General Catalogue Labeau T.Engineering co

32
1 www.labeau-tn.com - [email protected] - Tel:+216-27045506 2013 CATALOGUE WATER TREATMENT LABEAU TUNISIE - TUNISIE

description

In the general catalogue are present all the products by Labeau T.Reverse osmosis plants, Desalinators, mobile plants, softeners, EDI plants, etc.

Transcript of General Catalogue Labeau T.Engineering co

Page 1: General Catalogue Labeau T.Engineering co

1www.labeau-tn.com - [email protected] - Tel:+216-27045506

2013CATALOGUE WATER TREATMENT

LABEAU TUNISIE - TUNISIE

Page 2: General Catalogue Labeau T.Engineering co

2 www.labeau-tn.com - [email protected] - Tel:+216-27045506

Profilo

Progettiamo e produciamo sistemi di purificazione di acqua da oltre 20 anni. Dapprima solo ed esclusivamente nel settore da laborato-rio, in seguito abbiamo utilizzato l’esperienza acquisita in questo particolare campo per le esigenze dell’industria, delle aziende e più recentemente in campo domestico.

La ns. produzione comprende: sistemi per purificazione di acqua, quali osmosi inversa, deionizzatori scambio jonico ed impianti personalizzati per usi specifici.

Le Vostre esigenze

Da sempre abbiamo adattato le ns. soluzioni alle Vs. esigenze rite-nendo fondamentale e punto fermo la soddisfazione delle necessità dei nostri clienti.Labeau T. rappresenta il partner ideale in grado di analizzare le VS. problematiche, individuare le corrette soluzioni, eseguire prove di simulazioni con impianti pilota e quindi renderli effetivi: dalla fase di progettazione alla costruzione, dall’assemblaggio all’ installazione, dal collaudo alla continua manutenzione.

Vantaggi relativi ai prodotti Labeau T.

L’osmosi inversa viene da noi spesso impiegata per risolvere le esigenze dei ns. utenti, poiché è da ritenersi la tecnica più semplice, più naturale, la più economica e non inquinante. Di seguito riassumiamo le sue caratteristiche.Semplicità d’uso: Non richiede conoscenza particolari - non richie-de operazioni specifiche né per l’utilizzo né per la manutenzione.Naturale: perché sfrutta un principio naturale - quello dell’osmosi per realizzare la purificazione dell’acqua.Economica: non vengono impiegate resine scambiatrice, sostanze particolari, materiali costosi.Lunga durata: la membrana osmotica (il cuore del sistema) ha una vita media compresa tra i 2-3 anni.Non inquina: poiché utilizza un principio osmotico che è naturale non vi è alcun tipo d’inquinamento.L’osmosi inversa viene utilizzata per produrre acqua pura per utilizzi industriali e non, e molto spesso anche come sistema di pretrattamento quando è richiesto un grado qualitativo più elevato (acqua ultrapura); in questo caso l’acqua prodotta dall’osmosi inversa viene inviata a successivi sistemi di trattamento onde innalzare il grado qualitativo beneficiando comunque dell’utilizzo di acqua già pura.

L’Osmosi inversa elimina fino al 97-98% delle sostanze inorganiche presenti nell’acqua di alimentazione e fino al 98-99% di quelle organiche.

About us

We desing and manufacture water purification system since more than 20 years. At first only and exclusively in the field of laboratory, later on we have used the acquired experience in this particular field for the requirements of the industry, the companies and more recently in domestic field.

Our production includes: water purification systems, which reverse osmosis, jonic exchange deionizers and personalized systems for specific uses.

Your Requirements

From always we have based our solutions on your requirements; our opinion is that a firm point is the satisfaction of the necessities of our customers. Labeau T. represents the ideal partner in a position to analyzing your problematic, studiyng the correct solutions, to execute tests of simulations with pilot systems and therefore manufacture the final system: from the phase of planning to the construction, from assembly to the installation, from the test to the continuous maintenance.

Advantages using Labeau T. products

We often employed Reverse Osmosis in order to resolve the requirements of our customers; because it’s the simpler technique, the more natural, the most economic and not polluting. Its characteristics. Easy to use: It does not demand specific operations neither for the use neither for the maintenance. Natural: because it takes advantage of the natural principle of osmosis in order to realize the water purification. Economic: it do not use resines, particular substance or expensive material. Long duration: the membrane of reverse osmosis (the heart of the system) has a typical life between the 2-3 years. It does not pollute: since it uses the osmotic principle that is natural it does not pollute. Reverse Osmosis is used in order to produce pure water for industrial purpose and not, and many times also as pretreatment system when is demanded a more elevated qualitative degree (ultrapure water); in this case water produced by reverse osmosis is sended to successive treatment systems.

Reverse Osmosis eliminates until the 97-98% of the inorganic substances from feeding water and until the 98-99% of those organic ones.

DISTRIBUTION

Actually we are present in the following country by agents or local dealer.

BANGLADESH, BAHRAIN, EGYPT, UAE, IRAN, IRELAND,LYBIA, MALTA, MOROCCO, PORTUGAL, QATAR, SPAIN, TUNISIE, YEMEN, VENEZUELA

DISTRIBUZIONE

Attualmente siamo presenti nei seguenti paesi tramite agenti o distributori locali.

BANGLADESH, BAHRAIN, EGITTO, EMIRATI ARABI, IRAN, IRLANDA, LIBIA, MALTA, MAROCCO, PORTOGALLO, QATAR, SPAGNA, TUNISIA, YEMEN, VENEZUELA

Page 3: General Catalogue Labeau T.Engineering co

3www.labeau-tn.com - [email protected] - Tel:+216-27045506

RO Desalinators (Sea Water)RO-MP-I RO Systems over 1000m.3/day. 4RO-MP Sea water Desalination 60-1000m.3/day. 6RO-M Sea water Desalination 0,7-30m.3/day. 7UCRO-MP Sea water Container Desalinator 60-1000m.3/day. 8UMRO-MP Sea water Mobile Desalinator 24m.3/day. 10UMRO-MP Sea water Mobile Desalinator 48m.3/day. 11

RO (Brackish)ROS-I Reverse Osmosis Systems over 1000m.3/day. 12ROS Reverse Osmosis Systems 60-1000m.3/day. 14ROY Reverse Osmosis Systems 0,6-30 m3/day. 16ROC RO Systems 300-6.000lt/gg. 18

OthersSoftPure-LV-I Softeners 10.000-50.000lt./h. 20SoftPure-AD-D Softeners 900-4000lt./h. 21Softpure-AD-S Sand Filters 22LV-S UV Sterilizing systems/Debatterizzatori 200/5000lt./h. 23LV-I UV Sterilizing systems/Debatterizzatori 9000/38.000lt. and upper/h. 24

Laboratory System and Ultrapure waterDEI Deionizers/Deionizzatori scambio ionico 26DEI-Auto Deionizers/Deionizzatori Automatici 28

Special System - oil washingRO-WXX Mobile system oil equipments washing/Sistemi lavaggio equipaggiamenti petroliferi 28

MAIN LABEAU TUNISIE REFERENCE

INDICE/INDEX

Page 4: General Catalogue Labeau T.Engineering co

4 www.labeau-tn.com - [email protected] - Tel:+216-27045506

Quando Vi occorrono più di 1000 m.3 di acqua giorno la ns. proposta si chiama RO-MP-I Station.

RO-MP-I System:progetto che risolve i Vs. problemi di purificazione acqua. Non è solo un impianto ma Analisi, Progetto, Realizzazione e programma di manutenzione. Può richiedere l’impiego di più sistemi che utilizzando tecnologie producono acqua nella qualità e nella quantità richiesta.1. Analisi: tutte le informazioni sono processate per ottenere la miglior soluzione. L’analisi chimica dell’acqua da purificare è la base di partenza del progetto necessaria per individuare la giusta

soluzione.2. Progetto: il ns. ufficio tecnico realizza il progetto dell’impianto utilizzando software cad e specifici per il calcolo e la simulazione di produzione.3. Pilota: è possibile la realizzazione di impianti pilota di dimensioni ridotte rispetto al progetto finale per testare realmente il progetto.4. Realizzazione finale: La realizzazione dell’impianto viene eseguita presso il ns. stabilimento in Tunisia5. Programma di manutenzione: viene redatto il programma di

SEA WATER DESALINISATION (Production 1000/30000 m.3/24h)

DESALINIZZATORI ACQUA MARE(Produzione 1000-30000 m.3/24h)

When you need to produce more than 1000m3/day your answer is ROPlant Plus System.

RO-MP-I System:It is a project that resolve your water’s purification problem. Is not only a system but some more systems that use different technique to produce the quality that you need in the quantity that you want.

1. Analisis: all the information are processed to get the best solution. A complete chemical analysis of feed water is the base to understand the problem.2. Project: Our engineering office project the system by cad software and specific program to test and calculate the water production.3. Sample realization: In according to the project is possible to produce a pilote system (smaller sample) to really test the final system.4. Final Realization: The system is build in our factory in Tunisie – All the component and/or the systems are easy5. Maintenance program: it’s very important to guarantee the good work of the system.

RO-MP-l - SEA WATER DESALINATOR STATION - 1000-30000 m3/day

manutenzione per assicurare nel tempo il corretto funzionamento del sistema.

