Rui Pinho CV, Maggio 2017 · 2017-07-18 · Rui Pinho CV, Maggio 2017 CURRICULUM VITAE DATI...

Rui Pinho CV, Maggio 2017

CURRICULUM VITAE

DATI PERSONALI Nome: Rui Pinho Data: 23 Maggio 1972 Nazionalità: Portoghese Email: [email protected] Indirizzo: Dipartimento Ingegneria Civile e Architettura Università di Pavia 27100 Pavia, Italia

FORMAZIONE • Dottorato in Ingegneria Sismica, Imperial College London, Regno Unito, 1999

Borsa Dottorato della Fondazione Calouste Gulbenkian, Portogallo Borsa di Ricerca della Commissione Europea, nell’ambito del progetto ICONS

• Master II° Livello in Ingegneria Sismica e Dinamica Strutturale, Imperial College London, 1996 Lode e menzione come miglior studente dell’anno accademico nel Master in Ingegneria Sismica

• Laurea in Ingegneria Civile, Università di Porto, Portogallo, 1995 Riconoscimento come miglior laureato nell’indirizzo di Analisi e Progettazione Strutturale

CARICHE UNIVERSITARIE • Professore Associato, Dipartimento di Ingegneria Civile e Architettura, Università degli Studi di

Pavia, 2015-ad oggi Settore Scientifico Disciplinare ICAR/09 - Tecnica delle Costruzioni

• Ricercatore, Dipartimento di Ingegneria Civile e Architettura, Università degli Studi di Pavia, 2005-2014 Settore Scientifico Disciplinare ICAR/09 - Tecnica delle Costruzioni

• Professore a Contratto, Dipartimento di Meccanica Strutturale, Università di Pavia, 2002-2005 Carica approvata dal MIUR con nota prot.n.1747 del 16/10/2002, in applicazione della procedura prevista dal D.M. 26/01/2001, n.13 – Incentivi a favore della mobilità di studiosi italiani e stranieri impegnati all’estero

• Ricercatore, Dipartimento Ingegneria Civile, Imperial College London, Regno Unito, 1999-2001 Lecturer of Earthquake Egineering

CARICHE ENTI DI RICERCA • Direttore Scientifico, Fondazione EUCENTRE, Pavia, Italia, 2014-ad oggi • Segretario Generale, Fondazione GEM (Global Earthquake Model), Pavia, Italia, 2009-2013 • Primo Ricercatore, Fondazione EUCENTRE, Pavia, Italia, 2003-2005

ATTIVITÀ DI RICERCA E COORDINAMENTO Autore e co-autore di 276 pubblicazioni scientifiche (elencate in fondo), di cui 67 in riviste

internazionali peer-reviewed, generando circa 4323 citazioni, un h-index pari a 38 ed un i10-index pari a 85 (source: Google Scholar, Maggio 2017), 1998-ad oggi

Coordinatore, Coordinatore Operativo, Responsabile Scientifico, Responsabile Unità di Ricerca, in n.11 progetti nazionali ed internazionali, 2001-2014: - FP7-INFRA-2010-1.1.27: NERA - Network of European Research Infrastructures for

Earthquake Risk Assessment and Migitation - FP7-ENV-2009-1: SYNER-G - Systemic Vulnerability and Risk Analysis for Buildings, Lifeline

Networks and Infrastructures Safety Gain - FP7-ENV-2008-1.3.1.1: SHARE - Development of a Common Methodology and Tools to

Evaluate Earthquake Hazard in Europe


- FP6-Global-1.1.6.3: LESSLOSS - Risk Mitigation for Earthquakes and Landslides - FP6-2002-MOBILITY-5: Preservation of Historic Reinforced Concrete Housing Buildings

Across Europe - FP5-RTN-1.4.1.1.1: SAFERR – Seismic Assessment for Earthquake Risk Reduction - FP5-HPMT-CT-2001: Advanced Training in Earthquake Engineering for Reduction of Seismic

Risk - FIRB-PIATTAFORME-RETI-2006: AIRPLANE - Advancing Interdisciplinary Research Platform

on Volcanoes and Earthquakes - FIRB Internazionalizzazione 2005: Valutazione e Riduzione del Rischio Sismico di Grandi

Opere Infrastrutturali - FIRB-INTERNAZIONALIZZAZIONE-2004: MISS - Master in Ingegneria Sismica e Sismologia - EAC-21-04-MUN: MEEES - Erasmus Mundus Masters in Earthquake Engineering and

Engineering Seismology Segretario Generale di GEM (www.globalquakemodel.org), una Fondazione non-profit pubblico-

privata incaricata dall’Organizzazione per la Cooperazione e Sviluppo Economico (OCSE) di sviluppare un modello di rischio sismico a scala mondiale, 2009-2013

Coordinatore della Sezione Rischio Sismico presso il Centro Europeo per la Formazione e Ricerca in Ingegneria Sismica (Fondazione EUCENTRE, www.eucentre.it), coordinando diversi progetti di ricerca riguardo (i) valutazione del rischio sismico a scala urbana o territoriale e (ii) la valutazione e mitigazione della vulnerabilità delle strutture in cemento armato, 2005-2009

Co-coordinatore della Scuola Europea per la Riduzione del Rischio Sismico (ROSE School, www.roseschool.it), cui programmi di master e dottorato sono diventati un riferimento internazionale nel settore, attraendo studenti da più di 50 paesi, 2001-2009

Co-fondatore e direttore tecnico di Seismosoft (Software Solutions for Earthquake Engineering, www.seismosoft.com), società specializzata nello sviluppo di avanzati programmi di calcolo automatico nell’area dell’Ingegneria Sismica e della Sismologia, distribuiti gratuitamente a decine di migliaia di utilizzatori accademici da più di 80 paesi, 2002-ad oggi

Co-coordinatore di n.2 missioni di studio in zone terremotate: Atene (Grecia, 2000) e Izmit (Turchia, 2001)

Ricercatore Visitatore al Laboratorio Nazionale di Ingegneria Civile a Lisbona (Portogallo), per lo svolgimento di un programma di prove sperimentale su tavola vibrante, 1998

Ricercatore Visitatore Joint Research Centre di Ispra (Italia), per lo svolgimento di un programma di prove pseudo-dinamiche a scala reale, 1999

ATTIVITÀ DIDATTICA IN ITALIA ED ALL’ESTERO Titolare, docente, assistente o relatore in n.18 corsi di laurea e post-laurea (MSc e PhD) presso

Università di Pavia, Università di Bologna, Università di Messina, Università di Roma III, Politecnico di Milano, UME School, Centro Internazionale di Scienze Meccaniche, nelle seguenti materie: Progetto di Strutture, Valutazione della Vulnerabilità Sismica di Strutture ed Infrastrutture, Rinforzo e Adeguamento Sismico di Strutture in Zona Sismica, Analisi Non-Lineare di Strutture, ecc., 2001-ad oggi

Titolare, docente, assistente o relatore in n. 8 corsi di laurea e post-laurea (MSc e PhD) presso Imperial College di Londra, Università di Porto, University College London, nelle seguenti materie: Seismic Design of Reinforced Concrete and Masonry Structures, Assessment and Repair of Earthquake-Damaged Structures, Earthquake Engineering, Design to Structural Eurocodes, ecc., 1997-2007

Organizzatore, coordinatore, docente o relatore in n. 22 corsi di aggiornamento o incontri per professionisti, presso Fondazione Eucentre, Dipartimento della Protezione Civile, Comune di Crotone, Fondazione Vajont, ed Ordini degli Ingegneri di Bologna, Brescia, Catania, Crotone, Firenze, Genova, Imperia, Messina, Napoli, Pavia, Reggio Emilia, Savona, così come presso Lisbona (Portogallo) ed Amman (Giordania), 2003-ad oggi

Relatore di n.42 tesi di laurea nell’ambito dei programmi di laurea in Ingegneria Civile ed in Ingegneria Civile e Architettura presso l’Università di Pavia e l’Imperial College di Londra, 1998-ad oggi


Relatore e correlatore di n.59 tesi di master (MSc) e n.15 tesi di dottorato (PhD) riguardanti argomenti nel campo di ricerca dell’Ingegneria Sismica presso la UME School e l’Imperial College di Londa, 1999-ad oggi

Componente esterno di n.11 Commissioni Esame Dottorato presso la UME School, l’Università di Porto e l’Istituto Superiore Tecnico di Lisbona, a Portogallo

ATTIVITÀ EDITORIALI Direttore Operativo di n.1 rivista nazionale (2008-2011): - Progettazione Sismica Membro del Comitato Editoriale e Revisore di n.3 riviste internazionali (2005-ad oggi):

- Earthquake Spectra - Bulletin of Earthquake Engineering - Soil Dynamics and Earthquake Engineering

Revisore (peer reviewer) di n.27 riviste internazionali (1999-ad oggi): - Disasters - Journal of Engineering Structures - Journal of Earthquake Engineering - Journal of Computers & Structures - Journal of Computational Geosciences - ICE Journal of Structures and Buildings - ASCE Journal of Structural Engineering - Journal of Steel and Composite Structures - Journal of Civil Engineering Management - Journal of Advanced Concrete Technology - Earthquake Engineering and Structural Dynamics - ISET Journal of Earthquake Engineering Technology - Journal of Architectural Heritage: Conservation, Analysis, Restoration - Journal of Earthquake and Tsunami - Earthquakes and Structures - Structural and Multidisciplinary Optimization - Journal of Sound and Vibration - Journal of Performance of Constructed Facilities - Seismological Research Letters - Structures - The Structural Design of Tall and Special Buildings - Earthquake Engineering and Engineering Vibration - Structural Engineering and Mechanics - Advances in Structural Engineering - Advances in Engineering Software - The Open Civil Engineering Journal - Structural Concrete

