ELENCO DELLE PUBBLICAZIONI - raffaelelandolfo€¦ · A.42 Landolfo R. Construction parasimique en...

Prof. Dr. Ing. RAFFAELE LANDOLFO e-mail: [email protected]

__________________________________________________________________________________

ELENCO DELLE PUBBLICAZIONI

Prof. Dr. Ing. R. Landolfo Elenco delle Pubblicazioni 2/38

___________________________________________________________________________________

SIMBOLI E CONVENZIONI

Le pubblicazioni riportate nel presente elenco sono suddivise in raggruppamenti omogenei secondo il

seguente schema:

A. Pubblicazioni su riviste internazionali

B. Pubblicazioni su riviste nazionali

C. Atti di Congressi e Workshop internazionali

D. Atti di Congressi e Workshop nazionali

E. Capitoli di libri internazionali e nazionali

F. Libri

G. Rapporti di ricerca e documenti normativi

H. Varie

Nell’ambito di ogni raggruppamento, sono indicati per ogni pubblicazione:

numero progressivo di identificazione, in ordine cronologico;

autore/i;

titolo (in corsivo) e riferimento (rivista, congresso, luogo, anno, etc);

L’asterisco (*) contraddistingue:

- pubblicazioni su riviste nazionali di articoli già pubblicati su riviste internazionali o nazionali

- atti di congressi pubblicati successivamente su riviste


___________________________________________________________________________________

A. PUBBLICAZIONI SU RIVISTE INTERNAZIONALI

A.01 Landolfo R.

Mazzolani F. M.

Sur le comportement au flambement des profils tubulaires formés à froid (Construction Métallique, n. 4, France, 1990, pp. 23-29).

A.02 De Martino A. Landolfo R. Mazzolani F. M.

The use of the Ramberg-Osgood law for materials of round-house type (Materials and Structures, n. 23, France, 1990, pp. 59-67).

A.03 Landolfo R. Mazzolani F. M.

The influence of the variation through the thickness of residual-stresses in tubular columns (Journal of Constructional Steel Research, Vol. 19, n. 1, Elsevier Science Limited, Great Britain, 1991, pp. 49-57).

A.04 Ghersi A. Landolfo R. Mazzolani F. M.

Buckling modes of double-channel cold-formed beams (Thin-Walled Structures 19, Elsevier Science Limited, Great Britain, 1994, pp. 353-366).

A.05 Mazzolani F. M. De Matteis G. Landolfo R.

On the shear flexibility of corrugated steel panels (Steel Structures, Journal of Singapore Structural Steel Society, Vol. 6, 1995, pp.103-111).

A.06 Landolfo R. Mazzolani F. M.

Different approaches in the design of slender aluminium alloy sections (Thin-Walled Structures, Elsevier Science Limited, Great Britain, Vol.17, No. 1, 1997, pp.85-102).

A.07 De Matteis G. Landolfo R.

Structural behaviour of sandwich panel shear walls: An experimental analysis (Materials and Structures, Vol. 32., 1999, pp. 331-341).


Mechanical fasteners for cladding sandwich panels: interpretative models for shear behaviour (Thin-Walled Structures, Elsevier Science Limited, Vol. 35, No. 1, 1999, pp.61-79).

A.09 Moen L.A. De Matteis G. Hopperstad O.S. Langseth M. Landolfo R. Mazzolani F.M.

Rotational capacity of aluminum beams under moment gradient. II: Numerical simulations (Journal of Structural Engineering, ASCE, Vol. 125 No.8, August 1999, pp.921-929).


Modelling of lightweight sandwich shear diaphragms for dynamic analyses (Journal of Constructional Steel Research, Vol. 53, Elsevier Science Limited, Great Britain, 2000, pp. 33-61).

A.11 De Matteis G. Mazzolani F.M. Landolfo R. Milev J.

Q-factor evaluation of moment resisting steel frames with semi-rigid connections by applying different approaches" (Acta Polytechnica, Journal of Czech Technical University, Vol.39, No. 5, 1999, pp.183-194).


Diaphragm action of sandwich panels in pin-jointed steel structures: a seismic study (Journal of Earthquake Engineering, Vol.4, No.3, 2000, pp.251-275).

A.13 Calado L. De Matteis G. Landolfo R.

Experimental response of top and seat angle semi-rigid steel frame connections (Material and Structures, Vol.33, 2000, pp.499-510).


A.14 De Matteis G. Moen L.A. Langseth M. Landolfo R. Hopperstad O.S. Mazzolani F.M.

Cross-sectional classification for aluminum beams - Parametric study (Journal of Structural Engineering, ASCE, Vol. 127(3), 2001, pp.271-279).

A.15 Della Corte G. De Matteis G. Landolfo R. Mazzolani F.M.

Seismic analysis of MR steel frames based on refined hysteretic models of connections (Journal of Constructional Steel Research, Vol. 58, Elsevier Science Limited, Great Britain, 2002, pp. 1331-1345).

A.16 De Matteis G. Landolfo R. Mazzolani F.M.

Seismic response of MR steel frames with low-yield steel shear panels (Engineering Structures, Vol. 25, Elsevier Science Limited, Great Britain, 2003, pp.155-168).

A.17 Della Corte G. Landolfo R. Mazzolani F.M.

Post-earthquake fire resistance of moment resisting steel frames (Fire Safety Journal, Vol.38., Elsevier Science Limited, Great Britain, 2003, pp. 593-612).

A.18 Di Lorenzo G. Landolfo R.

Shear experimental response of new connecting systems for cold-formed structures (Journal of Constructional Steel Research, Vol. 60, Elsevier Science Limited, Great Britain, 2004, pp. 561-579).

A.19 De Matteis G. Landolfo R. Manganiello M. Mazzolani F.M.

Inelastic behaviour of I-shaped aluminium beams: numerical analysis and cross-sectional classification (Computers and Structures, Vol. 82, Elsevier Science Limited, Great Britain, 2004, pp. 2157-2171).

A.20 Faggiano B. De Matteis G. Landolfo R. Mazzolani F.M.

Behaviour of aluminium alloy structures under fire (Journal of Civil Engineering and management, Vol. X, No. 3, Vilnius, Lituania, 2004, pp. 183-190).

A.21 Manganiello M. De Matteis G. Landolfo R.

Inelastic flexural strength of aluminium alloys structures (Engineering Structures, Vol. 28, Elsevier Science Limited, Great Britain, 2006, pp. 593-608).

A.22 Della Corte G. Fiorino L. Landolfo R.

Seismic behavior of sheathed cold-formed structures: Numerical study (Journal of Structural Engineering, ASCE, Vol. 132, No.4, 2006, pp.558-569).

A.23 Landolfo R. Fiorino L. Della Corte G.

Seismic behavior of sheathed cold-formed structures: Physical tests. (Journal of Structural Engineering, ASCE, Vol. 132, No.4, 2006, pp.570-581).

A.24 Landolfo R. Di Lorenzo G. Guerrieri M.R. Mammana O. Portioli F.

The Umberto I Gallery in Naples: the influence of corrosion damage on the seismic performance of the iron roofing structure (Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 347, 2007, pp.345-350).

A.25 Fiorino L. Della Corte G. Landolfo R.

Experimental tests on typical screw connections for cold-formed steel housing (Engineering Structures, Vol. 29(8), Elsevier Science Limited, Great Britain, 2007, pp. 1761-1773).


A.26 Landolfo R. Mammana O. Portioli F. Di Lorenzo G. Guerrieri M.R.

Laser welded built-up cold-formed steel beams: experimental investigations (Thin-Walled Structures, Elsevier Science Limited, Vol. 46, Issue: 7-9, 2008, pp. 781-791).

A.27 Cascini L. Landolfo R. Portioli F.

An integrated approach to durability design of steel structures against atmospheric corrosion (Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 385-387, 2008, pp.657-660).

A.28 Mazzolani F.M. Landolfo R. Faggiano B. Esposto M. Perotti F. Barbella G.

Structural analyses of the Submerged Floating Tunnel prototype in Qiandao Lake (PR of China). (Advances in Structural Engineering, ISSN 1369-4332, Vol. 11, No. 4., 2008, pp. 439-454).

A.29 Landolfo R. Mammana O. Portioli F. Di Lorenzo G. Guerrieri M.R.

Experimental investigation on laser welded connections for built-up cold-formed steel beams (Journal of Constructional Steel Research, Elsevier Science Limited, Vol. 65, Issue: 7-9, 2009, pp. 196-208).

A.30 Fiorino L. Iuorio O. Landolfo R.

Sheathed cold-formed steel housing: A seismic design procedure (Thin-Walled Structures, Elsevier Science Limited, Vol. 47, 2009, pp. 919-930).

A.31 Landolfo R. Fiorino L. Iuorio O.

A specific procedure for seismic design of cold-formed steel housing (Advanced Steel Construction, Elsevier Science Limited, Vol. 6, 2010, pp. 603-618)

A.32 Krstevska L. Tashkov L. Gramatikov K. Landolfo R. Mammana O. Portioli F. Mazzolani F.

Large-scale experimental investigation on Mustafa Pasha Mosque (Journal of Earthquake Engineering, ISSN 1363-2469, Taylor & Francis, Vol. 14, 2010, pp. 842-873)

A.33 Landolfo R. Cascini L. Portioli F.

Modeling of metal structure corrosion damage: A state of the art report (Sustainability, ISSN 2071-1050, Vol. 2, 2010, pp. 2163-2175)

A.34 Della Corte G. Landolfo R. Mazzolani F. M.

