CATALOGO RADIALI 2008 01 - COMEX - Home · 2018-01-09 · È responsabilità del cliente verificare...

21
RADIAL FANS JANUARY 2012 release no. 1 COMEX EUROPE Srl Via Antonio GRAMSCI, 12 42015 CORREGGIO RE ITALY TEL. +39 – 0522 – 631.433 FAX +39 – 0522 – 637.603 www.comex-europe.com [email protected]

Transcript of CATALOGO RADIALI 2008 01 - COMEX - Home · 2018-01-09 · È responsabilità del cliente verificare...

RADIAL FANS

JANUARY 2012 release no. 1

COMEX EUROPE Srl Via Antonio GRAMSCI, 12 42015 CORREGGIO – RE – ITALY TEL. +39 – 0522 – 631.433 FAX +39 – 0522 – 637.603 www.comex-europe.com [email protected]

ISTRUZIONI D’USO per ELETTROVENTILATORI, 12V – 24V C.C.

OPERATING INSTRUCTIONS for ELECTRIC FANS, 12V – 24V D.C.

Durata Elettroventole / Tensione di Alimentazione Fans Lifetime / Input Voltage Tutti i Ns. prodotti sono studiati e realizzati per uso in Corrente Continua a 12V e 24V. La Tensione massima ammessa è di 13,5V e 26,5V. Per applicazioni con Tensioni di Alimentazione superiori, vi preghiamo di contattare immediatamente il Ns. Ufficio Tecnico.

All our products are developed and realized for the use in Direct Current at 12V and 24V. The maximum Input Tension admitted is 13,5V and 26,5V. For applications with Tension over the above mentioned limits, please contact immediately our Technical Department.

Durata Elettroventole / Corrente di Alimentazione Fans Lifetime / Input Current Al fine di ottenere la migliore durata degli elettroventilatori, si raccomanda di alimentare con Corrente Continua stabilizzata, con valore di Ripple massimo residuo del 1%.Se nella corrente di alimentazione vi sono valori di Ripple superiori all’ 1%, si verificano forti riduzioni della durata (in numero di ore) del prodotto. In questo caso, si deve intervenire applicando sull’impianto dei componenti (condensatori o ponte di diodi) necessari a far rientrare il RIPPLE nel valore sopraindicato. Per ulteriori dettagli in merito vi preghiamo di contattare il Ns. Ufficio Tecnico.

To ensure the optimum lifetime for the electric fans, power them with stabilized Direct Current, with a maximum residual Ripple value of 1%. If the Ripple values of the current supplied exceed 1%, there is a great reduction in the product life (in terms of number of hours). In such a case, it is necessary to fit the plant with components (condensers or diode bridge) necessary to bring the RIPPLE within the values indicated above. For further details in this regard, please contact our Technical Department.

Sicurezza Safety E’ responsabilità del cliente verificare che il prodotto sia installato con le necessarie protezioni antinfortunistiche e che l’installazione sia eseguita nel rispetto delle norme di sicurezza vigenti nel paese di destinazione del prodotto.

It is the customer’s responsibility to ensure that the product is installed taking the necessary safety precautions, and that the installation is done in compliance with the safety regulations applicable in the country in which the product is to be used.

Fusibile di Protezione Protection Fuse Il prodotto deve essere protetto con un fusibile adeguato, che consenta la totale protezione del prodotto e dell’impianto in caso di eventuali bloccaggio accidentale della elettroventola. Si raccomanda di applicare 1 fusibile per ogni singola elettroventola. Gravi danni possono verificarsi in caso protezione di più elettroventole con 1 solo fusibile.

The product must be protected using a suitable fuse, which provides complete protection of the product and plant in the event of accidental stopping of the electric fan.We recommend application of 1 fuse for each electric fan. Severe damage can result if a single fuse is used to protect a number of electric fans.

Fori di Drenaggio Drainage Holes Per elettroventole esposte all’acqua, e montate con motore sopra e ventola sotto, si raccomanda di chiedere nell’ordine i 2 fori di drenaggio sul mozzo della ventola. Aggiungere alla fine della descrizione prodotto la sigla 2H.

For electric fans exposed to water, and fitted with the motor above and fan below, 2 drainage holes must be provided on the fan hub. Add the code 2H at the end of the product description.

Filtro Antidisturbo EMC EMC Filter A richiesta è possibile applicare il Filtro Antidisturbo sul motore. Si richiede di indicare a quale normativa si fa riferimento e i relativi valori di accettazione. Si consiglia di eseguire prove per la compatibilità elettromagnetica con le elettroventole installate sull’impianto o sul veicolo, poiché potrebbe non essere necessaria l’applicazione del filtro stesso, oppure potrebbe essere necessario l’utilizzo di un filtro con livelli di protezione maggiori .

