S26, 32S36, 32TW26, 34RS26C,

35S26, 35S36, 37RS26 only)Remote control RM-Y137A (1)(KV-27V26, 27V36, 29V36C, 29V66M,29V76M, 32V26, 32V36, 3,4V36C, 35V36,

35V76, 37V36M only)Batteries (2) size AA (R6)

OptionLal accessoriesConnecting cablesVMC-810S/820S, VMC-720M, YC-15V/30V, RK-74ATV Stand SU-27A

(KV-27S26, 27S36, 27V26, 27V36,29RS26, 29RS26C, 29V36C, 29V66M,29V/6M (except Canadian models))

TV Stand SU-32A(KV-32S26, 32S36, 32V26, 32V36,34RS23C, 34V36C (except Canadianmodels))

TV Stand SU-35A(KV-35V36, 35S26, 35S36, 37RS26,37V361vl (except Canadian models))

U/V mixer EAC-66


33/38

Specifications (continued)_ower requirementsNumber ot inpu ts/outputs

Video _)S Video 2)Aud io :)Audio out 4)Monitor out 7)TV out _)S-Link

Speaker output (W)Power consumption (W)

In use ,[Max.)In standby

Dimensions (W/H/D)(mm)(in.)

Mass (kg)(Ibs)

KV- 27S26 27S36 27V26 27V36 29RS26 29RS26C 29V36C 29V66M 29V76M120 V. 60 Hz 120 V, 60 Hz 120 V, 60 Hz 120 V, 60 Hz 120 V, 60 Hz 223V,50;60Hz 20V,50,60Hz 120 V, 60 qz 120 V, 60 Hz

2121

5Wx2

165W9W

660,4 x 602.5 x521.2 mm26 x 23 3/4x 20 ;/8 i n.

41 kg90 Ibs 7 oz

2121

5Wx2

180W9W

31311

5Wx2

180W9W

313111

lOWx2

195W13W

2121

5Wx2

165W9W

2121

5Wx2

165W9W

313111

lOWx2

660.4 x 6 02.5 x521.2 mm26 x 23 3/4x 20 % in.

42 kg92 qbs 10 o z

690 x 575.4x 5034 mm

27 74 x 22 3/4x 19 71_n.

43 kg94 Ibs 13 oz

690 x 575.4x 503.4 mm27 V_ x 2 2 3/4

x 19 % in.43kg

94 Ibs 13 oz

660.4 x 602.5 x52 1.2 mm26 x 23 %x 20 % in.

4 kg90 Ibs 7 oz

66C.4 x 602.5 x62 1.2 mm26 x 23 3/,>:20 '., '6in.

41kg90 Ibs 7 oz

195W13W

390 x 575.4( 503.4 mm7 % x 22 3/4

x 19 % in.43kg

)4 Ibs 13 oz

31311

5Wx2

180W9W

' 690 x 575.4x 503.4 rr m

27 _4 x 22 3/4x 19 % in.

43 kg94 Ibs 13 oz

313111

lOWx2

195W13W

690 x 5 75.4x 503.4 mm

27 V4 x 22 :V4x 19%in.

43 kg94 Ibs 13 oz

elevision systemAmerican TV standardhannel coverageVHF: 2-13 UHF: 14 9/CATV: 1 -125icture tub{:Hi Black Trini tron tubeisible screen size

2F-inch picture measured diagona llyctual screen size29-inch picture measured d .agona llyntenna75 ohm ex:ernal tern'dnal for VHFiUHF

'_ 1 Vp-p, 75 ohms unbalanced, sync r_egative:' Y: 1 Vp-p, 715ohms unbalanced, syr, c r, egativeC: 0.286 Vp-p (Burst signal), 75 ohms_ 500 mVrms (100% modulation), Impedance: 47kilohms

More than 408 mVrms at the maximum volumesetting (variable)More than 408 mVrms (fix)Impedance: 50 kilohms

(O) _ SRS (SOUND RETRIEVAL SYSTEM)

The (0) SRS (SOUND RETRIEVAL SYSTEM) ismanufactured by Sony Corporation under licensefrom SRSLabs, inc. It is covered IzyU.S. Patent No.4,748,669. O:her U.S. and foreign patents pending.

The word 'SRS' and the SRS symbol (O) areegistered trademarks of SR_ Labs, Inc.29


34/38

Specifica tions (continued)

Power requirementsNumber of inputs/outputs

" Video 1)SVideo 2)Audio 3)Audio out 4)Monitor out _)TV out 1}S-Link

Speaker output (W)Power consumption (W)When in use (Max.)

In standbyDimensions (W/H/D)(mm)(in.)