Displacement-based seismic design of braced steel structures (Steel Construction Design and Research, ISSN 1867-0520, Vol. 3, September 2010, pp. 134-139)

A.35 D’Aniello M. Portioli F. Fiorino L. Landolfo R.

Experimental investigation on shear behaviour of riveted connections in steel structures (Engineering Structures, Elsevier Science Limited, ISSN 0141-0296, Vol. 33, February 2011, pp. 516–531)


A.36 Portioli F., Mammana O., Landolfo R., Mazzolani F. M., Krstevska L., Tashkov L., Gramatikov K..

Seismic Retrofitting of Mustafa Pasha Mosque in Skopje: Finite Element Analysis (Journal of Earthquake Engineering, Taylor and Francis group, ISSN: 1363-2469, Vol 15, May 2011, pp.620–639)

A.37 Della Corte G., D'Aniello M., Landolfo R., Mazzolani F.M.

Review of steel buckling-restrained braces (Steel Construction Design and Research, ISSN 0049-2205, Vol. 4, June 2011, pp. 85-92)

A.38 Landolfo R., Cascini L., Portioli F.

Sustainability of steel structures: towards an integrated approach to life-time engineering design (Frontiers of Architecture and Civil Engineering in China, ISSN 1673-7407, Volume 5, Number 3, September 2011, pp. 304-314)

A.39 Fiorino L., Iuorio O., Landolfo R.

Seismic analysis of sheathing-braced cold-formed steel structures (Engineering Structures, Elsevier Science Limited, ISSN 0141-0296, Volume 34, January 2012, pp. 538-547)

A.40 Landolfo R. Construction Parasismique, Plus fort que Poséidon! (Chantiers & Renovation, Publi Annonces SA, N° 3, March 2012, pp. 12-14)

A.41 D'Aniello M., Landolfo R., Piluso V., Rizzano G.

Ultimate behavior of steel beams under non-uniform bending (Journal of Constructional Steel Research, Elsevier Ltd., n. 78 (2012), p.p. 144 - 158

A.42 Landolfo R. Construction parasimique en acier (Construire en acier “Construction parasismique, Conception et dimensionnement”, Centre suisse de la construction métallique, Stahlbau Zentrum Schweiz, Centro svizzero per la costruzione in acciaio., n. 03+04/11 steeldoc, p.p. 8 – 18.

A.43 Landolfo R. Erdbebensicher Bauen in Stahl (Construire en acier “Erdbebensicher Bauen, Konzeption und Tragwerksplanung”, Stahlbau Zentrum Schweiz, Centre suisse de la construction métallique, Centro svizzero per la costruzione in acciaio, n. 03+04/11 steel doc, p.p. 8 – 18.

A.44 Landolfo R. Steel & Earthquake: Research and Standards (Steel Construction Design and Research, ISSN 1867-0520, Vol. 4, June 2011, pp. 51-52)

___________________________________________________________________________________

B. PUBBLICAZIONI SU RIVISTE NAZIONALI

B.01 Landolfo R.

Mazzolani F. M.

Il comportamento strutturale delle leamiere grecate di terza generazione (Acciaio, n. 2, Febbraio, 1988, pp. 57-68).

B.02 Landolfo R. Mazzolani F. M

Indagine sperimentale su lamiere grecate tipo TRP 200 (Acciaio, n. 1, Gennaio, 1989, pp. 1-11).

http://www.springerlink.com/content/1673-7407/5/3/




B.03* De Martino A. Landolfo R. Mazzolani F. M.

Differenti modellazioni della legge di Ramberg-Osgood per le leghe di alluminio (Alluminio Magazine n. 5/6, 1989, pp. 21-28).

B.04 Landolfo R. Mazzolani F. M.

Sistemi misti acciaio-calcestruzzo con l’impiego di lamiere grecate di terza generazione: indagine sperimentale (Acciaio, n. 1, Gennaio, 1990, pp. 1-10).

B.05* Landolfo R. Mazzolani F. M

Sistemi misti acciaio-calcestruzzo con l’impiego di lamiere grecate di terza generazione: indagine sperimentale (1

a parte in Lamiera, n. 11, 1991, pp. 92-96, 2

a parte in

Lamiera, n. 2, 1992, pp. 104-111).

B.06 Landolfo R. Mazzolani F. M.

Modelli teorici e numerici per la valutazione del comportamento flessionale della sezione mista calcestruzzo-TRP 200 (L’Edilizia n. 9, Settembre, 1991, pp. 549-557).

B.07 Ghersi A. Landolfo R.

Aspetti innovativi dell’EC3 nella verifica delle sezioni in parete sottile (Costruzioni Metalliche, n. 5, 1992, pp. 288-302).

B.08 Landolfo R. Mazzolani F. M

Comportamento flessionale di lamiere grecate in acciaio: analisi sperimentale (Costruzioni Metalliche, n. 1, 1995, pp. 29-41).

B.09 Ghersi A. Landolfo R.

Thin-walled sections in round-house type material: a simulation model (Costruzioni Metalliche n.6, 1996, pp.17-27).

B.10 Calderoni B. De Martino A. Landolfo R.

Il comportamento sismico di telai in profili sottili:limiti di servizio e definizione del fattore di struttura (Costruzioni Metalliche , n.2, 1999, pp.49-55).

B.11 De Matteis G. Landolfo R. Mazzolani F.M.

L'effetto collaborante dei pannelli di chiusura negli edifici a struttura di acciaio soggetti ad azioni sismiche (Costruzioni Metalliche , n.4, 1999, pp.63-74).

B.12 Landolfo R. La Veglia M.

Grattacielo in fiamme a Napoli: quando il rischio viene gestito male (Antincendio, n.10, 2000, pp.79-88).

B.13 Landolfo R. Di Lorenzo G. Fiorino L.

Attualità e prospettive dei sistemi costruttivi cold-formed (Costruzioni Metalliche, n.1, 2002, pp.33-50).

B.14 Portioli F. Foraboschi P. Landolfo R.

Comportamento strutturale di volte a padiglione con e senza rinforzi in FRP (Costruire in laterizio, n.95, settembre/ottobre 2003, pp.68-73).

B.15 Landolfo R.

L'evoluzione della normativa sismica (Costruzioni Metalliche , n.1, 2005, pp.54-66).

B.16 De Matteis G. Landolfo R. Ghersi A.

Il contributo strutturale dei pannelli di completamento sulla risposta sismica dei telai di acciaio (Ingegneria Sismica, n.1, 2005, pp.14-25).

B.17 Della Corte G. Fiorino L. Landolfo R.

Comportamento sismico di edifici residenziali in acciaio con pareti a taglio con pareti a taglio in profili formati a freddo e pannelli di rivestimento (Costruzioni Metalliche , n.6, 2005, pp.47-62).

B.18 Fiorino L. Della Corte G. Landolfo R.

Ancoraggi a trazione e a taglio per edifici residenziali in acciaio con pareti a taglio in profili formati a freddo e pannelli di rivestimento (Progetti&Tecnologie, n.7, Maggio 2006, pp.16-19).


B.19 Mazzolani F.M. Landolfo R. Faggiano B. Esposto M.

A Submerged Floating Tunnel (Archimedes Bridge) prototype in the Qiandao Lake (PR of China): research development and basic design (Costruzioni Metalliche , n.6, 2007, pp.45-63).

B.20 Landolfo R.

Molto bravo a neutralizzare il sisma (Il Giornale dell’Architettura, n.58, 2008, Rapporto Metalli, p.8).

B.21 Landolfo R.

Acciaio e Ricerca (Costruzioni Metalliche , n.1, 2008, pp.57-73).

B.22 Iuorio O. Fiorino L. Landolfo R.

Leggere e sismo-resistenti (Modulo, n. 356, 2009, pp.1063-1066)

B.23 Landolfo R. Acciaio e Sisma (Costruzioni Mettaliche, n. 6, 2009, pp. 53-69)

B.24 Landolfo R. Competitivo e affidabile (Arketipo, Anno 5, n. 45, 2010, pp. 108-109)

B.25 Landolfo R. Cascini L. D’Aniello M. Portioli F.

Gli effetti del degrado da fatica e corrosione sui ponti ferroviari in carpenteria metallica: un approccio integrato per la valutazione della vita residua (Costruzioni Mettaliche, n. 6, 2010, pp. 37-46)

B.26 Landolfo R. Ferracuti B.

Le strutture metalliche: sostenibilità ed efficienza (Il Giornale dell’Ingegnere, n. 16, Ottobre, 2010, pp. 7)

B.27 Landolfo R. Progettare con l’acciaio in zona sismica in accordo alle NTC (Il Giornale dell’Ingegnere, n. 16, Ottobre, 2010, pp. 10-11)

B.28 Landolfo R. Cascini L., D’Aniello M., Portioli F.

Gli effetti del degrado da fatica e corrosione sui ponti ferroviari in carpenteria metallica: un approccio integrato per la valutazione della vulnerabilità (Rivista italiana della saldatura, n. 3, Maggio-Giugno, 2011, pp. 367-377)

B.29 Landolfo R., Fiorino L., Iuorio O.

Progetto, realizzazione e collaudo della nuova scuola Bfs in Lago Patria, Napoli (Costruzioni Mettaliche, n. 6, Novembre-Dicembre, 2011, pp. 51-63)

___________________________________________________________________________________

C. ATTI DI CONGRESSI E WORKSHOP INTERNAZIONALI

C.01 Landolfo R.

