Termocoppia Miniatura - Delta Strumenti · Termocoppia Miniatura ad isolamento minerale con cavo di...

32

Transcript of Termocoppia Miniatura - Delta Strumenti · Termocoppia Miniatura ad isolamento minerale con cavo di...

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione

Tipo: T-010-K-1,5-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in PVC

T-01010/94

Dati tecnici

Termocoppia: NiCr/Ni, Tipo "K", sec. DIN IEC 584 Fe/CuNi, Tipo "J", sec. DIN IEC 584 Fe/CuNi, Tipo "L", sec. DIN 43710 Cu/CuNi, Tipo "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in PVC (vedi catalogo L-010)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-010 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with PVC-Insulated Lead Wire

T – 010 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 010 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 010 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”)

Additional versions or swaged constructions on request

Probe Length „A“: Please specify Lead Wire: PVC-Insulated flexible Thermocouple Wire (see Datasheet L-010) Wire Length „B“: Please specify Termination: Bare Ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore miniatura

Tipo: T-011-K-1,5-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in PVC e connettore miniatura

T-01110/96

Dati tecnici

Termocoppia: NiCr/Ni, Tipo "K", sec. DIN IEC 584 Fe/CuNi, Tipo "J", sec. DIN IEC 584 Fe/CuNi, Tipo "L", sec. DIN 43710 Cu/CuNi, Tipo "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale Isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in PVC (vedi catalogo L-010)

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-011 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with PVC-Insulated Lead Wire and Miniature Connector

T – 011 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 011 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 011 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: PVC-Insulated flexible Thermocouple Wire (see Datasheet L-010) Wire Length „B“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore standard

Tipo: T-013-K-1,5-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in PVC e connettore standard

T-01310/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in PVC (vedi catalogo L-010)

Terminale: Spina compensata standard

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-013 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with PVC-Insulated Lead Wire and Standard Connector

T – 013 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 013 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 013 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: PVC-Insulated flexible Thermocouple Wire (see datasheet L-010) Wire Length „B“: Please specify Termination: Standard Thermocouple Connector (see datasheet S-020) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione

Tipo: T-015-L-3,0-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in PVC schermato

T-01510/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in PVC, schermato (vedi catalogo L-015)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-015 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with PVC-Insulated Lead Wire with Copper Screen

T – 015 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 015 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 015 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: PVC-Insulated flexible Thermocouple Wire with

Copper Screen (see Datasheet L-015) Wire Length „B“: Please specify Termination: Bare ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore miniatura

Tipo: T-016-L-3,0-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in PVC schermato e connettore miniatura

T-01610/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J" "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in PVC, schermato (vedi catalogo L-015)

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-016 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with PVC-Insulated Lead Wire with Copper Screen and

Miniature Connector

T – 016 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 016 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 016 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: PVC-Insulated flexible Thermocouple Wire with

Copper Screen (see Datasheet L-015) Wire Length „B“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore standard

Tipo: T-018-L-3,0-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in PVC schermato e connettore standard

T-01810/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in PVC, schermato (vedi catalogo L-015)

Terminale: Spina compensata standard

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-018 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with PVC-Insulated Lead Wire with Copper Screen and

Standard Connector

T – 018 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 018 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 018 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: PVC-Insulated flexible Thermocouple Wire with

Copper Screen (see Datasheet L-015) Wire Length „B“: Please specify Termination: Standard Thermocouple Connector (see Datasheet S-020) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione

Tipo: T-020-L-3,0-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in gomma al silicone

T-02010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in gomma al silicone (vedi catalogo L-020)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-020 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Silicone-Insulated Lead Wire

T – 020 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 020 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 020 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Silicone-Insulated flexible Thermocouple Wire (see Datasheet L-020) Wire Length „B“: Please specify Termination: Bare ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore miniatura

Tipo: T-021-L-3,0-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in gomma al silicone e connettore miniatura

T-02110/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J", "L" e "T" Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in gomma al Silicone (vedi catalogo L-020)

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-021 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Silicone-Insulated Lead Wire and Miniature

Connector

T – 021 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 021 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 021 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Silicone-Insulated flexible Thermocouple Wire (see Datasheet L-020) Wire Length „B“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore standardTipo: T-023-L-3,0-100-1500

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in gomma al silicone e connettore standard

T-02310/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W.Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in gomma al silicone (vedi catalogo L-020)

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-023 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Silicone-Insulated Lead Wire and Standard

