Estratto normativa CEI IEC 332-1 - Elan IEC 332-1 e 332-3.pdf · ELAN s.r.l. – Via Osimana, 70...
-
Upload
nguyenduong -
Category
Documents
-
view
219 -
download
4
Transcript of Estratto normativa CEI IEC 332-1 - Elan IEC 332-1 e 332-3.pdf · ELAN s.r.l. – Via Osimana, 70...
ELAN s.r.l. – Via Osimana, 70 – 60021 Camerano (AN) – Italy R.E.A. AN n.152242 – C.F. e P.IVA 01572590428 – Cap. Soc. € 98.940,00 i.v. Tel. +39.071.7304358 – Fax +39.071.7304282 www.elan.an.it – [email protected] – [email protected]
Estratto normativa CEI IEC 332-1 TEST on a single vertical insulated wire or cable.
Test sample shall be a piece of the finished wire or cable (600 +/- 25 mm long). The test apparatus
shall be contained within a suitable chamber, substantially free from draughts during the test
duration, but with facilities for disposing of noxious gases resulting from burning. The chamber
shall be maintained at a temperature of 23 +/- °C.
The ignition source shall be a gas burner complying with IEC 695-2-4/1 which includes a method of
confirmation if the test flame.
The flame shall be applied continuously for the period of time of 60s for cables with diameter
<=25mm.
The wire or cable shall pass the test if the distance between the lower edge of the top support and
the onset of charring is greater than 50mm. In addition, a failure shall be recorded if burning
extends downwards to a point greater than 540mm from the lower edge of the top support.
If a failure is recorded two more tests shall be carried out. If both tests result in passes, the wire or
cable shall be deemed to have passed the test.
CEI IEC 332-3 TEST on bunched wires or cables (same as before but applied on bunched wires or cables).
FONTE: CEI (Comitato Elettrotecnico Italiano).