Mazzolani F. M. The consequence of the design criteria on the seismic behaviour of steel frames (9th European Conference on Earthquake Engineering, Moskow, September, 1990, Vol. 2, pp. 11-19).

C.02* Landolfo R. Mazzolani F. M.

The influence of the variation through the thickness of residual stresses in tubular columns (International Colloquium on “Stability of Steel Structures”, Budapest, April, 1990, Vol. 3, pp. 109-114).

C.03 Landolfo R. Mazzolani F. M.

Behaviour of 3rd generation trapezoidal steel sheetings (Testing of Metals for Structures, RILEM Proceedings 12, E & FN Spon, London, 1990, pp. 444-452).

C.04 De Martino A. Ghersi A. Landolfo R. Mazzolani F. M.

Bending behaviour of long-span steel sheeting: test and simulation (International Conference on Steel and Aluminium Structures, Singapore, May, 1991, Elsevier Applied Science, London, 1991, pp. 429-438).


C.05 Calderoni B. Landolfo R. Lenza P. Mazzolani F. M.

Comparative analysis of seismic elastoplastic behaviour of reinforced concrete and steel frames (10th World Conference on Earthquake Engineering, Madrid, July, 1992, A. A. Balkema, Rotterdam, 1992, Vol. 7, pp. 4025-4030).

C.06 De Martino A. Ghersi A. Landolfo R. Mazzolani F. M.

Calibration of a bending model for cold-formed sections (11th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, October, 1992, pp. 503-511).

C.07 De Martino A. Landolfo R. Mazzolani F. M.

Cold-formed steel sections: the state of the art in Italy (First World Conference on Constructional Steel Design, Acapulco, November, 1992, Elsevier Applied Science, London, 1992, pp. 178-181).

C.08* Ghersi A. Landolfo R. Mazzolani F. M.

Buckling modes of double-channel cold-formed beams (First International Conference on Coupled Instabilities in Metal Structures, Timisoara, October, 1992).

C.09 Landolfo R. Mazzolani F. M. Ventrella E.

Qualification analysis of a new structural system (IV International Conference on Space Structures, University of Surrey, September, 1993, Thomas Telford Service, London, 1993, Vol. 1, pp. 693-702).


Shear behaviour of steel corrugated panels (I International Whorkshop and Seminar on Behaviour of Steel Structures in Seismic Areas, Timisoara, June, 1994, E & FN Spon, London, 1995, pp. 421-430).

C.11 Calderoni B. De Martino A. Ghersi A. Landolfo R.

On the seismic resistance of light gauge steel frames (I International Whorkshop and Seminar on Behaviour of Steel Structures in Seismic Areas, Timisoara, June, 1994, E & FN Spon, London, 1995, pp. 333-343).


Ultimate behaviour of trapezoidal steel sheets in bending (12th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, October, 1994, pp. 205-215).

C.13 Mazzolani F. M. De Matteis G. Landolfo R.

Shear tests on sandwich panel connections (Second state of the art whorkshop COST C1, Prague, October, 1994, European Commission, Brussels, pp. 481-491).

C.14* Landolfo R. Mazzolani F. M.

Different approaches in the design of slender alluminium alloy sections (International Conference on Steel and Aluminium Structures, Istanbul, May, 1995, pp. 137-146).


The influence of connecting system on the shear flexibility of corrugated steel panels (IX International Conference on Metal Structures, Krakow, June, 1995, pp. 97-106).


The characterisation of equivalent orthotropic plate for corrugated shear panels (International Colloquium on “Stability of Steel Structures”, European Session, Budapest, September, 1995, Vol. 2, pp. 153-160).


Finite element analysis of shear steel panels (4th Cost - C1 Seismic Working Group Meeting , Anacapri, ottobre 1995, Published on “Earthquake Performance of Civil Engineering Structures” ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.45-56).


C.18 Mazzolani F. M. Del Ponte R. De Matteis G. Landolfo R.

Experimental analysis on sandwich panel-to steel frame connecting systems (4th Cost - C1 Seismic Working Group Meeting , Anacapri, ottobre 1995, Published on “Earthquake Performance of Civil Engineering Structures” ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.65-74).

C.19 Mazzolani F. M. Del Ponte R. De Matteis G. Landolfo R.

Monotonic and cyclic tests on sandwich panels in shear (4th Cost - C1 Seismic Working Group Meeting , Anacapri, ottobre 1995, Published on “Earthquake Performance of Civil Engineering Structures” ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.75-88).

C.20 De Matteis G. Landolfo R. Mazzolani F. M.

Wrinkling analysis of lightweight sandwich panels (4th Cost - C1 Seismic Working Group Meeting , Anacapri, ottobre 1995, Published on “Earthquake Performance of Civil Engineering Structures” ELSA, Joint Research Centre, European Commission, Special Publication, No.1.96.56, 1996, pp.57-64).

C.21 Dubina D. Goina D. Landolfo R. Mazzolani F. M. Ungureanu V.

Coupled instability of thin-walled cold-formed beams (II International Conference on Coupled Instabilities in Metal Structures, Liege, September, 1996, pp.263-272).


The stiffening effect of cladding panels on steel building: the ECSC research project in progress (International Workshop on Thin-Walled Structures, Kreisau, September, 1996, pp. 25-34).


Analytical models for cladding panels under monotonic and cyclic loads (5th International Colloquium on Structural Stability S.S.R.C., Brazilian Session, Rio de Janeiro, August, 1996, pp.163-174).


Monotonic behaviour of fastening systems for sandwich panels (IABSE International Conference on Composite Construction – Conventional and Innovative, Innsbruck, Austria, September 16-18, 1997, pp.848-849).


Influence of welding on stability of aluminium thin plates (5th International Colloquium on Stabilty and ductility of steel Structures SDSS ’97, Nagoya, JAPAN, July 29-31, 1997, pp.149-156).


Hysteretic behaviour of fastening in sheeting (Proceedings of STESSA’97 - Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp.622-631).


Dynamic behaviour of sandwich diaphragms in simple pin-jointed steel frames, (Proceedings of STESSA’97 – Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp.434-443).

C.28 Calderoni B. De Martino A. Ghersi A. Landolfo R.

Influence of local buckling on the global seismic performance of light gauge portal frames (Proceedings of STESSA’97 - Behaviour of Steel Structures in Seismic Areas, Kyoto, Japan, 3-8 August, 1997, pp.29-40).


Experimental shear response of a single sandwich panel (Proceedings of Experimental Model Research and Testing of Thin-Walled Structures, Prague, Czech Republic, 22-24 September, 1997, pp.199-208).



Diaphragm effect for industrial steel buildings under earthquake loading (Proceedings of II World Conference on Constructional Steel Design, San Sebastian, May 1998 in Journal of Constructional Steel Research, Elsevier, 1998, 46:1-3, Paper No. 401).


Dynamic response of infilled multistorey steel frames (Proceedings of XI European Conference on Earthquake Engineering, Paris, 6-11 September, 1998).


Cyclic models for shear diaphragms with different connecting systems (Proceedings of COST C1 International Conference, Liège, 17-19 September 1998, pp.415-424).

C.33 De Matteis G. Moen L.A. Hopperstad O.S. Landolfo R. Langseth M. Mazzolani F.M.

A parametric study on the rotational capacity of aluminium beams using non-linear FEM (Proc. of International Conference on Steel and Aluminium Structures, Espoo (Finland) June 20th–23th, 1999, pp. 637-646).

C.34 Landolfo R. Piluso V. Hopperstad O.S Langseth M.

EC9 provisions for flat internal elements: comparison with experimental results (Proc. of International Conference on Steel and Aluminium Structures, Espoo (Finland) June 20th–23th, 1999, pp.515-522).

C.35* De Matteis G. Landolfo R. Milev J.

q-factor evaluation of moment resisting steel frames with semi-rigid connections by applying different approaches (Proc. of 2nd European Conference on Steel Structures (Eurosteel ’99), Prague, May, 26th–29th, Paper 221, 1999).

C.36 De Matteis G. Landolfo R.

Cladding Panel Action in Drift Control of Seismic Resistant Steel Frames (Proc. of 2nd European Conference on Steel Structures (Eurosteel ’99), Prague, May, 26th–29th, Paper 163, 1999).

C.37 Calado L. De Matteis G. Landolfo R. Mazzolani F.M.

Cyclic behaviour of steel beam-to-column connections: interpretation of experimental results (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS’99), Timisoara (Romania), September, 9th–11th, 1999, pp.211-220).

C.38 De Matteis G. Landolfo R. Mazzolani F.M. Fulop L. Dubina D.

Seismic response of MR steel frames with different connection behaviours (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS’99), Timisoara (Romania), September, 9th–11th, 1999, pp.409-420)

C.39 Landolfo R. Mazzolani F.M. Piluso V.

Local buckling of aluminium channels: tests and simulation (Proc. of 6th International Colloquium on Stability and Ductility of Steel Structures (SDSS’99), Timisoara (Romania), September, 9th–11th, 1999, pp.525-532).

C.40 Della Corte G. De Matteis G. Landolfo R.

Influence of different hysteretic behaviours on seismic response of SDoF systems (Proc. of 12th World Conference on Earthquake Engineering, 12WCEE, Auckland, New Zealand, 30 January- 4 February 2000).

C.41 Calado L. Landolfo R. De Matteis G.

