SB-DB-SBB-DBB a Spillo - Filettate SB-DB-SBB-DBB Needle ... · SB-DB-SBB-DBB a Spillo - Filettate...
Transcript of SB-DB-SBB-DBB a Spillo - Filettate SB-DB-SBB-DBB Needle ... · SB-DB-SBB-DBB a Spillo - Filettate...
SB-DB-SBB-DBB a Spillo - FilettateSB-DB-SBB-DBB Needle Type - Threaded
Mod. 130-1 ... 190-1
Applicazioni
Intercettazione e sfiato di strumenti di pressione (manometri,
pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali, particolar-
mente indicate in installazioni
con presenza di vibrazioni.
Connessioni
Filettate secondo ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Standard: 6000 PSI (420 bar)
Opzionale: 10000 PSI (700 bar)
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation, particular
recommended
in presence of vibration.
Connections
Threaded to ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Standard: 6000 PSI (420 bar)
Optional: 10000 PSI (700 bar)
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
NPT NPT - F A max (mm) Ø B max (mm) Kg
1/4” NPT-F / M 1/4” 120 50 2,0
1/2” NPT-F / M 1/2” 120 70 4,0
3/4” NPT-F / M 3/4” 130 70 4,5
1” NPT-F / M 1” 150 70 5,0
Ingresso Uscita Dimensioni Peso Inlet Outlet Dimensions Weight
SB SBBDB DBB
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Opzioni / OptionsVedere tabella / See table
1 L T * * *
* NPT standard Aggiungere / Add: R = BSPT thread G = BSPP thread Es / Ex: DR = 1/2’’ BSPT
Materiale TenutaSeal material
T PTFE (std)
G Grafite / Graphite
X A richiesta / On demand
D D D
E 3/4” NPT-F
F 1” NPT-F
B 1/4” NPT-F
D 1/2” NPT-F
* Connessioni OUT Connections OUT
E 3/4” NPT
F 1” NPT
B 1/4” NPT
D 1/2” NPT
* Connessioni IN Connections IN
19DBB
Versione a spillo Needle Type
SB
DB
SBB
DBB
13
14
18
19
Single Block
Double Block
Single Block&Bleed
Double Block&Bleed
0
1
Filetto FxF / Thread FxF
Filetto MxF / Thread MxF
Connessioni / Connections
B
A
110 max
220
max
1/2" NPT-F
(Posizione aperta)(Fully open position)
(Sfiato)(Vent)
(Pos
izio
ne a
pert
a)(F
ully
ope
n po
sitio
n)
Mo
d.
130-
1 ..
. 19
0-1
• R
ev.
2 -
04/2
012
www.indravalves.it • [email protected] • Tel. +39 02 97298663
Mod. 130-1 ... 190-1
L
DL
N
C
LF2
D
SD
M
X
Materiali / Materials
S.S. 316L
S.S. 316 / 316L (Dual grade)
S.S. 316 Nace
C.S. A 105
C.S. A 350 LF2
Duplex F51
Superduplex
Monel 400
A richiesta / On demand
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
B
D
1/4’’ NPT-F
1/2’’ NPT-F
*Sfiato / Vent(solo per / only for SBB-DBB)
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Mod. 135-6 ... 195-6
Applicazioni
Intercettazione e sfiato di strumenti di pressione
(manometri, pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali,
particolarmente indicate in installazioni
con presenza di vibrazioni.
Connessioni
A saldare BW o SW
Filettate secondo ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Secondo schedula
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation, particular
recommended
in presence of vibration.
Connections
Welding BW or SW
Threaded to ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
To schedule rating
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
SB-DB-SBB-DBB a Spillo - A Saldare BW&SWSB-DB-SBB-DBB Needle Type - Welding BW&SW
BW / SW NPT - F A max (mm) Ø B max (mm) Kg
1/4” 1/4” std 130 50 2,0
1/2” 1/2” std 130 70 3,5
3/4” 1/2” std 130 70 3,5
1” 1/2” std 150 70 4,0
Ingresso Uscita Dimensioni Peso Inlet Outlet Dimensions Weight
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
SB SBBDB DBB
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Opzioni / OptionsVedere tabella / See table
5 L G * * *
* NPT standard Aggiungere / Add: R = BSPT thread G = BSPP thread Es / Ex: DR = 1/2’’ BSPT
Materiale TenutaSeal material
T PTFE
G Grafite / Graphite (std)
X A richiesta / On demand
D D D
E 3/4” NPT-F
F 1” NPT-F
B 1/4” NPT-F
D 1/2” NPT-F
* Connessioni OUT Connections OUT
B
D
1/4’’ NPT-F
1/2’’ NPT-F
*Sfiato / Vent(solo per / only for SBB-DBB)
19DBB
Versione a spillo Needle Type
SB
DB
SBB
DBB
13
14
18
19
Single Block
Double Block
Single Block&Bleed
Double Block&Bleed
5
6
BWxFiletto F / BWxThread F
SWxFiletto F / SWxThread F
Connessioni / Connections
BW40
BW 40
BW 80
BW 160
BW XXS
SW 40
SW 80
SW 160
SW XXS
Schedula / Schedule
E 3/4”
F 1”
B 1/4”
D 1/2”
Connessioni INConnections IN
X A richiestaOn demand
A
B
110 max
220
max
1/2" NPT-F
(Posizione aperta)(Fully open position)
(Sfiato)(Vent)
(Pos
izio
ne a
pert
a)(F
ully
ope
n po
sitio
n)
Mo
d.