As an optional, an EMC Filter can be fitted on the motor. It is necessary to indicate the reference standard and the relative acceptance value. Electromagnetic compatibility tests must be carried out with the electric fans installed on the plant or the vehicle, since it may not be necessary to fit a filter, or it may be necessary to use a filter with higher protection level.

COMEX EUROPE Srl

Via Antonio GRAMSCI, 12 42015 CORREGGIO (RE)

ITALY

Tel. +39 – 0522 – 631.433 Fax +39 – 0522 – 637.603

www.comex-europe.com [email protected]

VAT N° (Part.IVA) 02755210362 – Fiscal Code 02139401208 – Capitale Sociale 92.000 € i.v. – No. Iscrizione Registro Imprese di Reggio Emilia 02139401208 – No. Iscrizione R.E.A. Reggio Emilia 251275 soc. cont. da Sabe srl

ISTRUZIONI D’USO per ELETTROVENTILATORI, 12V – 24V C.C.

OPERATING INSTRUCTIONS for ELECTRIC FANS, 12V – 24V D.C.

Connettori Connectors E’ possibile applicare connettori speciali, secondo le specifiche richieste del cliente.

Special connectors can be applied to suit specific customer requests.

Selezione Prodotti Products Selection È responsabilità del cliente verificare che il prodotto selezionato sia, per caratteristiche tecniche, idoneo alla applicazione sull’impianto o sul veicolo di destinazione.

It is the customer’s responsibility to check and make sure that the product selected is suitable, as regards the technical features, for application on the plant or vehicle for which it is meant.

Caratteristiche Tecniche Technical Features Al fine di mantenere costantemente aggiornata la gamma prodotto, ci riserviamo il diritto di modificare senza nessun preavviso, le caratteristiche tecniche, dimensionali e di prestazione, indicate nel catalogo. Le prestazioni incluse in questo catalogo sono indicative. In funzione delle tolleranze generali di prodotto e delle diverse condizioni ambientali in cui opera il prodotto, sono possibili delle variazioni rispetto a quanto indicato nelle singole schede del catalogo.

In order to maintain continuously update the products range, we reserve the right to change without any advance communication, the technical features, dimensions and performance, indicated in the catalogue. The indicated performance are approximate. Depending by the general tolerance of the products and depending by the working ambient conditions where the item work, the indicated performance may change respect to the features indicated in the catalogue.

Marchio E E-Mark I modelli di elettroventilatori dal diametro pala di 167 mm. fino al diametro pala di 385 mm. sono conformi al “Marchio-E”, rif. norma 2006-28-EC.

The fan’s models from the blade diameter 167 mm. till the blade diameter 385 mm. are complying to the “E-Mark”, ref. to norm 2006-28-EC.

Edizione catalogo Catalogue Edition Questa edizione del catalogo sostituisce tutte le precedenti.

This catalogue edition replace all the previous one.

VARIATORE ELETTRONICO di VELOCITÀ (12V–24V-DC) con sistema SOFT-START incorporato di serie, e opzione di funzionamento con cicli automatici di INVERSIONE della ROTAZIONE

Il Variatore Elettronico è disponibile nelle seguenti versioni di base:

a. ESC SR = Variatore Elettronico con Rotazione STANDARD

b. ESC RR1 = Variatore Elettronico con INVERSIONE della ROTAZIONE 1 L’inversione di rotazione inizia solo quando la elettroventola ferma la rotazione in base alla temperatura impostata.

c. ESC RR2 = Variatore Elettronico con INVERSIONE della ROTAZIONE 2 L’inversione di Rotazione inizia automaticamente (anche se la temperatura è ancora alta) con un tempo di ciclo impostato sul software del variatore elettronico. Esempio: 10 min. Rotazione Standard + 30 sec. Rotazione Inversa

Per ulteriori dati tecnici si prega di contattare il nostro Ufficio Commerciale.

CARATTERISTICHE TECNICHE: Tensione di Alimentazione 7–40V-cc Corrente di lavoro (in continuo) 25Amp. max., per i modelli con INVERSIONE della ROTAZIONE Corrente di lavoro (in continuo) 30Amp. max., per i modelli con ROTAZIONE STANDARD Corrente in Stand-by 4mA a 24V Limite di Corrente 35Amp. Durata oltre 200.000 cicli L’Elettronica opera anche da SOFT-START con corrente d’avviamento non superiore al 10% della corrente

nominale Controllo in PWM Elettronica protetta contro il blocco accidentale della elettroventola per auto-protezione, è comunque

necessario applicare un FUSIBILE (per ogni singola elettroventola) di dimensione adeguata all’assorbimento dell’elettroventola utilizzata.