Fracture resistance design of bolted joints (Proc. of 2nd Conference Construcao Metàlica e Mista, Coimbra, (Portugal, November, 18th–19th, 1999, pp.577-588).


C.42 Dubina D. Stratan A. De Matteis G. Landolfo R.

Seismic Performance of Dual Steel Moment-Resisting Frames. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.569-577.).

C.43 De Matteis G. Landolfo R. Calado L.

Cyclic Behaviour of Semi-Rigid Angle Connections: a Comparative Study of Tests and Modelling. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.165-174).

C.44 Landolfo R. Della Corte G. De Matteis G.

The effect of connection hysteretic behaviour on seismic damage to moment resisting steel frames. (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.601-610).

C.45 Faggiano B. De Matteis G. Landolfo R.

Comparative Study on Seismic Design Procedures for Steel MR Frames according to the Force-Based Approach (Proc. of Third International Conference "Behaviour of Steel Structures in Seismic Areas", Montreal (Canada), 21-24 August, 2000, Balkema pp.577-584).

C.46 De Matteis G. Landolfo R. Mazzolani F.M.

Inelastic Behaviour of Hollow Rectangular Shaped Aluminium Beams (Proc. of the 5th International Conference on “Computational Structures Technology”, CST 2000, Leuven (Belgium), 6-8 September, 2000, pp.373-379).

C.47 Landolfo R.

Coupled Instabilities in Non Linear Materials (Proc. of III International Conference on Coupled Instabilities in Metal Structures, General Report, Lisbon, September, 2000, pp.263-272).

C.48 Della Corte G. De Matteis G. Landolfo R. Mazzolani F.M.

Seismic analysis of MR steel frames based on refined hysteretic models of connections (Proc. of the International Conference on Structural Engineering – SEMC 2001, Cape Town, April, 2001, pp.955-964).


Contributing effects of cladding panels in the seismic design of MR steel frames (Proc. of the International Conference on Structural Engineering – SEMC 2001, Cape Town, April, 2001, pp. 937-946 ).

C.50 Faggiano B. De Matteis G. Landolfo R. Mazzolani F.M.

A survey on ductile design of mr steel frames (Proc. of the International Conference on Structural Engineering – SEMC 2001, Cape Town, April, 2001, pp.965-974 ).

C.51 De Matteis G. De Rosa V. Landolfo R.

Rotational capacity of I-shaped aluminium beams: a numerical study (Proc. of III Int. Conf. On Thin-Walled Structures, Cracow, Poland, 5-7 June 2001, pp.747-756)

C.52 Della Corte G. Landolfo R.

Post-earthquake fire resistance of steel structures (Proc. of the European Conference on Safety and Reliability, ESREL 2001, Torino, September, 2001, pp. 1739-1746 ).


Experimental analysis of aluminium T-Stubs: framing of the research activity

(Proc. of INALCO, Monaco, March 2001, pp.6-3-16-3-14).


C.54 Faggiano B. Landolfo R. Mazzolani F.M.

Design and modelling aspects concerning the submerged floating tunnels: an application to the Messina Strait crossing (Proc. of IV Symposium on Strait Crossings, Bergen, Norway, September 2001, pp.511-519)

C.55 Della Corte G. Landolfo R.

Global stability of MR steel frames under seismic actions (Proc. of 12th European Conference on Earthquake Engineering, London, September, 2002, Elsevier Science Ltd,. CD-ROM: paper n.307 ).

C.56 Faggiano B. Landolfo R.

Seismic analysis and design of steel MR frames with “dog-bone” connections Proc. of 12th European Conference on Earthquake Engineering, London, September, 2002, Elsevier Science Ltd,. CD-ROM: paper n.309).

C.57 Di Lorenzo G. Landolfo R.

Study of innovative built-up cold-formed beams (Proc. of 16th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2002, pp.161-172).

C.58 De Matteis G. Landolfo R.

Practical application of dissipative shear walls in seismic design of steel frames: a comparative study (Proc. of International Colloquium on Stability and Ductility of Steel Structures, SDSS 2002, Budapest, September, 2002, pp.657-667).

C.59 Di Lorenzo G. Landolfo R.

Comparative study of new connecting systems for cold-formed structures (Proc. of International Conference on Steel Structures, Eurosteel 2002, Coimbra, September, 2002, pp.657-668).

C.60 Faggiano B. De Matteis G. Landolfo R.

On the efficacy of design methods for steel moment resisting frames according to Eurocode (Proc. of International Conference on Steel Structures, Eurosteel 2002, Coimbra, September, 2002, pp.1247-1258).

C.61 De Matteis G. Landolfo R. Manganiello M. Mazzolani F.M.

Inelastic behaviour of I-shaped aluminium beams (Proc. of Sixth International Conference on Computational Structures Technology, CST 2002 , Prague, September, 2002, CD-ROM).

C.62 De Matteis G. Landolfo R. Manganiello M.

A new classification criterion for aluminium cross-sections (Proc. of International Conference on Advances in Structures, Steel, Concrete, Composite and Aluminium, ASSCCA'03, Sydney, Australia, June, 2003, pp.433-441).

C.63 Della Corte G. De Martino A. Fiorino L. Landolfo R.

Numerical modelling of thin-walled cold-formed steel C-sections in bending (Proc. Of International Conference on Advances in Structures, Steel, Concrete, Composite and Aluminium, ASSCCA'03, Sydney, Australia, June, 2003, pp.379-385).

C.64 Della Corte G. Fiorino L. Di Lorenzo G. Landolfo R.

Seismic performance of steel stud shear walls: planning of testing program (Proc. of 4th International Conference "Behaviour of Steel Structures in Seismic Areas",STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.153-159)

C.65 Della Corte G. Landolfo R. Mammana O.

Fire resistance of MR steel frames damaged by earthquakes (Proc. of 4th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.73-79)


C.66 Mazzolani F.M. Calderoni B. Della Corte G. De Matteis G. Faggiano B. Landolfo R. Panico S.

Full-scale testing of different seismic upgrading techniques on an existing RC building (Proc. of 4th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.719-726)

C.67 Faggiano B. de la Grennelais E. Landolfo R.

Design criteria for RBS in MR frame retrofitting (Proc. of 4th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2003, Naples (Italy), 9-12 June, 2003, Balkema, pp.683-690)

C.68 Manganiello M. De Matteis G. Landolfo R. Mazzolani F.M.

Numerical evaluation of required ductility and load bearing capacity for aluminium alloy continuos beams (Proc. of Ninth International Conference on Civil and Structural Engineerig, CC03, Egmond aan Zee, The Netherlands, September, 2003, paper n.31).

C.69 Portioli F. Landolfo R.

Finite element model of a brick masonry four-sided cloister vault reinforced with FRPs (Proc. of Ninth International Conference on Civil and Structural Engineerig, CC03, Egmond aan Zee, The Netherlands, September, 2003, paper n.100.).

C.70 Landolfo R. Mazzolani F.M. Fiorino L.

Cold-formed steel structures: advances in research and design (Proc. of International Colloquium on Recent Advances and New Trends in Strucutral Design, Timisoara, May, 2004, pp.59-70).


Effects of high temperatures on the resistance of aluminium alloy structures (Proc. of International Conference on Modern Building Materials Structures and Techniques , Vilnius, May 2004, pp.405-412).

C.72 Di Lorenzo G. Portioli F. Landolfo R.

On the characterization of the material properties for cold-formed steel members (Proc. of IV International Conference on Thin Walled Structures, Loughborough, Uk, June, 2004, pp.251-258).


Eurocode 9 approach for cross-sectional classification of aluminium alloy members (Proc. of INALCO, Usa, June, 2004).


The influence of material modelling on the fire resistance of aluminium alloy structures (Proc. of INALCO, Usa, June, 2004).

C.75 Landolfo R. Della Corte G. Fiorino L.

Testing of sheathed cold-formed steel stud shear walls for seismic performance evaluation (Proc. of 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, 2004 Paper No. 2697).

C.76 Landolfo R. Di Lorenzo G. Portioli F.

Local Buckling phenomena in built-up cold-formed beams: experimental and numerical investigations (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp.453-466). ISBN: 978-973-638-268-0



Local to flexural-torsional buckling interaction in aluminium alloy beams. (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp.367-380). ISBN: 978-973-638-268-0

C.78 Della Corte G. Fiorino L. Landolfo R. De Martino A.

Numerical modelling of thin-walled cold-formed steel C-sections in bending. (Proc. of IV International Conference on Coupled Instabilities in Metal Structures, Rome, September, 2004, pp.153-162). ISBN: 978-973-638-268-0

C.79 Mazzolani F.M. Della Corte G. Fiorino L. Landolfo R.

Cold-formed steel housing in seismic areas. (Proc. of 32° IAHS World Congress, Trento, September, 2004, paper. n.101)

C.80 Landolfo R. Della Corte G. Fiorino L.

Seismic performance of sheated cold-formed shear walls (Proc. of 17th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2004, pp.625-638).

C.81 Landolfo R. Manganiello M. Portioli F.

Numerical analysis of the steel roofing structure of the Umberto I Gallery in Naples (Proc. of International Specialty Conference on Structural Analysis of Historical Constructions, Padova, November, 2004, pp.1039-1048).

C.82 Fiorino L. Della Corte G. Landolfo R.

Seismic response of light-gauge steel stick-built constructions: a research project. (Proc. of COST C12 Final Conference, Innsbrunck, January, 2005, pp.105-113).