Connector

T – 023 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 023 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 023 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Silicone-Insulated flexible Thermocouple Wire (see Datasheet L-020) Wire Length „B“: Please specify Termination: Standard Thermocouple Connector (see Datasheet S-020) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione

Tipo: T-028-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in fibra di vetro siliconata

T-02810/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile e isolata in fibra di vetro siliconata (vedi catalogo L-028)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-028 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Fiberglass/Silicone-Insulated Lead Wire

T – 028 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 028 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 028 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Fiberglass/Silicone-Insulated flexible

Thermocouple Wire (see Datasheet L-028) Wire Length „B“: Please specify Termination: Bare ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione

Tipo: T-030-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon

T-03010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox.W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in Teflon (vedi catalogo L-030)

Terminale: File nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-030 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire

T – 030 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 030 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 030 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire (see Datasheet L-030) Wire Length „B“: Please specify Termination: Bare ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore miniatura

Tipo: T-031-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon e connettore miniatura

T-03110/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.: 2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in Teflon (vedi catalogo L-030)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-031 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire and Miniature

Connector

T – 031 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 031 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 031 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire (see Datasheet L-030) Wire Length „B“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensionee connettore standard

Tipo: T-033-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon e connettore standard

T-03310/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in Teflon (vedi catalogo L-030)

Terminale: Spina compensata standard

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-033 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire and Standard

Connector

T – 033 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 033 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 033 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire (see Datasheet L-030) Wire Length „B“: Please specify Termination: Standard Thermocouple Connector (see Datasheet S-020) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione

Tipo: T-035-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon schermato

T-03510/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in Teflon, schermato (vedi catalogo L-035)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-035 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire with Copper Screen

T – 035 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 035 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 035 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire with Copper Screen (see Datasheet L-035) Wire Length „B“: Please specify Termination: Bare ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore miniatura

Tipo: T-036-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon schermato e connettore miniatura

T-03610/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante : MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in Teflon, schermato (vedi catalogo L-035)

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-036 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire with Copper Screen and

Miniature Connector

T – 036 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 036 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 036 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire with Copper Screen (see Datasheet L-035) Wire Length „B“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione econnettore standard

Tipo: T-038-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon schermato e connettore standard

T-03810/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in Teflon, schermato (vedi catalogo L-035)

Terminale: Spina compensata standard

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: vedi catalogo T-190

Codice d'ordine:

T-038 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire with Copper Screen and

Standard Connector

T – 038 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 038 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 038 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire with Copper Screen (see Datasheet L-035) Wire Length „B“: Please specify Termination: Standard Thermocouple Connector (see Datasheet S-020) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione

Tipo: T-055-K-1,5-500-1000

Termocoppia Miniaturaad isolamento mineralecavo di estensione isolato in fibra di vetro con calza inox finale

T-05510/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Con cavo di termocoppia flessibile e isolata in fibra di vetro con calza inox finale (vedi catalogo L-055)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-055 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Fiberglass-Insulated Stainless Steel-braided

Lead Wire

T – 055 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 055 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 055 – K – 3,0 – 250 – 1000

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M. -No. 1.4571 or Stainless Steel, M. -No. 1.4541 Type K, N: Inconel 600, M. -No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Fiberglass-Insulated Stainless Steel-braided

flexible Thermocouple Wire (see Datasheet L-055) Wire Length „B“: Please specify Termination: Bare ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia miniatura ad isolamento minerale con cavo di estensione

Tipo: T-060-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon con protezione in tubo inox flessibile

T-06010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Cavo di termocoppia flessibile isolato in Teflon con protezione in tubo flessibile

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-060 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire

with Stainless Steel Armour

T – 060 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 060 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 060 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M. -No. 1.4571 or Stainless Steel, M. -No. 1.4541 Type K, N: Inconel 600, M. -No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire with Stainless Steel Armour Wire Length „B“: Please specify Termination: Bare ends Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore miniatura

Tipo: T-061-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon con protezione in tubo inox flessibile e connettore miniatura

T-06110/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J" "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Isolato in Teflon con protezione in tubo flessibile

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-061 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire with Armour and

Miniature Connector

T – 061 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 061 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 061 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M. -No. 1.4571 or Stainless Steel, M. -No. 1.4541 Type K, N: Inconel 600, M. -No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire with Stainless Steel Armour Wire Length „B“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con cavo di estensione e connettore standard