Protezione contro Inversione di Polarità. Protezione contro Load-Dump. Protezione contro le Scariche Elettrostatiche (ESD) riferimento alla norma EN61000-4-2 Scatola in alluminio connessa a terra tramite la scheda (PCB) Tipo di segnali:

Termostato ON-OFF (2 cavi) PWM 0-10 Volts da Segnale di Temperatura generato da sensore NTC, con regolazione della velocità in funzione della

temperatura (2 cavi). Opzione di consenso esterno

EMC – conforme alle normative di Compatibilità Elettromagnetica, subordinato all’uso di una appropriata elettroventola prodotta da COMEX EUROPE: 2004-108-EC 95-54-EC EN61000-6-3

IMMUNITÀ, conforme alle seguenti normative di IMMUNITÀ subordinato all’uso di una appropriata elettroventola prodotta da COMEX EUROPE: EN61000-4-3 (10V/m 80Mhz – 1GHz) EN61000-4-8 (100V/m@50Hz) EN61000-4-6 (Level 3) ISO7637/2 or DIN40839

Temperatura Ambiente di lavoro: –20°C / +85°C Temperatura di Stoccaggio: –40°C / +95°C Protezione IP67

ELECTRONIC SPEED CONTROL (12V–24V-DC) with SOFT-START included, and option of automatic

REVERSE ROTATION working cycles

The Electronic Speed Control is available in the following basic versions:

a. ESC SR = Electronic Speed Control with STANDARD Rotation

b. ESC RR1 = Electronic Speed Control with REVERSE Rotation 1 The Reverse Rotation begin only when the fan’s stop the normal rotation due to the low temperature.

c. ESC RR2 = Electronic Speed Control with REVERSE Rotation 2 The Reverse Rotation begin, also if the temperature it is still high, based on a fixed cycle that we set-up on the ESC according to the project’ necessity. For example 10 min. Std Rot. + 30 sec. Rev. Rot.

For more technical details please contact our Commercial Department.

TECHNICAL DATA: Rated Power supply 7–40V-dc Maximum operating current in continuous working 25Amp. for the Reverse Rotation models Maximum operating current in continuous working 30Amp. for the Standard Rotation models Stand-by current 4mA at 24V Current limit 35Amp. Lifetime over 200.000 cycles The electronic works also as SOFT-START with starting current not over the 10% of the operating current. Control type PWM The electronic is protected against any accidental block of the electric fan for the self protection, anyway it is

necessary to have a FUSE (for each single electric fan). The FUSE dimensions must be suitable for the input current of the electric fan used.

Protection against Reverse Polarity Protection against Load-Dump. Protection against ESD according EN61000-4-2 Aluminium case connected to the ground directly on the PCB Start signals:

Thermostat ON-OFF signal (2 wires) PWM 0-10 Volts Temperature signal by NTC sensor, with speed control of the fan based by Temperature (Proportional

Control) Options of external enable

EMC conformity to the following norms, using with an appropriate electric fan made by COMEX EUROPE: 2004-108-EC 95-54-EC EN61000-6-3

IMMUNITY conformity to to the following norms, using with an appropriate electric fan made by COMEX EUROPE: EN61000-4-3 (10V/m 80Mhz – 1GHz) EN61000-4-8 (100V/m@50Hz) EN61000-4-6 (Level 3) ISO7637/2 or DIN40839

Ambient Temperature: –20°C / +85°C Storage Temperature: –40°C / +95°C IP67 sealed

ES

C -

EL

EC

TR

ON

IC S

PE

ED

CO

NT

RO

L

(12

V-2

4V)

avai

labl

e fo

r ST

AN

DA

RD

RO

TA

TIO

N a

nd S

TA

ND

AR

D +

RE

VE

RS

E R

OT

AT

ION

TEMPERATURE DI LAVORO / WORKING TEMPERATURE

0112.2003.00

NTC

RESINA EPOSSIDICA / EPOXY RESIN

OTTONE CON FILETTATURA / THREAD BRASS

10 Kohm

4100 ±1%

-20°C / +105°C

CODICE / CODE

TERMISTORE / TERMISTOR

COPERTURA TERMISTORE / TERMISTOR COVERAGE

CAPSULA / BODY

R (25°C)

ß (25/100)

ß (25/100)