On the fire resistance of aluminium alloy structures (Proc. of COST C12 Final Conference, Innsbrunck, January, 2005, pp.267-275).


Experimental and numerical tests on sheathed steel stick-built constructions. (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. A, 1.2.101-108). ISBN: 3-86130-812-6

C.85 Della Corte G. Faggiano B. Landolfo R. Mazzolani F.M.

Post-earthquake fire resistance of moment resisting steel frames (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. C, 5.1.127-135). ISBN:3-86130-812-6

C.86 Faggiano B. Landolfo R.

Dog-bone technique for the seismic improvement of steel moment resisting frames (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. C, 5.2.105-113). ISBN:3-86130-812-6

C.87 Landolfo R. Portioli F. Di Lorenzo G.

Finite element modelling procedures for innovative built-up cold-formed beams (Proc. of International Conference on Steel Structures, Eurosteel 2005, Maastricht, June, 2005, Vol. A, 1.2.77-84). ISBN:3-86130-812-6

C.88 Faggiano B. Landolfo R. Mazzolani F.M.

The SFT: an innovative solution for waterway strait crossings (Proc. of IABSE Symposium Conference “Structures and extreme events”, Lisbon, September, 2005, LIS 146).



Experimental tests on sheathing-to-stud screw connections (Proc. of XI International Conference on Metal Structures, ICMS 2006, Rzeszow, June, 2006, Taylor & Francis Group, London, pp. 220-222). ISBN: 0-415-40120-8


Shear behavior of connections between cold-formed steel profiles and wood or gypsum –based panels: an experimental investigation (Proc. 17th A&C Specialty Conference - ASCE 2006 Structures Congress, St. Louis, Missouri, May, 2006).

C.91 Formisano A. Faggiano B. Landolfo R. Mazzolani F.M.

Ductile behavioural classes of steel members for seismic design (Proc. of 5th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2006, Yokohama (Japan), August, 2006, Taylor & Francis Group, London, 2006 pp. 225-232). ISBN: 0-415-40824-5


Seismic response of steel frame/panel shear walls: modelling based on screw connection tests (Proc. of 5th International Conference "Behaviour of Steel Structures in Seismic Areas", STESSA 2006, Yokohama (Japan), August, 2006, Taylor & Francis Group, London, 2006 pp. 503-510). ISBN: 0-415-40824-5

C.93 Landolfo R. Mammana O. Di Lorenzo G. Guerrieri M.R.

Lap-shear tests on laser welded connections for built-up cold-formed steel beams (Proc. of International Conference in Metal Structures, ICMS 2006, Poiana Brasov, Romania, September 2006, Taylor & Francis Group, London, 2006, pp. 307-314 ). ISBN: 0-415-40817-2

C.94 Di Lorenzo G. PortioliF. Landolfo R.

Experimental investigation on the load bearing capacity of built-up cold-formed steel beams (Proc. of International Colloquium on Stability and Ductility of Steel Steel Structures, SDSS 2006, Lisbon, September, 2006, IST PRESS, Lisbon pp. 665-672). ISBN: 972-8469-61-6

C.95 Iuorio O. Fiorino L. Landolfo R. Mazzolani F.M.

Cold-Formed Steel Housing (Proc. of 34° IAHS World Congress “Sustainable Housing Design: Emphasizing Urban Housing", Naples, September, 2006, paper n. 46/A). ISBN: 88-6026-030-2


Lateral response of sheathed cold-formed shear walls: an analytical approach (Proc. of 18th International Specialty Conference on Cold Formed Steel Structures, Orlando, October, 2006, pp. 603-619).

C.97 Krstevska L. Taskov Lj. Gramatikov K. Landolfo R. Mammana O. Portioli F. Mazzolani F.M.

Experimental and numerical investigations on the Mustafa Pasha Mosque large scale model. (Proc. of COST Action C26 “Urban Habitat Constructions Under Catastrophic Events” Workshop, Prague, 30-31 March 2007, pp. 158-169 ). ISBN: 978-80-01-03583-2 “

C.98 Faggiano B., Esposto M., Mazzolani F.M., Landolfo R.

Fire analysis on steel poral frame damaged after earthquake according to performance based design (Proc. of COST Action C26 “Urban Habitat Constructions Under Catastrophic Events” Workshop, Prague, 30-31 March 2007, pp. 35-40 ). ISBN: 978-80-01-03583-2


C.99 Iuorio O., Landolfo R.., Fiorino L.

Seismic design of cold-formed steel housing: a case study (Proc. of COST Action C26 “Urban Habitat Constructions Under Catastrophic Events” Workshop, Prague, 30-31 March 2007, pp. 245-251 ). ISBN: 978-80-01-03583-2

C.100* Landolfo R. Mammana O. Portioli F. Di Lorenzo G. Guerrieri M.R.

Laser welded built-up cold-formed steel beams: experimental investigations (Proc. of The Professor Jim Rhodes Retiral Conference, Glasgow, 26-27 June 2007.

C.101 Di Lorenzo G. Portioli F. Landolfo R.

Bending strength of buil-up cold-formed steel members stiffened by diagonal web beads (Proc. of International Conference on Steel and Aluminium Structures, ICSAS’07, Oxford, 2007, pp. 832-839). ISBN: 978-0-9556254-0-4

C.102 Fiorino L. Iuorio O. Landolfo R.

Seismic design of cold-formed steel housing: an analytical approach based on screw connection tests (Proc. of International Conference on Steel and Aluminium Structures, ICSAS’07, Oxford, 2007, pp.228-237 ). ISBN: 978-0-9556254-0-4

C.103 Fiorino L. Landolfo R.

Nomographs for seismic design of single-storey sheathed cold-formed frame structures (Proc. of International Conference on Recent Developments in Strucutral Engineering, Mechanics and Computation, CapeTown, September 2007, Millpress, Rotterdam, pp. 370-375).

C.104 Landolfo R. Portioli F. Mammana O. Di Lorenzo G. Guerrieri M.R.

Finite element modeling of laser welded connections for built-up cold-formed steel beams (Proc. of The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, 18-21 Sept., 2007, Civil-Comp Press. Paper n. 148).

C.105 Brescia M. Mammana O. Landolfo R.

On the classification of steel members in seismic areas (Proc. of The Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, St. Julians, Malta, 18-21 Sept., 2007, Civil-Comp Press. Paper n. 202).

C.106 Landolfo R. Cascini L. Portioli F.

Durability design of metal structures based on lifetime safety factor method (Proc. of International Conference on Sustainable Construction, Material and Practices, SB07, Lisbon, 2007, pp. 522-529). ISBN: 978-1-58603-785-7

C.107 Landolfo R. Cascini L. Portioli F.

Modelling of corrosion damage for metal structures (Proc. of International First Workshop COST Action C25, Lisbon, September 2007, pp. 3.11-3.20. ). ISBN: 978-989-20-0787-8


A specific procedure for the seismic design of cold-formed steel housing (Proc. of 5th International Conference on Advances in Steel Structures, ICASS07, Singapore, December 2007, pp.298-305 ). ISBN: 978-981-05-9365-0

C.109 Landolfo R. Portioli F. Mammana O. Mazzolani F.M.

Finite element and limit analysis of the large scale model of Mustafa Pasha mosque in Skopje strengthened with FRP (Proc. of the First Asia-Pacific Conference on FRP in Structures, Hong Kong, December 2007, pp. 283-288). ISBN: 978-962-8014-14-9


C.110 Krstevska L. Tashkov Lj. Gramatikov K. Landolfo R. Mammana O. Portioli F. Mazzolani F.M.

Shaking table tests on the large scale model of Mustafa Pasha Mosque without and with FRP (Proc. of the Sixth International Conference on Structural Analysis of Historic Construction – Preserving, Safety and Significance, Bath, July 2008, Taylor & Francis Group, London, 2008, pp. 383-391). ISBN 978-0-415-46872-5

C.111 D'Aniello M. Fiorino L. Landolfo R.

Structural performance of riveted connections in historical metal structures (Proc. of the Sixth International Conference on Structural Analysis of Historic Construction – Preserving, Safety and Significance, Bath, July 2008, Taylor & Francis Group, London, 2008, pp. 431-439). ISBN 978-0-415-46872-5


Cold-formed steel housing in seismic zone: a design procedure (Proc. of 5th International Conference on Thin-Walled Structures – ICTWS 2008 - Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp.379-386). ISBN 978-1-74107-239-6

C.113 Landolfo R. Di Lorenzo G. Guerrieri M.R. Mammana O. Portioli F.

Flexural strength of innovative built-up cold-formed steel beams assembled by laser welding (Proc. of 5th International Conference on Thin-Walled Structures – ICTWS 2008 - Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp.443-450). ISBN 978-1-74107-239-6

C.114 Mazzolani F. M. Landolfo R. Mandara A.

The EC9 Approach to Thin-Walled Structures (Proc. of 5th International Conference on Thin-Walled Structures – ICTWS 2008 - Brisbane, Australia, June 2008, Queensland University of Technology, Brisbane, pp.923-930). ISBN 978-1-74107-239-6

C.115 Portioli F. Mammana O. Di lorenzo G. Landolfo R.

Numerical analysis of local buckling in built-up cold-formed steel beams assembled by laser welding (Proc. of 5th International Conference on Coupled Instabilities in Metal Structures – CIMS 2008 - Sydney, Australia, June 2008, The University of Sydney, Sydney, pp.367-374). ISBN 978-0-646-49439-5

C.116 Landolfo R. Di Lorenzo G. Portioli F. Guerrieri M.R.

