Catalogo gipiemme 2007
-
Upload
gipiemme-srl -
Category
Documents
-
view
227 -
download
0
description
Transcript of Catalogo gipiemme 2007
HIGHPERFORMANCE
WHEELS AND SADDLES
Gipiemme nel corso degli anni
ha sempre più investito nel top di gamma e si è sempre più
specializzata nella ricerca dei migliori materiali che garantiscono un incremento
delle prestazioni sportive. E’ stato creato un reparto interno specializzato per la lavorazione
del carbonio, in quanto questo materiale viene sempre più impiegato nel campo sportivo, riproponendo
parte di quanto già realizzato nel settore aerospaziale e tecnico avanzato. Il successo dei nostri prodotti in
carbonio sono legati alle caratteristiche principali che rendono il carbonio un materiale particolarmente indicato per
migliorare le performance delle ruote: basso peso specifi co (densità), elevate proprietà meccaniche, fattibilità di strutture
monolitiche e possibilità di ottenere il desiderato rapporto tra rigidezza e resistenza. Oltre al carbonio, Gipiemme ricerca e
utilizza le leghe migliori: alluminio, Ergal, titanio e acciai speciali. Questo ha permesso di realizzare delle ruote ideali: reattive
durante gli scatti, ma al contempo confortevoli nelle uscite di lunga percorrenza. SBS Short Braking System: la rivoluzione
Gipiemme del sistema di frenata. Il brevetto SBS Short Braking System garantisce una eccezionale riduzione dello spazio
di frenata e contemporaneamente la assoluta sicurezza nella tenuta di strada. Il sistema SBS è realizzato con una
speciale lavorazione del cerchio che, grazie alla esclusiva di alcune resine ad alto coeffi ciente di attrito garantisce
una incredibile riduzione nello spazio di frenata utilizzando i normali pattini freno. Con il sistema SBS
inoltre, la decelerazione della velocità è realizzata in tutta sicurezza perché non innesca il bloc-
caggio delle ruote e grazie all’immediato smaltimento dell’acqua, elimina l’effetto
acqua-planning garantendo una frenata rapida e in totale sicurez-
za anche in caso di pioggia.
Gipiemme in the past few
years has made considerable invest-
ments in its top end products. As a result of these inve-
stments, Gipiemme is one of the leading experts in the research and
subsequent selection the best materials to increase the sporting performance
of the Gipiemme bicycle products. With this in mind, Gipiemme has created a separate
department specializing in carbon fi ber products. As this material, carbon fi ber is now widely
used in many areas of sport activities; whereas before, it was exclusive to the aerospace and highly
technical business sectors. It was and is important to Gipiemme that it has its own expertise to fully un-
derstand, develop and apply this unique material in relationship to the performance of its products. The use
of carbon fi ber material in the Gipiemme wheels greatly enhances the technical and actual riding performances
of its bicycle wheels. The main characteristics are low specifi c weight, high mechanical properties with the highest
ratios between rigidity and resistance per its material weight. Besides carbon fi ber, Gipiemme also continues to con-
duct thorough research and development in the newest materials developments in the fi eld of Aluminum and Ergal
materials. The result of all these investments, developments and efforts are evident in the riding performance of the
Gipiemme products. The Gipiemme goal is to provide wheel sets that have enhanced riding characteristics: extremely
reactive to a rider’s efforts, while also providing a comfort factor over the longer rides. SBS Short Braking System:
The revolutionary braking system from Gipiemme. Gipiemme launches its SBS Short Braking System world-wide. The
SBS system greatly reduces stopping distance and guarantees the highest safety on the road. The SBS system is the
result of Gipiemme research to fi nd ways in which to increase the performance of racing wheels, specifi cally in
its stopping performance. SBS is obtained by a very special production method on the rim that is covered by a
worldwide patent. All this is achieved by incorporating special resinous material into the rim during manufac-
ture, which causes a high level of friction under braking and drastically improves effi ciency even when
using standard brake shoes. Importantly with the SBS system rapid speed decrease is safety as the
system does not create a jamming or sticking of the brake pad on the rim. The SBS system
also enhances the braking feel or modulation of the brake level in long descents as it
provides a venting of the heat build up on the rim surface. In wet conditions
the SBS system provides an immediate water dispersal function that
guarantees a quick and safe brake with a documen-
ted increased in stopping power.
San Marino presentazione Professional Team ALFA LUM. Anni 80
FINAUTO Team 2006
Professional MTB Team OLYMPIA.
Gilberto Simoni
Professional Team FALCON. Anni 70.
Nazionale Ukraina, campionati del mondo 1992 Campionati Stayer. Anni 70.
Giovanni Bernardi e Gino Bartali. Anni 50 Cronometro Femminile 2000 Dimitri Konychev Tullio Campagnolo - Fausto Coppi - Giovanni Bernardi Giuliano Figueras campione del mondo
Giuseppe PetitoVittorio e Giovanni Bernardi - Costante Girardegno (al centro). Anni 50 Professional Team 2005/2006 FORNO D’ASOLO
Gianni Bugno campione del mondo 1991/1992
Francesco Moser - record velocità 1985
Montecarlo 1994 Profesional Team AKI - Gipiemme
Giovanni Battaglin
La nostra storia / Our history
6 7
CARBONLENTICOLAREStrada-Road / Pista-Track
TIPO: Tubolare 28” - Etrto 632 VERSIONI: Post. SH. - Camp. O.L.D. 130 mm. Post. Pista O.L.D. 120 mm. Anteriore O.L.D. 100 mm. PESO: Ant. 1200 g. - Post. SH. - Camp. 1390 g.(± 5% senza bloccaggi) Post. Pista 1350 g. (± 5% con dadi)CERCHIO: 100% fi bra carbonio Foro valvola Ø 6,5 mm.MOZZI: In alluminio con cuscinetti fi nitura nerocassetta in ergal con cuscinettiBLOCCAGGI: In alluminio forgiato peso 116 g.
TYPE: Tubular 28” – Etrto 632VERSIONS: Rear wheel. SH. - Camp. O.L.D. 130 mm.Rear wheel. Track O.L.D. 120 mm. Front O.L.D. 100 mm.WEIGHT: Front 1200 g. - Rear. SH.- Camp. 1390 g. (± 5% without quick release) Rear. Track 1350 g. (± 5% With nuts)RIM: 100% carbon fi ber Valve hole Ø 6,5 mm.
HUB: Forged aluminium on seal ball bearings Forged ergal Cassette body on seal ball bearings
Q.R.: Forged alluminium weight 116 g.
CARBON 5.5 SBSStrada-Road
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SHIM – Camp. - O.L.D. 100/130 mm.