PREMI E RICONOSCIMENTI • Premio “Carlos Sousa Oliveira”, conferito dall’Associazione Portoghese d’Ingegneria Sismica per

il migliore articolo scientifico di rivista, 2016 • Premio “Carlos Sousa Oliveira”, conferito dall’Associazione Portoghese d’Ingegneria Sismica per

il migliore articolo scientifico di rivista, 2014 • EERI Innovation Award (Premio internazionale per l'Innovazione in Ingegneria Sismica), 2007 • Premio per il migliore articolo sull’ISET Journal, 2000 • Selezionato per il premio ‘IStructE Young Researcher Award’, Regno Unito, 1997 • Relazione ad Invito a n.17 conferenze:

- International Disaster and Risk Conference (IDRC, 2009, Chengdu, China) - 2nd Conference of the OECD International Network on the Financial Management of Large-

scale Catastrophes (Bangkok, Thailand, 2009)


- World Forum of Catastrophe Programmes (Taipei, Taiwan, 2009) - IUA Catastrophe Modelling (London, UK, 2009) - International Conference of Seismology in South-America (Lima, Peru, 2009) - International Workshop on Disaster Risk Reduction (Brussels, Belgium, 2009) - 2nd International Conference on Asian Catastrophe Insurance (Beijing, China, 2009) - 3rd International Disaster and Risk Conference (Davos, Switzerland, 2010) - 12th Ministerial Session of the European and Mediterranean Major Hazards Agreement

(EUR-OPA, Saint Petersburg, Russian Federation, 2010) - AGU Meeting of the Americas (Iguassu, Brazil, 2010) - 23rd Colloquium of African Geology (Johannesburg, South Africa, 2011) - ENHANS International Workshop on Extreme Natural Hazards and Disaster Risk in Africa

(Pretoria, South Africa, 2011) - International Research Workshop on Economics of Natural Disasters (Venice, Italy, 2011) - ESF Research Conference on Understanding Extreme Geohazards (Sant Feliu de Guixols,

Spain, 2011) - IRDR Conference (Beijing, China, 2011) - 10th International Conference on Credit Risk Evaluation (Venice, Italy, 2011)

• Relazione Keynote a n.5 conferenze: - Relazione Keynote al XX Convegno Regionale Europeo in Ingegneria Sismica, Sion, Svizzera,

2001 - Relazione Keynote al VII Convegno Nazionale di Ingegneria Sismica e Sismologia in

Portogallo, 2007 - Relazione Keynote al XVI Convegno Nazionale di Ingegneria Civile in Peru, 2007 - Relazione Keynote al V Convegno Nazionale di Ingegneria Strutturale in Portogallo, 2014 - Relazione Keynote al VII Convegno Nazionale di Ingegneria Civile in Giordania, 2017

ALTRI TITOLI • Iscritto all’albo dell’Ordine degli Ingegneri di Portogallo, 1996-ad oggi • Membro della Society of Earthquake and Civil Engineering Dynamics, Regno Unito, 1996-ad

oggi • Membro della European Association for Earthquake Engineering (EAEE), 2003-ad oggi • Membro del Earthquake Engineering Research Institute (EERI), California, 2008-ad oggi • Membro Commissione Grandi Rischi (2012) • Membro EPOS Advisory Board (2011-2012) • Membro SIGMA Project Seismic Hazard Analysis Review Panel (2010-2012) • Revisore per agenzie di finanziamento della ricerca; Commissione Europea (DG Research),

European Science Foundation, MiUR ELENCO PUBBLICAZIONI

Riviste internazionali

1. Elnashai A.S., Pinho R. (1998) “Repair and retrofitting of RC walls using selective techniques,” Journal of Earthquake Engineering, Vol.2, No.4, pp. 525-568.

2. Pinho R., Elnashai A.S. (2000) “Dynamic collapse testing of a full-scale four storey RC frame,” ISET Journal of Earthquake Engineering, Special Issue on Experimental Techniques, Vol. 37, No. 4, pp. 143-164.

3. Pinho R. (2000) “Shaking table testing of RC walls,” ISET Journal of Earthquake Engineering, Special Issue on Experimental Techniques, Vol. 37, No. 4, pp. 119-142.

4. Glaister S., Pinho R. (2003) “Development of a simplified deformation-based method for seismic vulnerability assessment,” Journal of Earthquake Engineering, Vol. 7, Special Issue 1, pp. 107-140.


5. Antoniou S., Pinho R. (2004) “Advantages and limitations of adaptive and non adaptive force-based pushover procedures,” Journal of Earthquake Engineering, Vol. 8, No 4, pp. 497-522.

6. Antoniou S., Pinho R. (2004) “Development and verification of a displacement-based adaptive pushover procedure,” Journal of Earthquake Engineering, Vol. 8, No. 5, pp. 643-661.

7. Crowley H., Pinho R., Bommer J.J. (2004) “A probabilistic displacement-based vulnerability assessment procedure for earthquake loss estimation,” Bulletin of Earthquake Engineering, Vol. 2, No. 2, pp. 173-219.

8. Crowley H., Pinho R. (2004) “Period-height relationship for existing European reinforced concrete buildings,” Journal of Earthquake Engineering, Vol. 8, Special Issue 1, pp. 93-120.

9. Bird J.F., Crowley H., Pinho R., Bommer J.J. (2005) “Assessment of building response to liquefaction-induced differential ground deformation,” Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 38, No. 4, pp. 215-234.

10. Crowley H., Bommer J.J., Pinho R., Bird J.F. (2005) “The impact of epistemic uncertainty on an earthquake loss model,” Earthquake Engineering and Structural Dynamics. Vol. 34, No. 14, pp. 1653-1685.

11. Rota M., Pecker A., Bolognini D., Pinho R. (2005) “A methodology for seismic vulnerability of masonry arch bridge walls,” Journal of Earthquake Engineering, Vol. 9, Special Issue 2, pp. 331-353.

12. Bird J.F., Bommer J.J., Crowley H., Pinho R. (2006) “Modelling liquefaction-induced building damage in earthquake loss estimation,” Soil Dynamics and Earthquake Engineering, Vol. 26, No. 1, pp. 15-30.

13. Bommer J.J., Pinho R. (2006) “Adapting earthquake actions in Eurocode 8 for performance-based design,” Earthquake Engineering and Structural Dynamics, Vol. 35, No. 1, pp. 39-55.

14. Calvi G.M., Pinho R., Magenes G., Bommer J.J., Restrepo-Vèlez L.F., Crowley H. (2006) “The development of seismic vulnerability assessment methodologies for variable geographical scales over the past 30 years,” ISET Journal of Earthquake Engineering Technology, Vol. 43, No. 3, pp. 75-104.

15. Casarotti C., Pinho R. (2006) “Seismic response of continuous span bridges through fibre-based finite element analysis,” Journal of Earthquake Engineering and Engineering Vibration, Vol. 5, No. 1, pp. 119-131.

16. Casarotti C., Pinho R. (2007) “An adaptive capacity spectrum method for assessment of bridges subjected to earthquake action,” Bulletin of Earthquake Engineering, Vol. 5, No. 3, pp. 377-390.

17. Ceresa P., Petrini L., Pinho R. (2007) “Flexure-shear fibre beam-column elements for modelling frame structures under seismic loading - state of the art,” Journal of Earthquake Engineering, Vol. 11, Special No. 1, pp. 46-88.

18. Gavridou S., Pinho R., Crowley H., Calvi G.M., Montaldo V., Meletti C., Stucchi M. (2007) “Preliminary study on the impact of the introduction of an updated seismic hazard model for Italy,” Journal of Earthquake Engineering, Vol. 11, Special Issue 1, pp. 89-118.

19. Grant D.N., Bommer J.J., Pinho R., Calvi G.M., Goretti A., Meroni F. (2007) “A prioritization scheme for seismic intervention in school buildings in Italy,” Earthquake Spectra, Vol. 23, No. 2, pp. 291-314.

20. Pinho R., Casarotti C., Antoniou S. (2007) “A comparison of single-run pushover analysis techniques for seismic assessment of bridges,” Earthquake Engineering and Structural Dynamics, Vol. 36, No. 10, pp. 1347–1362.

21. Bal I., Crowley H., Pinho R. (2008) “Displacement-based earthquake loss assessment for an earthquake scenario in Istanbul,” Journal of Earthquake Engineering, Vol. 12, Special Issue 2, pp. 12–22.

22. Bal I., Crowley H., Pinho R., Gulay F. (2008) “Detailed assessment of structural characteristics of Turkish RC building stock for loss assessment models,” Soil Dynamics and Earthquake Engineering, Vol. 28, No. 10-11, pp. 914–932.


23. Borzi B., Pinho R., Crowley H. (2008) “Simplified pushover-based vulnerability analysis for large scale assessment of RC buildings,” Engineering Structures, Vol. 30, No. 3, pp. 804-820.

24. Borzi B., Crowley H., Pinho R. (2008) “Simplified pushover-based earthquake loss assessment (SP-BELA) method for masonry buildings,” International Journal of Architectural Heritage, Vol. 2, No. 4, pp. 353-376.

25. Colombi M., Borzi B., Crowley H., Onida M., Meroni F., Pinho R. (2008) “Deriving vulnerability curves using Italian earthquake damage data,” Bulletin of Earthquake Engineering, Vol. 6, No. 3, pp. 485-504.