Performance of built-up cold-formed steel beams assembled with mechanical and laser welded connections (Proc. of 5th European Conference on Steel and Composite Structures – Eurosteel 2008 - Graz, Austria, September 2008, ECCS, Brussels, pp.69-74). ISBN 92-0147-000-90 .

C117 D’Aniello M. Fiorino L. Portioli F. Landolfo R.

Riveted connections in historic metal strucutures: an experimental study (Proc. of 5th European Conference on Steel and Composite Structures – Eurosteel 2008 - Graz, Austria, September 2008, ECCS, Brussels, pp.699-704). ISBN 92-0147-000-90

C118 D’Aniello M. Cascini L. Portioli F. Landolfo R.

Vulnerability assessment of a historic railway bridge (Proc. of 5th European Conference on Steel and Composite Structures – Eurosteel 2008 - Graz, Austria, September 2008, ECCS, Brussels, pp.1275-1280). ISBN 92-0147-000-90


C119 Ly L., Demonceau J.F., Jaspart J.P. Landolfo R.

Experimental and numerical investigations on iron columns reinforced by FRP under axial compression (Proc. of the International Colloquium “Seismic Risk 2008 - Eearthquakes in North West Europe”, Liège, September 2008, pp.183-190)

C.120 Landolfo R. Vesikari E.

State-of-the-art report on service life design methods (Proc. of International Seminar on Sustainability of Constructions – Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp. 4.11-4.21). ISBN: 978-3-86780-094-5

C.121 Vesikari E. Landolfo R.

Durability and service life prediction methodologies (Proc. of International Seminar on Sustainability of Constructions – Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp. 4.3-4.10). ISBN: 978-3-86780-094-5

C.122 Negro P. Mola E. Cascini L. Landolfo R. Portioli F.

Life-cycle assessment of the Spear buildings (Proc. of International Seminar on Sustainability of Constructions – Integrated Approach to Life-time Structural Engineering. COST Action C25, Dresden, October 2008, pp. 4.85-4.94). ISBN: 978-3-86780-094-5

C123 Fiorino L. Iuorio O. Landolfo R.

Experimental response of connections between cold-formed steel profile and cement-based panel (Proc. of 19th International Specialty Conference on Cold Formed Steel Structures, St. Louis, October, 2008, pp. 603-619).

C124 Landolfo R. Piluso V. Brescia M. D’Aniello M. Mammana O. Tortorelli S.

Rotation capacity vs. demand of steel beams under catastrophic enents (Proc. of Urban Habitat Costructions Under Catastrophic Events, COST Action C26 Malta, 23-25 October, 2008, pp. 146-151). ISBN 9789990944402

C125 Formisano A. Florio G. Landolfo R. Mazzolani F. M.

The Vesuvius risk scenario: the seismic vulnerability of the “palazzo di città” in Torre del Greco (NA) (Proc. of Urban Habitat Costructions Under Catastrophic Events, COST Action C26 Malta, 23-25 October, 2008, pp. 495-501). ISBN 9789990944402

C126 Landolfo R. Mammana O. Portioli F. Mazzolani F.M.

Analisi numerica della prestazione sismica del modello in grande scala della moschea di Mustafa Pasha in Skopje (Proc. of the Wondermasonary)

C127 Landolfo R. Mazzolani F.M.

Design of the retrofitting system with FRP of the Mustafa Pasha Mosque in Skopje by numerical models, (Proc. of III International Conference on “Mechanics of masonry structures strengthened with composite materials - modeling, testing, design, control”, MURICO 3, Venice, Italy, 22-24 April 2009, pp. 333-340). ISBN 88-371-1771-X

C128 Annecchiarico M. Portioli F. Landolfo R.

FE simulation of masonry wall samples of Mustafà Pasha mosque by homogeneus continuum models: Analysis and calibration (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 95-100). ISBN 9780415558044


C129 D’Aniello M. Cascini L. Portioli F. Landolfo R.

An integrated approach for the vulnerability assessment of a historical metal railway bridge (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 183-188). ISBN 9780415558044

C130 Landolfo R. Mammana O. Mazzolani F.M. Portioli F.

Numerical analysis of the large scale model of Mustafà Pasha Mosque in Skopje strengthened with FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 617-622). ISBN 9780415558044

C131 Landolfo R. Portioli F. Parrilli M. D’Aniello M.

The seismic protection of Umberto I Gallery in Naples with FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 623-628). ISBN 9780415558044

C132 Ly L., Demonceau J.F., Jaspart J.P. Landolfo R.

Proposed design rules for iron columns reinforced by FRP (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 629-634). ISBN 9780415558044

C133 D’Aniello M. Fiorino L. Portioli F. Landolfo R.

Experimental analysis of riveted connections in historic metallic structures (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 1227-1232). ISBN 9780415558051

C134 Florio G. Landolfo R. Formisano A. Mazzolani F.M.

Vulnerability of a historical masonry building in the Vesuvius area (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 1483-1488). ISBN 9780415558051

C135 Krstevska L. Tashkov Lj. Gramatikov K. Mazzolani F.M. Landolfo R.

Shaking table test of Mustafà Pasha Mosque model in reduced scale (Proc. of the International Conference on Protection of Historical Buildings, PROHITEC 09, Rome, Italy, 21-24 June 2009, pp. 1633-1640). ISBN 9780415558051

C136 Martire G. Esposto M. Faggiano B. Mazzolani F.M. Landolfo R. Zollo A. Stabile T.A.

The structural response of submerged floating tunnel to multi-support seismic excitations (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, 16-20 June 2009, pp. 19-26). ISBN 9780415563260

C137 Fiorino L. Iuorio O. Landolfo R.

Seismic analysis of sheating-braced cold-formed steel structures (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, 16-20 June 2009, pp. 913-918). ISBN 9780415563260

C138 Brescia M, Landolfo R. Mammana O. Iannone F. Piluso V. Rizzano G.

Preliminary results of an experimental program of the cyclic response and rotation capacity of steeel members (Proc. of the International Conference on Behaviour of Steel Structures in Seismic Areas, STESSA 09, Philadelphia, USA, 16-20 June 2009, pp. 971-976). ISBN 9780415563260


C139 Mazzolani F.M. Gramatikov K. Landolfo R. De Matteis G. Taskov L. Krstevska L. Lazarov L. Kokalanov G. Dumova-Jovanoska E.

Numerical and Experimental Analysis of Three Strengthening Techniques applied on Three Large Scale Models in the frame of PROHITECH project (Proc. Of 13th International Symposium of Macedonian Association of Structural Engineers (MASE), Skopje, Republic of Macedonia, 14th - 17th October 2009, pp. 49-62 ) ISBN 9989978517

C140 Landolfo R.

Durability Design of Metal Structures (Proc. of International Symposium on Sustainability of Constructions – Integrated Approach to Life-time Structural Engineering. COST Action C25, Malta, 26 July – 1 August 2010, pp. 287-320) ISBN 9789993209188

C141 Plumier A. Landolfo R. Dubina D.

Demands and recommendations for assessment and mitigation of risk under exceptional earthquakes (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Report, COST Action C26, Napoli, 16-18 September 2010, pp. 403-421) ISBN 9780415606868

C142 Marmo R. D’Aniello M. Portioli F. Landolfo R.

Finite element modelling of lap shear riveted connections in fire (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 249-254) ISBN 9780415606851

C143 Annecchiarico M. Portioli F. Landolfo R.

Micro and macro-finite element modeling of brick masonry panels subject to lateral loadings (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 315-320) ISBN 9780415606851

C144 D’Aniello M. Portioli F. Landolfo R.

Modelling issues of steel braces under extreme cyclic actions (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 335-341) ISBN 9780415606851

C145 Fiorino L. Iuorio O. Macillo V. Landolfo R.

Seismic response of sheathed cold-formed steel structures under catastrophic events (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 377-382) ISBN 9780415606851

C146 Tortorelli S. D’Aniello M. Landolfo R.

Lateral capacity of steel structures designed according to EC8 under catastrophic seismic events (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 409-414) ISBN 9780415606851

C147 Portioli F. Mammana O. Landolfo R. Mazzolani F. M.

Seismic assessment of historical mosques under exceptional earthquakes: A case study in Skopje (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp.415-420) ISBN 9780415606851


C148 Krstevska L. Tashkov L. Naumovski N. Florio G. Formisano A. Fornaro A. Landolfo R.

In-situ experimental testing of four historical buildings damaged during the 2009 L’Aquila earthquake (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 427-432) ISBN 9780415606851

C149 Formisano A. Mazzolani F. M. Florio G. Landolfo R.

A quick methodology for seismic vulneradility assessment of historical masonry aggregates (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 577-582) ISBN 9780415606851

C150 Formisano A. Mazzolani F. M. Florio G. Landolfo R. De Masi G. Delli Priscoli G. Indirli M.

Seismic vulnerability analysis of historical centres: A GIS application in Torre del Greco (Proc. of International Conference on Urban Habitat Constructions Under Catastrophic events Final Conference, COST Action C26, Napoli, 16-18 September 2010, pp. 583-588) ISBN 9780415606851

C151 Di Lorenzo G. Formisano A. Landolfo R. Mazzolani F. M. Terracciano G.

On the use of cold-formed thin walled members for vertical addition of existing masonry buildings (Proc. of International Colloquium Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, 08-10 September 2010, pp. 945-952) ISBN 9788528501377

C152 Portioli F. Mammana O. Di Lorenzo G. Landolfo R.