Page 5: General Catalogue Labeau T.Engineering co

5www.labeau-tn.com - [email protected] - Tel:+216-27045506

Model No.train prod.each Prod.TotalRO-MP-I1500 1 1500 m3/Day 1500 m3/DayRO-MP-I2000 1 2000 m3/Day 2000 m3/DayRO-MP-I3000 2 1500 m3/Day 3000 m3/DayRO-MP-I4000 2 2000 m3/Day 4000 m3/DayRO-MP-I4500 3 1500 m3/Day 4500 m3/DayRO-MP-I5000 2 2500 m3/Day 5000 m3/DayRO-MP-I6000 3 2000 m3/Day 6000 m3/DayRO-MP-I7500 3 2500 m3/Day 7500 m3/DayRO-MP-I10000 4 2500 m3/Day 10000 m3/DayRO-MP-I15000 3 5000 m3/Day 15000 m3/DayRO-MP-I20000 4 5000 m3/Day 20000 m3/DayRO-MP-I30000 6 5000 m3/Day 30000 m3/Day

Altre combinazioni possibili in base alle necessità dell’utilizzatore e al sito d’installazione.Other combination can be realized according need of the customer and the site of installation

Page 6: General Catalogue Labeau T.Engineering co

6 www.labeau-tn.com - [email protected] - Tel:+216-27045506

RO-MP - SEA WATER DESALINATORS 60-1000 m3/day

SEA WATER DESALINISATORS (Production 60-1000 m.3/24h)

The Right Capacity for Every NeedRO-MP are available in fresh water production ranges from 60 to 1000 m.3/24h per day from sea water feed sources. These systems are available stand alone for land use or in separate parts for marine use.Drinking Water directly from the Sea.All this is possible by our RO-MP systems. Everywhere these solve your problems to have drinking water.All high Pressure Fittings Duplex and 316 SSIn a corrosion environment like the marine one, only 316 stainless steel fitting must be used for longevity.All RO-MP systems are made with the finest grade 316 stainless steel and high

tech non corrosive materials.Moreover some parts are realized in Duplex SS for maxi-mum resistance.We can offer you as much convenience the best performan-ce and high quality.Fresh water flush a standard featureWe propose au-tomatic system to prevent problems in using. The standard

water flush clean the system with fresh water on shutdown and once a day (timer) to prevent corrosion or organic growth in the system.- Self carrying Structure - built with steel inox AISI316 outlined knit between them. The structure is palletized in order to facilitate the transport. - All the instrumentation, the gauges, the commandos and the emergency devi-ces are dislocated on the frontal panel of the system.- Heavy duty 20”/30” 20µm sediment filter according the models- High pressure pump. AISI 316 Stainless stell high pressure special design for sea water (3x230V/400V) .- RO-MP Systems include RO modules, production is 60-1000m3../DayIt’s possible to feed the system with high SDI water.- Automatic electronic system control display: - System in operation indicator - Conductivity outlet - Lighted On/Off controls - Pressure drain and permeate water - Automatic control of stand-by and cleaning of reverse osmosis membranes.- Automatic dosing system for antiscalant product.For the elevated capacity of the plants is very important to get water feeding analysis for the choice of the right pretreatment system.

DESALINIZZATORI ACQUA MARE(Produz.60-1000 m.3/24h)

La giusta Capacità per ogni esigenzaGli impianti RO-MP sono disponibili con produzione da 60 a 1000 m.3/24h per giorno da acqua di mare.Ciascun impianto è realizzabile ”stand alone” per utilizzo terrestre o in parti separati per utilizzo “imbarcato” .Acqua Potabile direttamente dal mare.Tuttociò è possibile con i ns. sistemi RO-MP. Ovunque risolvono il problema dell’acqua potabileTutte le tubazioni in alta pressione in Duplex e AIS316 SSIn un ambiente corrosidvo come quello marino, solamente tubazioni in AISI316 e SS possono essere utilizzate per offrire la massima longevità al sistema.Tuttavia alcune parti (in pressione) dei sistemi RO-MP sono realizzate in Ac-ciaio inox Duplex o Titanio AISI904L per offire la massi-ma durata e resistenza alla corresione. Vi offriamo le migliori performance e la miglior qualità ad un prezzo concorrenziale.Flusciaggio standard incluso nelle vers.standardVi offriamo il sistema au-tomatico di lavaggio delle memebrane per prevenire possibili intasamenti. Que-sto sistema esegue ogni 24h. (e prima di ogni spegnimento) il lavaggio con acqua trattata in modo da rimuovere le sostanze che si sono depositate sulla superficie delle membrane.- Tutti gli strumenti di controllo: manometri, flussimetri, comandi e dispositivi di emer-genza sono dislocati sul pannello di comando frontale del sistema.- Ciascun impianto utilizza 1 o più filtri da 20µm ed uno o più filtri da 5µm di lunghezza 20/30/40” (lungh. e numero secondo i modelli e le portate)- Pompa ad alta pressione. In Titanio AISI904L specialmente studiata per acqua di mare (3x230V/400V) - Su alcuni modelli è fornibile per ridurre i consumi elettrici un sistema di recupero di energia a turbina.- I sistemi RO-MP includono moduli ad osmosi inversa con produzione da 60 a 1000 m.3/24h. E’ possibile alimentare il sistema con acqua con elevato SDI.- Sistema di controllo elettronico a PLC. con indicazione della Conuducibilità acqua ingres-so, uscita - Controllo accensione e spegnimento - pressione e portata scarico e permeato.- Sistema automatico di controllo stand-by a lavaggio membrane RO.- Sistema automatico dosaggio antiscalante altri prodottiPer le elevate capacità di questi sistemi è molto importante avere un’analisi chimica dell’acqua di alimentazione così da scegliere il giusto sistema di pretrattamento.

Page 7: General Catalogue Labeau T.Engineering co

7www.labeau-tn.com - [email protected] - Tel:+216-27045506

RO-M - SEA WATER DESALINATORS - 0,7-60 m3/day

POTABILIZATTORI e DESALINIZZATORI (Produz.0,75-30 m.3/24h)

Acqua Potabile Direttamente dal MareOggi è realtà con i nostri sistemi RO-M. Adatti sia per impiego nautico che terrestre. Potrete avere ovunque acqua potabile.

La Gamma dei Sistemi RO-MTutti i sistemi RO-M sono costruiti con particolari in acciaio inossidabile (AISI316L e Duplex) della più elevata qualità e componenti in materiale non corrosivo.Vi offriamo la maggior convenienza con le più elevate performance e standard qualitativi.

Ogni sistema può essere semi-automatico o automatico per prevenire problemi di manutenzione.

Caratteristiche:- Struttura di supporto (Skid) in acciaio inox AISI316, sez. 40x40mm. elettrosaldata. Montata su supporto pallettizza-to per facilitare il trasporto e gli spostamenti.- Tutta la strumentazione, mano-metri , i comandi e i dispositivi di emergenza sono posti sul forntale del sistema.- Prefiltro da 10/20” - 20µm - Prefiltro da 10/20” - 5µm- Pompa ad alta pressione in ac-ciaio inox AISI 316 anticorrosione, specifica per operazioni con acqua di mare (3x230/400V).- I sistemi RO-M comprendono moduli Osmosi inversa che garan-tiscono una produzione, secondo modelli, da 750 a 30000 lt/24h.- E’ possibile alimentare i sistemi con acqua con elevato SDI.- Sistema elettronico di controllo con display- Indica sistema ON - Conducività acqua prodotta - Pressione di sca-rico e di produzione.- Sistema automatico di lavaggio delle membrane - Sistrema automatico di dosaggio antiprecipitante

Data la particolarità dei sistemi, si consiglia sempre di richiedere una quotazione dopo aver inviato un’analisi chimica completa dell’acqua di mare nell’area d’in-stallazione dell’impianto.

WATER POTABILISATION and DESALINISATORS (Production 0,75-30 m.3/24h)

Drinking Water directly from the Sea.All this is possible thanks to our RO-M watermakers systems. You will be able to have everywhere drinking water.

The RO-M Series:

All RO- M systems are made with the finest grade stainless steel and h i g h tech non corrosive materials.We can offer you as much convenience the best performance

and high quality.We propose automatic or semi-automatic

system to prevent problems in using it.

- Self carrying Structure - SKID, built with steel inox AISI316 outlined, of quadrangu-lar section 40x40mm knit between them.

The structure is palletized in order to facilitate the transport. - All the instrumentation, the gauges, the commandos and the emergency devices are dislocated on the frontal panel of the system.- Heavy duty 10/20” 20µm sediment filter - Heavy duty 10/20” 5µm sediment filter - High pressure pump. AISI 316 Stainless stell high pressure special design for sea water (3x230V/400V) .- RO-M System include reverse osmosis modules, production is 750-30000lt./DayIt’s possible to feed the system with high SDI water.- Automatic electronic system control display: - Status of plant - Permeate conduc-tivity - Pressure permeate and brine

- Automatic membrane washing system- Automatic anitscalant dosing system

- for maximum sureness is reccomended ask a quota-tion after sending a full chemical analysis of the sea water

in ther ared of installation.

Page 8: General Catalogue Labeau T.Engineering co

8 www.labeau-tn.com - [email protected] - Tel:+216-27045506

Container InstallationThe MWRO-DMSC are installed in 10, 20 and 40ft containers to offer easier way to produce water. Place just the container near the point of use, place feed water pump and begin to produce.This plants offer highest flexibility because they can be moved very easily in other places.The cointainers are supplied with Air conditioned inside and Diesel Eletrical generator to offer maximum autonomy.The Right Capacity for Every NeedMWRO-DMSC are available as standard models with a production ranges from 60 to 1000 m.3/day from sea water feed sources. These systems are available stand alone for land use or in separate parts for marine use.Drinking Water directly from the Sea.All this is possible by our MWRO-DMSC systemsAll high Pressure Fittings DPX & 904LIn a corrosion environment like the marine one, only 316 stainless steel fitting must be used for longevity.All MWRO-DMSC system are made with the finest grade Duplex stainless steel or Titanium AISI904L and high tech non corrosive materials. We can offer you as much convenience the best performance and high quality.Fresh water flush a standard featureWe propose automatic system to prevent problems in using. The standard water flush clean the system with fresh water on shutdown and once a day (timer) to prevent corrosion or organic growth in the system.- All the instrumentation, the gauges, the commandos and the emergency devices are dislocated on the frontal panel of the system.- Every plants use 1 or more 20µm sediment filters and 1 or more 5µm sediment

filters - lenght is 20”/30” or 40” according the models and capacity.- High pressure pump. Ti-tanium AISI90L Stainless stell high pressure spe-cial design for sea water (3x230V/400V) - Special turbine recovery available on top models to reduce electrical consumption.- MWRO-DMSC Systems include reverse osmosis modules, production is 60 to 1000 m.3/day. It ’s possible to feed the system with high SDI water.- Automatic electronic sy-stem control display: - System in operation indi-cator - Conductivity outlet - Lighted On/Off controls - Pressure drain and per-

meate water - Automatic control of stand-by and cleaning of reverse osmosis membranes.- Automatic dosing system for antiscalant product.For the elevated capacity of the plants is very important to get water feeding analysis for the choice of the right pretreatment system.