135-
6 ..
. 19
5-6
• R
ev.
2 -
04/2
012
Mod. 135-6 ... 195-6
L
DL
N
C
LF2
D
SD
M
X
Materiali / Materials
S.S. 316L
S.S. 316 / 316L (Dual grade)
S.S. 316 Nace
C.S. A 105
C.S. A 350 LF2
Duplex F51
Superduplex
Monel 400
A richiesta / On demand
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Mod. 137 ... 197
Applicazioni
Intercettazione e sfiato di strumenti di pressione
(manometri, pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali,
particolarmente indicate in installazioni
con presenza di vibrazioni.
Connessioni
Flangiate-Filettate secondo ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
Secondo rating flangia
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation,
particular recommended
in presence of vibration.
Connections
Flanged-Threaded to ANSI-ASME B1.20.1
ISO 228 - ISO 7/1
Rating
To flange rating
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
SB-DB-SBB-DBB a Spillo - Flangiate-Filettate SB-DB-SBB-DBB Needle Type - Flanged-Threaded
Ingresso Flangiato Uscita Filettata Dimensioni Peso Flanged Inlet Threaded Outlet Dimensions Weight
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
Ingresso Flangiato Uscita Filettata Dimensioni Peso Flanged Inlet Threaded Outlet Dimensions Weight
DN Rating NPT - F A (mm) Ø B (mm) Kg
1/2” 150 * 1/2” std 159 90 4,5
1/2” 300 1/2” std 161 95 5,0
1/2” 600 1/2” std 168 95 5,0
1/2” 900-1500 1/2” std 176 120 6,0
1/2” 2500 1/2” std 184 135 7,5
3/4” 150 * 1/2” std 160 100 5,0
3/4” 300 1/2” std 163 115 5,5
3/4” 600 1/2” std 170 115 5,5
3/4” 900-1500 1/2” std 179 130 7,0
3/4” 2500 1/2” std 186 140 8,0
1” 150 1/2” std 162 110 5,0
1” 300 1/2” std 165 125 6,0
1” 600 1/2” std 171 125 6,0
DN Rating NPT - F A (mm) Ø B (mm) Kg
1” 900-1500 1/2” std 182 150 8,0
1” 2500 1/2” std 189 160 10,0
1 1/2” 150 1/2” std 165 125 6,0
1 1/2” 300 1/2” std 168 155 7,5
1 1/2” 600 1/2” std 176 155 7,5
1 1/2” 900-1500 1/2” std 187 180 10,5
1 1/2” 2500 1/2” std 198 205 16,0
2” 150 1/2” std 166 150 7,0
2” 300 1/2” std 170 165 8,0
2” 600 1/2” std 179 165 8,5
2” 900-1500 1/2” std 192 215 15,5
2” 2500 1/2” std 205 235 22,0
* solo versione RF / only RF version
SB SBBDB DBB
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Opzioni / OptionsVedere tabella / See table
7 L T * * *
* NPT standard Aggiungere / Add: R = BSPT thread G = BSPP thread Es / Ex: DR = 1/2’’ BSPT
Materiale TenutaSeal material
T PTFE (std)
G Grafite / Graphite
X A richiesta / On demand
D D D
B 1/4” NPT-F
D 1/2” NPT-F (std)
* Connessioni OUT Connections OUT
B
D
1/4’’ NPT-F
1/2’’ NPT-F (std)
*Sfiato / Vent(solo per / only for SBB-DBB)
19DBB
Versione a spillo Needle Type
SB
DB
SBB
DBB
13
14
18
19
Single Block
Double Block
Single Block&Bleed
Double Block&Bleed
7 Flangia-Filetto / Flange-Thread
Connessioni / Connections
150RF
150 RF
300 RF
600 RF
900/1500 RF
2500 RF
150 RJ
300 RJ
600 RJ
900/1500 RJ
2500 RJ
Flangia / Flange
J 2” Flang.
Connessioni INConnections IN
E 3/4” Flang.
F 1” Flang.
D 1/2” Flang.
H 1 1/2” Flang.
A
B
110 max
220
max
1/2" NPT-F
(Posizione aperta)(Fully open position)
(Sfiato)(Vent)
(Pos
izio
ne a
pert
a)(F
ully
ope
n po
sitio
n)
Mo
d.
137
...
197
• R
ev.