Analysis of contact buckling in built-up cold-formed steel beams assembled by laser welding (Proc. of International Colloquium Stability and Ductility of Steel Structures, Rio de Janeiro, Brazil, 08-10 September 2010, pp. 1109-1116) ISBN 9788528501377

C153 Della Corte G. Mazzolani F. M. Landolfo R.

Displacement-based seismic design of steel braced structures (Proc. of International Symposium on Steel Structures: Culture e Sustainability, Istanbul, Turkey, 21-23 September 2010, pp. 161-170) ISBN 9789759246129

C154 Landolfo R. D’Aniello M. Portioli F.

Simulation of inelastic cyclic behaviour of steel concentric bracings (Proc. of 14Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August – 03 September 2010, CD-ROM no. 1816) ISBN 9786086518516

C155 Tashkov L. Landolfo R. De Matteis G. Naumovski N. Florio G. Formisano A. Fornaro A. Brando G.

Experimental testing of historical buildings in Abruzzo region damaged during L' Aquila earthquake 2009 (Proc. of 14Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August – 03 September 2010, CD-ROM no. 1868) ISBN 9786086518516


C156 Iuorio O. Fiorino L. Macillo V. Landolfo R.

Evaluation of the behaviour factor for sheathed cold formed steel structures based on incremental dynamic analysis (Proc. of 14Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August – 03 September 2010, CD-ROM no. 1270) ISBN 9786086518516

C157 Formisano A. Florio G. Landolfo R. Mazzolani F. M. Terracciano G.

The behaviour of masonry building aggregates under earthquake: a study case (Proc. of 14Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August – 03 September 2010, CD-ROM no. 1183) ISBN 9786086518516

C158 Martire G. Faggiano B. Mazzolani F. M. Landolfo R. Zollo A. Stabile T. A.

A study on the response of submerged floating tunnels to seismic excitation (Proc. of 14Th European Conference on Earthquake Engineering, Ohrid, Republic of Macedonia, 30 August – 03 September 2010) ISBN 9786086518516

C159 Iuorio O. Dattilo C. A. Di Lorenzo G. Landolfo R.

The use of cold formed steel systems for sustainable emergency housing: application of LCA methodology to a modular construction (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 325-332) ISBN 9789995781606

C160 Florio G. Landolfo R. Formisano A. Mazzolani F. M.

Maintenance and retrofitting measures for a monumental building in the Vesuvius area (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 519-526) ISBN 9789995781606

C161 Landolfo R. Negro P. Cascini L. Dattilo C. A. Portioli F.

Sustainability assessment of seismic retrofitting techniques via TOPSIS method: the SPEAR building case study (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 447-464) ISBN 9789995781613

C162 Vesikari E. Landolfo R.

Service life prediction methods referred to by Eurocode 0 (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 2-9) ISBN 9789995781620

C163 Landolfo R. Vesikari E.

Service life design methods for civil engineering structures (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 17-27) ISBN 9789995781620


C164 Landolfo R. Cascini L. Portioli F.

Modelling of corrosion damage for metal structures (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 51-60) ISBN 9789995781620

C165 Cascini L. Portioli F. Landolfo R.

Service life design of metal structures based on lifetime safety factor method (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 106-116) ISBN 9789995781620

C166 Ungureanu V. Dogariu A. Dubina D. Ciutina A. Landolfo R. Mazzolani F. M. Portioli F.

Maintenance, repair and rehabilitation of buildings (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 235-281) ISBN 9789995781620

C167 Portioli F. Cascini L. Landolfo R Ungureanu V.

Sustainable refurbishment, deconstruction and demolition: applications of MCDM methods (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 03 - 05 February 2011, pp. 317-326) ISBN 9789995781620

C168 Faggiano B. Landolfo R. Mazzolani F.M

Fully coupled temperature-displacement analyses of steel structures under fire (Proc. of Integrated Fire Engineering and Response - State of the art and report, Innsbruck, Czech Technical University, Czech Republic Prague, March 2011, pp. 82-83) ISBN 9788001045985

C169 Landolfo R.

Finite element modelling of lap shear riveted connections in fire (Proc. of Integrated Fire Engineering and Response - State of the art and report, Innsbruck, Czech Technical University, Czech Republic Prague, March 2011, pp. 101-102) ISBN 9788001045985

C170 De Matteis G. Faggiano B. Landolfo R. Mazzolani F.M.

Behaviour of aluminium alloy structures under fire (Proc. of Integrated Fire Engineering and Response - State of the art and report, Innsbruck, Czech Technical University, Czech Republic Prague, March 2011, pp. 110-112) ISBN 9788001045985

C171 Portioli F. D’Amico B. Di Lorenzo G. Landolfo R.

Modelling of geometric imperfections in numerical simulations of built-up cold-formed steel beams (Proc. of 6Th International Conference on Thin-Walled Structures, Timisoara, Romania, 05 - 07 September 2011, pp. 345-352) ISBN 9789291471027


Evaluation of shear and tension strength of self-drilling screws by experimental test (Proc. of 6Th International Conference on Thin-Walled Structures, Timisoara, Romania, 05 - 07 September 2011, pp. 497-504) ISBN 9789291471027



“Multi-performance” design methodology for sheated cold-formed steel structures (Proc. of 6Th International Conference on Thin-Walled Structures, Timisoara, Romania, 05 - 07 September 2011, pp. 571-578) ISBN 9789291471027


Seimic behaviour of sheathed cold-formed steel walls – Experimental characterization (Proc. of EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures, Budapest, Hungary, 31 August - 02 September 2011, pp. 177-182) ISBN 9789291471034

C175 Tortorelli S. D’Aniello M. Landolfo R.

Prediction of the flexural capacity of steel beams – Empirical formulation (Proc. of EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures, Budapest, Hungary, 31 August - 02 September 2011, pp. 963-968) ISBN 9789291471034


Lateral design of sheathed cold-formed steel walls – The effect of the aspect ratio (Proc. of EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures, Budapest, Hungary, 31 August - 02 September 2011, pp. 1029-1034) ISBN 9789291471034

C177 Tenchini A. Rebelo C. Da Silva L. Lima L., Serra M. Landolfo R. D’Aniello M.

Seimic performance of high strength steel building – Dual-frame analysis (Proc. of EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures, Budapest, Hungary, 31 August - 02 September 2011, pp. 1179-1184) ISBN 9789291471034

C178 Formisano A. Di Lorenzo G. Landolfo R. Mazzolani F. M. Terracciano G.

On the use of cold-formed for vertical additions – Comparative study and application of MCDM methods (Proc. of EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures, Budapest, Hungary, 31 August - 02 September 2011, pp. 2187-2192) ISBN 9789291471034

C179 Marmo R. D’Aniello M. Portioli F. Landolfo R.

Historic metal elements strengthened by means of CFRP (Proc. of EUROSTEEL 2011 - 6th European Conference on Steel and Composite Structures, Budapest, Hungary, 31 August - 02 September 2011, pp. 2193-2198) ISBN 9789291471034

C180 Formisano A., Florio G., Landolfo R., Mazzolani F.M.

Numerical calibration of a simplified procedure for the seismic behaviour assessment of masonry building aggregates (Proc. of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece, 6-9 September 2011)

C181 Landolfo R.

Cold-formed steel structures in seismic area: Research and Applications (Proc. of the VIII Congresso De Construção Metálica e Mista, Guimarães, Portugal, 24-25 November 2011, pp. I-3 I-22) ISBN 9789899560529


C182 Tenchini A. Rebelo C. Lima L. Da Silva L. Serra M. Landolfo R. D’Aniello M.

Análise dos Critérios de Desempenho de Pórticos com Contraventamento Centrado (Proc. of the VIII Congresso De Construção Metálica e Mista, Guimarães, Portugal, 24-25 November 2011, pp. II-277 II-286) ISBN 9789899560529

C183 Serra M. Rebelo C. Silva L.S. Tenchini A. D’Aniello M. Landolfo R.

Study on concentrically V-braced frames under cyclic loading (Proceedings of the 7th International conference on Behaviour of Steel Structures in Seismic Areas STESSA ‘12, Santiago, Chile, 9-11 January 2012, pp. 123-129) ISBN 9780415621052

C184 Iuorio O. Fiorino L. Macillo V. Landolfo R.

Seismic design and experimental tests of an Italian cold formed steel structure (Proceedings of the 7th International conference on Behaviour of Steel Structures in Seismic Areas STESSA ‘12, Santiago, Chile, 9-11 January 2012, pp. 331-336) ISBN 9780415621052

C185 Silva A.T. Rebelo C. Silva L.S. Serra M. Lima L.R.O. D’Aniello M. Landolfo R.

Seismic performance of high-strength steel moment-resisting frames (Proceedings of the 7th International conference on Behaviour of Steel Structures in Seismic Areas STESSA ‘12, Santiago, Chile, 9-11 January 2012, pp. 381-386) ISBN 9780415621052

C186 D’Aniello M. Tortorelli S. Landolfo R.

The influence of cyclic loading on flexural response of steel beams (Proceedings of the 7th International conference on Behaviour of Steel Structures in Seismic Areas STESSA ‘12, Santiago, Chile, 9-11 January 2012, pp. 615-621) ISBN 9780415621052

C187 D’Aniello M. La Manna Ambrosino G. Portioli F. Landolfo R.