PESO STD: SILVER - Ant. 880 g. - Post. 1050 g. - Tot.1930 g.NERO - Ant. 940 g. - Post. 1110 g. - Tot. 2050 g.
(± 5% senza bloccaggi)PESO LIGHT: SILVER - Ant. 827 g. - Post. 970 g. - Tot.1797 g.
NERO - Ant. 887 g. - Post. 1030 g. - Tot. 1917 g.(± 5% senza bloccaggi)
CERCHI: Profi lo saldato alto 55 mm. - Carbonio e Alluminio 6082 T6CNC e fori CNC - Foro valvola Ø 6,5 mm
RAGGI: Inox aero - Ant. n.20 radiali - Post. n.20 radiali lato sx e inc.x1 dxNIPPLES: S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti cassetta ergal con cuscinettiBLOCCAGGI: In Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SHIM. - Camp. - O.L.D. 100/130 mmWEIGHT STD: SILVER - Front. 880 g. - Rear. 1050 g. - Set 1930 g. BLACK Front. 940 g. - Rear. 1110 g. - Set 2050 g.(± 5% without quick release)WEIGHT LIGHT: SILVER - Front. 887 g. - Rear. 1030 g. - Set 1917 g. BLACK Front. 827 g. - Rear. 970 g. - Set 1797 g.(± 5% without quick release)RIM: Welded high profi le 55 mm. - Carbon and Aluminium 6082 T6CNC and holes CNC - Valve hole Ø 6,5 mm.SPOKES: Inox aero - Front. n.20 radiali - Rear. n.20 radial side left crossing.x1 rightNIPPLES: S.I.L.S. Nickel-plated material with washer
HUB: Forged aluminium on seal ball bearings black fi nishing -Forged ergal Cassette body on seal ball bearings
Q.R.: Forged aluminium - weight 116 g.
������
SBSPATENT
Copertoncino 28” – 700C – Etrto 622
SILVER - Ant. 880 g. - Post. 1050 g. - Tot.1930 g.
PATENTPATENT
OPTIONAL LIGHT
Track
(± 5% without quick release) Rear. Track 1350 g. (± 5% With nuts)
Forged aluminium on seal ball bearings Forged ergal Cassette
CARBONStrada-Road
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SHIM – Camp. - O.L.D. 100/130 mm.
PESO STD: SILVER - Ant. 880 g. - Post. 1050 g. - Tot.1930 g.NERO - Ant. 940 g. - Post. 1110 g. - Tot. 2050 g.
(± 5% senza bloccaggi)PESO LIGHT: SILVER - Ant. 827 g. - Post. 970 g. - Tot.1797 g.
NERO - Ant. 887 g. - Post. 1030 g. - Tot. 1917 g.(± 5% senza bloccaggi)
CERCHI: Profi lo saldato alto 55 mm. - Carbonio e Alluminio 6082 T6CNC e fori CNC - Foro valvola Ø 6,5 mm
RAGGI: Inox aero - Ant. n.20 radiali - Post. n.20 radiali lato sx e inc.x1 dxNIPPLES: S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti cassetta ergal con cuscinettiBLOCCAGGI: In Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SHIM. - Camp. - O.L.D. 100/130 mmWEIGHT STD: SILVER - Front. 880 g. - Rear. 1050 g. - Set 1930 g. BLACK Front. 940 g. - Rear. 1110 g. - Set 2050 g.(± 5% without quick release)WEIGHT LIGHT: SILVER - Front. 887 g. - Rear. 1030 g. - Set 1917 g. BLACK Front. 827 g. - Rear. 970 g. - Set 1797 g.(± 5% without quick release)RIM: Welded high profi le 55 mm. - Carbon and Aluminium 6082 T6CNC and holes CNC - Valve hole Ø 6,5 mm.SPOKES: Inox aero - Front. n.20 radiali - Rear. n.20 radial side left crossing.x1 rightNIPPLES: S.I.L.S. Nickel-plated material with washer
HUB: Forged aluminium on seal ball bearings black fi nishing -Forged ergal Cassette body on seal ball bearings
Q.R.: Forged aluminium - weight 116 g.
������
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheelsFibra di carbonioCarbon fi bre
Fibra di alluminioAluminium fi bre
Fibra di carbonioCarbon fi bre
8 9
CARBON H4.0Pista-Track
CARBON H4.0Strada-Road
OPTIONAL LIGHT
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheels
TIPO: Tubolare 28” – 700C – Etrto 632VERSIONI: SHIM. – Camp. - O.L.D. 100/130 mm.
PESO STD: Ant. 803 g. - Post. 973 g. - Tot. 1773 g.(± 5% senza bloccaggi)PESO LIGHT: Ant. 750 g. - Post. 893 g. - Tot. 1643 g.(± 5% senza bloccaggi)CERCHI: Profi lo alto 40,5 mm. - Carbonio 100% monoscoccaForo valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n. 20/20 inc. x1 NIPPLES: AcciaioMOZZI: Alluminio forgiato a cuscinetti cassetta ergal con cuscinettiBLOCCAGGI: In Alluminio forgiato - peso 116 g.
TYPE: Tubular 28” – 700C – Etrto 632VERSIONS: SHIMI. – Camp. - O.L.D. 100/130 mm.WEIGHT STD: Front. 803 g. - Rear. 973 g. - Set 1773 g. (± 5% without quick release)WEIGHT LIGHT: Front 750 g. - Rear 893 g. - Set 1643 g.
(± 5% without quick release)RIM: High profi le 40,5 mm. - Carbon 100% monocoque
Valve hole Ø 6,5 mm.SPOKES: Inox aero - Front/Rear n. 20/20 cross. x1
NIPPLES: SteelHUB: Forged aluminium on seal ball bearings
Ergal seal ball bearings cassetteQ.R.: Forged aluminium - weight 116 g.
TIPO: Tubolare 28” – 700C – Etrto 632VERSIONI: PISTA - O.L.D. 100/120 mm.
PESO: Ant. 870 g. - Post. 930 g. - Tot. 1800 g. (± 5%)CERCHI: Profi lo alto 40,5 mm. - Carbonio 100% monoscocca
Foro valvola Ø 6,5 mm.RAGGI: Inox - Ant./Post. n. 20/20 inc. x1
NIPPLES: AcciaioMOZZI: Alluminio forgiato a cuscinetti
TYPE: Tubular 28” – 700C – Etrto 632VERSIONS: TRACK - O.L.D. 100/120 mm.WEIGHT: Front 870 g. - Rear 930 g. - Set 1800 g. (± 5%)RIM: High profi le 40,5 mm. - Carbon 100% monocoque Valve hole Ø 6,5 mm.SPOKES: Inox - Front/Rear n. 20/20 cross. x1NIPPLES: SteelHUB: Forged aluminium on seal ball bearings
Fibra di carbonioCarbon fi bre
Fibra di carbonioCarbon fi bre
10 11
GRECALPARADEStrada-Road
CARBONMETEORAStrada-Road
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. – Camp. - O.L.D. 100/130 mm.