TEMPERATURE DI LAVORO / WORKING TEMPERATURE

NTC

RESINA EPOSSIDICA / EPOXY RESIN

OTTONE CON FILETTATURA / THREAD BRASS

10 Kohm

4100 ±1%

-20°C / +105°C

SENSORE di TEMPERATURA - NTC TEMPERATURE SENSOR - NTC

TEMPERATURE SENSOR - NTC M14x1,0

TEMPERATURE SENSOR - NTC M22x1,5

CODICE / CODE 0112.2001.01

TERMISTORE / TERMISTOR

COPERTURA TERMISTORE / TERMISTOR COVERAGE

CAPSULA / BODY

R (25°C)

mm mm

H2O H2O

0 0 990 580 5,4 0 0,0 1000 590 2,72,5 0,1 930 550 5,6 2,5 0,1 940 550 2,85,0 0,2 870 510 5,9 5,0 0,2 880 520 2,97,5 0,3 810 480 6,1 7,5 0,3 820 480 3,110,0 0,4 740 440 6,3 10,0 0,4 750 440 3,112,5 0,5 680 400 6,5 12,5 0,5 690 410 3,215,0 0,6 610 360 6,6 15,0 0,6 630 370 3,317,5 0,7 550 320 6,5 17,5 0,7 570 340 3,320,0 0,8 500 300 6,4 20,0 0,8 520 310 3,225,0 1,0 350 210 6,1 25,0 1,0 370 220 3,130,0 1,2 200 120 5,7 30,0 1,2 210 120 2,935,0 1,4 90 50 5,0 35,0 1,4 100 60 2,540,0 1,6 0 0 4,2 40,0 1,6 30 20 2,2

45,0 1,8 45,0 1,8 0 0 2,1

WEIGHT 1,20 Kg

LOW NOISE

inch inch

LOW NOISE

Current Amp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

Airflow m3/h

Airflow cfm/h

Airflow m3/h

Airflow cfm/h

Current Amp.

12V DC

R250-12E8003-R01

PressurePressure

Static Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 1,20 Kg

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inch Diametro Ventola

Test Voltage: 13,0 VOLT DC

24V DC

R250-24E8003-R01

Test Voltage: 26,0 VOLT DC

mm mm

H2O H2O

0 0 1190 700 7,8 0 0 1180 700 3,72,5 0,1 1150 680 8,1 2,5 0,1 1140 670 3,95,0 0,2 1110 650 8,5 5,0 0,2 1100 650 4,17,5 0,3 1060 630 8,7 7,5 0,3 1060 630 4,310,0 0,4 1020 600 9,1 10,0 0,4 1010 600 4,412,5 0,5 970 570 9,4 12,5 0,5 960 570 4,615,0 0,6 930 550 9,7 15,0 0,6 920 540 4,717,5 0,7 880 520 9,9 17,5 0,7 870 510 4,820,0 0,8 830 490 9,9 20,0 0,8 820 480 4,925,0 1,0 750 440 9,7 25,0 1,0 720 420 4,930,0 1,2 640 380 9,8 30,0 1,2 630 370 4,835,0 1,4 510 300 9,8 35,0 1,4 490 290 4,840,0 1,6 350 210 8,8 40,0 1,6 330 190 4,345,0 1,8 200 120 8,1 45,0 1,8 180 110 3,950,0 2,0 90 50 6,8 50,0 2,0 70 40 3,355,0 2,2 0 0 5,8 55,0 2,2 0 0 2,8

WEIGHT 1,60 Kg

LOW NOISE

inch inch

LOW NOISE

Current Amp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

Airflow m3/h

Airflow cfm/h

Airflow m3/h

Airflow cfm/h

Current Amp.

12V DC

R250-12E8101-R01

PressurePressure

Static Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 1,60 Kg

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inch Diametro Ventola

Test Voltage: 13,0 VOLT DC

24V DC

R250-24E8101-R01

Test Voltage: 26,0 VOLT DC

mm mm

H2O H2O

0 0 1100 650 7,2 0 0 1170 690 3,62,5 0,1 1080 640 7,8 2,5 0,1 1120 660 3,95,0 0,2 1040 610 8,1 5,0 0,2 1080 640 4,17,5 0,3 990 580 8,4 7,5 0,3 1040 610 4,310,0 0,4 930 550 8,8 10,0 0,4 990 580 4,512,5 0,5 880 520 9,0 12,5 0,5 940 550 4,615,0 0,6 820 480 9,2 15,0 0,6 880 520 4,817,5 0,7 760 450 9,6 17,5 0,7 820 480 4,920,0 0,8 700 410 9,7 20,0 0,8 760 450 5,025,0 1,0 590 350 10,1 25,0 1,0 650 380 5,230,0 1,2 450 270 10,1 30,0 1,2 530 310 5,335,0 1,4 270 160 9,7 35,0 1,4 350 210 5,240,0 1,6 0 0 9,1 40,0 1,6 140 80 4,9

45,0 1,8 0 0 4,8

R250-24E8101/E-R01

Test Voltage: 26,0 VOLT DC

24VDC

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 1,60 Kg

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inchDiametro Ventola

Test Voltage: 13,0 VOLT DC

Static Static

Airflowcfm/h

CurrentAmp.