Certifications and StandardsAll pressure vessels used by Labeau T., are approved and certificated by ASME. This is very important since they operate at 800 to 1000 PSI.The quality and dependability of Labeau T’s manufacturing techniques, engineering, and customer service continue to be the key to our growth and success. All Labeau T. systems are manufactured according CE approval.Customer PersonalizationFor special application requirements, Labeau T’s highly trained staff of engineers and technical marketing personnel are at your disposal and ready to assist you in all your specific desalination needs.

UCRO-MP - CONTAINER DESALINATORS

Installazione in ContainerLa serie UMRO-MP è costituita da impianti installati all’interno di speciali container da 10, 20 o 40’ e rappresentano il sistema più flessibile per la produzione di acqua.E’ sufficiente posizionare il container vicino al punto di utilizzo, collegare l’acqua e lo scarico ed iniziare la produzione anche dopo pochi minuti. Questi impianti sono molto flessibili, perché possono essere spostati facilmente altrove.Ciascun container può essere fornito con sistema di Aria condizionata interno e elettrogeneratore diesel in modo da essere sempre autonomi.Ogni Capacità per ciascuna esigenzaLa serie UMRO-MP è fornibile come standard nel range da 60 a 1000 m.3/24h e sono adatti per impego con acqua di mare a 35000 o 45000 TDS.Acqua potabile direttamente dal mareTuttociò è possibile grazie ai sistemi UMRO-MP. Il modo più semplice di installare ed utilizzare un dissalatore.Tubazioni in Pressione in DPX & 904LIn un ambiente corroviso come quello marino, deve essere impiegato solo acciaio inox AISI316.Tuttavia alcune parti (in pressione) dei sistemi UMRO-MP sono realizzate in Ac-ciaio inox Duplex o Titanio AISI904L per offire la massima durata e resistenza alla corresione. Vi offriamo le migliori performance e la miglior qualità ad un prezzo concorrenziale.Flusciaggio standard incluso nelle vers.standardVi offriamo il sistema automatico di lavaggio delle membrane per prevenire possibili intasamenti. Questo sistema esegue ogni 24h. (e prima di ogni spegnimento) il la-vaggio con acqua trattata in modo da rimuovere le sostanze che si sono depositate sulla superficie delle membrane.- Tutti gli strumenti di controllo: manometri, flussimetri, comandi e dispositivi di emergenza sono dislocati sul pannello di comando frontale del sistema.- Ciascun impianto utilizza 1 o più filtri da 20µm ed uno o più filtri da 5µm di lunghezza 20/30/40” (lungh. e numero secondo i modelli e le portate)- Pompa ad alta pressione in Acc.Duplex specialmente studiata per acqua di mare (3x230V/400V) - Su alcuni modelli è fornibile per ri-durre i consumi elettrici un sistema di recupero di energia a turbina.- I sistemi UMRO-MP includono moduli ad osmosi inversa con produzione da 30 a 1000 m3/24h. E’ possibile alimentare il sistema con acqua con elevato SDI.- Sistema di controllo elettronico a PLC con indicazione della Conu-ducibilità acqua ingresso, uscita - Controllo accensione e spegni-mento - pressione e portata scarico e permeato.- Sistema automatico di controllo stand-by a lavaggio membrane RO.- Sistema automatico dosaggio antiscalante altri prodottiPer le elevate capacità di questi sistemi è molto importante avere un’analisi chimica dell’acqua di alimentazione così da scegliere il giusto sistema di pretrattamento.Certificationi e StandardTutti i vessel per Osmosi inversa utilizzati da Labeau T. sono approvati e certificati ASME. dovendo operare a 60-70 bar.La qualità e la specializzazione dei ns.tecnici di produzione, dei nostri ingegneri insieme con il “customer service” post vendita sono le chiavi del nostr successo. Tutti i sistemi Labeau T. sono progettati e costruiti secondo la normatica CE

PersonalizzazionePer richieste speciali, per applicazioni particolari, i ns. tecnici più qualificati ed il personale tecnico-commerciale è a Vostra disposizione per assisterVi e per individuare le soluzioni più adatte alle Vostre esigenze.Processi di Osmosi InversaIl processo di Osmosi Inversa utilizza membrane semipermeabili per rimuovere

Page 9: General Catalogue Labeau T.Engineering co

9www.labeau-tn.com - [email protected] - Tel:+216-27045506

Certifications and StandardsAll pressure vessels used by Labeau T., are approved and certificated by ASME. This is very important since they operate at 800 to 1000 PSI.The quality and dependability of Labeau T.’s manufacturing techniques, engineering, and customer service continue to be the key to our growth and success. All Labeau T. products are manufactured according CE approval.Customer PersonalizationFor special application requirements, Labeau T’s highly trained staff of engineers and technical marketing personnel are at your disposal and ready to assist you in all your specific desalination needs.HIGH PRESSURE PUMP PROCESSThe RO process uses membranes to remove dissolved solids, organics, pyrogens and bacteria from water.RO also removes sodium, chloride, hardness, fertilizers, insecticides, arsenic, heavy metals and many other contaminants. Most importantly, RO reduces total dissolved solids (TDS) particulary sea reverse osmosis membrane are able to reduce high TDS sea water (35000-45000 TDS) to drinkable value (max. 450 TDS).MWRO-DMSC includes as standard simple pretreatment as a sediment and carbon filter and a more detailed as an anti-scalent feeder for very hard water in high efficiency RO systems. Other pretreatment methods are determined through a water analysis.Labeau T. uses only best quality components as: Emec dosing pump, Grundfos feed and high pressure pumps, Speck high pressure pumps, Filmtec and Toray membranes, Plasticon Vessels, Siata automatic valves, FIP pvc pipes, valves and automatic valves. Electrical components by ABB, Finder, Gewiss, Telemecanique and Siemens.

UCRO-MP 250 - in Container 40ft

A

Multimedia F

iltration

Double Air Condition

for internal te

mperature

control.

C.I.P. tank 1000 lt. - PVC and rectangular shape

RO High pressure pump - for maximum working.

RO Membranes in GRP Vessels

solidi disciolti, sostanze organiche, pirgoni e batteri dall’acqua.L’Osmosi Inversa rimuove anche Sodio, Cloruri, fertilizzanti, insetticidi, arsenico, metalli pesanti e molti altri contaminanti.Ma soprattutto l’Osmosi Inversa riduce i solidi disciolti totali (TDS) ed in particolare le mebrane O.I. per acqua di mare, sono capaci di ridurre la sua elevata salinità (35000-45000 TDS) a valori di acqua potabile (max. 450TDS).Gli impianti UMRO-MP includono come standard semplici pretrattamenti come filtri rimozione sedimenti e filtri a carbone e più sofisticati sistemi di dosaggio di antiscalante per massimizzare l’efficienze dei moduli di Osmosi Inversa.Altri sistemi di pretrattamento sono determinati in base all’analisi dell’acqua di alimentazione.

Labeau T. utilizza solamente componenti di migliore qualità:

Pompe dosatrici Emec Italia, Pompe di alimentazione e gruppi di pressione Grundfos, Pompe di Alta pressione Speck, Membrane originali Filmtec o Toray, Valve automatiche Siata, tubazioni, valvole e valvole automatiche in PVC FIP Italia. Componenti elettrici ABB, Finder, Gewiss, Telemecanique e Siemens.

Page 10: General Catalogue Labeau T.Engineering co

10 www.labeau-tn.com - [email protected] - Tel:+216-27045506

UMRO- - Mobile Desalinators - 24/48 m3/day

The Mobil System UMRO series by Labeau T. are able to produce fresh water from almost any source. These specific systems are projected and are built to work 24/day, and they can produce water from sources contaminated with chemicals, bacteria and/or radioactive particles. In the case of catastrophes, accidents or for military purposes, our UCRO Systems can produce drinking water in few minutes anywhere in the world.The first need for people in the above situation is to have drinkable water.The water produced is higher than the ones indicated by the levels of WHO - World Health Organization.

Trailer InstallationThe UMRO-MP are installed on a trailer for an easy moving. After having placed the feed water pump of UMRO in the point of use, this is ready to work.This plants offer the highest flexibility as they can be easily moved everywhere.The systems is supplied with a Diesel Electrical generator to offer the maximum autonomy and all the accessories for an immediate working.

The Right Capacity for Every NeedUMRO-MP are available as a standard model with a production range from 20 to 90m.3/day respectively from brackish and near sea water feed sources. Drinking Water directly from the salt source (max. 39000 Tds), rivers, lakes, ponds and seaAll this is possible thanks to our UMRO-MP systems

All high Pressure Fittings AISI316L or 904LIn a corrosive environment like the outside one, it is ne-cessary to use AISI316L stainless steel fitting thanks to its resistance.All UMRO systems are made with the finest grade stainless steel or Titanium AISI904L and high tech non corrosive materials. We can offer to you the best performance and the highest quality at the most convenient conditions.

Fresh water flush a standard featureWe propose an automatic system to prevent pro-blems during the using. The production of water is

automatically adjusted by PLC controller according to the quality of raw water.The standard water flush cleans the system with fresh water on shutdown and once a day (timer) prevents corrosion or organic growth in the system.