PESO STD: Ant. 930 g. - Post. 995 g. - Tot. 1925 g. (± 5% senza bloccaggi)PESO LIGHT: Ant. 877 g. - Post. 915 g. - Tot. 1792 g. (± 5% senza bloccaggi)CERCHI: Profi lo alto 24,5 mm. - Carbonio 100% monoscoccaForo valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n.20/20 inc. x1 NIPPLES: ABS in Ottone nichelato con rondellaMOZZI: Alluminio a cuscinetti - cassetta ergal con cuscinettiBLOCCAGGI: In Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. – Camp. - O.L.D. 100/130 mm.WEIGHT STD: Front. 930 g. - Rear. 995 g. - Set 1925 g.(± 5% without quick release)WEIGHT LIGHT: Front 877 g. - Rear 915 g. - Set 1792 g.(± 5% without quick release)RIM: Profi le 24,5 mm. - Carbon 100% monocoque
Valve hole Ø 6,5 mm.SPOKES: Inox aero. Front/Rear n.20/20 cross. x1
NIPPLES: ABS Nickel-plated brass with washerHUB: Forged aluminium on seal ball bearings – Ergal seal ball bearings
Q.R.: Forged aluminium - weight 116 g.
Strada-
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.
PESO: NERO - Ant. 890 g. - Post. 1060 g. - Tot. 1950 g. - (± 5% senza bloccaggi)PESO: SILVER - Ant. 930 g. - Post. 1100 g. - Tot. 2030 g. - (± 5% senza bloccaggi)
CERCHI: Profi lo alto 40,5/28 mm. - Alluminio 6082 T6 CNC e fori CNCForo valvola Ø 6,5 mm.
RAGGI: Inox aero - Ant./Post. n.16/16 appaiati ( T2 ) inc. x1 NIPPLES: Autobloccanti speciali L25 - S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti - cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: BLACK - Front. 890 g. - Rear. 1060 g. - Set 1950 g.(± 5% without quick release)WEIGHT: SILVER - Front 930 g. - Rear 1100 g. - Set 2030 g.(± 5% without quick release)RIM: High profi le 40,5/28 mm. - Aluminium 6082 T6 CNC and holes CNCValve hole Ø 6,5 mmSPOKES: Inox aero - Front/Rear n.16/16 paired ( T2 ) cross. x1NIPPLES: Special autolock L25 - S.I.L.S. nickel-plated brass with washerHUB: Forged aluminium on seal ball bearings – Ergal seal ball bearingsQ.R.: Forged aluminium - weight 116 g.
24,5
19.513
PATENT
METEORAOPTIONAL LIGHT
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheelsNero Anodizzato marcato laserAnodized Black laser print
Argento BrillanteSilver Bright
Fibra di carbonioCarbon fi bre
12 13
TECNO1.55Strada-Road
GRECALPHOENIXStrada-Road
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.
PESO STD: SILVER - Ant. 940 g. - Post. 1110 g. - Tot. 2050 g.(± 5% senza bloccaggi)NERA - Ant. 900 g. - Post. 1070 g. - Tot. 1970 g.(± 5% senza bloccaggi)PESO LIGHT: NERA - Ant. 847 g. - Post. 990 g. - Tot. 1837 g.(± 5% senza bloccaggi)CERCHI: Profi lo alto 40,5/28 mm. - Alluminio 6082 T6 CNC e fori CNC- Foro valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n.20/20 inc. x1 NIPPLES: Autobloccanti speciali L25 - S.I.L.S.in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti- cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.
WEIGHT STD: SILVER - Front 940 g. - Rear 1110 g. - Set 2050 g. (± 5% without quick release)
BLACK - Front 900 g. - Rear 1070 g. - Set 1970 g. (± 5% without quick release)
WEIGHT LIGHT: BLACK - Front 847 g. - Rear 990 g. - Set 1837 g. (± 5% without quick release)
RIM: High profi le 40,5/28 mm. - Aluminium 6082 T6 CNC and holes CNC - Valve hole Ø 6,5 mm.
SPOKES: Inox aero - Front/Rear n.20/20 paired ( T2 ) cross. x1NIPPLES: Special autolock L25 - S.I.L.S. nickel-plated brass with washer
HUB: Forged aluminium on seal ball bearings – Ergal seal ball bearingsQ.R.: Forged aluminium - weight 116 g.
30.5
18
13.5
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.
PESO STD: NERA - Ant. 736 g. - Post. 950 g. - Tot. 1686 g. (± 5% senza bloccaggi)SILVER - Ant. 776 g. - Post. 990 g. - Tot. 1726 g. (± 5% senza bloccaggi)
PESO LIGHT: NERA - Ant. 683 g. - Post. 870 g. - Tot. 1553 g.(± 5% senza bloccaggi)CERCHI: Profi lo saldato alto 30,5 mm. - Alluminio 6082 T6 fori CNC
- Foro valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n.20/20NIPPLES: Autobloccanti S.I.L.S. ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti - cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT STD: BLACK - Front. 736 g. - Rear. 950 g. - Set 1686 g.(± 5% without quick release)SILVER - Front. 776 g. - Rear. 990 g. - Set 1726 g.(± 5% without quick release)WEIGHT LIGHT: BLACK - Front 683 g. - Rear 870 g. - Set 1553 g.(± 5% without quick release)RIM: Welded high profi le 30,5 mm. - Aluminium 6082 T6 CNC holes- Valve hole Ø 6,5 mm.SPOKES: Inox aero - Front/Rear n.20/20NIPPLES: S.I.L.S. nikel-plated brass autolock with washer
HUB: Forged aluminium on seal ball bearingsErgal seal ball bearings cassette
Q.R.: Forged aluminium - weight 116 g.