26. Crowley H., Borzi B., Pinho R., Colombi M., Onida M. (2008) “Comparison of two mechanics-based methods for simplified structural analysis in vulnerability assessment,” Advances in Civil Engineering, Vol. 2008, Issue Q2, pp. 1-19.

27. Pinho R., Crowley H. (2008), “Using basic principles of mechanics of materials to assess the seismic risk of entire countries,” Environmental Semeiotics, Vol. 1, No. 1, pp. 1-19.

28. Casarotti C., Monteiro R., Pinho R. (2009) “Verification of spectral reduction factors for seismic assessment of bridges,” Bulletin of New Zealand Society for Earthquake Engineering, Vol. 42, No. 2.

29. Crowley H., Colombi M., Borzi B., Faravelli M., Onida M., Lopez M., Polli D., Meroni F., Pinho R. (2009) “A comparison of seismic risk maps for Italy,” Bulleting of Earthquake Engineering, Vol. 7, No. 1, 149-180.

30. Ceresa P., Petrini L., Pinho R., Sousa R. (2009) “A fibre flexure-shear model for seismic analysis of RC framed structures,” Earthquake Engineering and Structural Dynamics, Vol. 38, pp. 565–586.

31. Ferracuti B., Pinho R., Savoia M., Francia R. (2009) “Verification of Displacement-based Adaptive Pushover through multi-ground motion incremental dynamic analyses,” Engineering Structures, Vol. 31, pp. 1789-1799.

32. Pinho R., Monteiro R., Casarotti C., Delgado R. (2009) “Assessment of continuous span bridges through Nonlinear Static Procedures,” Earthquake Spectra, Vol. 25, No. 1, pp. 143-159.

33. Ahmad N., Crowley H., Pinho R., Ali Q. (2010) “Displacement-based earthquake loss assessment of masonry buildings in Mansehra City, Pakistan,” Journal of Earthquake Engineering, Vol. 14, Special Issue 1, pp. 1-37.

34. Calabrese A., Almeida J.P., Pinho R. (2010) “Numerical issues in distributed inelasticity modelling of RC frame elements for seismic analysis,” Journal of Earthquake Engineering, Vol. 14, pp. 38-68.

35. Colombi M., Crowley H., Di Capua G., Peppoloni S., Borzi B., Pinho R., Calvi G.M. (2010) “Mappe di rischio sismico a scala nazionale con dati aggiornati sulla pericolosità sismica di base locale,” Progettazione Sismica, Vol. 2, No. 1, pp. 93-112.

36. Crowley H., Pinho R. (2010) “Revisiting Eurocode 8 formulae for periods of vibration and their employment in linear seismic analysis,” Earthquake Engineering and Structural Dynamics, Vol. 39, pp. 223-235.

37. Bal I.E., Bommer J.J., Stafford P.J., Crowley H., Pinho R. (2010) “The influence of geographical resolution of urban exposure data in an earthquake loss model for Istanbul,” Earthquake Spectra, Vol. 26, No. 3.

38. Bento R., Bhatt C, Pinho R. (2010) “Using Nonlinear Static Procedures for seismic assessment of the 3D irregular SPEAR building,” Earthquake and Structures, Vol. 1, No. 2.

39. Teramo M.S., Crowley H., Cultrera G., Cirella A., Pinho R. (2010) “Valutazione del rischio sismico per la città diMessina, un approccio ad albero logico,” Progettazione Sismica, Vol. 2, No. 2, pp. 95-116.

40. Calvi G.M., Moratti M., Villani A., Pietra D., Pinho R. (2011) “Progettazione sismica di un ponte strallato di grande luce: il SouthCrossing Bridge in Guayaquil, Ecuador,” Progettazione Sismica, Vol. 3, No. 1, pp. 45-85.


41. Smyrou E., Blandon C., Antoniou S., Pinho R., Crisafulli F. (2011) “Implementation and verification of a masonry panel model for nonlinear dynamic analysis of infilled RC frames,” Bulletin of Earthquake Engineering, Vol. 9, No. 5, pp. 1519–1534.

42. Ceresa P., Brezzi F., Calvi G.M., Pinho R. (2012) “Analytical modelling of a large-scale dynamic testing facility, ” Earthquake Engineering and Structural Dynamics, Volume 41, No. 2, pp. 255–277.

43. Tarque N., Crowley H., Pinho R., Varum H. (2012) “Displacement-based fragility curves for seismic assessment of adobe buildings in Cusco, Peru,” Earthquake Spectra, Vol. 28, No. 2, pp. 759–794.

44. Almeida J.P., Das S., Pinho R. (2012) “Adaptive force-based frame element for regularized softening response,” Computers and Structures, Vol. 102–103, pp. 1-13.

45. Nascimbene R., Fagà E., Cigada A., Vanali M., Moratti M., Pinho R., Calvi G.M. (2012) “Realizzazione di un ponteggiometallico per la Gran Guglia del Duomo di Milano: analisi, modellazione, verifica ed identificazione dinamica,” Progettazione Sismica, Vol. 4, No. 1, pp. 11-30.

46. Pinho R. (2012) “Discussion of Comparison of base shears estimated from floor accelerations and column shears,” Earthquake Spectra, Vol. 28, No. 2, pp. 831–832.

47. Stucchi M., Meletti C., Bazzurro P., Camassi R., Crowley H., Pagani M., Pinho R., Calvi G.M. (2012) “The earthquakes of May 2012 and the seismic hazard of the area: was there any underestimation?,” Progettazione Sismica, Vol. 5, No. 3, pp. 63-73.

48. Silva V., Crowley H., Pinho R., Varum H. (2013) “Extending displacement-based earthquake loss assessment (DBELA) for the computation of fragility curves,” Engineering Structures, Vol. 56, pp. 343–356.

49. Correia A.A., Almeida J.P., Pinho R. (2013) “Seismic energy dissipation in inelastic frames: understanding state-of-the-practice damping models,” Structural Engineering International, Issue 2013/2, pp. 148-158.

50. Pinho R., Marques M., Monteiro R., Casarotti C., Delgado R. (2013) “Evaluation of Nonlinear Static Procedures in the assessment of building frames,” Earthquake Spectra, Volume 29, No. 4, pp. 1459-1476.

51. Borzi B., Masi A., Pinho R., Pola D., Vona M. (2013) “Seismic performance evaluation of RC frame buildings based in simplified and nonlinear dynamic analyses,” Earthquake and Structures, Vol. 4, No. 3, pp. 157-179.

52. Silva S., Crowley H., Pagani M., Monelli D., Pinho R. (2014) “Development of the OpenQuake engine, the Global Earthquake Model’s open-source software for seismic risk assessment,” Natural Hazards, Vol. 72, No. 3, pp. 1409-1427.

53. Silva V., Crowley H., Varum H., Pinho R., Sousa R. (2014) “Evaluation of analytical methodologies used to derive vulnerability functions,” Earthquake Engineering and Structural Dynamics, Vol. 43, pp. 181–204.

54. Ahmad N., Ali Q., Crowley H., Pinho R. (2014) “Earthquake loss estimation of residential buildings in Pakistan,” Natural Hazards, Vol. 73, pp. 1889–1955.

55. Monteiro R., Marques M., Adhikari G., Casarotti C., Pinho R. (2014) “Spectral reduction factors evaluation for seismic assessment of frame buildings,” Engineering Structures, Vol. 77, pp. 129–142.

56. Silva V., Crowley H., Varum H., Pinho R. (2015) “Seismic Risk Assessment for mainland Portugal,” Bulletin of Earthquake Engineering, Vol. 13, No. 2, pp. 429-457.

57. Silva V., Crowley H., Varum H., Pinho R. (2015) “Investigation of the characteristics of the Portuguese RC building stock and development of a vulnerability model,” Bulletin of Earthquake Engineering, Vol. 13, No. 5, pp. 1455-1490.

58. Correia A.A., Almeida J.P., Pinho R. (2015) “Force-based higher-order beam element with flexural-shear-torsional interaction in 3D frames. Part I: Theory,” Engineering Structures, Vol. 89, pp. 204–217.

59. Almeida J.P., Correia A.A., Pinho R. (2015) “Force-based higher-order beam element with flexural-shear-torsional interaction in 3D frames. Part II: Applications,” Engineering Structures, Vol. 89, pp. 218–235.


60. Bommer J.J., Crowley H., Pinho R. (2015) “A risk-mitigation approach to the management of induced seismicity,” Journal of Seismology, Vol. 19, pp. 623–646.

61. Casotto C., Silva V., Crowley H., Nascimbene R., Pinho R. (2015) “Seismic fragility of Italian RC precast industrial structures,” Engineering Structures, Vol. 94, pp. 122-136.

62. Monteiro R., Delgado R., Pinho R. (2016) “Probabilistic seismic assessment of RC bridges: Part I — Uncertainty models,” Structures, Vol. 5, pp. 274–283.

63. Monteiro R., Delgado R., Pinho R. (2016) “Probabilistic seismic assessment of RC bridges: Part II — Nonlinear demand prediction,” Structures, Vol. 5, pp. 274–283.

64. Stucchi M., Pinho R., Cocco M. (2016) “After the L’Aquila Trial,” Seismological Research Letters, Opinion Paper, Vol. 87, N. 3, pp. 591-595.

65. Zelaschi C., Monteiro R., Pinho R. (2016) “Parametric characterization of RC bridges for seismic assessment purposes,” Structures, Vol. 7, pp. 14-24.

66. Sousa R., Correia A.A., Almeida J.P., Pinho R. (2016) “Numerical modelling of bond-slip effects in reinforced concrete elements,” Revista Portuguesa de Engenharia Estrutural, Vo. 3, N. 2, pp. 33-41. (in Portuguese)

67. Crowley H., Polidoro B., Pinho R., van Elk J. (2017) “Framework for Developing Fragility and Consequence Models for Local Personal Risk,” Earthquake Spectra, in press.

