INK - JET

N.B: le indicazioni riportate sulla presente scheda sono daconsiderarsi puramente indicative, in quanto fanno riferimento atests effettuati nei nostri laboratori e con nostri materiali. E' buonanorma effettuare delle prove prima di ogni produzione. Il produttoreè responsabile della sostituzione di eventuale materiale difettoso,ma non dei danni derivanti dall 'util izzo dello stesso.

T r a n s f e r p r o d u c t i o n f o r p r i n t e r s a n d c o p i e r s - P e r s o n a l i s a t i o n s o l u t i o n s

FE WHIJT 04

Transfer for ink jet printers and plotters - apply with heat-iron

To print and personalize coloured fabrics.For T-shirts, canvas, textile patches and other coloured fabrics.

Available in boxes of 50 sheets in A4 size. Other settings are available on request.

Personalisation solutions / Transfers for coloured fabrics / For ink jet printersor plotters / Apply with heat-iron

N.B. These instructions are simply suggested, since they refer to tests performed in our laboratories. You shouldperform other tests on your own before any application. The producer will substitute any defective material,but is not responsible for any damage caused by improper use.

Production code

Bypass print - plastic feel - various fabrics

For printing your own drawings with a common house-holdiron. To customize your coloured gadgets, T-shirts, shorts, mousepads, calendars, rucksacks…

The print has to be made on the matte side of the transferwithout "mirror effect". You can get your image from any PCand inkjet printer. You may even draw by hand your owndesign with pencils, pastels, water colours. Set the printer toa 300/400 dpi resolution - normal/high quality (max. 720 dpi).Work in a dry, warm place, (this product is sensitive to humidity).Let the print dry before transferring.

HOW TO TRANSFER ON COLOURED T.SHIRTS OR FABRICSWITH A HEAT-IRON.Work on a strong and firm table covered with a soft smooth cloth; the heat-iron should be set to hightemperature and pre-heated (about 185°C). Cut out the image and place the coloured side facingupwards. Place a heat resistant tissue paper on the drawing.The T-shirt has to be stretched out. Iron thetransfer on the garment continuously without stopping in any point. The hottest part of the iron is underthe handle while the point isn't warm enough to transfer the colour on the fabric. Carefully press thecorners and the borders of the image which are the most important parts. Pressing time may varydepending on the size of the image. For A4 size (cm. 21 x29.7) not less than 2 minutes. If the image issmaller than the iron, 1 minute could be enough. Wait a few seconds and remove the tissue paper. Besure to pre-heat the iron to maximum temperature before starting. This allows the colours to penetratedeep into the fabric.The T-shirt can be machine-washed at max. 40°C or hand-washed in cold or lukewarm water. Wesuggest to wash the garment inside-out. Iron on the reverse side or protect with a cloth. When you ironthe garment the colours becomes brilliant.Follow the same instructions when personalising jackets, shorts, mouse pads, calendars, rucksacks…