- Trailer Structure - heavy version, for hard use. Color standard mi-litary

green, per-sonalization co-lor available (with with red cross or other symbol). Only one axe for an easy moving.- All the instrumen-tation, the gauges, the commandos PLC and the emergency devices are dislocated on the frontal panel of the system.- Heavy duty 5µm bag filter - Heavy duty 1µm bag filter

SYSTEM CONTROLThe system is controlled by a sophisticated unit LW2 that permits the verification of single parameters in order to assure and to verify continuously the operation.

Custom OrdersFor special application requirements, Labeau T.’s highly trained staff of engineers, technicians and marketing managers are at your disposal and ready to assist you in all your specific desalination needs.

Certifications and StandardsAll pressure vessels used by Labeau T. are approved and certificated by ASME. This has become very important since they have been operated at 800 to 1000 PSI. The quality and reliability of Labeau T.’s manufacturing techniques, engineering, and customer service continue to be the key to our growth and success. All Labeau T. products are manufactured according CE approval and ISO9001:2000.

Page 11: General Catalogue Labeau T.Engineering co

11www.labeau-tn.com - [email protected] - Tel:+216-27045506

UMRO- - Mobile Desalinators - 24/48 m3/day

The Mobil System UMRO series by Labeau T. are able to produce fresh water from almost any source. These specific systems are projected and are built to work 24/day, and they can produce water from sources contaminated with chemicals, bacteria and/or radioactive particles. In the case of catastrophes, accidents or for military purposes, our UCRO Systems can produce drinking water in few minutes anywhere in the world.The first need for people in the above situation is to have drinkable water.The water produced is higher than the ones indicated by the levels of WHO - World Health Organization.

HIGH PRESSURE PUMP PROCESSThe RO process uses membranes to remove dissolved solids, organics, pyrogens and bacteria from water.RO also removes sodium, chloride, hardness, fertilizers, insecticides, arsenic, heavy metals and many other contaminants.But the most important thing is that RO reduces the total dissolved solids (TDS); our reverse osmosis membranes are particulary able to reduce high TDS water (until 39000 TDS) to drinkable value (450-500 TDS).UCRO series includes standard simple pretreatments as bag filter, UV sterilization and an anti-

scalent feeder for very hard water in high efficiency RO systems. Other pretreatment methods can be included according to the needs of the customers.

Labeau Tunisieuses only best quality

components as: Emec dosing pump,Lowara feed pumps,

Speck and Fedco high pressure pumpsFilmtec and Toray membranes

Plasticon and Bel Vessels Siata automatic valves

FIP pvc pipes, valves and automatic valves. Electrical components by

ABB, Finder, Gewiss,

Telemecanique and Panasonic.

MWRO-dMS Series: Trailer version

Model dMS20-T dMS40B-T dMS40S-T

Code No. 011-400.080 011-400.090 011-400.100

Length 3000 mm. 3700 mm. 3700 mm.

Width 2000 mm. 2100 mm. 2100 mm.

Height 2450 mm. 2450 mm. 2450 mm.

Weight 2200 kg. 2500 kg. 2600 kg.

Plant MS XXProduction 24 m3/Day/24h.* 48 m3/Day/24h.* 48 m3/Day/24h.*

1,00 m3/h. 2,00 m3/h. 2,00 m3/h.

Working pressure 4-35 bar 4-35 bar 10-60 barRaw Water Max.Salinitydiscontinuous working TDS 35000 TDS 30000 TDS 39000

Raw Water Max.Salinitycontinuous working TDS 25000 TDS 25000 TDS 35000

SDI 5

Water Tempera-ture

Min. 8-10° - Max. 40-45°C.

Max.Depth water 20/30mt.

Electrical Power 380/400V 50Hz. AC (Other Voltages and Frequency are available.Double working: with diesel genset supplied as standard or direclty by power supply.

* The production is variable according to the quality and temperature (@25°C) of the water. The working of the plant is fully automatic and controlled by PLC

Page 12: General Catalogue Labeau T.Engineering co

12 www.labeau-tn.com - [email protected] - Tel:+216-27045506

WATER POTABILISATION (Bigger than 290000 GPD)POTABILIZATTORI (Produz.oltre 1080 m.3/24h)

ROS-I - Reverse Osmosis Systems higher 1000 m3/day

Page 13: General Catalogue Labeau T.Engineering co

13www.labeau-tn.com - [email protected] - Tel:+216-27045506

Quando Vi occorrono più di 1000 m.3 di acquagiorno la ns. proposta si chiama ROPlant Plus System.

ROS-I Potabilization Station:

progetto che risolve i Vs. problemi di purificazioneacqua. Non è solo un impianto ma Analisi, Progetto,Realizzazione e programma di manutenzione. Può richiederel’impiego di più sistemi che utilizzando tecnologieproducono acqua nella qualità e nella quantità richiesta.1. Analisi: tutte le informazioni sono processate per ottenere la mi-glior soluzione. L’analisi chimica dell’acqua da purificare è la base di partenza del progetto necessaria per individuare la giusta soluzione.2. Progetto: il ns. ufficio tecnico realizza il progetto dell’impianto utilizzando software cad e specifici per il calcolo e la simulazione di produzione.3 .

Pilota: è possibile la realizzazione di impianti pilota di dimensioni ridotte rispetto al progetto finale per testare realmente il progetto.4. Realizzazione finale: La realizzazione dell’impianto viene eseguita presso il ns. stabilimento in italia5. Programma di manutenzione: viene redatto il programma di manutenzione per assicurare nel tempo il corretto funzionamento del sistema.

When you need to produce more than 290000GPDyour answer is ROPlant Plus System.

ROPlant Plus System:

is a project that solve your water’s purificationproblem. Is not only a system but more systems that usedifferent techniques to produce the quality that you need inthe quantity that you want.1. Analysis: all the information are processed to get thebest solution. A complete chemical analisis of feed wateris the base to understand the problem.2. Project: Our engineering office projects the system bycad software and specific program to test and calculatethe water production.3. Sample realization: In according to the project it is

possible to produce a pilote system (smaller sample) toreally test the final system.4. Final Realization: The system is built in our factory inItaly – The installation of all the component and/or the systems is very easy.5. Maintenance program: it’s very important to guaranteethe good work of the system.

ROS-I - Reverse Osmosis Systems higher 1000 m3/day

Model No.train prod.each Prod.TotalROS-I-1500 1 1500 m3/Day 1500 m3/DayROS-I-2000 1 2000 m3/Day 2000 m3/DayROS-I-3000 2 1500 m3/Day 3000 m3/DayROS-I-4000 2 2000 m3/Day 4000 m3/DayROS-I-4500 3 1500 m3/Day 4500 m3/DayROS-I-5000 2 2500 m3/Day 5000 m3/DayROS-I-6000 3 2000 m3/Day 6000 m3/DayROS-I-7500 3 2500 m3/Day 7500 m3/DayROS-I-10000 4 2500 m3/Day 10000 m3/Day

Other combination can be realized according need of the customer and the site of installation

Page 14: General Catalogue Labeau T.Engineering co

14 www.labeau-tn.com - [email protected] - Tel:+216-27045506

RO-S -Reverse Osmosis Systems 60-1000 m3/day

WATER POTABILISATION RO SYSTEM60-1000m3/day (16000-285000GPD)

WATER POTABILISATION SYSTEM60-1000 m3/day (16000-285000GPD)

For water purification:removing more than 98% of media and more than 99% of colloids and other organic media.

THE ROPLANT SYSTEM:

ROPLANT system consist of following stages:

- Self carrying Structure - dimension 6000/3500x1400/1200x1400h.mm. in the standard version, built with steel inox AISI316 outlined, of section 80/40x40mm knit between them. The structure is palletized in order to facilitate the transport.- All the instrumentation, the gauges, the commandos and the emergency devices are dislocated on the frontal panel of the system.- Heavy duty 40” 5µm sediment Multifilter - external case AISI304- High pressure pump. Stainless stell high pressure Up Vertical multistage pump (400V).- ROS System include reverse osmosis modules, production is 60-1000m3/hour (16000-285000GPD)It’s possible to feed the system with high SDI water.- Automatic electronic system control display: - System in operation indicator - Conductivity inlet and outlet - Lighted On/Off controls - Pressure inlet- Automatic control of stand-by and cleaning of reverse osmosis membranes.- Automatic dosing system for antiscalant product.

For the elevated capacity of this system is very important a water feeding analysis for the right choice of pretreatment system. So high capacity Water softners, Dechlorine and automatic system for the removal of Iron, Manganese and other are available.

PROCESS:The RO process uses membranes to remove dissolved solids, organics, pyrogens and bacteria from water.RO also removes sodium, chloride, hardness, fertilizers, insecticides, arsenic, heavy metals and many other contaminants.Most importantly, RO reduces total dissolved solids (TDS).ROS standard production includes a simple pretreatment as a sediment and carbon filter and a more detailed as an antiscalent feeder for very hard water in high efficiency RO systems. Other pretreatment methods are determined through a water analysis.

SYSTEM CONTROLThe system is controlled by a sophisticated unit LW1 that supplies to the verification of single parameters in order to assure and to verify continuously

RoSys2400

SISTEMI di POTABILIZZAZIONE di ACQUAda 60 a 1000 m3/giorno

Per la produzione di Acqua pura eliminando il 98% dei sali contenuti nell’ac-qua da trattare ed oltre il 99% dei Colloidi e delle sostanze organiche.

I SISTEMI ROS:I sistemi ROS sono basati sull’utilizzo della tecnologia dell’osmosi inversa. L’acqua da trattare dopo aver subito un primo pretrattamento mediante car-bone attivo per l’eliminazione di sostanze clorurate, subisce una filtrazione meccanica per trattenere particelle >5µm. e quindi viene inviata ad elevata pressione attraverso più membrane ad osmosi inversa con una reazione tipica >98%.