2 -
04/2
012
Mod. 137 ... 197
L
DL
N
C
LF2
D
SD
M
X
Materiali / Materials
S.S. 316L
S.S. 316 / 316L (Dual grade)
S.S. 316 Nace
C.S. A 105
C.S. A 350 LF2
Duplex F51
Superduplex
Monel 400
A richiesta / On demand
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Mod. 138 ... 198
Applicazioni
Intercettazione e sfiato di strumenti di pressione (manometri,
pressostati, trasmettitori, ecc.).
Utilizzate per consentire un’installazione
più compatta rispetto alle valvole tradizionali, particolar-
mente indicate in installazioni
con presenza di vibrazioni.
Connessioni
Flangiate-Flangiate
Rating
Secondo rating flangia
Tenute
Standard: PTFE (T ≤ 200° C)
Opzionale: Grafite (T > 200° C)
Peculiarità
Otturatore svincolato dallo stelo
Spina di blocco del bonnet
Protezione antipolvere
Riduzione di tempi e costi d’installazione
Applications
Pressure instruments isolation and vent
(gauges, switches, transmitters, etc.).
Used as alternative to conventional
manifold to permit a more compact installation, particular
recommended
in presence of vibration.
Connections
Flanged-Flanged
Rating
To flange rating
Seals
Standard: PTFE (T ≤ 200° C)
Optional: Graphite (T > 200° C)
Features
Not rotating trim
Bonnet locking pin
Dust cup
Reduction of time and installation cost
SB-DB-SBB-DBB a Spillo - Flangiate-FlangiateSB-DB-SBB-DBB Needle Type - Flanged-Flanged
Ingresso / Uscita Dimensioni Peso Inlet / Outlet Dimensions Weight
Dimensioni e pesi in tabella sono indicativi e possono subire variazioni senza preavvisoDimensions and weight in table are for reference only and may be changed without notice
Ingresso / Uscita Dimensioni Peso Inlet / Outlet Dimensions Weight
DN Rating A (mm) Ø B (mm) Kg
1/2” 150 * 192 90 6,0
1/2” 300 206 95 6,5
1/2” 600 222 95 6,5
1/2” 900-1500 228 120 9,0
1/2” 2500 244 135 12,0
3/4” 150 * 196 100 6,5
3/4” 300 212 115 7,5
3/4” 600 226 115 7,5
3/4” 900-1500 234 130 10,5
3/4” 2500 248 140 13,0
1” 150 208 110 7,0
1” 300 216 125 8,5
1” 600 230 125 8,5
DN Rating A (mm) Ø B (mm) Kg
1” 900-1500 242 150 13,0
1” 2500 254 160 16,0
1 1/2” 150 216 125 8,5
1 1/2” 300 222 155 11,0
1 1/2” 600 238 155 11,5
1 1/2” 900-1500 248 180 18,0
1 1/2” 2500 272 205 28,5
2” 150 218 150 10,5
2” 300 218 165 12,5
2” 600 238 165 13,5
2” 900-1500 264 215 27,0
2” 2500 290 235 40,5
* solo versione RF / only RF version
SBBDBSB DBB
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209
Opzioni / OptionsVedere tabella / See table
8 L T * * *
* NPT standard Aggiungere / Add: R = BSPT thread G = BSPP thread Es / Ex: DR = 1/2’’ BSPT
Materiale TenutaSeal material
T PTFE (std)
G Grafite / Graphite
X A richiesta / On demand
D D
B
D
1/4’’ NPT-F
1/2’’ NPT-F (std)
*Sfiato / Vent(solo per / only for SBB-DBB)
19DBB
Versione a spillo Needle Type
SB
DB
SBB
DBB
13
14
18
19
Single Block
Double Block
Single Block&Bleed
Double Block&Bleed
8 Flangia-Flangia / Flange-Flange
Connessioni / Connections
150RF
150 RF
300 RF
600 RF
900/1500 RF
2500 RF
150 RJ
300 RJ
600 RJ
900/1500 RJ
2500 RJ
Flangia / Flange
J 2” FLANG.
Connessioni IN-OUTConnections IN-OUT
E 3/4” FLANG.
F 1” FLANG.
D 1/2” FLANG.
H 1 1/2” FLANG.
A
B
110 max
220
max
1/2" NPT-F
(Posizione aperta)(Fully open position)
(Sfiato)(Vent)
(Pos
izio
ne a
pert
a)(F
ully
ope
n po
sitio
n)
Mo
d.
138
...
198
• R
ev.
2 -
04/2
012
Mod. 138 ... 198
L
DL
N
C
LF2
D
SD
M
X
Materiali / Materials
S.S. 316L
S.S. 316 / 316L (Dual grade)
S.S. 316 Nace
C.S. A 105
C.S. A 350 LF2
Duplex F51
Superduplex
Monel 400
A richiesta / On demand
Le dimensioni, espresse in “mm”, sono indicative e possono subire variazioni senza preavviso. / Dimensions are in “mm” for reference only, and may be changed without notice.
Come ordinareOrdering Information
REPRESENTED IN AUSTRALIA BY: TETRAPY PTY LTD WWW.TETRAPY.COM.AUEMAIL: [email protected]: 1300 001 209