Libri

68. Petrini L., Pinho R., Calvi G.M. (2004) Criteri di Progettazione Antisismica, IUSS Press, Pavia, Italy.

69. Manfredi G., Masi A., Pinho R., Verderame G., Vona M. (2007) Valutazione di Edifici Esistenti in Cemento Armato, IUSS Press, Pavia, Italy.

70. Bento R., Pinho R. (Eds.) (2008) Nonlinear Static Methods for Design/Assessment of 3D Structures, IST Press, Lisbon, Portugal.

Capitoli in libri

71. Tsujii M., Elnashai A.S., Pinho, R. (2001) “Analytical investigation of the behaviour of composite beams with shear connectors, Section 3.9,” in Seismic Behaviour and Design of Composite Steel Concrete Structures, ECOEST2/ICONS Report 4, A. Plumier, C. Doneux (Eds.), LNEC, Lisbon, Portugal.

72. Elnashai A.S., Pinho R. (2001) “Selective intervention methods for seismic strengthening and repair, Chapter 1,” in Seismic Assessment, Strengthening and Repair of Structures, ECOEST2/ICONS Report 2, E.C. Carvalho, E. Coelho (Eds.), LNEC, Lisbon, Portugal.

73. Elnashai A.S., Pinho R. (2001) “Assessment of selective techniques under dynamic loading, Chapter 2,” in Seismic Assessment, Strengthening and Repair of Structures, ECOEST2/ICONS Report 2, E.C. Carvalho, E. Coelho (Eds.), LNEC, Lisbon, Portugal.

74. Elnashai A.S., Pinho R. (2001) “Verification of selective intervention methods on a full-scale structure, Chapter 5,” in Seismic Assessment, Strengthening and Repair of Structures, ECOEST2/ICONS Report 2, E.C. Carvalho, E. Coelho (Eds.), LNEC, Lisbon, Portugal.

75. Lopez M., Bommer J.J., Pinho R. (2004) “Seismic hazard assessments, seismic design codes and earthquake engineering in El Salvador,” in Natural Hazards in El Salvador, W.I. Rose, J.J. Bommer, D.L. López, M.J. Carr, J.J. Major (Eds.), GSA Press, Boulder Colorado, USA.

76. Bommer J.J., Pinho R., Crowley H. (2005) “Using a displacement-based approach for earthquake loss assessment,” in Advances in Earthquake Engineering for Urban Risk Reduction, S.T. Wasti, G. Ozcebe (Eds.), Springer, Dordrecht, The Netherlands.

77. Calvi G.M, Casarotti C., Pinho R. (2005) “A preliminary comparative study of force, displacement and pushover-based approaches for seismic design of continuous span bridges,” in Advances in Earthquake Engineering for Urban Risk Reduction, S.T. Wasti, G. Ozcebe (Eds.), Springer, Dordrecht, The Netherlands.

78. Pinho R., Antoniou S., Casarotti C., Lopez M. (2005) “A displacement-based adaptive pushover algorithm for assessment of buildings and bridges,” in Advances in Earthquake


Engineering for Urban Risk Reduction, S.T. Wasti, G. Ozcebe (Eds.), Springer, Dordrecht, The Netherlands.

79. Petrini L., Pinho R. (2006) “La verifica sismica degli edifici esistenti in cemento armato,” in Norme Tecniche per le Costruzioni – Analisi e commento del D.M. 14 settembre 2005, D. Guzzoni (Ed.), Il Sole 24Ore, Italy.

80. Pinho R. (2007) “Nonlinear dynamic analysis of structures subjected to seismic action,” in Advanced Earthquake Engineering Analysis, A. Pecker (Ed.), CISM-Springer Verlag, Udine, Italy.

81. Pinho R. (2007) “Using pushover analysis for assessment of buildings and bridges,” in Advanced Earthquake Engineering Analysis, A. Pecker (Ed.), CISM-Springer Verlag, Udine, Italy.

82. Fragiadakis M., Pinho R., Antoniou S. (2008) “Modelling inelastic buckling of reinforcing bars under earthquake loading,” in Progress in Computational Dynamics and Earthquake Engineering, M. Papadrakakis, D.C. Charmpis, N.D. Lagaros and Y. Tsompanakis (Eds.), A.A. Balkema Publishers – Taylor & Francis, The Netherlands.

83. Calvi G.M., Pinho R., Magenes G. (2009) “Traditional and innovative methods for seismic vulnerability assessment at large geographical scales,” in The 1755 Lisbon earthquake: revisited, L.A. Mendes-Victor, C.S. Sousa Oliveira C.S., J. Azevedo, A. Ribeiro (Eds.), Springer, Dordrecht, The Netherlands.

84. Crowley H., Pinho R. (2011) “Global Earthquake Model: Community-based seismic risk assessment,” in Protection of Built Environment Against Earthquakes, M. Dolšek (Ed.), Springer, Dordrecht, The Netherlands.

85. Saiid Saiidi M., Arêde A., Cardone D., Delgado P., Dolce M., Fischinger M., Isaković T., Pantazopoulou S., Pekcan G., Pinho R., Sextos A. (2012) “Modelling of bridges for inelastic analysis,” in Seismic Design and Assessment of Bridges, A.J. Kappos, M. Saiid Saiidi, M.N. Aydınoğlu, T. Isaković (Eds.), Springer, Dordrecht, The Netherlands.

86. Aydınoğlu M.N., Fischinger M., Isaković T., Kappos A.J., Pinho R. (2012) “Methods for inelastic analysis of bridges,” in Seismic Design and Assessment of Bridges, A.J. Kappos, M. Saiid Saiidi, M.N. Aydınoğlu, T. Isaković (Eds.), Springer, Dordrecht, The Netherlands.

87. Isaković T., Arêde A., Cardone D., Delgado P., Fischinger M., Kappos A.J., Pouca N.V., Pinho R., Sextos A. (2012) “Case studies and comparative evaluation of methods,” in Seismic Design and Assessment of Bridges, A.J. Kappos, M. Saiid Saiidi, M.N. Aydınoğlu, T. Isaković (Eds.), Springer, Dordrecht, The Netherlands.

88. Crowley H., Pinho R., Pagani M., Keller N. (2013) “Assessing global earthquake risks: the Global Earthquake Model (GEM) initiative,” in Handbook of Seismic Risk Analysis and Management of Civil Infrastructure Systems, S. Tesfamariam, K. Goda (Eds.), Woodhead Publishing, Sawston, Cambridge, UK.

89. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2013) "An innovative deep foundation macro-element model for seismic analysis of pile/column supports," in Advances in Soil Mechanics and Geotechnical, Y.J. Cui, F. Emeriault, F. Cuira, S. Ghabezloo, J.M. Pereira, M. Reboul, H. Ravel, A.M. Tang, Paris, France.

Reports

90. Elnashai A.S., Pinho R (1997) “Repair and strengthening of RC walls using selective techniques,” Research Report ESEE-97/1, Engineering Seismology and Earthquake Engineering Section, Imperial College, London, UK.

91. Pinho R., Elnashai A.S. (1999) “Analytical assessment of multi-storey RC frame before and after repair,” Research Report ICONS Topic 2, Imperial College, London, UK.

92. Pinto A.V., Verzeletti G., Molina J., Varum H., Pinho R and Coelho E. (2002) “Pseudo-dynamic tests on non-seismic resisting RC frames (bare and selective retrofit frames),” Research Report EUR 20244 EN, Joint Research Centre, Ispra, Italy.

93. Sullivan T., Pinho R., Pavese A. (2004) “An introduction to structural testing techniques in earthquake engineering,” Educational Report ROSE-2004/01, IUSS Press, Pavia, Italy.


94. Calvi G.M., Pinho R. (2004) “LESSLOSS – A European Integrated Project on risk mitigation for earthquakes and landslides,” Research Report ROSE-2004/02, IUSS Press, Pavia, Italy.

95. Miranda P., Calvi G.M., Pinho R., Priestley M.J.N. (2005) “Displacement-based seismic assessment of R/C columns with limited shear resistance,” Research Report ROSE-2005/04, IUSS Press, Pavia, Italy.

96. Casarotti C., Pinho R., Calvi G.M. (2005) “Adaptive pushover-based methods for seismic assessment and design of bridge structures,” Research Report ROSE-2005/06, IUSS Press, Pavia, Italy.

97. Crowley H., Pinho R., Bommer J.J., Bird J. (2006) “Development of a displacement-based method for earthquake loss assessment,” Research Report ROSE-2006/01, IUSS Press, Pavia, Italy.

98. Grant D.N., Bommer J.J., Pinho R., Calvi G.M. (2006) “Defining priorities and timescales for seismic intervention in school buildings in Italy,” Research Report ROSE-2006/03, IUSS Press, Pavia, Italy.

99. Bal I.E., Crowley H., Pinho R., Gulay F.G. (2007) “Structural characteristics of Turkish RC building stock in Northern Marmara Region for loss assessment applications,” Research Report ROSE-2007/03, IUSS Press, Pavia, Italy.

100. Pietra D., Calvi G.M., Pinho R. (2008) “Displacement-based seismic design of isolated bridges,” Research Report ROSE-2008/01, IUSS Press, Pavia, Italy.

101. Ceresa P., Petrini L., Pinho R. (2008) “A fibre flexure-shear model for cyclic nonlinear behaviour of RC structural elements,” Research Report ROSE-2008/07, IUSS Press, Pavia, Italy.