COMPOSIZIONE DEL SISTEMA:I sistemi ROS sono costituiti dai seguenti elementi:- Struttura autoportante di dim. 6000/3500x1400/1200x1400h. nella ver-sione standard, formata da profilati in acciaio inox AISI316, di sezione quadrangolare 40x40mm elettrosaldati tra loro. La struttura è pallettizzata per facilitarne il trasporto.- Tutta la strumentazione, i manometri, i comandi e i dispositivi di sicurezza sono dislocati sul frontale del sistema, in perspex di protezione.- Prefiltro di sicurezza multiplo da 40” 5µm. in acciaio AISI304- Pompa di alimentazione Verticale multistadio ad elevata pressione in acciaio inox. (400V) - I sistemi ROS sono composti da Moduli ad Osmosi Inversa di varia sezione, per produzioni da 60 a 1.000 m3./h. che consentono l’alimentazione con acqua di rete ad alto SDI (Salt Density index)- Modulo a microprocessore per il controllo completo; con display per la visualizzazione di parametri di verifica sul corretto funzionamento: pressione ingresso, conducibilità ingresso e uscita.- Modulo automatico con stand-by per il ricambio intermittente dell’acqua durante le soste prolungate.- Possibilità di controllo remoto mediante collegamento a PC con software gestionale personalizzato.- Possibilità di inserimento diretto di pannello PC nel sistema.

Trattandosi di sistemi di elevata portata è molto importante l’analisi dell’acqua di alimentazione per la corretta scelta di un eventuale sistema di pretrattamento.In tal senso sono disponibili Addolcitori ad elevata portata, Decloratori e Sistemi automatici per la rimozione di Ferro, Manganese ed altro.

Page 15: General Catalogue Labeau T.Engineering co

15www.labeau-tn.com - [email protected] - Tel:+216-27045506

the operation.

Main Features:- Acustic and visual Alarm - Inlet/outlet pressure -Display of TDS/Conductivity, pH, Temperature C° and % of recovery - Total hour meter - Membranes auto flush system and built-in cleaning system- System automatic rifle level controlserbatoio/i- The equipment is factory tested and sterilized prior to shipment- All components are high quality with FDZ/NSF approval

Typical Reverse Osmosis RO-SYS action

SISTEMA DI CONTROLLOIl sistema è controllato da una sofisticata unità LW2 che provvede alla verifica di singoli parametri per assicurare e monitare continuamente il funzionamento.

Caratteristiche principali:- Allarme acustico e visivo- Visualizzazione pressione ingresso/uscita- Visualizzazione di TDS/Consucibilità, pH, Temperatura C° e % di recovery- Display contaore totalizzatore- Sistema automatico di lavaggio delle membrane- Sistema automatico controllo di livello serbatoio/i

Controller LW2Controller LW3 Opzionale

Page 16: General Catalogue Labeau T.Engineering co

16 www.labeau-tn.com - [email protected] - Tel:+216-27045506

SISTEMI di POTABILIZZAZIONE DI ACQUAda 6 a 60 mcq./giorno

Per la produzione di Acqua pura eliminando il 98% dei sali contenuti nell’acqua da trattare ed oltre il 99% dei Colloidi e delle sostanze organiche.

PRINCIPIO FUNZIONAMENTO:I sistemi Roy sono basati sull’utilizzo della tecnologia dell’osmosi inversa. L’acqua da trattare dopo aver subito un primo pretrattamento mediante carbone attivo per l’eliminazione di sostanze clorurate, subisce una filtrazione meccanica per trattenere particelle >5µm. e quindi viene invia-ta ad elevata pressione attraverso più membrane ad osmosi inversa con una reazione tipica >98%.

COMPOSIZIONE DEL SISTEMA:I sistemi Roy sono costituiti dai se-guenti elementi:- Struttura autoportante di dim. 70x60x140h. nella versione standard, formata da profilati in acciaio inox AISI316, di sezione quadrangolare 40x40mm elettrosaldati tra loro. La struttura è pallettizzata per facilitarne il trasporto.- Tutta la strumentazione, i mano-metri, i comandi e i dispositivi di sicurezza sono dislocati sul frontale del sistema, in perspex di protezione.- Prefiltro di sicurezza lungh.20” da 5µm.- Prefiltro anticloro lungh.20” in C.A.- Pompa di alimentazione con pres-sioni di oltre 1o Bar.- I sistemi sono composti da Moduli ad Osmosi Inversa di varia sezione, per produzioni da 5.000 a 60.000 lt./giorno che consentono l’alimentazione con acqua di rete ad alto SDI (Salt Density index)- Modulo a microprocessore per il controllo completo; con display per la visualizzazione di parametri di verifica sul corretto funziona-mento: pressione ingresso, conducibilità ingresso e uscita.- Modulo automatico con stand-by per il ricambio intermittente dell’acqua durante le soste prolungate.- Possibilità di controllo remoto mediante collegamento a PC con software gestionale personalizzato.- Possibilità di inserimento diretto di pannello PC nel sistema.

Trattandosi di sistemi di elevata portata è molto importante l’analisi dell’acqua di alimentazione per la corretta scelta di un eventuale sistema di pretrattamento.In tal senso sono disponibili Addolcitori ad elevata portata, Declo-ratori e Sistemi automatici per la rimozione di Ferro, Manganese ed altro.

WATER POTABILISATION RO SYSTEMfrom 6 m3/day ( 1585GPD) to 60 m3/day (15850GPD)

For water purification: removing more than 98% of media and more than 99% of colloids and other organic media.

PROCESS:The RO process uses membranes to remove dissolved solids, organics, pyrogens and bacteria from water. RO also removes sodium, chloride, hardness, fertilizers, insecticides, ar-senic, heavy metals and many other contaminants. Most importantly, RO reduces total dissolved solids (TDS).

Roy standard production includes simple pretreatments as a sediment and carbon filter and more important as anti-scalent dosying system for very hard water in high efficiency RO systems.Other pretreatment methods are deter-mined through a water analysis.

THE SYSTEM:Typical ROY system consists of the fol-lowing stages:- Self carrying Structure - dimension 700x600x1400h.mm. in the standard version, built with steel inox AISI316 outlined, of quadrangular section 40x40mm knit between them. The structure is palletized in order to facili-tate the transport. - All the instrumentation, the gauges, the commandos and the emergency devices are dislocated on the facade of the system, in perspex of protection.

- Heavy duty 20” 5µm sediment filter- Carbon 20” pretreatment filter

- High pressure pump. Stainless steel until Roy-150 (220V 50-Hz). Up models (380V.)- ROY System includes from 3 to 8 reverse osmosis modules, pro-duction for standard models is 5000 - 60000 lt./days. Models with more high production on request. It’s possible to feed the system with high SDI water.- Automatic electronic system control display: - System in operation indicator - Conductivity inlet and outlet - Li-ghted On/Off controls - Pressure inlet- Automatic control of stand-by and cleaning of reverse osmosis membranes.- Optional: Control of system by remote P.C. with personalised software.- Optional: directly use of P.C. inside the system. For the elevated capacity of this system is very important water feeding analysis for the choice of the right pretreatment system. In such sense they are available high capacity Water softners, Dechlorine and automatic system for the removal of Iron, Man-ganese and other.

ROY Reverse Osmosis Systems

Page 17: General Catalogue Labeau T.Engineering co

17www.labeau-tn.com - [email protected] - Tel:+216-27045506

SYSTEM CONTROLThe system is controlled from a sophisticated unit LW2 that supplies to the verification of single parameters in order to assure and to verify continuously the operation.

Main Features:- Acustic and visual Alarm - Inlet/outlet pressure - Display of TDS/Conductivity, pH, Temperature C° and % of recovery - Total hour meter - Membranes auto flush system and built-in cleaning system- System automatic rifle tank level control- The equipment is factory tested and sterilized prior to shipment- Alla components are high quality with FDZ/NSF approval

LW3 - REMOTE SYSTEM CONTROLOptional interface RS232 of unit LW2 concurs to send the information to Personal Remote Computers, Display or Printing. An appropriate program studied for these applications concurs to display on the PC video or remote display, the single operations of any particular of the system. The data received can be stored for future uses and for studying particular operating programs of maintenance.

RoSys rangeRosys range, includes standard systems from 6 to 60m3/day that can satisfy the greatest part of the requirements.More elevating productions are realized with systems derived from the standard production. In these cases we can prepare a customized detailed plan.

SISTEMA DI CONTROLLOIl sistema è controllato da una sofisticata unità LW1 che provvede alla verifica di singoli parametri per assicurare e monitare continuamente il funzionamento.

Caratteristiche principali:- Allarme acustico e visivo- Visualizzazione pressione ingresso/uscita- Visualizzazione di TDS/Consucibilità, pH, Temperatura C° e % di recovery- Display contaore totalizzatore- Sistema automatico di lavaggio delle membrane- Sistema automatico controllo di livello serbatoio/i

SISTEMA DI CONTROLLO REMOTO LW3-remoteL’interfaccia opzionale RS232 dell’unità LW3 consente di inviare informazioni a Personal Computer, Display Remoti o Stampanti. Un apposito programma studiato per queste applicazioni consente di monitorare sul video del PC o su diplay remoto, il correto funzionamento di ongi singolo particolare del sistema.I dati ricevuti possono essere memorizzati per utilizzo futuro e per la messa a punto di particolari programmi operativi di manutenzione.

La gamma ROYLa gamma ROY, comprende sistemi standard da 6 a 60mcq/giorno in grado di soddisfare la maggior parte delle esigenze. Per produzioni superiori vengono realizzati sistemi derivati dalla

produzione standard con portate anche molto elevate. In questi casi viene realizzato un progetto dettagliato.

Controller LW1

Controller LW2 Opzionale

Page 18: General Catalogue Labeau T.Engineering co

18 www.labeau-tn.com - [email protected] - Tel:+216-27045506

I sistemi ROC producono Acqua pura eliminando il 98% dei sali contenuti nell’acqua da trattare ed oltre il 99% dei Colloidi e delle sostanze organiche.