12VDC

R250-12E8101/E-R01

PressurePressure

WEIGHT 1,60 Kg

LOW NOISE

inch inch

LOW NOISE

CurrentAmp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

Airflowm3/h

Airflowcfm/h

Airflowm3/h

mm mm

H2O H2O

0 0 1020 600 5,4 0 0 02,5 0,1 970 570 5,7 2,5 0,1 05,0 0,2 930 550 6,0 5,0 0,2 07,5 0,3 870 510 6,3 7,5 0,3 010,0 0,4 820 480 6,6 10,0 0,4 012,5 0,5 790 470 6,3 12,5 0,5 015,0 0,6 740 440 6,4 15,0 0,6 017,5 0,7 680 400 6,6 17,5 0,7 020,0 0,8 610 360 6,7 20,0 0,8 025,0 1,0 490 290 6,8 25,0 1,0 030,0 1,2 330 190 6,5 30,0 1,2 035,0 1,4 140 80 5,540,0 1,6 0 0 4,0

R250-24E8103-R01

Test Voltage: 26,0 VOLT DC

24V DC

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 1,60 Kg

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inch Diametro Ventola

Test Voltage: 13,0 VOLT DC

Static Static

Airflow cfm/h

Current Amp.

12V DC

R250-12E8103-R01

PressurePressure

WEIGHT 1,60 Kg

LOW NOISE

inch inch

LOW NOISE

Current Amp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

Airflow m3/h

Airflow cfm/h

Airflow m3/h

mm mm

H2O H2O

0 0 960 570 6,0 0 0 02,5 0,1 890 530 6,2 2,5 0,1 05,0 0,2 840 500 6,4 5,0 0,2 07,5 0,3 780 460 6,6 7,5 0,3 010,0 0,4 720 420 6,8 10,0 0,4 012,5 0,5 660 390 7,1 12,5 0,5 015,0 0,6 580 340 7,3 15,0 0,6 017,5 0,7 510 300 7,4 17,5 0,7 020,0 0,8 420 250 7,4 20,0 0,8 025,0 1,0 220 130 7,3 25,0 1,0 030,0 1,2 0 0 6,9 30,0 1,2 0

WEIGHT 1,60 Kg

LOW NOISE

inch inch

LOW NOISE

CurrentAmp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

Airflowm3/h

Airflowcfm/h

Airflowm3/h

Airflowcfm/h

CurrentAmp.

12VDC

R250-12E8103/E-R01

PressurePressure

Static Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 1,60 Kg

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inchDiametro Ventola

Test Voltage: 13,0 VOLT DC

24VDC

R250-24E8103/E-R01

Test Voltage: 26,0 VOLT DC

mm mm

H2O H2O

0 0 1590 940 17,7 0 0 1550 910 7,92,5 0,1 1550 910 17,9 2,5 0,1 1510 890 8,15 0,2 1500 890 18,3 5 0,2 1480 870 8,3

7,5 0,3 1460 860 18,5 7,5 0,3 1440 850 8,510 0,4 1410 830 18,6 10 0,4 1410 830 8,7

12,5 0,5 1370 810 18,8 12,5 0,5 1380 810 8,915 0,6 1340 790 19,3 15 0,6 1350 800 9,1

17,5 0,7 1290 760 19,7 17,5 0,7 1320 780 9,320 0,8 1250 740 19,8 20 0,8 1280 760 9,425 1,0 1170 690 20,4 25 1,0 1200 710 9,830 1,2 1100 650 19,0 30 1,2 1160 680 9,335 1,4 1020 600 19,4 35 1,4 1080 640 9,540 1,6 930 550 19,9 40 1,6 1000 590 9,745 1,8 830 490 20,2 45 1,8 920 540 9,950 2,0 720 420 19,9 50 2,0 830 490 10,060 2,4 500 300 19,2 60 2,4 610 360 9,770 2,8 300 180 17,8 70 2,8 340 200 8,880 3,2 140 80 15,8 80 3,2 70 40 7,690 3,6 50 30 14,3 90 3,6 0 0 6,1100 4,0 0 0 14,0 100 4,0

inch inch

LOW NOISE

Current Amp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

Airflow m3/h

Airflow cfm/h

Airflow m3/h

12V DC

R250-12L8201-R01

PressurePressure

Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 2,20 Kg

Airflow cfm/h

Current Amp.