102. Rivera J.A., Pinho R. (2009) “On the development of seismic design forces for flexible floor diaphragms in reinforced concrete wall buildings,” Research Report ROSE-2009/03, IUSS Press, Pavia, Italy.

103. Adhikari G., Pinho R. (2010) “Development and application of Nonlinear Static Procedures for plan-asymmetric buildings,” Research Report ROSE-2010/01, IUSS Press, Pavia, Italy.

104. Bal I.E, Crowley H., Pinho R. (2010) “Displacement-based earthquake loss assessment: method development and application to Turkish building stock,” Research Report ROSE-2010/02, IUSS Press, Pavia, Italy.

105. Broglio S., Crowley H., Pinho R. (2013) “Bayesian Network Framework for Macro-Scale Seismic-Risk Assessment and Decision Support for Bridges,” Research Report UME 2013/02, IUSS Press, Pavia, Italy.

Atti di convegni internazionali

106. Elnashai A.S., Pinho R. (1998) “Current status and future developments for repair and strengthening of RC structures in European seismic design practice,” Proceedings of the 11th European Conference on Earthquake Engineering, Paris, France.

107. Goodfellow R., Pinho R., Salama A., Hancock M. (1999) “Applications of fuse inserts in seismic design of reinforced concrete structures,” Proceedings of the 2nd Conference on Earthquake Resistant Engineering Structures, Catania, Italy.

108. Pinho R., Elnashai A.S., Vaz C.T. (2000) “Experimental observations from shaking-table tests on selective techniques for repair and strengthening of RC walls,” Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 2245.

109. Pinho R. (2001) “Seismic assessment and upgrading of reinforced concrete buildings,” Proceedings of the 20th European Regional Earthquake Engineering Seminar, Institut Universitaire Kurt Bösch, Sion, Switzerland.

110. Antoniou S., Rovithakis A., Pinho R. (2002) “Development and verification of a fully adaptive pushover procedure,” Proceedings of the 12th European Conference on Earthquake Engineering, London, UK, Paper No. 822.


111. Pinho R., Bommer J.J., Glaister S. (2002) “A simplified approach to displacement-based earthquake loss estimation analysis,” Proceedings of the 12th European Conference on Earthquake Engineering, London, London, UK, Paper No. 738.

112. Crowley H., Bommer J.J., Pinho R. (2004) “Displacement-based earthquake loss assessment (DBELA),” Proceedings of the 20th General Assembly of the European Seismological Commission, Potsdam, Germany.

113. Delgado P., Costa A., Pinho R., Delgado R. (2004) “Different strategies for seismic assessment of bridges – comparative study,” Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper no. 1609.

114. Pinho R. (2004) “Performance and displacement-based earthquake loss estimation of urban areas,” Proceedings of the International Workshop on Performance-Based Seismic Design (PBSD) - Concepts and Implementation, Bled, Slovenia.

115. Bommer J.J., Pinho R., Crowley H. (2005) “Using displacement-based earthquake loss assessment in the selection of seismic code design levels,” Proceedings of the 9th International Conference on Structural Safety and Reliability (ICOSSAR05), Rome, Italy.

116. Bostenaru-Dan M., Pinho R. (2005) “Assessment criteria for historic reinforced concrete housing buildings in Europe,” Proceedings of the International Conference on Earthquake Engineering - IZIIS 40 EE-21C, Skopje/Ohrid, Macedonia, Paper no. E190.

117. Calvi G.M., Magenes G., Pinho R. (2005) “Displacement based methods to predict earthquake damage at variable geographical scales,” Proceedings of the International Conference on the 250th Anniversary of the 1755 Lisbon Earthquake, Lisbon, Portugal.

118. Pinho R., Antoniou S. (2005) “A displacement-based adaptive pushover algorithm for assessment of vertically irregular frames,” Proceedings of the 4th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Thessaloniki, Greece.

119. Angel J.P., Pinho R., Crowley H. (2006) “Verification of some Eurocode 8 rules for simplified analysis of structures,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1090.

120. Bal I., Crowley H., Pinho R., Gulay F. (2006) “Structural characterisation of Turkish RC building stock for loss assessment applications,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 603.

121. Bommer J.J., Pinho R., Spence R. (2006) “Earthquake loss estimation models: time to open the black boxes?” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 834.

122. Bostenaru-Dan M., Pinho R. (2006) “CA’REDIVIVUS: A project on the preservation of European historic reinforced concrete housing buildings – The concept,” Proceedings of the Eighth US National Conference on Earthquake Engineering, San Francisco, USA, Paper no. 197.

123. Bostenaru-Dan M., Pinho R. (2006) “Challenges to historic reinforced concrete housing architecture in earthquake prone areas,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 457.

124. Calvi G.M., Pinho R., Crowley H. (2006) “State-of-the-knowledge on the period elongation of RC buildings during strong ground shaking,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1535.

125. Casarotti C., Calvi G.M., Pinho R. (2006) “An Adaptive Capacity Spectrum Method for assessment of bridges subjected to earthquake action,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 511.

126. Casarotti C., Pinho R. (2006) “Application of an adaptive version of the capacity spectrum method to seismic design and assessment of bridges,” Proceedings of the 8th US National Conference on Earthquake Engineering, San Francisco, USA, Paper no. 1934.

127. Ceresa P., Petrini L., Pinho R., Auricchio F. (2006) “Flexure-shear fibre beam-column element for modelling of structures under seismic loading,” Proceedings of the 1st European


Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1425.

128. Crowley H., Pinho R. (2006) “Simplified equations for estimation of period of vibration of existing buildings,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 1122.

129. Ferracuti B., Savoia M., Pinho R., Francia R. (2006) “Pushover analyses of FRP retrofitted RC frames,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 862.

130. Ferracuti B., Savoia M., Pinho R., Francia R. (2006) “Assessment of adaptive pushover procedures by dynamic analysis,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 863.

131. Meireles H.A., Pinho R., Bento R., Antoniou S. (2006) “Verification of an adaptive pushover technique for the 3D case,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 619.

132. Pietra D., Pinho R., Antoniou S. (2006) “Verification of displacement-based adaptive pushover for seismic assessment of high-rise steel buildings,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 956.

133. Pinho R., Antoniou S., Pietra D. (2006) “A displacement-based adaptive pushover for seismic assessment of steel and reinforced concrete buildings,” Proceedings of the 8th US National Conference on Earthquake Engineering, San Francisco, USA, Paper no. 1701.

134. Quaglini L., Pinho R. (2006) “Fibre modelling simulation of the response of a 7-storey full-scale building slice tested under dynamic conditions,” Proceedings of the UCSD, PCA & NEES Blind Prediction Contest, San Diego, California, USA.

135. Smyrou E., Blandon-Uribe C., Antoniou S., Pinho R., Crowley H. (2006) “Implementation and verification of a masonry panel model for nonlinear dynamic analysis of for infilled RC frames,” Proceedings of the 1st European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, Paper no. 355.

136. Bal I.E., Crowley H., Pinho R. (2007) “Displacement-based earthquake loss assessment for an earthquake scenario in Istanbul,” Proceedings of the International Symposium on Earthquake Loss Estimation for Turkey (HAZTURK-2007), Istanbul, Turkey.

137. Ferracuti B., Pinho R., Savoia M., Francia R. (2007) “Validation of nonlinear pushover analyses by Statistical Incremental Dynamic Analysis (S-IDA),” Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2007), Crete, Greece.

138. Ferracuti B., Savoia M., Pinho R., Francia R., Antoniou S. (2007) “Pushover analysis of FRP-retrofitted existing RC frame structures,” Proceedings of the 8th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Patras, Greece.

139. Fragiadakis M., Pinho R., Antoniou S. (2007) “Modelling inelastic buckling of reinforcing bars under earthquake loading,” Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2007), Crete, Greece.

140. Gencturk B., Kilic S.A., Erdik M.O., Pinho R. (2007) “Assessment of stone arch bridges under static loading using analytical techniques,” Proceedings of the 2007 ASCE Structures Conference, Long Beach, California, USA.

141. Pinho R., Bommer J.J. (2007) “Sensitivity and uncertainty in earthquake loss models: a case for open-source software,” Proceedings of the 1st International Workshop on Open-source Risk Software, California Institute of Technology, Pasadena, California, USA.

142. Pinho R., Casarotti C., Monteiro R. (2007) “An adaptive capacity spectrum method and other nonlinear static procedures applied to the seismic assessment of bridges,” Proceedings of the 1st US-Italy Workshop on Seismic Design and Assessment of Bridges, Pavia, Italy.


143. Albini P., Meroni F., Pinho R. (2008) “The 1667 earthquake damage in the town of Ragusa (today Dubrovnik, Croatia),” Proceedings of the 31st General Assembly of the European Seismological Commission, Crete.

144. Bal I.E., Crowley H., Pinho R. (2008) “Earthquake Loss Assessment for Istanbul,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 10-0036.

145. Bal I.E., Crowley H., Pinho R. (2008) “Development of a displacement-based earthquake loss assessment method for Turkish buildings,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05-04-0044.

146. Bento R., Pinho R., Bhatt C. (2008) “Seismic assessment of the 3D irregular SPEAR building using different Nonlinear Static Procedures,” Proceedings of the 5th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Catania, Italy, Paper no. 55.

147. Bento R., Pinho R., Bhatt C. (2008) “Nonlinear Static Procedures for the seismic assessment of the 3D irregular SPEAR building,” Proceedings of the Workshop on Nonlinear Static Methods for Design/Assessment of 3D Structures, Lisbon, Portugal.

148. Bolognini D., Borzi B., Pinho R. (2008) “Simplified pushover-based vulnerability analysis of traditional Italian RC precast structures,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09-01-0133.