Tipo: T-063-K-3,0-150-2000

Termocoppia Miniaturaad isolamento mineralecon cavo di estensione isolato in Teflon con protezione in tubo inox flessibile e connettore standard

T-06310/96

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.:2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50 MΩ a 20°C e 250 VCC

Cavo di estensione: Isolato in Teflon con protezione in tubo flessibile

Terminale: Spina compensata standard

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Da specificare

Lunghezza „B“: Da specificare

Attacco a tenuta filettato: Vedi catalogo T-190

Codice d'ordine:

T-063 - - , - ......mm - ......mm K 1,0 „A“ „B“ J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Teflon-Insulated Lead Wire with Armour and

Standard Connector

T – 063 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 063 – – – A – B : Thermocouple (K, J, L, T, N) : Probe Diameter Example: T – 063 – K – 1,5 – 100 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M. -No. 1.4571 or Stainless Steel, M. -No. 1.4541 Type K, N: Inconel 600, M. -No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm 6.0 mm 6.4 mm (1/4”) Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire with Stainless Steel Armour Wire Length „B“: Please specify Termination: Standard Thermocouple Connector (see Datasheet S-020) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a baionetta con cappuccio regolabile

Tipo: T-070-K-6-2000

Termocoppia a baionettacon cappuccio regolabile

T-07010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 2, sec. DIN IEC 584

Giunto caldo: A massa

Temperatura massima su puntale: + 400°C

Molla: Diametro come puntale, lunghezza 200 mm, con cappuccio regolabile

Cavo di estensione: Cavo di termocoppia flessibile isolato in fibra di vetro con calza esterna in acciaio inox (vedi catalogo L-055)

Terminale: Fili nudi

Diametro puntale: 6,0 mm 8,0 mm

Lunghezza: Da specificare

Adattatori di montaggio: vedi catalogo T-197

Codice d'ordine:

T-070 - - - ......mm K 6 Lunghezza cavo J 8 L

Spring Loaded Thermocouple with adjustable Bayonet Cap

T – 070 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 070 – – – A : Thermocouple (K, J, L) : Probe Diameter Example: T – 070 – K – 6,0 – 2000

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Tolerance: Class 1 acc. to DIN IEC 584 Hot Junction: galvanical connected with Protection Sheath Max. Probe Temp.: up to 400°C Probe Diameter (): 6.0 mm 8.0 mm Additional versions on request Spring: Stainless Steel, same diameter as probe,

length approx. 200 mm Prozess connection: adjustable Bayonet Cap Lead Wire: Fiberglass-Insulated Stainless Steel-braided

flexible Thermocouple Wire (see Datasheet L-055) Wire Length „A“: Please specify Termination: Bare ends Accessories: Article Datasheet Stud Bolt T – 197

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a cavetto isolato in kapton

Tipo: T-080-K-500

Termocoppia a cavettoisolato in kapton, con connettore miniatura

T-08010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710

Tolleranza: Classe 1, sec. DIN IEC 584

Temperatura di utilizzo: 285°C;finoa400°Cperbreviperiodi

Giunto caldo: Esposto

Terminale: Spina compensata miniatura

Diametro sonda: < 1,0 mm

Cavo di estensione: Cavoditermocoppiaflessibileisolato inkapton(vedicatalogoL-040)

Lunghezza „A“: Daspecificare

Codice d'ordine:

T-080 - - ......mm K „A“ J L

Flexible Wire Thermocouple with Kapton-Insulated Lead Wire with

Miniature Connector

T – 080 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 080 – – A : Thermocouple (K, J, L) Example: T – 080 – K – 500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Tolerance: Class 1 acc. to DIN IEC 584 Hot Junction: Exposed Max. Probe Temp.: 285°C, temporarily up to 400°C Lead Wire: Kapton-Insulated solid Thermocouple Wire (see Datasheet L-040) Probe Diameter: < 1.0 mm Additional versions on request Wire Length „A“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a cavetto flessibile

Tipo: T-085-K-750

Termocoppia a cavetto isolato in fibra di vetro con connettore miniatura

T-08510/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710

Tolleranza: Classe 1, sec. DIN IEC 584

Temperatura di utilizzo: 285°C; fino a 400°C per brevi periodi

Giunto caldo: Esposto

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 x 1,7 mm

Cavo: Cavo di termocoppia flessibile isolato in fibra di vetro (vedi catalogo L-050)

Lunghezza „A“: Da specificare

Codice d'ordine:

T-085 - - ......mm K „A“ J L

Flexible Wire Thermocouple with Fiberglass-Insulated Lead Wire with

Miniature Connector

T – 085 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 085 – – A : Thermocouple (K, J, L) Example: T – 085 – K – 500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Tolerance: Class 1 acc. to DIN IEC 584 Hot Junction: Exposed Max. Probe Temp.: 400°C, temporarily up to 500°C Lead Wire: Fiberglass-Insulated solid Thermocouple Wire (see Datasheet L-050) Probe Mesurements: ca. 1.0 mm x 1.7 mm Additional versions on request Wire Length „A“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con connettore miniatura

Tipo: T-110-K-1,5-1500

Termocoppia Miniaturaad isolamento mineralecon connettore miniatura

T-11010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.: 2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50MΩa20°Ce250VCC

Terminale: Spina compensata miniatura

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Daspecificare

Attacco a tenuta filettato: VedicatalogoT190

Codice d'ordine:

T-110 - - , - ......mm K 1,0 J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Miniature Connector

T – 110 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 110 – – – A : Thermocouple (K, J, L) : Probe Diameter Example: T – 110 – K – 1,5 – 1500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm (1/16”) 2.0 mm 3.0 mm 3.2 mm (1/8”) 4.8 mm Additional versions or swaged constructions on

request Probe Length „A“: Please specify Termination: Miniature Thermocouple Connector (see Datasheet S-010) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con connettore standard

Tipo: T-120-L-3,0-1000

Termocoppia Miniaturaad isolamento mineralecon connettore Standard

T-12010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.: 2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50MΩa20°Ce250VCC

Terminale: Spina compensata standard

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm (1/16") 2,0 mm 3,0 mm 3,2 mm (1/8") 6,0 mm 6,4 mm (1/4")

Lunghezza „A“: Daspecificare

Attaco a tenuta filettato: VedicatalogoT190

Codice d'ordine:

T-120 - - , - ......mm K 1,0 J 1,5 L 1,6 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Standard Connector

T – 120 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 120 – – – A : Thermocouple (K, J, L) : Probe Diameter Example: T – 120 – L – 3,0 – 1000

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm 2.0 mm 3.0 mm 3.2 mm 4.8 mm 6.0 mm 6.4 mm Additional versions or swaged constructions on

request Probe Length „A“: Please specify Termination: Standard Thermocouple Connector (see Datasheet S-020) Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia a isolamento minerale con connettore LEMO

Tipo: T-130-K-1,5-500-1

Termocoppia Miniaturaad isolamento mineralecon connettore LEMO

T-13010/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W.Nr.: 2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50MΩa20°Ce250VCC

Terminale: Spina LEMO grandezza 0, 1 o 2 (daspecificare)

Diametro sonda: Gr. 0 Gr. 1 Gr. 2 1,0 mm 1,0 mm 1,0 mm 1,5 mm 1,5 mm 1,5 mm 1,6 mm 1,6 mm 1,6 mm 2,0 mm 2,0 mm 2,0 mm 3,0 mm 3,0 mm 3,0 mm 3,2 mm 3,2 mm 3,2 mm 6,0 mm 6,0 mm 6,4 mm

Lunghezza „A“: Daspecificare

Attacco a tenuta filettato: VedicatalogoT190

Codice d'ordine:

T-130 - - , - ......mm - K 1,0 0 J 1,5 1 L 1,6 2 T 2,0 3,0 3,2 6,0 6,4

Mineral-Insulated Thermocouple with Lemo Connector

T – 130 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 130 – – – A – : Thermocouple (K, J, L) : Probe Diameter : Connector Size Example: T – 130 – K – 1,5 – 500 – 1

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M.-No. 1.4571 or Stainless Steel, M.-No. 1.4541 Type K, N: Inconel 600, M.-No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Termination: Lemo-plug 2-pin Connector Size (): Size 0 Size 1 Size 2 Probe Diameter (): 0.15 mm 0.15 mm 0.15 mm (only Type K) 0.25 mm 0.25 mm 0.25 mm (only Type K) 0.5 mm 0.5 mm 0.5 mm (only Type K, J) 1.0 mm 1.0 mm 1.0 mm 1.5 mm 1.5 mm 1.5 mm 1.6 mm 1.6 mm 1.6 mm 2.0 mm 2.0 mm 2.0 mm 3.0 mm 3.0 mm 3.0 mm 3.2 mm 3.2 mm 3.2 mm 4.8 mm 4.8 mm 6.0 mm 6.0 mm 6.4 mm Additional versions or swaged constructions on

request Probe Length „A“: Please specify Accessories: Article Datasheet Compression Fitting T – 190