WEIGHT 2,20 KgLOW NOISE

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inch Diametro Ventola

Test Voltage: 13,0 VOLT DC

R250-24L8201-R01

Test Voltage: 26,0 VOLT DC

24V DC

Static

mm mmH2O H2O

0,0 0 1460 860 16,5 0,0 0 1490 880 7,92,5 0,1 1440 850 17,8 2,5 0,1 1450 860 8,25,0 0,2 1420 840 18,3 5,0 0,2 1420 840 8,47,5 0,3 1380 810 18,7 7,5 0,3 1380 810 8,610,0 0,4 1330 780 19,5 10,0 0,4 1350 800 8,912,5 0,5 1320 780 20,3 12,5 0,5 1310 770 9,015,0 0,6 1270 750 20,4 15,0 0,6 1270 750 9,317,5 0,7 1230 730 21,1 17,5 0,7 1250 740 9,520,0 0,8 1190 700 21,0 20,0 0,8 1210 710 9,725,0 1,0 1100 650 21,8 25,0 1,0 1130 670 10,030,0 1,2 1020 600 22,2 30,0 1,2 1050 620 10,335,0 1,4 930 550 22,7 35,0 1,4 950 560 10,640,0 1,6 830 490 22,9 40,0 1,6 870 510 10,845,0 1,8 730 430 23,4 45,0 1,8 770 450 10,950,0 2,0 630 370 23,3 50,0 2,0 680 400 11,155,0 2,2 500 300 22,9 55,0 2,2 550 320 11,060,0 2,4 320 190 22,5 60,0 2,4 420 250 10,865 0 2 6 0 0 21 9 65 0 2 6 270 160 10 5

R250-24L8201/E-R01

Test Voltage: 26,0 VOLT DC

24V DC

Static

RADIAL FANS250 mm.FAN DIAMETER

9,8 inch Diametro Ventola

Test Voltage: 13,0 VOLT DC

Airflow cfm/h

Current Amp.

12V DC

R250-12L8201/E-R01

PressurePressure

Static

inch inchCurrent Amp.

Airflow m3/h

Airflow cfm/h

Airflow m3/h

65,0 2,6 0 0 21,9 65,0 2,6 270 160 10,570,0 2,8 0 0 10,1

LA CALOTTA MOTORE HA DEI FORI DI RAFFREDDAMENTO. PERTANTO IL MOTORE è APERTO.THE MOTOR COVER HAVE SOME HOLES FOR THE HEAT EXCHANGE THEREFORE THE MOTOR IS OPEN

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 2,20 KgWEIGHT 2,20 KgLOW NOISE LOW NOISE

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

THE MOTOR COVER HAVE SOME HOLES FOR THE HEAT EXCHANGE. THEREFORE THE MOTOR IS OPEN.

mm mm

H2O H2O

0,0 0 1420 840 14,5 0,0 0 1390 820 6,12,5 0,1 1370 810 14,6 2,5 0,1 1350 800 6,35,0 0,2 1330 780 14,9 5,0 0,2 1320 780 6,57,5 0,3 1300 770 15,3 7,5 0,3 1290 760 6,810,0 0,4 1260 740 15,4 10,0 0,4 1250 740 6,812,5 0,5 1210 710 15,6 12,5 0,5 1220 720 7,015,0 0,6 1190 700 16,2 15,0 0,6 1180 700 7,117,5 0,7 1150 680 16,3 17,5 0,7 1140 670 7,220,0 0,8 1110 650 16,6 20,0 0,8 1100 650 7,425,0 1,0 1030 610 17,1 25,0 1,0 1025 600 7,630,0 1,2 940 550 17,3 30,0 1,2 950 560 7,835,0 1,4 860 510 17,6 35,0 1,4 870 510 7,940,0 1,6 780 460 16,9 40,0 1,6 780 460 7,645,0 1,8 670 400 16,9 45,0 1,8 680 400 7,650,0 2,0 550 320 16,6 50,0 2,0 550 320 7,455,0 2,2 350 210 15,3 55,0 2,2 330 190 6,860,0 2,4 270 160 14,4 60,0 2,4 240 140 6,370,0 2,8 110 60 12,6 70,0 2,8 0 0 4,980,0 3,2 0 0 11,9 80,0 3,2

inch inch

LOW NOISE

Current Amp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

Airflow m3/h

Airflow cfm/h

Airflow m3/h

12V DC

R250-12L8203-R01

PressurePressure

Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 2,20 Kg

Airflow cfm/h

Current Amp.