PHOENIXPATENT
Copertoncino 28” – 700C – Etrto 622
PATENTPATENT
OPTIONAL LIGHTOPTIONAL LIGHT
Argento BrillanteSilver Bright
Nero Anodizzato marcato laser Anodized Black laser print
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheels
Argento BrillanteSilver Bright
Nero Anodizzato marcato laser Anodized Black laser print
14 15
TECNO1.55 CICLOCROSS DISC
TECNO1.55Pista-Track
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: Pista - O.L.D. 100/120 mm.PESO: Ant. 1000 g. - Post. 1054 g. - Tot. 2056 g. (± 5%)CERCHI: Profi lo saldato alto 30,5 mm. - Alluminio 6082 T6 fori CNCForo valvola Ø 6,5 mm.RAGGI: Inox - Ant. n.32 radiali - Post.a n. 32 inc. x3NIPPLES: Autobloccanti S.I.L.S. ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: Track - O.L.D. 100/120 mm.WEIGHT: - Front 1000 g. - Rear 1054 g. - Set 2056 g.(± 5% without quick release)RIM: Welded high profi le 30,5 mm. - Aluminium 6082 T6 CNC holes- Valve hole Ø 6,5 mm.SPOKES: Inox - Front 32 radiali - Rear n. 32 cross. x3NIPPLES: S.I.S.L.S. Nikelplated brass autobloock washerHUB: Forged aluminium on seal ball bearings
30.5
18
13.5
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.
PESO: Ant. 880 g. - Post. 1060 g. - Tot. 1940 g. (± 5% senza bloccaggi)CERCHI: Profi lo saldato alto 30,5 mm. - Alluminio 6082 T6 fori CNC
Foro valvola Ø 6,5 mm.RAGGI: Inox aero - n.20/20
NIPPLES: Autobloccanti S.I.L.S. ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti - cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: Front 880 g. - Rear 1060 g. - Set 1940 g.(± 5% without quick release)RIM: Welded high profi le 30,5 mm. - Aluminium 6082 T6 CNC holesValve hole Ø 6,5 mm.SPOKES: Inox aero - Rear n.20/20NIPPLES: S.I.S.L.S. Nikelplated brass autolock washerHUB: Forged aluminium on seal ball bearingsQ.R.: Forged aluminium - weight 116 g.
30.5
18
13.5
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheelsNero Anodizzato marcato laser Anodized Black laser print
Nero Anodizzato marcato laser Anodized Black laser print
16 17
TECNO716Strada-Road TECNO716
Pista-Track TIPO: Tubolare 28” – 700C – Etrto 632
VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.PESO: NERA 28”- Ant. 838 g. - Post. 1022 g. - Tot. 1860 g.(± 5% s. bloccaggi)PESO: SILVER 28”- Ant. 878 g. - Post. 1062 g. - Tot. 1940 g.(± 5% s. bloccaggi)CERCHI: Profi lo saldato alto 40,5 - Alluminio 6082 T6 fori CNC- Foro valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n.16/16 NIPPLES: Autobloccanti speciali L25 - S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Tubular 28” – 700C – Etrto 632VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: BLACK 28”- Front 838 g. - Rear 1022 g. - Set 1860 g.
(± 5% without quick release)WEIGHT: SILVER 28”- Front 878 g. - Rear 1062 g. - Set 1940 g.
(± 5% without quick release)RIM: Welded high profi le 40,5 mm. - Aluminium 6082 T6 CNC holes
- Valve hole Ø 6,5 mm.SPOKES: Inox aero - Front/Rear n.16/16
NIPPLES: Special autolock L25 - S.I.L.S. nickel-plated brass with washerHUB: Forged aluminium on seal ball bearings – Ergal seal ball bearings cassette
Q.R.: Forged aluminium - weight 116 g.
TIPO: Tubolare 28” – 700C – Etrto 632 VERSIONI: Pista - O.L.D. 100/120 mm.
PESO: NERA 28”- Ant. 1098 g. - Post. 1150 g. - Tot. 2248 g. (± 5% s. bloccaggi)SILVER 28”- Ant. 1138 g. - Post. 1190 g. - Tot. 2288 g. (± 5% s. bloccaggi)
CERCHI: Profi lo saldato alto 40,5 - Alluminio 6082 T6 fori CNC - Foro valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. a n.32/32
NIPPLES: Autobloccanti speciali L25 - S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti
TYPE: Tubular 28” – 700C – Etrto 632VERSIONS: Track - O.L.D. 100/120 mm.WEIGHT: BLACK 28”- Front 1098 g. - Rear 1150 g. - Set 2248 g. (± 5% without quick release)SILVER 28”- Front 1138 g. - Rear 1190 g. - Set 2288 g. (± 5% without quick release)RIM: Welded high profi le 40,5 - Aluminium 6082 T6 - Valve hole Ø 6,5 mm.SPOKES: Inox aero - Front/Rear n.32/32 NIPPLES: Special autolock L25 - S.I.L.S. nickel-plated brass with washerHUB: Forged aluminium on seal ball bearings
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheels
Argento BrillanteSilver Bright
Nero Anodizzato marcato laser Anodized Black laser print
Argento BrillanteSilver Bright
Nero Anodizzato marcato laser Anodized Black laser print
18 19
TIPO: Copertoncino 26” – 650C - Etrto 571 Copertoncino 28” – 700C - Etrto 622 VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.PESO: NERA 26”- Ant. 910 g. - Post. 1080 g. - Tot. 1990 g. - (± 5% s. bloccaggi)PESO: SILVER 28”- Ant. 1050 g. - Post. 1220 g. - Tot. 2270 g. - (± 5% s. bloccaggi)NERA 28”- Ant. 1010 g. - Post. 1180 g. - Tot. 2190 g. - (± 5% s. bloccaggi)CERCHI: Profi lo alto 40,5 - Alluminio 6082 T6 fori CNC - Foro valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n.16/16 appaiati ( T2 ) inc. x1 NIPPLES: Autobloccanti speciali L25 - S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti - cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 26” – 650C- Etrto 571 Clincher 28” – 700C - Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: BLACK 26” - Front 910 g. - Rear 1080 g. - Set 1990 g.
(± 5% without quick release) WEIGHT: SILVER 28” - Front 1050 g. - Rear 1220 g. - Set 2270 g.
(± 5% without quick release) BLACK 28” - Front 1010 g. - Rear 1180 g. - Set 2190 g.
(± 5% without quick release) RIM: Welded high profi le 40,5 - Aluminium 6082 T6 CNC holes - Valve hole Ø 6,5 mm.
SPOKES: Inox aero - Front/Rear n.16/16 paired ( T2 ) cross. x1NIPPLES: Special autolock L25 - S.I.L.S. nickel-plated brass with washer
HUB: Forged aluminium on seal ball bearings – Ergal seal ball bearings cassetteQ.R.: Forged aluminium - weight 116 g.
13.5
19
30
TIPO:Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.
PESO: Ant. 980 g. - Post. 1150 g. - Tot. 2130 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 30 mm. - Alluminio 6005 T6 vernic. nero
Foro valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n.24/24speciale raggiatura a terne ( T3 ) NIPPLES: Autobloccanti S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti - cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: Front 980 g. - Rear 1150 g. - Set 2130 g.(± 5% without quick release)RIM: High profi le 30 mm. - Aluminium 6005 T6 - Valve hole Ø 6,5 mmSPOKES: Inox aero - Front/Rear n.24/24 Three parallel ( T3 )NIPPLES: S.I.L.S. Nickel-plated brass autolock with washerHUB: Forged aluminium on seal ball bearings - Ergal seal ball bearings cassetteQ.R.: Forged aluminium - weight 116 g.