PRINCIPIO FUNZIONAMENTO:I sistemi ROC sono basati sull’utilizzo della tecnologia dell’o-smosi inversa. L’acqua da trattare dopo aver subito un primo pretrattamen-to mediante carbone attivo per l’eliminazione di sostanze clorurate, subisce una filtrazione meccanica per trattenere particelle >5µm. e quindi viene inviata ad elevata pressione attraverso una membrana ad osmosi inversa con una rea-zione tipica >98%

COMPOSIZIONE DEL SISTEMA:

I sistemi ROC sono costituiti da i seguenti elementi:

- Struttura autoportante di dim. cm.50x45x70h., formata da profilati in acciaio inox AISI316 elettrosaldati e da pannelli di chiusura in alluminio anodizzato.

Tutti gli strumenti, i manometri e quanto occorre per il controllo del sistema sono situati sul frontale del sistema, in perxpex di protezione.

Tutte le parti elettriche sono contenute in un quadro stagno IP55.

- Prefiltro di sicurezza da 5µm.- Prefiltro Carbone Anticloro - Pompa di alimentazione per pressioni da oltre 10Atm.- Moduli ad Osmosi Inversa per produzioni da 300 a 6000

lt./giorno consentono l’alimentazione con acqua di rete ad alto SDI (Salt Density index)

- Modulo automatico con stand-by per il rinnovvo inter-mittente dell’acqua durante le soste prolungate fra i prelievi

- Conducimetro di precisione per la misura continua della qualità dell’acqua di rete.

Industry, Laboratory, Research

ROC Systems produce pure water eliminating 98% of salts contained in the water to deal and beyond 99% of Colloids and the organic substances.

PRINCIPLE OPERATION: ROC systems are based on the use of the technology of the reverse osmosis. The water to deal after a first pretreatment by active carbon for the elimination of chlorinated substances, pass through a mechanical filtration in order to withhold particles > 5µm. and therefore with high pressure through reverse osmosis membrane with typical reaction > 98%.

The System:

ROC system are structured as follow::

- Assembled on stainless steel skid - dimension cm.50x45x70h.,with panels of closing in anodized alu-minum.

- All the instruments, the gauges and how much are ne-cessary for the control of the system are situated on the front panel of the system, in perxpex of protection.

All the electrical parts are installed in a IP55 box. - 5µm safety praefilter.- Clorine carbon filter- Booster pump for 10bar working pressure- Reverse Osmosis module to produce from 300 to 6000

lt./days (24h) also with high SDI feed water (Salt Density index)

- Automatic membrane water changing to assicure a long membrane’s life.

- A high precision conductimeter display water quality production.

ROC - Reverse Osmosis Systems

Page 19: General Catalogue Labeau T.Engineering co

19www.labeau-tn.com - [email protected] - Tel:+216-27045506

APPLICAZIONI:

DOMESTICO: Alberghi, Villaggi turistici, Residence, Comunità, Impianti di Condizionamento e Umidificazione

INDUSTRIA:Alimentare, Chimica, Cosmetica, Elettronica - lavaggio componenti, Farmaceutica, Industria di stampa offset - Per lavaggio di componentistica, materiali, etc.

ARTIGIANALE:Laboratori di produzione artigianale, Panifici, Gelaterie

AGRICOLTURA:Coltivazioni, Piantagioni, Vivaistica, Serricoltura, etc.

LABORATORIO: Acqua per gli usi generali - tipo Astm III, Lavaggio vetreria e strumenti, Alimentazione deionizzatori (vedi serie LAB)Alimentazione sistemi per produzione acqua ultrapura.

Per tutte le applicazioni che richiedono acqua di qualità.

Azione tipica di ROCTypical Reverse Osmosis action

APPLICATIONS:

DOMESTIC: Hotels, Turistic Villagge, Residance, Comunity, For umidifi-cation and Condition plant

INDUSTRIAL:Alimentary, Chemical, Cosmetic, Electronic - washing component, Pharmaceutics, Industry of Offset press - For parts and materials washing.

HANDICRAFT:Laboratories of handicraft production, Bakeries, Icecream

AGRICULTURE:Cultivations, Plantations, Greenhouse cultivations, etc.

LABORATORY: General purpose - Astm III type, Glassware and instruments washing, Deionisers feeding (see LAB series)Feed water ultrapurification system in all application for high quality water.

Our Production- ROS RO System 6000-60000lt/day- ROY RO System 5500-6000 lt/day- ROC RO System 300-6000 lt/day- Automatic Deionisers twice bed Serie AD- Mixed bed Deionisers LAB Series- Softner- Filtration system- Personalisation

Serie Ro-Compact -SeriesCodice-Code 11-009560 11-009570 11-009580 11-009590 11-009600 11-009610 11-009620Modello-Model A30 A50 A80 A120 A200 A400 A600Prod.lt/gg.* lt/day 348 500 800 1.200 2.000 4.000 6.000Prod.lt/h.* 14,5 21 33 50 83 167 250Pres.lavoro-Working 10 bar 10 bar 10 bar 10 bar 10 bar 10 bar 10 barPres.Min. 2 bar 2 bar 2 bar 2 bar 2 bar 2 bar 2 barPres.Max 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar 6 barTemp./Temp. 3-40°C 3-40°C 3-40°C 3-40°C 3-40°C 3-40°C 3-40°CSDI 3 3 3 3 3 3 3Turbidità-Turbidity < 1 NTU < 1 NTU < 1 NTU < 1 NTU < 1 NTU < 1 NTU < 1 NTUAlim.TDS < 2000 mg/l < 2000 mg/l < 2000 mg/l < 2000 mg/l < 2000 mg/l < 2000 mg/l < 2000 mg/lAlim.pH 4-11 4-11 4-11 4-11 4-11 4-11 4-11Motore Pompa - Pump 1/2 1/2 1/2 1/2 1/2 3/4 3/4Aliment. - Power 220V 220V 220V 220V 220V 220V 220V* @ 25°C - max. TDS 2000 mg/l.

Page 20: General Catalogue Labeau T.Engineering co

20 www.labeau-tn.com - [email protected] - Tel:+216-27045506

Gli Addolcitori d’acqua automatici della serie SoftPure-I sono disponibili in differenti versioni con portate da 8000 fino a 42000lt/h. e con capacità ciclica compresa tra 17000 e 83000 lt. a 30°F. di durezza.Sono completamene automatici, con sistema di rigenerazione a tempo (in alternativa volumetrico) mediante utilizzo di cloruro di sodio.Con il passaggio dell’acqua attraverso un letto di resine sintetiche, i sali di calcio e di magnesio vengono trattenuti, eliminando così la durezza in eccesso che è la principale causa di incrostazioni della rete idrica, di caldaie, bollitori, elettrodomestici e rubinetterie.  Possono essere impiegati in applicazioni domestiche (im-pianti centralizzati di condomini) perfettamente conformi alla normativa vigente o in campo industriale.In campo domestico i benefici dell’assenza del calcare nell’acqua sono: risparmio del 50 % di detersivi, maggiore morbidezza degli i n - dumenti, cottura dei cibi più veloce con risparmio

di energia, miglior sapore dei cibi, capelli ed e p i d e r - mide più morbide dovuto

alla mancanza di parti-celle insolubili, completa efficienza di tubazione, caldaie ed impianti per il riscaldamento dell’ ac-qua, ecc. Tuttavia gli addolcitori Softpure vengono impiegati anche in campo commerciale o industriale come sistemi di pretrattamento per impianti ad osmosi inversa, o

per addolcire acque di utilizzo industriale onde accrescere l’ef-ficienza di tubazione, caldaie, impianti per il riscaldamento dell’ acqua, ecc. Per utilizzo domestico, aggiun-

gere sempre cod.11-008911 il produttore di cloro necessario per la sterilizzazione delle resine e conforme alla legge n.443 del

31.12.90.

SoftPure-LV.I - Softner

SoftPure-I are automatic water softeners available in different versions with ca-pacities from 8000 until 42000lt/h. and with comprised cyclical capacity between 17000 and 83000 lt. to 30°F. of hardness. These Softner are fully automatic, with

time system regeneration (optional volumetric) by using chloride of sodium. The water passes through a synthetic resin bed, calcium and magnesium salts are kept, so that the hardness in excess, that is the main cause of incrustations of the water network, of boilers, kettles, household-electric and taps is eliminated.

They can be employed in domestic applications (centralized systems of condominium) because they are conform to actual regulations. In domestic field the benefits of the absence of the limestone in the water are: saving of 50 % of detergents, clothes more soft, faster cooking of foods with saving energy, better taste of foods, softer hairs and skin thanks to the lack of insoluble particles complete efficiency of pipes, boilers and systems for the heating of water, ecc.

The Softpure-I water softners are employed also in commercial or industrial field as pretreatment for reverse osmosis system, or in order to sweeten waters for industrial purpose to increase the efficiency of pipes, boilers, systems for the heating of water, etcFor domestic applications, you have to add code 11-008911 - clorine producer, for resines sterilization.

Page 21: General Catalogue Labeau T.Engineering co

21www.labeau-tn.com - [email protected] - Tel:+216-27045506

Gli Addolcitori d’acqua automatici della serie SoftPure-D sono disponibili in differenti versioni con portate da 800 fino a 2500lt/h. e con capacità ciclica compresa tra 1800 e 7500 lt. a 30°F. di durezza. Sono completamene automatici, con sistema di rigenerazione a tempo (in alter- nativa volumetrico) mediante utilizzo di cloru-ro di sodio.Con il passaggio dell’acqua attraverso un letto di resine sintetiche, i sali di calcio e di magnesio vengono trattenu-ti, eliminando così la durezza in eccesso che è la principale causa di incrostazioni della rete idrica, di caldaie, bollitori, elet-trodomestici e rubinetterie. Possono essere impie-gati in applicazioni domestiche perfettamente conformi alla normativa vigente.In campo domestico i benefici dell’assenza del calcare nel-l’acqua sono: risparmio del 50 % di detersivi, maggiore morbidezza degli indumenti, cottura dei cibi più veloce con risparmio di energia, miglior sapore dei cibi, capelli ed epi-dermide più morbide dovuto alla mancanza di particelle insolu-bili, completa efficienza di tubazio-ne, caldaie ed impianti per il riscalda-mento dell’ acqua, ecc.