WEIGHT 2,20 Kg

LOW NOISE

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inch Diametro Ventola

Test Voltage: 13,0 VOLT DC

R250-24L8203-R01

Test Voltage: 26,0 VOLT DC

24V DC

Static

mm mm

H2O H2O

0 0 1210 710 10,1 0 0 1290 760 5,62,5 0,1 1160 680 10,4 2,5 0,1 1240 730 5,85,0 0,2 1130 670 10,8 5,0 0,2 1210 710 6,07,5 0,3 1090 640 11,5 7,5 0,3 1170 690 6,210,0 0,4 1040 610 11,7 10,0 0,4 1120 660 6,312,5 0,5 980 580 11,9 12,5 0,5 1090 640 6,515,0 0,6 920 540 12,3 15,0 0,6 1050 620 6,717,5 0,7 880 520 12,5 17,5 0,7 1000 590 6,820,0 0,8 830 490 12,8 20,0 0,8 950 560 7,025,0 1,0 730 430 13,4 25,0 1,0 840 500 7,030,0 1,2 620 370 13,6 30,0 1,2 760 450 7,235,0 1,4 480 280 14,0 35,0 1,4 650 380 7,340,0 1,6 340 200 13,7 40,0 1,6 510 300 7,445,0 1,8 100 60 13,0 45,0 1,8 330 190 7,050,0 2,0 0 0 13,0 50,0 2,0 0 0 6,4

WEIGHT 2,20 Kg

LOW NOISE

inch inch

LOW NOISE

CurrentAmp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

Airflowm3/h

Airflowcfm/h

Airflowm3/h

Airflowcfm/h

CurrentAmp.

12VDC

R250-12L8203/E-R01

PressurePressure

Static Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 2,20 Kg

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inchDiametro Ventola

Test Voltage: 13,0 VOLT DC

24VDC

R250-24L8203/E-R01

Test Voltage: 26,0 VOLT DC

mm mm

H2O H2O

0 0 1030 610 6,6 0 0 1160 680 4,12,5 0,1 950 560 6,8 2,5 0,1 1100 650 4,35,0 0,2 880 520 7,1 5,0 0,2 1020 600 4,47,5 0,3 820 480 7,4 7,5 0,3 970 570 4,510,0 0,4 760 450 7,6 10,0 0,4 930 550 4,612,5 0,5 710 420 7,8 12,5 0,5 880 520 4,815,0 0,6 660 390 8,1 15,0 0,6 810 480 4,917,5 0,7 590 350 8,4 17,5 0,7 780 460 5,120,0 0,8 510 300 8,4 20,0 0,8 740 440 5,125,0 1,0 350 210 8,6 25,0 1,0 620 370 5,330,0 1,2 100 60 8,3 30,0 1,2 470 280 5,435,0 1,4 0 0 8,2 35,0 1,4 310 180 5,4

40,0 1,6 0 0 5,1

WEIGHT 2,20 Kg

LOW NOISE

inch inch

LOW NOISE

CurrentAmp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

Airflowm3/h

Airflowcfm/h

Airflowm3/h

Airflowcfm/h

CurrentAmp.

12VDC

R250-12L8204/E-R01

PressurePressure

Static Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 2,20 Kg

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inchDiametro Ventola

Test Voltage: 13,0 VOLT DC

24VDC

R250-24L8204/E-R01

Test Voltage: 26,0 VOLT DC

mm mm

H2O H2O

0,0 0 1510 890 5,3 0,0 0 1440 850 3,82,5 0,1 1470 870 5,5 2,5 0,1 1410 830 3,85,0 0,2 1440 850 5,6 5,0 0,2 1380 810 3,97,5 0,3 1400 830 5,7 7,5 0,3 1340 790 4,010,0 0,4 1370 810 5,8 10,0 0,4 1300 770 4,112,5 0,5 1330 780 6,0 12,5 0,5 1270 750 4,215,0 0,6 1300 770 6,1 15,0 0,6 1240 730 4,317,5 0,7 1260 740 6,2 17,5 0,7 1200 710 4,420,0 0,8 1230 730 6,3 20,0 0,8 1160 680 4,425,0 1,0 1160 680 6,6 25,0 1,0 1080 640 4,530,0 1,2 1080 640 6,7 30,0 1,2 1010 600 4,635,0 1,4 1010 600 6,8 35,0 1,4 930 550 4,740,0 1,6 930 550 6,9 40,0 1,6 850 500 4,545,0 1,8 840 500 6,9 45,0 1,8 760 450 4,650,0 2,0 770 450 6,7 50,0 2,0 650 380 4,555,0 2,2 630 370 6,5 55,0 2,2 510 300 4,360,0 2,4 520 310 6,4 60,0 2,4 370 220 4,265,0 2,6 340 200 6,0 65,0 2,6 250 150 3,870,0 2,8 260 150 5,4 70,0 2,8 120 70 3,480,0 3,2 0 0 4,4 80,0 3,2 0 0 3,1

R250-48L8201/E3-R01

Test Voltage: 48,0 VOLT DC

48V DC

Static

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inch Diametro Ventola

Test Voltage: 36,0 VOLT DC

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 2,20 Kg

Airflow cfm/h

Current Amp.