TECNO716 TWINStrada-Road TECNO324
Strada-Road
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheels
Argento BrillanteSilver Bright
Nero Anodizzato marcato laser Anodized Black laser print
Nero VerniciatoBlack Painted
Argento VerniciatoSilver Painted
20 21
TECNO 032Strada-Road
TECNO 024/30Strada-Road
2014
18
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.PESO: Ant. 980 g. - Post. 1150 g. - Tot. 2130 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 30 mm. - Alluminio 6005 T6 - Foro valvola Ø 6,5 mm.RAGGI: Inox aero - Ant./Post. n.24/24 speciale raggiatura ( T2 )NIPPLES: Autobloccanti S.I.L.S. in Ottone nichelato con rondellaMOZZI: Alluminio forgiato a cuscinetti - cassetta in ergal con cuscinettiBLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: Front 980 g. - Rear 1150 g. - Set 2130 g.(± 5% without quick release)RIM: High profi le 30 mm. - Aluminium 6005 T6 - Valve hole Ø 6,5 mmSPOKES: Inox aero - Front/Rear n.24/24 Three parallel ( T2 )NIPPLES: S.I.L.S. Nickel-plated brass autolock with washerHUB: Forged aluminium on seal ball bearingsErgal seal ball bearings cassette
Q.R.: Forged aluminium - weight 116 g.
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SH. - Camp. - O.L.D. 100/130 mm.
PESO: Ant. 865 g. - Post. 1050 g. - Tot. 1915 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 18 mm. - Alluminio 6005 T6
Foro valvola Ø 6,5 mm con occhielli.RAGGI: Inox - Ant./Post. n.32/32
NIPPLES: Autobloccanti S.I.L.S. in Ottone nichelatoMOZZI: Alluminio forgiato a cuscinetti - cassetta in ergal con cuscinetti
BLOCCAGGI: Alluminio forgiato - peso 116 g.
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: Front 865 g. - Rear 1150 g. - Set 1915 g.(± 5% without quick release)RIM: High profi le 18 mm. - Aluminium 6005 T6- Valve hole Ø 6,5 mm with eyeletsSPOKES: Inox - Front/Rear n.32/32NIPPLES: S.I.L.S. Nickel-plated brass autolock with washerHUB: Forged aluminium on seal ball bearings Ergal seal ball bearings cassetteQ.R.: Forged aluminium - weight 116 g.
13.5
19
30
RuoteCorsaRacingWheelsRuoteCorsaRacingWheels RuoteCorsaRacingWheelsRuoteCorsaRacingWheelsNero VerniciatoBlack Painted
Argento VerniciatoSilver Painted
Nero AnodizzatoAnodized Black
TIPO: Copertoncino 26” MTB – Etrto 559VERSIONI: SHIM. O.L.D. 100/135 mm.
PESO: Ant. 799 g. - Post. 1050 g. - Tot. 1849 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 20 mm saldato - Alluminio 6082 T6con occhiello - Foro valvola Ø 8,5 mm.RAGGI: Inox - Ant./Post. n.28/28NIPPLES: Autobloccanti S.I.L.S. in Ottone nichelatoMOZZI: Alluminio forgiato per freni a disco standard e center lockBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 26” MTB – Etrto 559VERSIONS: SHIM. O.L.D. 100/135 mm.WEIGHT: Front 799 g. - Rear 1050 g. - Set 1849 g.(± 5% without quick release)RIM: Welded high profi le 20 mm. - Aluminium 6082 T6Valve hole Ø 6,5 mm whit eyeletsSPOKES: Inox - Front/Rear n.28/28NIPPLES: S.I.L.S. Nickel-plated brass autolock with washer
HUB: Forged aluminium on seal ball bearings for disc brakestandard and center lock
Q.R.: Forged aluminium
TIPO: Copertoncino 26” MTB – Etrto 559VERSIONI: SHIM. O.L.D. 100/135 mm.
PESO: Ant. 830 g. - Post. 1110 g. - Tot. 1940 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 20 mm - Alluminio 6005 T6
con occhiello - Foro valvola Ø 8,5 mm.RAGGI: Inox - Ant./Post. n.28/28
NIPPLES: Autobloccanti S.I.L.S. in Ottone nichelatoMOZZI: Alluminio forgiato a cuscinettiBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 26” MTB – Etrto 559VERSIONS: SHIM. O.L.D. 100/135 mm.WEIGHT: Front 830 g. - Rear 1110 g. - Set 1940 g.(± 5% without quick release)RIM: Profi le 20 mm. - Aluminium 6005 T6Valve hole Ø 6,5 mm with eyeletsSPOKES: Inox - Front/Rear n.28/28NIPPLES: S.I.L.S. Nickel-plated brass autoloock with washerHUB: Forged aluminium on seal ball bearings Q.R.: Forged aluminium
22 23
MX-TREMEMTB
KENYA MTBProfessional DiscCenter Lock
RuoteMTBWheelsMTBRuoteMTBWheelsMTBRuoteMTB WheelsMTBRuoteMTBWheelsMTBRuoteMTBWheel-
TIPO:VERSIONI:
KENYA Professional DiscCenter Lock
TIPO: Copertoncino 26” MTB – Etrto 559VERSIONI:
PESO: Ant. 830 g. - Post. 1110 g. - Tot. 1940 g. - (± 5% senza bloccaggi)CERCHI:
con occhiello - Foro valvola Ø 8,5 mm.RAGGI:
NIPPLES:MOZZI:
MTB
24,5
18
20
Nero Anodizzato marcato laser Anodized Black laser print
Nero Anodizzato marcato laser Anodized Black laser print
Professional DiscCenter Lock
OPTIONAL TUBELESS TREMEOPTIONAL CENTER LOCK
Copertoncino 26” MTB – Etrto 559
OPTIONAL CENTER LOCKOPTIONAL CENTER LOCKOPTIONAL CENTER LOCK
OPTIONAL TUBELESS
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SHIM. - Camp. - O.L.D. 100/130 mm.