149. Borzi B., Crowley H., Pinho R. (2008) “The influence of infill panels on vulnerability curves for RC buildings,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09-01-0111.

150. Borzi B., Pola D., Vona M., Pinho R., Masi A. (2008) “An extensive validation exercise on simplified methods for the seismic performance evaluation of RC frame buildings,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09-01-0112.

151. Ceresa P., Petrini L., Pinho R. (2008) “Cyclic nonlinear behaviour of reinforced concrete planar frames accounting for flexure-shear interaction,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 14-0165.

152. Ceresa P., Petrini L., Pinho R., Auricchio F. (2008) “Development of a Fibre Flexure-Shear Model for Seismic Analysis of RC Framed Structures,” Minisymposium on Computational Methods for Seismic Analysis and Design, WCMM8 and ECCOMAS 2008, Venice, Italy (reference No. 2068)

153. Correia A.A., Almeida J.P., Pinho R. (2008) “Force-based versus displacement-based formulations in the cyclic nonlinear analysis of reinforced concrete frames,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 14-0164.

154. Almeida J.P., Correia A.A., Pinho R. (2008) “Development of a 3D force-based beam element for nonlinear analysis of RC frame structures considering flexure-shear coupling,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 14-0166.

155. Crowley H., Colombi M., Calvi G.M., Pinho R., Meroni F. (2008) “Application of a prioritization scheme for seismic intervention in school buildings in Italy,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 09-01-0097.

156. Málaga-Chuquitaype C., Pinho R., Bommer J.J. (2008) “Selection and scaling of ground-motion records for nonlinear response-history analyses based on equivalent SDOF systems,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05-01-0064.

157. Monteiro R., Casarotti C., Pinho R. (2008) “Using Nonlinear Static Procedures for seismic assessment of irregular viaducts,” Proceedings of the 5th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Catania, Italy, Paper no. 22.

158. Pavan A., Pinho R. (2008) “Blind prediction of the response of a full-scale 3D steel frame tested under dynamic conditions,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. S17-01-009.


159. Pinho R., Bento R., Bhatt C. (2008) “Assessing the 3D irregular SPEAR building with Nonlinear Static Procedures,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05-01-0158.

160. Pinho R., Bhatt C., Antoniou S., Bento R. (2008) “Modelling of the horizontal slab of a 3D irregular building for nonlinear static assessment,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 05-01-0159.

161. Pinho R., Crowley H., Bommer J.J. (2008) “Open-source software and treatment of epistemic uncertainties in earthquake loss modelling,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.

162. Pinho R., Casarotti C. Monteiro R., Delgado R. (2008) “Verification of Nonlinear Static Procedures for assessment of bridges subjected to transverse action,” Proceedings of the Workshop on Nonlinear Static Methods for Design/Assessment of 3D Structures, Lisbon, Portugal.

163. Pinho R., Marques M., Monteiro R., Casarotti C. (2008) “Using the Adaptive Capacity Spectrum Method for seismic assessment of irregular frames,” Proceedings of the 5th European Workshop on the Seismic Behaviour of Irregular and Complex Structures, Catania, Italy, Paper no. 21.

164. Savoia M., Ferracuti B., Pinho R., Serpieri M. (2008) “Force/Torque pushover method for plan irregular structures,” Proceedings of the Workshop on Nonlinear Static Methods for Design/Assessment of 3D Structures, Lisbon, Portugal.

165. Teramo M.S., Crowley H., Lopez M., Pinho R., Cultrera G., Cirella A., Cocco M., Mai M., Teramo A. (2008) “Modelling a repetition of the Messina 1908 earthquake,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. 07-0023.

166. Vuran E., Bal I.E., Crowley H., Pinho R. (2008) “Determination of equivalent SDOF characteristics of 3D dual RC structures,” Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, Paper no. S15-031.

167. Antoniou S., Pinho R. (2009) “Displacement-based Adaptive Pushover,” Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2009), Rhodes, Greece, Paper n. CD448.

168. Bhatt C., Bento R., Pinho R. (2009) “3D irregular SPEAR building’s assessment using Nonlinear Static Procedures,” Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2009), Rhodes, Greece, Paper n. CD244.

169. Tarque N., Crowley H., Varum H., Pinho R. (2009) “Structural properties of adobe dwellings in Cusco (Peru) for seismic risk assessment,” Proceedings of the 1st Mediterranean Conference on Earth Architecture, Cagliari, Italy.

170. Ahmad N., Crowley H., Pinho R., Ali Q. (2010) “Simplified formulae for the displacement capacity, energy dissipation and characteristic vibration period of brick masonry buildings,” Proceedings of the 8th International Masonry Conference, Dresden, Germany.

171. Ahmad N., Crowley H., Pinho R., Ali Q. (2010) “Derivation of displacement‐based fragility functions for masonry buildings,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 327.

172. Ahmad N., Ali Q., Crowley H., Pinho R. (2010) “Displacement-based seismic risk assessment of stonemasonry buildings of Pakistan,” Proceedings of the 3rd Asia Conference on Earthquake Engineering, Paper id. ACEE-P-101, Bangkok, Thailand.

173. Almeida J. Correia A.A., Pinho R. (2010) “Validation of a force‐based flexure‐shear element for 3D inelastic seismic analysis of frames,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 729.

174. Almeida J., Pinho R., Das S. (2010) “Guidelines for fibre‐based inelasticity modelling of reinforced concrete members,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 764.

175. Bhatt C., Bento R., Pinho R. (2010) “Assessing a real 3D Turkish RC building using Nonlinear Static Procedures,” Proceedings of the 9th US National and 19th Canadian Conference on Earthquake Engineering, Toronto, Canada.


176. Bhatt C., Bento R., Pinho R. (2010) “Verification of Nonlinear Static Procedures for a 3D plan‐irregular building in Turkey,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 667.

177. Broglio S., Crowley H., Pinho R. (2010) “Simplified capacity curves for RC bridges,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 1336.

178. Broglio S., Crowley H., Pinho R. (2010) “Structure‐dependent displacement‐based intensity measure for bridges,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 1338.

179. Kumar M., Bal I.E., Crowley R., Pinho R. (2010) “Period-height and displacement capacity equations for embedded beam structures,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 245.

180. Tarque N., Crowley H., Varum H., Pinho R. (2010) “Structural properties of adobe dwellings in Cusco (Peru) for seismic risk assessment,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 217.

181. Tarque N., Crowley H., Pinho R., Varum H. (2010) “Seismic risk assessment of adobe dwellings in Cusco (Peru) based on mechanical procedures,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 218.

182. Tarque N., Crowley H., Varum H., Pinho R. (2010) “Seismic capacity of adobe dwellings,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 216.

183. Teramo M.S, Crowley H., Pinho R. (2010) “Seismic risk assessment of the city of Messina (Italy) based on a logic tree approach,” Proceedings of the 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, paper n. 567.

184. Adhikari G., Pinho R. (2011) “Adaptive Capacity Spectrum Method for seismic assessment of plan-asymmetric buildings subjected to bi-directional seismic input,” Proceedings of the 6th European Workshop on the Seismic Behaviour of Irregular and Complex Structures (6EWICS), Haifa, Israel.

185. Adhikari G., Pinho R. (2011) “Adaptive Capacity Spectrum Method – a useful tool in performance based seismic engineering,” Proceedings of the International Conference on Earthquake Analysis and Design of Structures (EQADS 2011), Tamilnadu, India.

186. Ahmad N., Ali Q., Crowley H., Pinho R. (2011) "Displacement-based seismic performance evaluation of Dhajji structural systems", Proceedings of the 11th North American Masonry Conference, Minnesota, USA, Paper No. 089.

187. Ahmad N., Crowley H., Pinho R., Ali Q. (2011) “Frame-elements constitutive law for nonlinear static and dynamic analyses of masonry buildings,” Proceedings of the International Structural Engineering and Construction, Paper No. S2_S63, Zurich, Switzerland.

188. Ahmad N., Crowley H., Pinho R., Ali Q. (2011) “Displacement-based earthquake loss assessment of adobe buildings in Pakistan,” Proceedings of the International Structural Engineering and Construction, Paper No. S2_S54, Zurich, Switzerland.

189. Ahmad N., Badrashi Y.I., Ali Q., Crowley H., Pinho R. (2011) “Development of displacement-based method for seismic risk assessment of rc building stock of Pakistan,” Proceedings of the International Conference on Earthquake Engineering and Seismology, Paper No. 11, Islamabad, Pakistan.

190. Almeida J.P., Das S., Pinho R. (2011) “Adaptive force-based frame element for regularized response,” Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), Corfu, Greece.

191. Bianchi F., Sousa R., Pinho R. (2011) “Blind prediction of a full-scale RC bridge column tested under dynamic conditions”, Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), Corfu, Greece, Paper no. 294.


192. Magni F., Sullivan T., Pinho R., Calvi G.M. (2011) “Development of computer software for Direct Displacement Based Design,” Proceedings of Structural Engineering World Conference 2011, Como, Italy.

193. Sousa R., Bianchi F., Pinho R., Nascimbene R. (2011) “Seismic assessment of existing buildings: critical comparison between Eurocode 8 and Italian Seismic Code,” Proceedings of the 3rd International Conference Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), Corfu, Greece.

194. Sousa R., Bianchi F., Pinho R., Nascimbene R. Kazantzidou D. (2011) “Modelling issues on seismic assessment of irregular RC structures,” Proceedings of the 3rd International Conference Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2011), Corfu, Greece.

195. Ahmad N., Ali Q., Crowley H., Pinho R. (2012) "Earthquake loss estimation of structures in Pakistan," Proceedings of the 9th International Conference on Urban Earthquake Engineering/4th Asia Conference on Earthquake Engineering, Tokyo, Japan.