WEIGHT 2,20 Kg

LOW NOISE

36V DC

R250-36L8201/E3-R01

PressurePressure

Static

inch inch

LOW NOISE

Current Amp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 Pa Airflow rate: 1 m3/h = 0,59 cfm

Airflow m3/h

Airflow cfm/h

Airflow m3/h

mm mm

H2O H2O

0,0 0 0 0,0 0 1500 890 4,02,5 0,1 0 2,5 0,1 1470 870 4,15,0 0,2 0 5,0 0,2 1430 840 4,17,5 0,3 0 7,5 0,3 1400 830 4,210,0 0,4 0 10,0 0,4 1370 810 4,312,5 0,5 0 12,5 0,5 1340 790 4,415,0 0,6 0 15,0 0,6 1300 770 4,417,5 0,7 0 17,5 0,7 1260 740 4,520,0 0,8 0 20,0 0,8 1240 730 4,625,0 1,0 0 25,0 1,0 1160 680 4,830,0 1,2 0 30,0 1,2 1090 640 4,935,0 1,4 0 35,0 1,4 990 580 5,040,0 1,6 0 40,0 1,6 920 540 5,145,0 1,8 0 45,0 1,8 840 500 5,250,0 2,0 0 50,0 2,0 740 440 5,255,0 2,2 0 55,0 2,2 500 300 5,060,0 2,4 0 60,0 2,4 220 130 4,565,0 2,6 0 65,0 2,6 0 0 3,8

inch inch

LOW NOISE

CurrentAmp.

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

Airflowm3/h

Airflowcfm/h

Airflowm3/h

36VDC

R250-36L8201/E3-R01

PressurePressure

Static

The dimensions are in mm. ( 25,4 mm. = 1 inch )

WEIGHT 2,20 Kg

Airflowcfm/h

CurrentAmp.

WEIGHT 2,20 Kg

LOW NOISE

RADIAL FANS

Static Pressure: 1 mm H2O = 0,04 inch H2O 1 mm H2O = 9,8 PaAirflow rate: 1 m3/h = 0,59 cfm

250 mm.FAN DIAMETER9,8 inchDiametro Ventola

Test Voltage: 39,0 VOLT DC

R250-48L8201/E3-R01

Test Voltage: 52,0 VOLT DC

48VDC

Static

mm

H2O

0 0 800 470 16,9 05 0,2 780 460 17,1 010 0,4 750 440 17,2 015 0,6 720 420 17,4 020 0,8 700 410 17,5 025 1,0 670 400 17,5 030 1,2 640 380 17,5 035 1,4 610 360 17,6 040 1,6 580 340 17,6 045 1,8 550 320 17,6 050 2,0 510 300 17,5 060 2,4 430 250 17,1 070 2,8 330 190 16,4 080 3,2 220 130 15,1 090 3,6 70 40 13,0 0100 4,0 0 0 12,7 0

Current Amp.

The dimensions are in mm. ( 25,4 mm. = 1 inch )

Pressure

Static

Airflow rate: 1 m3/h = 0,59 cfm WEIGHT 3,15 Kg

ELETTROVENTOLA CENTRIFUGA CENTRIFUGAL BLOWER

Airflow m3/h

Airflow cfm/h

Airflow m3/h

Airflow cfm/h

Static Pressure: 1 mm H2O = 0,04 inch H2O Static Pressure: 1 mm H2O = 9,8 Pa

12V-DC 24V-DC

C001-12L8201-R01 C001-24L8201-R01

Test Voltage: 13,0 VOLT DC Test Voltage: 26,0 VOLT DC

inchCurrent Amp.

mm

H2O

0 0 0 570 340 3,05 0,2 0 530 310 3,010 0,4 0 490 290 3,015 0,6 0 440 260 3,020 0,8 0 400 240 3,025 1,0 0 350 210 3,030 1,2 0 290 170 2,935 1,4 0 230 140 2,740 1,6 0 170 100 2,545 1,8 0 100 60 2,450 2,0 0 50 30 2,260 2,4 0 0 0 2,170 2,880 3,290 3,6100 4,0

Current Amp.

The dimensions are in mm. ( 25,4 mm. = 1 inch )

Pressure

Static

Airflow rate: 1 m3/h = 0,59 cfm WEIGHT 1,30 Kg

ELETTROVENTOLA CENTRIFUGA CENTRIFUGAL BLOWER

Airflow m3/h

Airflow cfm/h

Airflow m3/h

Airflow cfm/h

Static Pressure: 1 mm H2O = 0,04 inch H2O Static Pressure: 1 mm H2O = 9,8 Pa

12V-DC 24V-DC

C001-12E8003-R01 C001-24E8003-R01

Test Voltage: 13,0 VOLT DC Test Voltage: 26,0 VOLT DC

inchCurrent Amp.