Tuttavia gli addolcitori Softpure vengono impiegati anche in campo commerciale o industriale come si-stemi di pretrattamento per impianti ad osmosi inver-sa, o per addolcire acque di utilizzo industriale onde accrescere l’efficienza di tubazione, caldaie, impianti per il riscaldamento dell’ acqua, ecc.

Per utilizzo domestico, aggiungere sempre cod.11-008911 il produttore di cloro necessario per la ste-rilizzazione delle resine e conforme alla legge n.443 del 31.12.90.

SoftPure-LV.D - Softner

SoftPure-D are automatic water softners available in different versions with capacities from 800 until 2500lt/h. and with comprised cyclical capacity between 1800 and 7500 lt. to 30°F. of hardness. These Softner are fully auto-matic, with time system regeneration (optional volumetric) by using chloride of sodium. The water passes through a synthetic resin bed, calcium and magnesium salts are kept,

so that the hardness in excess, that is the main cause of incrustations of the water network,

of boilers, kettles, household-electric and taps is eliminated.

They can be employed in domestic applications (centralized systems of condominium) because they are conform to actual regulations. In domestic field the benefits of the absence of the limestone in the water are: saving of 50 % of detergents, clothes more soft, faster cooking of foods with saving energy, better taste of foods, softer hairs and skin thanks to the lack of insoluble particles complete efficiency of pipes, boilers and systems for the heating of water, ecc.

The Softpure water softners are employed also in commercial or industrial field as it arranges of pretreatment for reverse osmosis system, or in order to sweeten waters for industrial purpose to

increase the efficiency of pipes, boilers, systems for the heating of water, ecc

For domestic applications, you have to add code 11-008911 - clorine producer, for

resines sterilization.

Page 22: General Catalogue Labeau T.Engineering co

22 www.labeau-tn.com - [email protected] - Tel:+216-27045506

The Sand Filter - Softpure S are mechanical filter useful to remove particle and media from water.

Product• All filters are guaranteed and do not use chemical media• All filters are easy to use and do not require consumables• These are ideal as pre-treatment for water softeners, re-verse osmosis (RO), distiller and granular activated carbon (GAC), and ultraviolet disinfection (UV) • All filters are of the highest construction quality • Simple customer installation • Technical support and product manuals

Application The Sand water filters have several applications from emer-gency use to agriculture. Systems have already been desi-gned for:

• emergency and relief use • household use - communities, resorts and camps • lake, river, stream, pond, dugout, spring and well water • livestock watering applications - acerages and farms • cottage and vacation home use - rainwater

Filtri a Sabbia - Sand Filters-SA

I filtri a sabbia - Softpure Ssono filtri meccanici utili per rimuovere particelle e sostanze grossolane.

Produtto• Tutti i filtri sono garantiti e non impiegano sostanze chimi-che per il funzionamento.• Sono semplici da utilizzare e non è richesto alcun ricam-bio • Sono ideali come sistemi di pretrattamento per addolcito-ri, osmosi inversa, distillatori, decloratori, e debatterizzatori.• Tutti i filtri sono costruiti con elementi di elevata qualitàInstallazione molto semplice e guidata dal manuale d’uso.

ApplicazioniI filtri a sabbia hanno molteplici applicazioni, dalle emergenze all’agricoltura, alcuni di questi sono: • Villaggi e residence• Alberghi, comunità e campeggi• Situazioni di emergenza• Agricoltura, industria,

Page 23: General Catalogue Labeau T.Engineering co

23www.labeau-tn.com - [email protected] - Tel:+216-27045506

UV Sterilizing systems - UV-S Series

Page 24: General Catalogue Labeau T.Engineering co

24 www.labeau-tn.com - [email protected] - Tel:+216-27045506

Sistemi Di Debatterizzazione Labeau T.

I sistemi di Debatterizzazione Labeau T. serie UV-S sono adatti per un utilizzo sia domestico che indu-striale. Sono alimentati a bassissima tensione ed espressamente progettati per garantire la massima sicurezza operativa. Tutte le parti a contatto con il fluido sono realizzate in acciaio inox con finitura sa-nitaria o in vetro di quarzo ultrapuro, a garanzia della massima igienicità. Sono progettati per provvedere alla sterilizzazione dell’acqua con una portata da 200 a 6000lt/h. - E possono essere impiegati per completare impianti di trattamento già esistenti quali decloratori, addolci-tori, etc.

Camera di debatterizzazione: Completamente in acciaio AISI 316L con finitura sanitaria. Flangie di pu-lizia rimovibili, standard su tutti i modelli. Connessioni speciali o sanitarie su richiesta.Lampade e quarzi: Tutti gli sterilizzatori sono equi-paggiati con lampade a vapori di mercurio a bassa pressione. Per la protezione della lampada vengono utilizzati tubi estrusi in quarzo ultrapuro, con permea-bilità minima del 95% a 2573 A.Quadro elettrico: Tutti i quadri elettrici sono eseguiti in conformità agli standard industriali, certificati a norme CEI, corredati di esclusivi ballasts elettronici che garantiscono un incremento medio del 15% nella durata di vita delle lampade.

UV Sterilizing systems - UV-S Series

UV-S sterilizing systems are adapted for industrial and domestic use. The whole range of systems work with ballast and lamps at low tension, exclusively designed to guarantee the maximum security. All the parts in touch with the fluid are made in stainless steel, with sanitary finish, or ultrapure quartz to guarantee the maximum hygienic security.Uv Sterilizing systems are designed to sterilize water at a flow rate of 0,2 - 230 m.3/h.and they can be used together with reverse osmosis system, softne-res, etc.

Sterilizing chamber: Completely made of steel AISI 316L with sanitary finish. Removing cup to allow inside entering.. Discharge for drain and cleaning chamber on each model. Lamps replacement can be effected without releasing hydric system. Chamber with sanitary connections or custom can be supplied when required.

UV-lamps and quartz: Strahl UV-sterilizing systems use mercury steam lamps at low pressure, with ultrapure quartz pipe. Easy installation lamps, extremely compact. For lamps protection they use ultrapure quartz with a minimum permeability of 95% at 2537

Electrical system: The electrical boards are conform to industrial standard, include the ballasts together with our exclusively designed control system which allows a medium rise of 15% in lamps life.

UV Sterilizing systems - UV-S Series

Page 25: General Catalogue Labeau T.Engineering co

25www.labeau-tn.com - [email protected] - Tel:+216-27045506

Page 26: General Catalogue Labeau T.Engineering co

26 www.labeau-tn.com - [email protected] - Tel:+216-27045506

LAB Series Deionisers with cylinder to load sostituibile are the best solution (relationship quality the price) and most practical in order to obtain water with the guarantee of one inferior conductivity to 0,5µS/cm.

Operation Principle

LAB series cylinders contain mixed bed cationic-anionic jonic exchange resines of elevated qualitative degree. The water to deal passes through such resins that withhold inorganic salts.

The ionization process consists in a process of chemical type for which the cationic resin removes the cationis (sodio, magnesium,

soccer, etc.) that they come replaced with ione hydrogen (H+); the anionic resin removes anions (chlorides, sulfates, nitrites, bicarbonates, etc.) that they come replaced with ione idrossile (the OH -).

The Ionian idrossili are arranged with those of hydrogen and form water (H2O).

LAB SeriesLab series is formed by six models, with an acronym that ne characterizes the type and the ability. In the following outline

the parameters of every model are brought back in order to facilitate the selection for your requirements.

CharacteristicsEvery LAB deionisers consist in:- a strong vessel with mixed bed jonic exchange resines.- an electronic control system in plastic case, fixable on cylynder or on the wall, this water quality meter constantly displays resistivity - a visual alarm signals that produced water is not accordant with the prefixed quality so to gua-rantee the high quality of the water.

Selection Of The Model The choice of the model must be reported to the habitual consumptions previewed and to the determination of the medium quality of the your network water.The consumptions must be based on daily requirementes, weekly

magazine and salary and making the average.The quality of the water of varied network from zone to zone and secondoi seasonal periods, is important to quantify the solid amount total dii disciolti (TDS); the following table evidence the duration of loads with a cylinder.You have to test quality of water where you feed the deionizer by a sali-nometer (TDS scale).You must find corrispondent value or the nearest in TDS 100, 200, 400, 600 and read in the column the liters of deioniser water product by the model on the left. Consider montly quantity need to avoid a more frequently regeneration. For example: TDS Feed water 200 = water month need 3000 lt. - The right model is LAB30 o upper model.Note: Model LAB70 and LAB100 are very heavy.

RegenerationTo regeneration of resins exausted of the cylinders will be made by the specialistic staff of Labeau T. so as to to guarantee one long-lasting quality.

I Deionizzatori SERIE LAB con cilindro a carica sostituibile sono la mi-gliore soluzione (rapporto qualità prezzo) e la più pratica per ottenere acqua con la garanzia di una conducibilità inferio- re a 0,5µS/cm.

Principio di FunzionamentoI cilindri della serie LAB contengono all’interno un letto misto di resine a scambio jonico cationi-che ed anioniche di elevato grado qualitativo. L’acqua da trattare passa attraverso tali resine che trattengono i sali inorganici.Il processo di ionizzazione consiste in un pro-cesso di tipo chimico per cui la resina cationica rimuove i cationi (sodio, magnesio, calcio, etc.) che vengono sostituiti con lo ione idrogeno (H+); la resina anionica rimuove gli anioni (cloruri, solfati, nitriti, bicarbonati, etc.) che vengono sostituiti con lo ione idrossile (OH-).Gli ioni idrossili si combinano con quelli di idro-geno e formano acqua (H2O).