PESO: Ant. 995 g. - Post. 1255 g. - Tot. 2250 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 30 mm. - Alluminio 6005 T6
Foro valvola Ø 6,5 mm.RAGGI: Ant./Post. n.24/24
NIPPLES: Standard con rondellaMOZZI: Alluminio forgiatoBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: Front 995 g. - Rear 1255 g. - Set 2250 g.(± 5% without quick release)RIM: High profi le 30 mm. - Aluminium 6005 T6Valve hole Ø 6,5 mm.SPOKES: Front/Rear n.24/24NIPPLES: Standard with washerHUB: Forged aluminium Q.R.: Forged aluminium
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SHIM. - Camp. - O.L.D. 100/130 mm.PESO: Ant. 1154 g. - Post. 1285 g. - Tot. 2439 g. - (± 5% senza bloccaggi)
CERCHI: Profi lo alto 40 mm. - Alluminio 6005 T6Foro valvola Ø 6,5 mm.RAGGI: Ant./Post. n.24/24NIPPLES: Standard con rondellaMOZZI: Alluminio forgiatoBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 28” – 700C – Etrto 622VERSIONS: SH. - Camp. - O.L.D. 100/130 mm.WEIGHT: Front 1154 g. - Rear 1285 g. - Set 2439 g.(± 5% without quick release)RIM: High profi le 40 mm. - Aluminium 6005 T6Valve hole Ø 6,5 mm.SPOKES: Front/Rear n.24/24
NIPPLES: Standard with washerHUB: Forged aluminium
Q.R.: Forged aluminium
27
T3 30SStrada-Road
RacingCTBCorsaCTBRacingCTBCorsaCTBRacingCTB CorsaCTBRacingCTBCorsaCTBRacingCTBCorsaCTB
TIPO: Copertoncino 28” – 700C – Etrto 622VERSIONI: SHIM. - Camp. - O.L.D. 100/130 mm.
PESO: Ant. 995 g. - Post. 1255 g. - Tot. 2250 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 30 mm. - Alluminio 6005 T6
Foro valvola Ø 6,5 mm.RAGGI:
NIPPLES: MOZZI:BLOCCAGGI:
26
T3 40SStrada-Road
TIPO:VERSIONI:PESO:
CERCHI:Foro valvola Ø 6,5 mm.RAGGI:NIPPLES:
Q.R.:
T3 40SStrada-
Silver VerniciatoSilver Painted
Nero VerniciatoBlack Painted
Silver VerniciatoSilver Painted
Nero VerniciatoBlack Painted
13.5
19
30
TIPO: Copertoncino 26”MTB – Etrto 559VERSIONI: SHIM. - SHIM. disk - fi letto - O.L.D. 100/135 mm.
PESO: V-BRAKE - Ant. 872 g. - Post. 991 g. - Cassetta 1130 g.DISK - Ant. 990 g. - Post. 1195 g. - (± 5% senza bloccaggi)
CERCHI: Profi lo alto 24 mm. - Alluminio - Foro valvola Ø 8,5 mm.RAGGI: Ant./Post. n.24/24 T2
NIPPLES: StandardMOZZI: Alluminio forgiato su sfereBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 26” MTB – Etrto 559VERSIONS: SHIM. - SHIM. disk - free wheel - O.L.D. 100/135 mm.WEIGHT: W-BRAKE - Front 872 g. - Rear F.W. 991 g. - Rear Cassette 1130 g.DISK - Front 990 g. - Rear 1195 g. - (± 5% without quick release)RIM: High profi le 24 mm. - Aluminium - Valve hole Ø 6,5 mm.SPOKES: Front/Rear n.24/24 T2NIPPLES: Standard HUB: Forged aluminium - lose ballQ.R.: Forged aluminium
TIPO: Copertoncino 26”MTB – Etrto 559VERSIONI: SHIM. - SHIM. disk - fi letto - O.L.D. 100/135 mm.PESO: V-BRAKE - Ant. 962 g. - Post. Filetto 1089 g. - Cassetta 1220 g.
DISK - Ant. 980 g. - Post. 1185 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 30 mm. - Alluminio - Foro valvola Ø 8,5 mm.RAGGI: Ant./Post. n.24/24 T2NIPPLES: StandardMOZZI: Alluminio forgiato su sfereBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 26” MTB – Etrto 559VERSIONS: SHIM. - SHIM. disk - free wheel - O.L.D. 100/135 mm.WEIGHT: W-BRAKE - Front 962 g. - Rear F.W. 1089 g. - Rear Cassette 1220 g.DISK - Front 980 g. - Rear 1185 g. (± 5% without quick release)RIM: High profi le 30 mm. - Aluminium - Valve hole Ø 6,5 mm.SPOKES: Front/Rear n. 24/24 T2NIPPLES: Standard HUB: Forged aluminium - lose ball
Q.R.: Forged aluminium
28
T2 24LMTB
TIPO: Copertoncino 26”MTB – Etrto 559VERSIONI: SHIM. - SHIM. disk - fi letto - O.L.D. 100/135 mm.
PESO: V-BRAKE - Ant. 872 g. - Post. 991 g. - Cassetta 1130 g.DISK - Ant. 990 g. - Post. 1195 g. - (± 5% senza bloccaggi)
CERCHI:RAGGI:
NIPPLES:MOZZI:BLOCCAGGI:
28 29
RuoteNisiWheelsNisiRuoteNisiWheelsNisiRuoteNisi WheelRuoteNisiWheelsNisiRuoteNisiWheelsNisiRuoteNi-
T2 30LMTB
TIPO: VERSIONI:PESO:
24
19.5
26 Silver VerniciatoSilver Painted
Nero VerniciatoBlack Painted
30
23,2
16,5Silver VerniciatoSilver Painted
Nero VerniciatoBlack Painted
TIPO: Copertoncino 28”TRK – Etrto 622VERSIONI: SHIM. - fi letto - O.L.D. 100/135 mm.
PESO: Ant. 932 g. - Post. Filetto 1051 g.Post. Cassetta 1190 g. - (± 5% senza bloccaggi)
CERCHI: Profi lo alto 24 mm. - Alluminio - Foro valvola Ø 8,5 mm.RAGGI: Ant./Post. n.24/24 T2NIPPLES: Standard
MOZZI: Alluminio forgiato su sfereBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 28” TRK – Etrto 622VERSIONS: SHIM. - free wheel - O.L.D. 100/135 mm.WEIGHT: Front 932 g. - Rear F.W. 1051 g. Rear Cassette 1190 g. (± 5% without quick release)RIM: High profi le 24 mm. - Aluminium - Valve hole Ø 6,5 mm.SPOKES: Front/Rear n.24/24 T2NIPPLES: Standard HUB: Forged aluminium - lose ballQ.R.: Forged aluminium
TIPO: Copertoncino 28”TRK – Etrto 622VERSIONI: SHIM. - fi letto - O.L.D. 100/135 mm.PESO: Ant. 1022 g. - Post. Filetto 1141 g.