196. Almeida, J.P., Das, S., Pinho, R. (2012) “RC frame analysis with a new damage-following model,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper no. 5079.

197. Broglio S., Crowley H., Pinho R. (2012) “Bayesian Network Framework for Macro-Scale Seismic Risk Assessment and Decision Making for Bridges,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper no. 3267.

198. Calvi G.M., Moratti M., Villani A., Pietra D., Pinho R. (2012) “Seismic Design of cable-stayed bridges. The South Crossing Bridge in Guayaquil, Ecuador,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal.

199. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2012) “Nonlinear pile-head macro-element model: SSI effects on the seismic response of a monoshaft-supported bridge,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 5527.

200. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2012) “A pile-head macro-element approach to seismic design of extended pile-shaft-supported bridges,” Proceedings of the 2nd International Conference on Performance-Based Design in Earthquake Geotechnical Engineering (2ICPBDEGE), Taormina, Italy, Paper No. 7.03.

201. Crowley H., Silva V., Bal I.E., Pinho R. (2012) “Calibration of Seismic Design Codes using Loss Estimation,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper no. 4891.

202. Pinho R. (2012) “GEM: a Participatory Framework for Open, State-of-the-Art Models and Tools for Earthquake Risk Assessment,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal.

203. Scodeggio A., Monteiro R., Dacarro F., Crowley H., Pinho R. (2012) “Finite Element Model Updating of Buildings using Dynamic Identification Measurements,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper no. 1331.

204. Silva V., Varum H., Crowley H., Pinho R. (2012) “Extending Displacement-Based Earthquake Loss Assessment (DBELA) for the Computation of Fragility Curves,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper no. 4909.

205. Silva V., Varum H., Crowley H., Sousa R., Pinho R. (2012) “Evaluation of Analytical Methodologies to Derive Vulnerability Functions,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper no. 4917.

206. Silva V., Crowley H., Pagani M., Pinho R., Monelli D. (2012) “Development and Application of OpenQuake, an Open Source Software for Seismic Risk Assessment,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper no. 4923.

207. Silva V., Crowley H., Pinho R., Varum H. (2012) “Development of an open-source platform for calculating losses from earthquakes” Proceedings of the European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference, Aveiro, Portugal.

208. Sousa R., Eroglu T., Kazantzidou-Firtinidou D., Kohrangi M., Sousa L., Nascimbene R., Pinho R. (2012) “Using Nonlinear Static Procedures for the seismic assessment of irregular RC


buildings,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal.

209. Sousa R., Eroglu T., Kazantzidou-Firtinidou D., Kohrangi M., Sousa L., Nascimbene R., Pinho R. (2012) “Effect of different modelling assumptions on the seismic response of RC structures,” Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal.

210. Casotto C., Silva V., Crowley H., Nascimbene R., Pinho R. (2014) “Seismic fragility and collapse probability of Italian precast reinforced concrete industrial structures,” Proceedings of the 12th International Conference on Computational Structures Technology, Naples, Italy.

211. Casotto C., Silva V., Crowley H., Pinho R., Nascimbene R. (2014) “Scenario damage analysis of RC precast industrial structures in Tuscany, Italy,” Proceedings of the 2nd European Conference on Earthquake Engineering and Engineering Seismology, Istanbul, Turkey, Paper no. 1129.

212. Monteiro R., Zhang X., Pinho R. (2014) “Different approaches to derive analytical fragility functions of bridges,” Proceedings of the 2nd European Conference on Earthquake Engineering and Engineering Seismology, Istanbul, Turkey, Paper no. 1183.

213. Silva V., Crowley H., Varum H., Pinho R. (2014) “Seismic hazard and risk assessment of Portugal,” Proceedings of the 2nd European Conference on Earthquake Engineering and Engineering Seismology, Istanbul, Turkey, Paper no. 1792.

214. Silva V., Crowley H., Varum H., Pinho R., Marques M. (2014) “Investigation of the characteristics of the Portuguese moment-frame RC building stock,” Proceedings of the 2nd International Conference on Vulnerability and Risk Analysis and Management, Liverpool, UK, Paper no. 640.

215. Silva V., Crowley H., Varum H., Pinho R., Sousa L. (2014) “Development of a fragility model for moment-frame RC buildings in Portugal,” Proceedings of the 2nd International Conference on Vulnerability and Risk Analysis and Management, Liverpool, UK, Paper no. 639.

216. Silva V., Crowley H., Yepes C., Pinho R. (2014) “Presentation of the OpenQuake-engine, an open-source software for seismic hazard and risk assessment,” Proceedings of the 10th U.S. National Conference on Earthquake Engineering, Anchorage, Alaska.

217. Silva V., Marques M., Crowley H., Varum H., Pinho R. (2014) “Development of a framework for real time earthquake loss estimation for Portugal,” Proceedings of the 2nd European Conference on Earthquake Engineering and Engineering Seismology, Istanbul, Turkey.

218. Sousa L., Silva V., Marques M., Crowley H., Pinho R. (2014) “Development of multi IM based fragility functions for earthquake loss estimation,” Proceedings of the 2nd European Conference on Earthquake Engineering and Engineering Seismology, Istanbul, Turkey, Paper no. 1060.

219. Sousa L., Silva V., Marques M., Crowley H., Pinho R. (2014) “Including multiple IMTs in the development of fragility functions for earthquake loss estimation,” Proceedings of the 2nd International Conference on Vulnerability and Risk Analysis and Management, Liverpool, UK, Paper no. 637.

220. Sousa R., Correia A.A., Almeida J.P., Pinho R. (2014) “Blind prediction tests as a benchmark to improve the seismic response of fibre models,” Proceedings of the 2nd European Conference on Earthquake Engineering and Engineering Seismology, Istanbul, Turkey, Paper no. 1715.

221. Sousa R., Almeida J.P., Correia A.A., Pinho R. (2014) “Simplified wide-column model for the blind prediction shake table test of a U-shaped wall building,” Proceedings of the SMART2013 Workshop, Paris, France.

222. Zelaschi C., Monteiro R., Marques M., Pinho R. (2014) “Comparative analysis of intensity measures for reinforced concrete bridges,” Proceedings of the 2nd European Conference on Earthquake Engineering and Engineering Seismology, Istanbul, Turkey, Paper no. 1788.

223. Monteiro R., Delgado R., Pinho R. (2015) “Using different uncertainty models for seismic assessment of RC bridges,” Proceedings of the 5th ECCOMAS Thematic Conference on


Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2015), Crete, Greece, pp. 887-899.

224. Zelaschi C., Monteiro R., Pinho R. (2015) “Improved fragility functions for RC bridge populations,” Proceedings of the 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2015), Crete, Greece, pp. 4147-4159.

225. Zelaschi C., Monteiro R. Pinho R. (2016) “Simplified period estimation of Italian RC bridges for large-scale seismic assessment,” Proceedings of the ECCOMAS Congress 2016 – VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete, Greece, paper n. 16427.

Atti di convegni nazionali

226. Ferracuti B., Savoia M., Pinho R., Francia R. (2006) “Conventional and adaptive pushover procedures against dynamic analysis,” Proceedings of the 16th Italian Conference on Computational Mechanics (GIMC 2006), Bologna, Italy.

227. Borzi B., Pinho R., Crowley H. (2007) “SP-BELA: a mechanics-based method based on simplified pushover analysis for seismic vulnerability assessment,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 160. (in Italian)

228. Calvi G.M., Pinho R., Goretti A., Crowley H., Colombi M., Grant D.N. and Bommer J.J (2007) “A prioritization scheme for seismic intervention in school buildings in Italy,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 181. (in Italian)

229. Casarotti C., Bruno V.I., Pinho R. (2007) “An Adaptive Capacity Spectrum Method for the assessment of reinforced concrete buildings,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 185. (in Italian)

230. Correia A.A., Almeida J.P., Pinho R. (2007) “Comparison between equilibrium- and displacement-based element formulations for nonlinear analysis for RC framed structures,” Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Porto, Portugal. (in Portuguese)

231. Crowley H., Pinho R., Faravelli M., Montaldo V., Meletti C., Calvi G.M., Stucchi M. (2007) “Influence of new Italian seismic hazard maps on seismic risk assessment in Italy,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 163. (in Italian)

232. Ferracuti B., Pinho R., Savoia M., Francia R. (2007) “Pushover versus incremental dynamic analyses,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 234.

233. Pinho R. (2007) “Using basic principles of mechanics of materials to assess earthquake-induced losses of large geographical areas,” Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Keynote Lecture, Porto, Portugal.

234. Pinho R. (2007) “Seismic assessment of buildings and bridges using nonlinear static procedures,” Proceedings of the 16th Peruvian Congress of Civil Engineering, Keynote Lecture, Arequipa, Peru.

235. Pinho R. (2007) “Displacement-based adaptive pushover,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 184. (in Italian)

236. Pinho R., Bento R., Bhatt C., Casarotti C. (2007) “Adaptive approaches for assessment of structures subjected to earthquake actions,” Proceedings of the 7th Portuguese National Conference on Seismology and Earthquake Engineering, Porto, Portugal. (in Portuguese)

237. Pinho R., Crowley H., Angel J.P., Gervasio M. (2007) “Linear static and dynamic methods presented in OPCM 3274 – brief review and possible revision,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 161. (in Italian)

238. Pinho R., Crowley H., Bommer J.J., Colombi M. (2007) “Using displacement-based earthquake loss assessment in the selection of seismic code design levels,” Proceedings of the 12th Italian Conference on Earthquake Engineering, Pisa, Italy, Paper no. 183. (in Italian)


239. Pinho R., Quaglini L. (2007) “Employing fibre modelling to simulate the response of a 7-storey full-scale building slice tested under dynamic conditions,” Proceedings of the 7th Portuguese Conference on Seismology and Earthquake Engineering, Porto, Portugal. (in Portuguese)

240. Ferracuti B., Pinho R., Savoia M. (2008) “Statistical validation of nonlinear pushover methods by incremental dynamic analyses,” Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy.