La Linea LabI deionizzatori serie LAB sono divisi in sei modelli con una sigla che ne individua il tipo e la capa-cità.Nello schema seguente sono riportati i parametri di ciascun modello per facilitare la selezione di quello più adatto alle Vs. esigenze.

CaratteristicheOgni deionizzatore LAB è composto da:- un cilindro robusto in vetroresina che contiene il letto misto.- un modulo elettronico di controllo in contenitore protetto, fissabile a parete o sul cilindro, dotato di un display a cristalli liquidi che visualizza in continuo la qualità dell’acqua prodotta.- un allarme visivo provvederà ad indicare che l’erogazione dell’acqua non corrisponde alla qualità prefissata dando garanzie che l’acqua raccolta è purificata.

Selezione Del Modello La scelta del modello deve essere riferita ai consumi abituali previsti e

alla determinazione della qualità media della Vs. acqua di rete.Misurate con un conducimetro/salinometro (TDS) la qualità dell’acqua della Vs. rete, a cui collegherete il Deionizzatore LAB. Individuate la colonna della tabella in cui appare tale valore (o che si avvicina di più). I dati della colonna indicano i lt. prodotti da ogni singolo modello. Il vs. fabbisogno dovrebbe essere calcolato su un base mensile, non è consi-gliabile infatti una rigenerazione più frequente.esempio: acqua di rete 200TDS - consumo mensile di acqua 3000lt. - il modello giusto è il LAB30 o superiori.N.B. Nella scelta del modello deve essere considerato anche il suo peso. Infatti i LAB70 e LAB100 richiedono generalmente attrezzature idonee per la loro movimentazione.

La RigenerazioneAlla rigenerazione delle resine esaurite dei cilindri provvederà il personale specializzato di Labeau T. in modo da garantire una qualità duratura. Si elimina così per il cliente l’uso di sostanze pericolose quali acidi e soda necessari alla rigenerazione.

Modello Qualità acqua alimentazione Portata

TDS100F°10

TDS200F°20

TDS400F°40

TDS600F°60 lt./h.

LAB10 1500 750 350 250 100

LAB15 2800 1400 700 450 200

LAB20 3500 2000 1000 650 250

LAB30 6000 3000 1500 1000 300

LAB50 9000 4500 2250 1400 400

LAB70 13000 6500 3250 2300 450

LAB100 18500 9000 4500 2700 600

LAB SEIES - DEIONISERS

Page 27: General Catalogue Labeau T.Engineering co

27www.labeau-tn.com - [email protected] - Tel:+216-27045506

The use of dangerous substances is eliminated therefore for the customer (It is not necessary acids and hard to regeneration).In order to assure the continuity in the production is advised therefore to the purchase of a cylinder of reservoir also but to guarantee the necessary times in waited for the regeneration of the first one.

In order to assure the continuity in the production is advised therefore to the purchase of a cylinder of reservoir also but to guarantee the necessary times in waited for the regeneration of the first one.

AdvantagesGuaranteed water production purified.Work pressure until 6 atm. Without losses.Without regeneration on the place avoiding the use of dangerous products.It does not demand special accessoriesModest investment.

Applications Directly production from tap waterUsefuel in laboratory: for it employs common, glassware or instruments washing and therefore feeding of machines for washing, preparation of solutions, sample, etc. when is not demanded an high qualitative degree and is not necessary also an organic purification.For feeding of analysis automatic systems. Produced water can ulte-riorly be purified with special resins. Produced water therefore can be used for the ultrapure water production.

Deioniser ProcessThe Deioniser resins Ionic exchange remove only the inorganic substan-ces. The microorganisms and the particles can be removed with a 0,2 µm. membrane filter.Organic substances can be eliminated by reverse osmosis systems or by ultrapurification systems.

Inorganic Substances Cations: Sodium+, Potassium+, Ammonium+, Megnesio++, Calcio++, Stronzio++, Managanese++, Ferro++

Anions: Fluoruro-, Cloruro-, Nitriti-, Nitrati-, Idrogeno Fosfato-, Idrogeno Carbonato-, Acido Silicico

The Conducimeter

Every LAB Deionisers has in equipment an high precise instrument to test the conductivity, with display LCD. The conductimeter is equipped with alarm that is possible to set on the own requirements; a red led display the alarm situation.The conductimeter is equipped with a probe with automatic compensa-tion of the temperature. Power supply is 12V DC to guarantee the safety of operator. Its scale is from 0.00 to 19,99µS/cm; on request model B is available for industrial uses with scale 0 - 1990µS/cm.

Page 28: General Catalogue Labeau T.Engineering co

28 www.labeau-tn.com - [email protected] - Tel:+216-27045506

AUTOMATIC WATER DEIONIZERS

The water deionizers mod. DeiAuto re fitted with 2 separated bed columns containing cationic and anionic resins and having a high exchange power.

Unlike other sophisticated units, their construction is simple, functional and reliable; its components are tested,

long lasting and require a minimum maintenance.

All components are made of acid-resi-stant material.

The jonic exchange resins are contai-ned in two vinylester bottles resistant to water pressure.

An electronic meter (fitted with an alarm signal that can be calibrated) ensures a costant control of the treated water and indicates when the resins need rigeneration; on request, it is possible to stop the delivery automa-tically or discharge the water having an insufficient purity degree.

Regeneration of the resins is started by simply pushing a button and it is

performed quite automatically; on request, regeneration can be started automatically when the purity degree of water is below the preset value.

Each unit is fitted with two plastic continers for the regenerants that are directly drawn from the contianers placed on the floor.

In case of current failure the rigeneration can be manually performed.

DEIONIZZATORE AUTOMATICI

I deionizzatori automatici Dei-Auto, sono a due colonne a letti separati contenenti resine catio-nica ed anionica ad alta capacità di scambio.

Diversamente da altri sistemi più sofisticati, la loro costruzione èmolto semplice, così com e il loro funzionamento a l’affidabilità.

Tutti i componneti sono testati ed è richiesta una minima manutenzione.

Le resine scambio jonico sono contenuto in due vessel in fiberglass, resistenti alla pressione idrica.

Un misuratore elettronico dotato di segnale di allarme tarabile, assicura un costante controllo dell’acqua trattata ed indica quando si deve procedere alla rigenerazione delle resine; possibilità (a richiesta) di bloccaggio automatico dell’erogazione o di invio allo scarico dell’acqua con purezza insufficiente.

E’ sufficiente premere un pulsante per avviare la rigenerazione delle resine che avviene in modo completamente automatico.

Completo di due contenitori per la rigenerazione.

Codice Cap.ciclica Dim.mm.(gr.CaCO3) Min. Max. Hcl 33% NaOH30% Cat. Anio. l.x p.x h.

11-009001 1050 180 900 7 9 25 30 1450x400x160011-009002 1800 300 1400 13 15 45 50 1450x400x180011-009003 2600 450 2100 19 22 65 75 1500x450x185011-009004 3500 600 2800 27 30 90 100 1650x450x210011-009005 5250 800 4000 40 45 135 150 1800x500x200011-009006 7700 1300 6000 60 65 200 220 2200x950x190011-009007 9800 1700 7500 75 84 250 280 2200x950x2000

Vol.resineRigeneranti (Kg.)Portata (lt/h.)

AUTOMATIC DEIONISERS - DEI AUTO

Page 29: General Catalogue Labeau T.Engineering co

29www.labeau-tn.com - [email protected] - Tel:+216-27045506

RO-W SPECIAL SYSTEM

Sistema Mobile Lavaggio Equipaggiamenti Petroliferi

Questo sistema è in grado di produrre acqua purificata, virtualmente priva di sali direttamente da pozzi, fiumi, laghi, etc. con salinità max. di 3000mg/l. Tuttavia è possibile realizzare impianti personalizzati anche per salinità superiori.

Il sistema comprende:n .1 pompa sommersa per d i re t ta alimentazionen.1 filtro da 5um di pretrattamenton.1 sterilizzatore UV di pretrattamenton.1 unità dosaggio antiscalanten.1 unità ad osmosi inversa capacità: 20/30 m3/gg.n.1 serbatoio di accumulo in acc.inox lt.5000n.1 unità di lavaggio composta da idropulitrice con avvolgitubo n.1 sistema CIP per lavaggio/manutenzione sistema

modellomodel

produzionecapacitym3/day

DimLxPxh. mm.

pesokg.

SerbatoioTank

RO-W20K 20 3500x1000x1600 350 5000

RO-W30K 30 3500x1000x1600 550 5000

RO-W40K 40 3500x1200x1600 700 5000

Ro-W50K 50 3500x1200x1600 850 5000

Mobile System Oil Equipements Washing

This system is able to produce purified water, practicaly without salts, directly from wells, river, lakes, etc. with salinity = max. 3000mg/l.Furthermore it’s possible design personalized systems to work with higher salinity.

The system includes:n.1 immersion pump to direct water feedn.1 pretreatment 5um. filtration unit n.1 Antiscalant Dosing unitn.1 Reverse Osmosis unit with capacity: 20/30 m3/dayn.1 Storage Stainless Steel tank with capacity 5000lt.n.1 washing unit includes a pressure washers with hose reel.n.1 CIP unit for system washing and maintenance

Page 30: General Catalogue Labeau T.Engineering co

30 www.labeau-tn.com - [email protected] - Tel:+216-27045506

LABEAU TUNISIE

Page 31: General Catalogue Labeau T.Engineering co

31www.labeau-tn.com - [email protected] - Tel:+216-27045506

Page 32: General Catalogue Labeau T.Engineering co

32 www.labeau-tn.com - [email protected] - Tel:+216-27045506

LABEAU TUNISIE sarl - TUNISWater Treatment Systems Production

www.labeau-tn.com - [email protected] - 5 rue Imam Abu Hanifa - 02083 La Petite Ariana

Tel.+216-27045506 LABE

AU08

0121

00 0

1/13

Prin

ted

in tu

nisie