KV- 32S26 32S36 32TW26 32V26 32V36 34RS26C 34V36C 35S26 35S36 35V36 35V76 37RS26120V, EOHz 120V,60Hz 120V, 60Hz 12OV. 60Hz 120V,60Hz _3V,50_60Hz 220V, 50/60Hz 120V. 6CHz 120V,6C 12CV, 6OHz

2I21

2 31 12 31 I

1,

5Wx2 5Wx2

185W 190W9W 9W

3 22 13 21 1t1

10Wx2 5Wx2

323111

212I

5W:,:2 5W x 2 13Wx 2

185W 190W 210W, 275A 185W 21cW9W 9W 13W 9W 137,/

781 x712.1 781 x 712.1 942 x 1133.1 821 x 675.3 821 x 675.3 781 x 7121 821 6753x 582.8mm x582.5 mm x6615 mm x 587 mm x 587 mm ,_582.5 mm x 587mm303hx28% 303/4 x28% I 37%x44% 33'h_27% 33V2x27% _0_4 x28% 33:,2x27%

x 2qln. x23i& x26 %in. x24in, x24in, x 23in. x24]nMass (kg) 642 kg 66 kg 089 kg 70 kg 70 kg 64.3kg 70 kg

(Ibs) 141bs12ez 1451bsgoz 2401bs 1541bs6oz 154 bs6oz 1411bs12oz 1541bs6oz

2 21 12 2

1 11t5W2 5Wx215W, 230 A 215W, 2.

13_h 132_870x_61 870xJx 653r',m x653 r34 '/4 x 30 34 V._xx 25s/_n. x 25sL

83 kg 83 kc182[bsi .6oz 82bsi

Visible screen size32-inch picture measured diagonally (KV-32S26, 32S36,

32TW26, 32V26, 32V36, 34V36C)35-inch picture measured diagonally (KV-35S2fi, 35S36,

35V36, 35V76, 37RS26, 37V36M )Actual screen size34-inch picture measured diagor, ally (KV-32S26, 32S36,32TW26, 32V26, 32V36, 34V36C)37-inch picture measured diagonally (KV-35S26, 35S36,35V36, 35V76, 37RS26, 37V36M )

Television systemAmerican TV standardChannel coverage

VHF: 2-13/UHF: 14 -69/CATV: 1 - 125Picture tubeHi Black Trinit ron tubeAntenna

75 ohm external terminal for Vt-[F/UHF

7V36M120V,60 Hz

3 32 23 31 11 11 1

5Wx2 5Wx2

12 0 V, 6 0 Hz 120 V,60 Hz

3 22 13 21 111

10Wx2 5Wx2

225W 215W, 2.80A13W 13W

920 x 1207 870 x 761x713 mm x653 mm

37 % x 49% 34_kx30x 28 :,'en. x 25 % in

130 kg 63 kg

215W, 2.80A13W

920 x 7308x ,_41.8mm

i 37 % x 29%x 2674in.

90kg16 Ibs 7 oz 279 Ibs 6 oz 182 Ibs 9.6 oz

215W,2 80,_13W

920x 730.6x 641.8mm37%x29%

x 26 V._n.90kg

198 Ibs7oz

_' 1 Vp. p, 75 oh'ns unbalanced, sync r, egative-" 3r: 1 Vp-p. 75 oh.ms unbalanced, syn,: negative

C: 0.286 Vpqo (Burst signal), 75 ob, n;s3, 500 nlVr[l_.s (]00c)_ modulation), Impedance: 47 kilohms_ Mot,: than 40:} mVrms at the maximum volume selting(variabl,)More thai', 40"; mVrms (Bx)

Imp{dal ce: 53 kilohmsDesign and specifications are subject tochange without notice.


35/38

Indexdjusting your SET UP ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 18NT ............................................................................. 15ntcnna cable ............................................................... 3ntenna connector ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 2UDIO button ........................................................... 16UDIO menu operations 2AUDIO OUT .......................................................... 20BALANCE ............................................................. 20BASS ....................................................................... 20EFFECT .................................................................. 20MTS ......................................................................... 20SPEAKER ............................................................... 20TREBLE .................................................................. 20

UDIO OUTFIXED ...................................................................... 20VARIABLE ............................................................. 20

udio Video Cable ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 2[.;TO PROGRAM .................................................... 22UTO SET UP ............................................................ 22UX Hookup ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 3, 15

\LANCE .................................................................. 20\SS ............................................................................0utery installation .................................................... 12_IGHTNESS ............................................................. 19\BLE ......................................................................... 22_blebox .................................................................. 3, 5operation ................................................................ 26