Post. Cassetta 1280 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 30 mm. - Alluminio - Foro valvola Ø 8,5 mm.RAGGI: Ant./Post. n.24/24 T2NIPPLES: StandardMOZZI: Alluminio forgiato su sfereBLOCCAGGI: Alluminio forgiato
TYPE: Clincher 28” TRK – Etrto 622VERSIONS: SHIM. - free wheel - O.L.D. 100/135 mm.WEIGHT: Front 1022 g. - Rear F.W.1141 g. Rear Cassette 1280 g. - ( ± 5% without quick release)RIM: High profi le30 mm. - Aluminium - Valve hole Ø 6,5 mm.SPOKES: Front/Rear n.24/24 T2NIPPLES: Standard HUB: Forged aluminium
Q.R.: Forged aluminium
30
T2 24LTREKKING
TIPO: Copertoncino 28”TRK – Etrto 622VERSIONI:
PESO: Ant. 932 g. - Post. Filetto 1051 g.Post. Cassetta 1190 g. - (± 5% senza bloccaggi)
CERCHI:RAGGI:NIPPLES:
MOZZI:BLOCCAGGI:
30 31
T2 30LTREKKING
TIPO: VERSIONI:PESO:
Post. Cassetta 1280 g. - (± 5% senza bloccaggi)CERCHI:
T2 30LTREKKING
RuoteNisiWheelsNisiRuoteNisiWheelsNisiRuoteNisi WheelRuoteNisiWheelsNisiRuoteNisiWheelsNisiRuoteNi-
Silver VerniciatoSilver Painted
Nero VerniciatoBlack Painted
24
19.5
26
30
23,2
16,5Silver VerniciatoSilver Painted
Nero VerniciatoBlack Painted
RuoteNisiWheelsNisiRuoteNisiWheelsNisiRuoteNisi
CERCHI RIMS
3232
TIPO: Copertoncino 28”TRK – Etrto 622VERSIONI: SHIM. - O.L.D. 100/135 mm.
PESO: Ant. 1090 g. - Post. 1304 g. - (± 5% senza bloccaggi)CERCHI: Profi lo alto 30 mm. - Alluminio - CNC - Foro valvola Ø 8,5 mm.
RAGGI: Ant./Post. n.28 T4NIPPLES: StandardMOZZI: Alluminio forgiato su sfere
BLOCCAGGI: Alluminio forgiato
TYPE: Clincher 28” TRK – Etrto 622VERSIONS: SHIM. - O.L.D. 100/135 mm.WEIGHT: Front 1090 g. - Rear 1304 g. - (± 5% without quick release)RIM: High profi le 30 mm. - Aluminium - CNC - Valve hole Ø 8,5 mm.SPOKES: Front/Rear n.28 T4NIPPLES: Standard HUB: Forged aluminium - lose ballQ.R.: Forged aluminium
Silver VerniciatoSilver Painted
Nero VerniciatoBlack Painted
TT QUATTROTREKKING
��
����
��
����
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 28” - Etrto 622MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:24 (12x2 STD.) - 28 - 32 - 36
COPERTONCINO / CLINCHERDIMENSIONI / SIZE:28” - Etrto 622MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:24 (12x2; 8x3 STD.)28 (4x7 STD.) 28 - 32
COPERTONCINOCLINCHERDIMENSIONI / SIZE: 28” - Etrto 622 26” - Etrto 571MATERIALEMATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:16 (8x2 STD.)- 16 - 28 - 32
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 28” - Etrto 622MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES: 28 - 32 - 36con o senza boccole 28 - 32 - 36 with or without eyelets
2014
18
TUBOLARE / TUBULARDIMENSIONI / SIZE: 28” - Etrto 632MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES: 16 -20-32
13.5
19
30
Tecno 716Copertoncino
Tecno 716Tubolare
Tecno 30 S
Tecno 024
Tecno 032
13,5
25
19
CerchiCorsaGipiemmeRimsRacingGipiemmeCerchiCorsaGipiemme RimsRacingGipiemmeCerchiCorsaGipiemmeRimRac35
TUBOLARE / TUBULARDIMENSIONI / SIZE: 28”Etrto 632MATERIALE / MATERIAL: Fibra di carbonio /Carbon fi breFORI / HOLES: 20-32
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 28” – Etrto 622MATERIALE / MATERIAL: Lega di alluminio fi bra carbonioAluminium alloy reinforce with carbon fi breFORI / HOLES: 20
COPERTONCINOCLINCHERDIMENSIONI / SIZE: 28” – Etrto 622MATERIALE / MATERIAL: 100% fi bra di carbonio100% carbon fi bre FORI / HOLES: 20 - 28 - 32 - 36
24,5
19.513
��
��
����
�����
������
���
30.5
18
13.5
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 28” - Etrto 622MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES: 20 - 28 - 32
34
CarbonMeteora
CarbonH 5.5
Tecno1.55
CarbonH 4.4
37
24,5
18
20
16,5
40,5
23
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 26” - Etrto 55928” - Etrto 622MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:26“: 32 - 36 28“: 32
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 26” - Etrto 559 / 28” - Etrto 622 MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES: 28 - 32 - 36Con boccole / With eyelets
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 26” - Etrto 559 MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES: 26”: 36
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 26” - Etrto 559 MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES: 28 - 32 - 36 Raktor
Kenya Disc
MX Treme
CR
COPERTONCINO / CLINCHERDIMENSIONI / SIZE: 28” - Etrto 622MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES: (7x4) 28 - (9x4) 36
TT-4-30
24,5
18
20
DIMENSIONI / SIZE: 26” - Etrto 55928” - Etrto 622 MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES:26” - 28 - 32 - 3628” - 28 - 32 - 36
30
23,2
16,5
DIMENSIONI / SIZE: 26” - Etrto 55928” - Etrto 622 MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:26” : 28 (7x4 STD.) - 32 (8x4 STD.) 36 (9x4 STD.) - 32 - 3628” : 28 (7x4 STD.) - 32 (8x4 STD.) 36 (9x4 STD.) - 32 - 36
24
19.5
26
DIMENSIONI / SIZE: 20” - Etrto 406 / 24” - Etrto 50726” - Etrto 559 / 28” - Etrto 622MATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES: 24 - 28 - 32 - 36Thunder
Mount
Zenit
Alpyne
DIMENSIONI / SIZE: 26” - Etrto 55928” - Etrto 622MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES: 36
