T 40-P CM · TIPO: T 40/P CM Caratteristica Norma di riferimento U.d.M Valore Tolleranza...
Transcript of T 40-P CM · TIPO: T 40/P CM Caratteristica Norma di riferimento U.d.M Valore Tolleranza...
TIPO: T 40/P CM
Caratteristica Norma di riferimento U.d.M Valore Tolleranza
Characteristic Reference norm U.o.M. Value Tolerance
Densità netta UNI EN ISO 845 kg/m3 40 ± 5%
Net density DIN 53420
Resistenza alla compressione 40% UNI EN ISO 3386 kPa 5,2 ± 15%
Compression load deflection 40% BS 4443 P1 met. 7 - DIN 53577
Indentazione 25% UNI EN ISO 2439 met. B N 135 ± 15%
Identation deflection 25% DIN 53576/B
Indentazione 40% UNI EN ISO 2439 met. B N 195 ± 15%
Identation deflection 40% DIN 53576/B
Indentazione 65% UNI EN ISO 2439 met. B N 400 ± 15%
Identation deflection 65% DIN 53576/B
Resa elastica UNI EN ISO 8307 % 50 ± 10%
Ball rebound ASTM D-3574
Carico a rottura UNI EN ISO 1798 kPa 135 Min.
Tensile strength DIN 53571
Allungamento a rottura UNI EN ISO 1798 % 110 Min.
Elongation at break DIN 53571
Fatica dinamica UNI 6356 Pt. 2 % 28 Max
Dynamic fatigue
Deformazione permanente 50% UNI EN ISO 1856 % 6,0 Max
Compression set 50% DIN 53572 - BS 4443 P1 met - 6A
Deformazione permanente 75% UNI EN ISO 1856 % 8,0 Max
Compression set 75% DIN 53572 - BS 4443 P1 met - 6A
Colori
Colours
Comportamento al fuoco secondo le norme
Flame test according to
FAR 25853
MVSS Motor Vehicle Safety STD 302
SCHEDA TECNICA
Giallo
Yellow
IMO Resolution A 652(16)
California Technical Bulletin 117/2013 - Section 3
UNI 9175 (classe 1 IM)
Arrêté du 28 Août 1991 Classement M4
Schedule 1 Part 1 of the Furniture and Furnishings (Fire) (Safety) Regulations 1988, amended 1989 and 1993 (B.S. 5852: Part 2 Crib V)
T 40-P CM Giugno 2015