Caption Vision ........................................................... 15CATV cable ................................................................... 3Coaxial cable ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 2, 4, 5CH +/-. ....................................................................... 14CHANNEL ERASE ADD ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 22CHANNEL BLOCK ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 23CHANNEL CAPTION ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 22CHANNEL FIX ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 22COLOR ........................................................................ 19Connecting TV toantenna ..................................................................... 3

audio system ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 7AV receiver .............................................................. 7cable .......................................................................... 3cable box and cable ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 3camcorder ................................................................ 9DBS receiver ............................................................ 6DBS receiver and VCR ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 6two VCRs ................................................................. 8VCR ........................................................................... 4

CURRENT TIIvIE SET ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 21DDAYLIGHT SAVING ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 21DBS receiver operation ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 26DISPLAY

Caption vision ....................................................... 15Status ...................................................................... 15XDS ......................................................................... 15

EEasy Setup Guide ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 13

Editing using monitor out .......................................... 8EFFECTS1MULA_fED..... ...................................... .............. 20SRS .......................................................................... 20Surround ................................................................ 20

FFactory settings .................................................... 19, 20FAVORITE CHANNEL ............................................ 23FAVORITE CHANNEL W / PREVIEW .................. 23Features table ............................................................... 1FREEZE butlon ................................................... 14, 17GGlass door installation ..............................................10

Adjusting shelf .......................................................11Parts li.st..................................................................10ttHook Ups ......................................................................2HUE ............................................................................. 19I, d, K[nput-source mode .................................................... 16lUMP button ............................................................... 14t.Language selection .............................................. 13,23Learning menusAUDIO .................................................................. 20

SET UP. .................................................................. 22TIMER ................................................................... 21VIDEC ................................................................... 19

L1GHTSENSORTM .................................... .................. 1331


36/38

M,NMDP operation ........................................................... 24Menu selection ........................................................... 18Mode

MOVIE ................................................................... 19SPORTS .................................................................. 19STANDARD .......................................................... 19

Monitor out .................................................................. 8Mono ............................................................................ 20MTSMAIN ..................................................................... 20

SAP ......................................................................... 20MONO .................................................................... 20

MUTING button ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 14OOn Line Help .............................................................. 12ON/OFF TIMER ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 21Other video equipment ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 24Operating video equipment . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 24P, QPicture-in-.Picture (PIP)

Main picture .......................................................... 16Window picture ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 16

PIP conne:tions (single tuner) . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 16PIP operationsAUDIO ................................................................... 16CH+i-. ................................................................... 17FREEZE .................................................................. 16PIP ........................................................................... ] 6POSITION .............................................................. 17

SWAP ..................................................................... 17TV/VIDEO ............................................................ 16TViVTR CH + ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 16

Programming the remote . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 26FIRemote control ........................................................... 14

Function buttons ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 14, 15Graphic Illustration ... .. .. .. .. .. .. .. .. .. .. .. . (inside cover)

SSAP .............................................................................. 20S-Link cable .................................................................. 2S-Link connector .......................................................... 9S-Link function ............................................................. 9S Video cable ................................................................ 2Safety ............................................................................ 1Select buttons ............................................................. 12

Adjusting sliders ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 12SET UP menu _ ... ... .... .... .... ... .... .... .... .... ... .... .... ... 22AUTO PROGRAM ..... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 22

CABLE ................................................................... 22CHANNEL ERASE/ADD ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 22CHANNEL CAPTION ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 22CHANNEL BLOCK ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 23FAVORITE CHANNEL ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 23Setting up TV .............................................................. 13

SHARPNESS .............................................................. 19SLEEP button ............................................................. 15SPEAKER

ON .......................................................................... 20OFF ........................................................................ 20

Specifications .................................................. 28, 29, 30Splitter ...........................................................................SWAP button .............................................................. 17T,UTILT CORRECTION ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 23TIMER menu operations if)CURRENT TIME SET ........................................... 21

DAYLI _,HT SAVING ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 21ON/OFF TIMER ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 21

TREBLE ....................................................................... 20Troubleshooting ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 27, 28TV (FUNCTION) button ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 14TV POWER button ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 14TV/VII)ED button ... .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 15V, W, X, _, ZVCR ........................................................................ 4, 5,VCR manufacturer code numbers . ... .... .... .... ... .... ... 24VCR oper _tion ............................................................ 25VIDEO LABEL ........................................................... 23VIDEO menu operations {._

BRIGHTNESS ........................................................ 19COLOR ................................................................... 19HUE ........................................................................ 1LIGHT3ENSOR ..................................................... 19MODE ..................................................................... 19PICTURE ................................................................ 19S[-IAR] 'NESS ......................................................... 19

VOL +/-. ..................................................................... 14VTR .............................................................................. 2XDS .............................................................................. 1


37/38


38/38

KV-35V76 Solo Indicasiones

Documents

Transcript of KV-35V76 Solo Indicasiones