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia "Screw-In"

Tipo: T-162-K-1,5-6-11-500

Termocoppia "Screw-In" con cavo di estensione isolato in gomma al silicone

T-16210/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipi "J", "L" e "T". Inconel 600, W. Nr.: 2.4816 per tipo "K"

Giunto Caldo: Isolato

Resistenza d'isolamento: >50MΩa20°Ce250VCC

Cavo di estensione: Cavoditermocoppiaflessibileisolato in gomma al silicone (vedi catalogo L-020)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm 2,0 mm

Filettatura: M6 M8

Lunghezza „A“: Daspecificare

Lunghezza „B“: Daspecificare

Codice d'ordine:

T-162 - - , - - .....mm - .....mm K 1,0 6 „A“ „B“ J 1,5 8 L 1,6 T 2,0

Screw-In Thermocouple with Silicone-Insulated Lead Wire

T – 162 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 162 – – – – A – B : Thermocouple (K, J, L) : Probe Diameter : Thread Example: T – 162 – K – 1,5 – M6x1 – 11 – 500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M. -No. 1.4571 or Stainless Steel, M. -No. 1.4541 Type K, N: Inconel 600, M. -No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm 2.0 mm 3.0 mm 3.2 mm Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Silicone-Insulated flexible Thermocouple Wire (see Datasheet L-020) Wire Length „B“: Please specify Termination: Bare ends Process Connection (): Please specify thread

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Termocoppia "Screw-In"

Tipo: T-163-K-1,6-8-15-500

Termocoppia "Screw-In"con cavo di estensione isolato in Teflon

T-16310/94

Dati tecnici

Termocoppia: NiCr/Ni, Type "K", sec. DIN IEC 584 Fe/CuNi, Type "J", sec. DIN IEC 584 Fe/CuNi, Type "L", sec. DIN 43710 Cu/CuNi, Type "T", sec. DIN IEC 584

Tolleranza: Classe 1, sec. DIN IEC 584

Materiale isolante: MgO super compresso

Guaina inox: Acciaio inox W. Nr.1.4541 per tipo "J", "L" e "T" Inconel 600, W. Nr.: 2.4816 per tipo "K"

Giunto caldo: Isolato

Resistenza d'isolamento: >50MΩa20°Ce250VCC

Cavo di estensione: Cavoditermocoppiaflessibileisolato inTeflonschermato (vedi catalogo L-035)

Terminale: Fili nudi

Diametro sonda: 1,0 mm 1,5 mm 1,6 mm 2,0 mm

Filettatura: M6 M8

Lunghezza „A“: Daspecificare

Lunghezza „B“: Daspecificare

Codice d'ordine:

T-163 - - , - - .....mm - .....mm K 1,0 6 „A“ „B“ J 1,5 8 L 1,6 T 2,0

Screw-In Thermocouple with Teflon-Insulated Lead Wire with Copper Screen

T – 163 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 163 – – – – A – B : Thermocouple (K, J, L) : Probe Diameter : Thread Example: T – 163 – K – 1,6 – M8x1,25 – 15 – 500

Technical Features: Thermocouple (): Thermocouple Plus Minus Norm Type K NiCr NiAl IEC 584 Type J Fe CuNi IEC 584 Type L Fe CuNi DIN 43710 Type T Cu CuNi IEC 584 Type N NiCrSi NiSi IEC 584 Tolerance: Class 1 acc. to DIN IEC 584 Insulation Material: Densely packed MgO Sheath Material: Type J, L and T: Stainless Steel, M. -No. 1.4571 or Stainless Steel, M. -No. 1.4541 Type K, N: Inconel 600, M. -No. 2.4816 Hot Junction: Insulated Insulation Resistance: > 50 MΩ at 20°C and 250 V DC Probe Diameter (): 0.15 mm (only Type K) 0.25 mm (only Type K) 0.5 mm (only Type K and J) 1.0 mm 1.5 mm 1.6 mm 2.0 mm 3.0 mm 3.2 mm Additional versions or swaged constructions on

request Probe Length „A“: Please specify Lead Wire: Teflon-Insulated flexible Thermocouple Wire with Copper Screen (see Datasheet L-035) Wire Length „B“: Please specify Termination: Bare ends Process Connection (): Please specify thread