241. Ferracuti B., Savoia M., Pinho R., Serpieri M. (2008) “Seismic analysis of irregular RC structures by 3D force/torque pushover method,” Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy.

242. Lanese I., Nascimbene R., Pavese A., Pinho R. (2008) “Numerical simulations of an infilled 3D frame in support of a shaking-table testing campaign,” Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy. (in Italian)

243. Pinho R. (2008) “Adaptive and non-adaptive nonlinear static analysis of irregular structures,” Proceedings of the RELUIS Conference on Assessment and Mitigation of Seismic Vulnerability of Existing Reinforced Concrete Structures, Rome, Italy. (in Italian)

244. Biserna F., Ferracuti B., Savoia M., Pinho R. (2009) “Distributed and lumped-plasticity approaches for modeling RC frame structures under seismic action,” Proceedings of the 13th Italian Conference on Earthquake Engineering, Bologna, Italy, Paper no. S2.2.

245. Calabrese A., Almeida J., Pinho R. (2009) “Modelling, interpreting results and extracting reliable outputs from distributed inelasticity formulations,” Proceedings of the 13th Italian Conference on Earthquake Engineering, Bologna, Italy, Paper no. S10.5.

246. Ceresa P., Petrini L., Pinho (2009) “Modelling flexural-shear response of RC elements under cyclic loading,” Proceedings of the 13th Italian Conference on Earthquake Engineering, Bologna, Italy, Paper no. S2.6. (in Italian)

247. Ferracuti B., Savoia M., Pinho R. (2009) “3D pushover analysis for evaluating torsional effect of RC structures,” Proceedings of the 13th Italian Conference on Earthquake Engineering, Bologna, Italy, Paper no. SM3.6.

248. Monteiro R., Delgado R., Crowley H., Pinho R. (2009) “Seismic safety of bridges according to different assessment procedures,” Proceedings of the 1st National Conference on Safety and Conservation of Bridges, Lisbon, Portugal. (in Portuguese)

249. Monteiro R., Delgado R., Pinho R., Casarotti C. (2009) “Assessment of seismic response of bridges using nonlinear static analyses,” Proceedings of the 1st National Conference on Safety and Conservation of Bridges, Lisbon, Portugal. (in Portuguese)

250. Novelli V.I., Sullivan T.J., Pinho R. (2009) “Unloading stiffness for RC elements,” Proceedings of the 13th Italian Conference on Earthquake Engineering, Bologna, Italy, Paper no. S2.15. (in Italian)

251. Pinho R., Crowley H. (2009) “Revisiting EC8 formulae for periods of vibration and their employment in linear seismic analysis,” Proceedings of the RELUIS Workshop on Eurocode 8 Perspectives from the Italian Standpoint, Napoli, Italy, pp. 95-108.

252. Almeida J.P., Correia A.A., Pinho R. (2010) “Validation of a force-based flexure-shear element for 3D inelastic seismic analysis of frames,” Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal, paper n. 29.

253. Bhatt C., Bento R., Pinho R. (2010) “Nonlinear Static Analyses for the seismic assessment of the SPEAR building,” Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal, paper n. 23. (in Portuguese)

254. Bhatt C., Bento R., Pinho R. (2010) “Applying the Adaptive Capacity Spectrum method to real plan-irregular buildings,” Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal, paper n. 24. (in Portuguese)


255. Correia A.A., Pecker A., Kramer S., Pinho R. (2010) “Soil-Foundation-Structure interaction: overview and state-of-the-art seismic analysis of shallow foundations,” Proceedings of the 12th Portuguese National Conference on Geotechnical Engineering, Guimaraes, Portugal.

256. Silva V.E., Varum H., Crowley H., Pinho R. (2010) “Developing a global seismic risk engine,” Proceedings of the 8th Portuguese Conference on Engineering Seismology and Earthquake Engineering, Aveiro, Portugal, paper n. 122.

257. Almeida J.P., Correia A.A., Pinho R. (2010) “Incursion into the inelastic range of a column modelled with a new force-based flexure-shear frame element,” Proceedings of the 8th Portuguese Conference on Seismology and Earthquake Engineering, Aveiro, Portugal.

258. Bal I.E, Crowley H., Pinho R. (2011) “Proposal for a new structure-dependent displacement-based intensity measure,” Proceedings of the 7th National Conference on Earthquake Engineering, Istanbul, Turkey.

259. Bianchi F., Sousa R., Pinho R. (2011) “Modellazione di una pila da ponte nell’ambito di un “Blind Prediction Contest”,” Proceedings of the 14th National Conference (ANIDIS 2011), Bari, Italy.

260. Calvi G.M., Villani A., Pinho R. (2011) “Approcci innovativi per la progettazione sismica del South Crossing Bridge in Guayaquil Ecuador,” Proceedings of the 14th National Conference (ANIDIS 2011), Bari, Italy.

261. Fagà E., Moratti M., Nascimbene R., Pinho R. (2011) “Analisi e verifica sismica di serbatoi pensili a traliccio esistenti in cemento armato,” Proceedings of the 14th National Conference (ANIDIS 2011), Bari, Italy.

262. Sousa R., Bianchi F., Pinho R., Nascimbene R (2011) “Problematiche di modellazione nella valutazione sismica delle strutture esistenti,” Proceedings of the AIST Conference, Bologna, Italy.

263. Sousa R., Bianchi F., Pinho R., Nascimbene R. (2011) “Valutazione sismica di edifici esistenti in CA: un confronto fra l’Eurocodice 8 e le Nuove Norme Tecniche per le Costruzioni (NTC-08),” Proceedings of the 14th National Conference (ANIDIS 2011), Bari, Italy.

264. Correia A.A., Pecker A., Kramer S.L., Pinho R. (2012) “An innovative pile-head macro-element model for seismic analysis of pile/column supports,” Proceedings of the 3rd Portuguese Young Geotechnicians Conference (3EJG), Lisbon, Portugal.

265. Stucchi M., Gomez Capera A.A., Garcia Pelaez J., Albini P., Pinho R. (2012) “The GEM project “Tools for compiling the Global Earthquake History”: Initiatives in the Americas,” Proceedings of the 4th International Conference on Hazard, Geological Risk, Earthquake Engineering and Disasters, Santiago de Cuba, Cuba.

266. Sousa R., Correia A.A., Almeida J.P., Pinho R. (2014) “Evaluation of fibre element models through comparison with shaking table results,” Proceedings of the 5th National Conference on Structural Engineering, Lisbon. (in Portuguese)

267. Ay B.O., Pinho R., Crowley H. (2015) “Evaluation of ground-motion record scaling and selecting methods for seismic design and assessment of structures,” Proceedings of the 3rd Turkish Conference on Earthquake Engineering and Seismology, Izmir, Turkey.

268. Sousa R., Almeida J.P., Correia A.A., Pinho R. (2016) “Numerical simulation of RC frames with explicit modelling of bar slippage,” Proceedings of the 10th Portuguese National Conference on Seismology and Earthquake Engineering (SISMICA 2016), Azores, Portugal, Paper n. 66.

Altre pubblicazioni

269. Pinho R., Calvi G.M., Crowley H. (2006) “Politiche assicurative e bancarie in relazione alla definizione di scenari di rischio e di perdite attese,” L’Edilizia, Vol. 145, pp. 50-53.

270. Crowley H., Pinho R., Lopez M., Teramo A., Bottari A., Termini D., Teramo M.S., Cultrera G., Cocco M., Cirella A., Herrero A., Piatanesi A., Lorito S., Romano F., Mai M., Imperatori W. (2008) Messina – dal terremoto del 1908 alla valutazione di scenari di danno nel 2008, IUSS Press, Pavia, Italy.

271. Pinho R., Crowley H. (2009) “Messina – dal terremoto del 1908 alla valutazione di scenari di danno nel 2008,” L'Ingegnere Italiano, supplemento al n. 347, pp. 10-14.


272. Calvi G.M., Pinho R. (2009) “L’impatto economico del sisma,” Social News, Vol. 6, N. 4, pp. 30-31.

273. Giardini D., Lindholm C., Pinho R., Stein R.S., Stillwell K., Zschau J. (2009) “Open access?,” Nature Geoscience, Vol. 2., pp. 155.

274. Pinho R. (2009) “Guest Editorial,” Journal of Earthquake Engineering, Vol. 13, N. SP1, pp. vii-viii.

275. Crowley H., Colombi M., Lopez M., Teramo M.S., Pinho R. (2010) “La simulazione numerica delle conseguenze di un terremoto a Messina,” Mondo Digitale, N. 34.

276. Calvi G.M., Moratti M., Nascimbene R., Fagà E., Pinho R. (2012) “La Gran Guglia del Duomo di Milano: analisi, modellazione e verifica,” Structural Modeling - Magazine di Ingegneria Strutturale, CSP Fea, Vol. 7, pp. 4-6.

Rui Pinho CV, Maggio 2017 · 2017-07-18 · Rui Pinho CV, Maggio 2017 CURRICULUM VITAE DATI...

Documents

Transcript of Rui Pinho CV, Maggio 2017 · 2017-07-18 · Rui Pinho CV, Maggio 2017 CURRICULUM VITAE DATI...