CerchiMTBGipiemmeRimsMTBGipiemmeCerchiMTB CerchiNisiRimsNisiCerchiNisiRimsNisiCerchiNisiRimsNisi36
CARBON SADDLES25,5
19
18
DIMENSIONI / SIZE: 24” - Etrto 50726” - Etrto 55928” - Etrto 622 MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:24” : 36 26” : 3628” : 36
DIMENSIONI / SIZE: 26” - Etrto 55928” - Etrto 622MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:26“ : 3628“ : 36
DIMENSIONI / SIZE: 26” 1-3/8 - Etrto 590 Olanda 28” - Etrto 622 SportMATERIALE / MATERIAL: Lega di alluminio /Aluminium alloyFORI / HOLES:26” 1-3/8 : 36 Olanda28“ : 36 Sport
DIMENSIONI / SIZE: 20” - Etrto 40624” - Etrto 50726” - Etrto 559MATERIALE / MATERIAL: Lega di alluminioAluminium alloyFORI / HOLES:20“ : 28 - 3624“ : 36 26“ : 36
Ercules
Olanda
MirageHeavy
MirageStandard
15
19,5
26
15
19,5
26
15
19,5
26
CerchiNisiRimsNisiCerchiNisiRimsNisiCerchiNisiRimsNiCerchi38
40
SelleSaddlesSelleSaddlesSelleSaddlesSelleSaddlesSelle SaddlesSelleSaddlesSelleSaddlesSelleSaddlesSelleSadd-
Nero - Scafo neroBlack - With black shell
MATERIALE: LoricaCOVER: Lorica
SCAFO: Fibra di carbonio 100%SHELL: Carbon fi ber 100%
TELAIO: Titanio - ManganeseRAIL: Titanium - Manganese
PESO: Titanio gr.127 - Manganese gr.160WEIGHT: Titanio gr.127 - Manganese gr.160
LARGHEZZA: 130 mmWIDTH: 130 mm
LUNGHEZZA: 265 mmLENGTH: 265 mm
MATERIALE: LoricaCOVER: Lorica
SCAFO: Fibra di carbonio 100%SHELL: Carbon fi ber 100%
TELAIO: Titanio - ManganeseRAIL: Titanium - Manganese
PESO: Titanio gr.127 - Manganese gr.160WEIGHT: itanium gr.127 - Manganese gr.160
LARGHEZZA: 130 mmWIDTH: 130 mm
LUNGHEZZA: 265 mmLENGTH: 265 mm
Cobra nero
Cobra silver
gr.160gr.160
TELAIO: Titanio - ManganeseRAIL: Titanium - Manganese
PESO: Titanio gr.127 - Manganese gr.160
Cobra silver
MATERIALE: LoricaCOVER: Lorica
SCAFO: Fibra di carbonio 100%SHELL: Carbon fi ber 100%
SCAFO: Fibra di carbonio 100%SHELL: Carbon fi ber 100%
CobraCobraMATERIALE: LoricaCOVER: Lorica
Cobra nero
CobraCobra
Nero - Scafo carbonio argentoBlack - With silver carbon shell
41
NeroBlack
Stealth 2000Stealth 2000
MATERIALE: TessutoCOVER: Fabric
SCAFO: Fibra di carbonio 100%SHELL: Carbon fi ber 100%
TELAIO: Titanio RAIL: Titanium
PESO: 147 gr.WEIGHT: 147 gr.
LARGHEZZA: 134 mmWIDTH: 134 mm
LUNGHEZZA: 273 mmLENGTH: 273 mm
ACCESSORI ACCESSORY
SelleSaddlesSelleSaddlesSelleSaddlesSelleSaddlesSelle
Nero con grafi caBlack with graphic
Scafo rinforzato in carbonio rigido ad alte prestazioni
High performance stiffcarbon reinforced shell
G124 max
Dakar
Nero Black
MATERIALE: TessutoCOVER: Fabric
SCAFO: Fibra di carbonio 100%SHELL: Carbon fi ber 100%
TELAIO: Titanio - ManganeseRAIL: Titanium - Manganese
PESO: Titanio gr.133 - Manganese gr.166WEIGHT: Titanium gr.133 - Manganese gr.166
LARGHEZZA: 127 mmWIDTH: 127 mm
LUNGHEZZA: 270 mmLENGTH: 270 mm
MATERIALE: LoricaCOVER: Lorica
TELAIO: Titanio - ManganeseRAIL: Titanium - Manganese
PESO: 210 gr.WEIGHT: 210 gr.
LARGHEZZA: 127 mmWIDTH: 127 mm
LUNGHEZZA: 273 mmLENGTH: 273 mm
SCAFO:
SHELL:
42
AccessoriAccessoryAccessoriAccessoryAccessori AccessoryAccessoriAccessoryAccessoriAccessoryAccessoriAccessory
Grasso speciale Gipiemme, antiacqua Special grease Waterproof
Chiavi a tubo per nippelsNipples tools
Pattini freni per carbonioCarbon fibre bracke pad
Borsa per ruoteWheels bag
Nipples e Raggi neri / lucidi - tondi / piattiNipples and Spoke / black - round / flat
Pinza smagliacatenChain tools
44Prolunghe e valvoleExtend long valve
Espositore ruoteDisplay of wheels
Kit tubeless Mozzo anteriore su cuscinettiHub front freewheels seal ball bearing
Mozzo posteriore a cassetta a sfereHub rear freewheels cassette
Mozzo posteriore a vite a sfereHub rear freewheels lose ball
Mozzo anteriore a sfereHub front freewheels ball
Mozzo posteriore cassetta su cuscinettiHub rear freewheels cassette seal ball bearing
45
Ghiere per cassettaLock rings
Bloccaggi alluminio: - corsa - mtb - silver - neriQuick Release: racing - mtb - silver - black
46
GIPIEMME può apportare ai suoi prodotti modifi che tecniche, migliorative della qualità, senza darne preavviso.GIPIEMME can technically improve the quality of its products with out advance notice.
O.L.D. : Termine internazionale per indicare la distanza tra le battute chiusura mozzi anteriore e posterire. Over Locknut Dimension, front and rear hub locknut dimension.
S.B.S. : Sistema brevettato GIPIEMME che riduce notevolmente gli spazi di frenata. Short Brake System, GIPIEMME braking patent system.
CNC : Cerchi lavorati con macchine a controllo. Rims Machined - Continuous Numeric Control, high technology working system. S.I.L.S : Sistema di bloccaggio dei nipples. Autolock system for nipples. A.B.S. : Sistema di bloccaggio dei nipples corti. Autolock system for short nipples.
dimescionpackagingdimensionpackagingdimensionpackaging NoteTecnicheTechnicalNotesNoteTecnicheTechnicalNotes
GIPIEMMEVia Salute, 34/1 Rossano Veneto (VI) ITALY
Stabilimento / Work address:Via Balbi 13, Loria (TV) ITALY - Tel. +39 0423 755939 - Fax +39 0423 755022
www.gipiemme.com - e-mail: [email protected] - www.cerchinisi.com