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Attacchi a tenuta regolabili

Tipo: T-190-M6-3,0-E

Attacchi a tenuta regolabiliper termocoppie e termoresistenze miniatura

T-19010/94

Dati tecnici

Corpo: Acciaio inox

Ogiva: Teflon o acciaio inox (da specificare)

Filettatura: M4 M6 M8 M10 1,0 1,0 1,0 1,0 1,5 1,5 1,5 1,5 1,6 1,6 1,6 1,6 2,0 2,0 2,0 2,0 3,0 3,0 3,0 3,2 3,2 3,2 4,8 4,8 6,0 6,4

Altre filettature disponibili su richiesta

Codice d'ordine:

T-190 - - , - M4 1,0 T (Ogiva in Teflon) M6 1,5 E (Ogiva in Acciaio Inox) M8 1,6 M10 2,0 3,0 3,2 4,8 6,0 6,4

Compression Fitting for the Mounting of Mineral-Insulated Thermocouples

and Resistance Thermometers

T – 190 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 190 - - - - - : Thread : Thread runout : Bore Diameter : Ferrule Material : Ferrule Type Example: T – 190 – M6x1 – 1 – 3,0 – E – Y2

Technical Features:

Body Material: Stainless Steel Process Connection (): Please specify thread Thread runout (): (1) undercut, (2) conical Bore Diameter (): Please specify Ferrule Material (): Stainless Steel or Teflon Ferrule Type (): Type Bore Diameter

V1 Ø 0.6 mm, Ø 1.1 mm, Ø 1.6 mm

V2

Ø 0.6 mm, Ø 1.1 mm, Ø 1.6 mm, Ø 2.1 mm, Ø 3.1 mm, Ø 3.3 mm,

Ø 3.4 mm, Ø 3.6 mm, Ø 4.1 mm, Ø 4.6 mm

V3 Ø 3.3 mm, Ø 4.1 mm, Ø 4.6 mm, Ø 4.9 mm, Ø 5.1 mm, Ø 6.1 mm

Y1 Ø 0.6 mm, Ø 0.8 mm, Ø 1.1 mm, Ø 1.6 mm,

Ø 2.1 mm

Y2

Ø 0.6 mm, Ø 0.9 mm, Ø 1.1 mm, Ø 1.6 mm, Ø 1.7 mm, Ø 2.1 mm,

Ø 8.1 mm

M1 Ø 1.6 mm, Ø 3.1 mm

M2 Ø 1.6 mm

M3 Ø 0.6 mm, Ø 0.9 mm, Ø 1.1 mm, Ø 1.6 mm

DELTA STRUMENTI S.r.l. - Via Mattei, 6 - 21036 GEMONIO (Va) - Tel. 0332 604.667 - Fax 0332 610.511www.deltastrumenti.it - [email protected]

Esempio

Adattatore di montaggio

Tipo: T-197-R-M12-1-50-8

Adattatore di montaggio

Tipo: T-197-S-R1/4´´-8

Adattatori di montaggioper termocoppie e termoresistenze a baionetta

T-19710/94

Dati tecnici

Modello „R“

Corpo: Ottone, placcato nickel

Fittature: M10 x 1 M12 x 1

Altezza: 25 mm 50 mm

Diametro sonda: 6,0 mm 8,0 mm

Dati tecnici

Modello „S“

Corpo: Ottone, placcato nickel

Filettatura: M12 x 1 M14 x 1,5 R 1/4´´ R 3/8´´

Altezza: 32 mm

Diametro sonda: 6,0 mm 8,0 mm

Codice d'ordine:

T-197 R - - , - M10 x 1 25 6 M12 x 1 50 8

T-197 S - - M12 x 1 6 M14 x 1,5 8

Stud Bolt for Springloaded Thermocouples and Resistance

Thermometers

T – 197 Rev. 01 – 10/01

1 / 1

Ordering Code: T – 197 – R – – – : Thread : Height : Bore Diameter T – 197 – S – – : Thread : Bore Diameter Example: T – 197 – R – M12x1 – 50 – 8 T – 197 – S – R1/4“ – 8

Technical Features: Model: Type „R“ Material: Stainless Steel Process Connection (): Please specify thread Height (): Please specify Bore Diameter (): Please specify Model: Type „S“ Material: Stainless Steel Process Connection (): Please specify thread Height (): Please specify Bore Diameter (): Please specify