Post on 15-Feb-2019
www.inteaengineering.it
15
Azionamenti a parzializzazione d’ondaCutting phase drivers
Motor current: 16 .. 25A
Grafici delle tensioni al motore / Motor voltage supply
Il dispositivo E-speed è utilizzato per ridurre la corrente di avviamento dei motori asincroni trifase. A tale scopo vengono utilizzati 6 SCR , due per fase, che parzializzano la tensione di rete riducendone il valore efficace applicato al motore. In questo modo si ha la possibilità di regolare la corrente assorbita dal motore tramite semplici regolazione a trimmer.
E-speed device is used to reduce the starting current of three-phase asynchronous motors.To obtain this result, 6 SCR, 2 for each phase, are used to switch the mains voltage, reducing the RMS voltage applied to the motor. Using this technique, it is possible to adjust the motor current with intuitive control trimmers.
•
•
Specifiche tecniche Technical specifications
Codice Code Caratteristiche Features Descrizione DescriptionTF020I818 400V - 20A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
TF020I860 heatsink MAXI 400V - 25A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
TF020I388 230V - 18A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
TF020I166 400V - 20A n°1 0-10V input, 2 trimmer adjustment (MIN, MAX), n°2 digital inputs MAX, STOP
TF020I864 400V - 25A n°1 0-10V input, 2 trimmer adjustment (MIN, MAX), n°2 digital inputs MAX, STOP
TF020I352 400V - 16A n°1 0-10V input, 2 trimmer adjustment (MIN, MAX), n°2 digital inputs MAX, STOP
TF020I299 400V - 12A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
TF020I562 230V - 20A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
TF020I561 480V - 20A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
TF020I459 400V - 18A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
TF020I641 heatsink MAXI 400V - 25A n°2 IN 0-10V or 4-20mA. Majority control, n°4 trimmer (MIN, MAX, SET, BP), n°2 dig IN MAX, STOP Power Supply to ext: 24V
Codice Code Vedi tabella See table
Tensione di Alimentazione / Operating Voltage 230Vac or 400Vac or 460V (+/-10%)
Frequenza di alimentazione / Operating Frequency 50 o 60 Hz +/- 10%
Corrente nominale / Nominal current up to 25A
Corrente di sovraccarico (10”) / Max overload current 32A
Potenza dissipata dal controllo / Control board power supply 10W
Tensione in uscita / Auxiliary operating voltage 24Vdc unregulated +/-15%
Temperatura di lavoro / Operating temperature range Da -5°C a + 60°C
Regolazione MASSIMA TENSIONE di uscita (Trimmer VR4)Control MAX Output Voltage
Regolazione di MINIMA TENSIONE di uscita (Trimmer VR5)Control MIN Output Voltage
Regolazione CUT-OFF (Trimmer VR6)Control CUT-OFF
L’azienda si riserva il diritto di apportare modifiche tecniche ai prodotti o di cessarne la produzione senza obbligo di preavviso. Per le condizioni generali di vendita riferirsi al documento: CGVI-01-AA disponibile su richiesta.The company reserves the right to modify technical feature of the products or to halt production without notice. For terms and conditions of sale refer to the document: CGVI-01-AA available on request.