Seismic behaviour of dual steel concentric braced frames (Proceedings of the 7th International conference on Behaviour of Steel Structures in Seismic Areas STESSA ‘12, Santiago, Chile, 9-11 January 2012, pp. 889-895) ISBN 9780415621052

C188 Cascini L., D’Aniello M. Portioli F. Landolfo R.

Service life assessment of steel riveted railway bridges: A case study (Proceedings of the Sixth International Conference on Bridge Maintenance, Safety and Management, IABMAS, Stresa, Lake Maggiore, Italy, 8-12 July 2012, pp. 569-570) ISBN 9780415621243

C189 Landolfo R. Sustainable design of structures: The outcomes of the COST (Proceedings of the Third International Symposium on Life-Cycle Civil Engineering, IALCCE, Vienna, Austria, 3-6 October 2012, pp. 67-68) ISBN 9780415621267

C190 Casapulla C., Portioli F., Maione A., Landolfo R.

Macro and micro-block modelling for limit analysis of masonry structures with non-associative frictional joints (Proceedings of the International Conference on Structural Analysis of Historical Constructions , SAHC 2012, Wroclaw, Poland, 15-16 October 2012, pp. 441-448) ISBN 9788371252174

http://www.ichotelsgroup.com/intercontinental/en/gb/locations/santiago







C191 Lippiello M., Portioli F., Ceraldi C., Landolfo R.

Masonry domes strengthening: A comparative structural analysis (Proceedings of the International Conference on Structural Analysis of Historical Constructions , SAHC 2012, Wroclaw, Poland, 15-16 October 2012, pp. 489-497) ISBN 9788371252174

C192 Portioli F., Cascini L., D’Aniello M., Landolfo R.

Limit analysis of confined masonry shear walls by rigid block modelling with cracking units (Proceedings of the International Conference on Structural Analysis of Historical Constructions , SAHC 2012, Wroclaw, Poland, 15-16 October 2012, pp. 534-540) ISBN 9788371252174

C193 Formisano A., Florio G., Landolfo R., Krstevska L., Tashkov L.

Experimental and numerical investigation on monumental masonry building damaged by the Abruzzo earthquake (Proceedings of the International Conference on Structural Analysis of Historical Constructions , SAHC 2012, Wroclaw, Poland, 15-16 October 2012, pp. 1520-1528) ISBN 9788371252181

C194 Portioli F., Cascini L., D'Aniello M., Landolfo R.

A Rigid Block Model with Cracking Units for Limit Analysis of Masonry Walls subject to In-Plane Loads (Proceedings of the Eleventh International Conference on Computational Structures Technology & The Eighth International Conference on Engineering Computational Technology, Dubrovnik, Croatia, 4-7 September 2012)

C195 da Silva A.T., da Silva L.S., Rebelo C., D’Aniello M., Landolfo R., Lima L.

Seismic performance of dual steel Concentrically Braced frames (Proceedings of the 15th World Conference on Earthquake Engineering, WCEE, Lisbon, Portugal, 24-28 September 2012)

C196 Della Corte G. D’ Aniello M., Landolfo R.

Overstrength of Shear Links in Eccentric Braces (Proceedings of the 15th World Conference on Earthquake Engineering, WCEE, Lisbon, Portugal, 24-28 September 2012)

C197 D’Aniello M., La Manna Ambrosino G., Portioli F., Landolfo R.

The effect of different modelling approach on seismic analysis of steel concentric braced frames (Proceedings of the 15th World Conference on Earthquake Engineering, WCEE, Lisbon, Portugal, 24-28 September 2012)

C198 Portioli F., Cascini L., Landolfo R., Foraboschi P.

Limit analysis of brick masonry shear walls with openings under later loads by rigid block modeling (Proceedings of the 15th World Conference on Earthquake Engineering, WCEE, Lisbon, Portugal, 24-28 September 2012)

___________________________________________________________________________________

D. ATTI DI CONGRESSI E WORKSHOP NAZIONALI

D.01 Landolfo R.

Mazzolani F. M. Pernetti M.

L’influenza dei criteri di dimensionamento sul comportamento sismico dei telai in acciaio (4. Convegno Nazionale “L’Ingegneria Sismica in Italia”, Milano, Ottobre, 1989, pp. 500-511).

D.02 Landolfo R. Mazzolani F. M.

Criteri di calcolo per elementi strutturali in TRP 200 (XII Congresso C.T.A., Capri, Ottobre, 1989, pp. 665-680).


D.03 Landolfo R. Mandara A. Mazzolani F. M. Piluso V.

Verifiche di stabilità di aste in alluminio compresse assialmente: la nuova proposta ISO (XII Congresso C.T.A., Capri, Ottobre, 1989, pp. 609-624).

D.04 Landolfo R. Mazzolani F. M. Mele E.

Riesame dei ponti sospesi di Montmerle e di Groslee: confronto fra acciaio e alluminio (XII Congresso C.T.A., Capri, Ottobre, 1989, pp. 647-664).

D.05 Landolfo R. Mazzolani F. M. Talarico G.

Misura delle tensioni residue nelle sezioni a cassone in acciaio (XII Congresso C.T.A., Capri, Ottobre, 1989, pp. 625-645).


Confronto fra i metodi di misura delle tensioni residue nei profili cavi di acciaio (XVIII Convegno A.I.A.S., Amalfi, Settembre, 1990, pp. 295-305).


Profili di acciaio formati a freddo: metodologie di calcolo e aspetti normativi (XX Convegno A.I.A.S, Palermo, Settembre, 1991, pp. 641-651).

D.08 Calderoni B. Ghersi A. Landolfo R. Mazzolani F. M.

Esame comparativo del comportamento non lineare di telai sismoresistenti (5. Convegno Nazionale “L’Ingegneria Sismica in Italia”, Palermo, Ottobre, 1991, pp. 285-298).

D.09* Ghersi A. Landolfo R.

Aspetti innovativi dell’EC3 nella verifica delle sezioni in parete sottile (XIII Congresso C.T.A., Abano Terme, Ottobre, 1991, pp. 117-130).


Indagine sperimentale sul sistema Vestrut (XIII Congresso C.T.A., Abano Terme, Ottobre, 1991, pp. 225-236).


Flexural tests on trapezoidal steel sheets (XIV Congresso C.T.A., Viareggio, Ottobre, 1993, pp. 377-389).


Metodologia di qualificazione per sistemi reticolari spaziali (XIV Congresso C.T.A., Viareggio, Ottobre 1993, pp. 331-343).

D.13 Landolfo R. Mazzolani F. M. Piluso V.

L’influenza dei pannelli di chiusura sul comportamento sismico dei telai in acciaio (6. Convegno Nazionale “L’Ingegneria Sismica in Italia”, Perugia, Ottobre, 1993, pp. 785-794).

D.14 Calderoni B. De Martino A. Ghersi A. Landolfo R.

Analisi del comportamento di strutture in acciaio con aste in parete sottile sotto carichi sismici (6. Convegno Nazionale “L’Ingegneria Sismica in Italia”, Perugia, Ottobre, 1993, pp. 755-764).

D.15 De Matteis G. Landolfo R.

On the buckling behaviour of sandwich panels (XV Congresso C.T.A., Riva del Garda, Ottobre, 1995, pp. 447-460).

D.16* Ghersi A. Landolfo R.

Thin-walled sections in round-house type material: a simulation model (XV Congresso C.T.A., Riva del Garda, Ottobre, 1995, pp. 433-446).

D.17 De Matteis G. Landolfo R. Mazzolani F.M.

Sulle capacità dissipative e di irrigidimento di pannelli di chiusura inseriti in telai pendolari (Proceedings of 8° Convegno Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Taormina, 21-24 settembre 1997, pp.1185-1192).

D.18 De Matteis G. Landolfo R.

Simulazione numerica di prove sperimentali a taglio su pannelli sandwich (Proceedings of XVI Congresso CTA, Ancona, 2-5 ottobre 1997, pp.269-280).


D.19 Calderoni B. De Martino A. Landolfo R.

Comportamento sismico di telai in profili sottili: influenza dei limiti di servizio e definizione di un programma sperimentale (Proceedings of XVI Congresso CTA, Ancona, 2-5 ottobre 1997, pp.132-143).

D.20 Della Corte G. De Matteis G. Landolfo R.

Modellazione di nodi trave-colonna e risposta sismica di telai di acciaio (Proceedings of 9° Convegno Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Torino, 20-23 settembre 1999).

D.21 Della Corte G. De Matteis G. Landolfo R.

A mathematical model interpreting the cyclic behaviour of steel beam-to-column joints (Proceedings of XVII Congresso CTA, Napoli, 3-5 ottobre 1999, Vol. 1, pp.115-126).

D.22 Calado L. De Matteis G. Landolfo R.

Experimental analysis on angle beam-to-column joints under reversal cyclic loading (Proceedings of XVII Congresso CTA, Napoli, 3-5 ottobre 1999, Vol. 1, pp.103-114 ).

D.23 Faggiano B. De Matteis G. Landolfo R.

Sull’efficacia dei metodi di progettazione dei telai di acciaio sismo-resistenti secondo Eurocodice (Proceedings of 10° Convegno Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Potenza-Matera, 9-13 settembre 2001).

D.24 Landolfo R. Della Corte G. De Matteis G.

L’influenza della modellazione dei collegamenti sulla risposta sismica dei telai di acciaio (Proceedings of 10° Convegno Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Potenza-Matera, 9-13 settembre 2001).

D.25 Manganiello M. De Matteis G. Landolfo R.

Sulla capacità rotazionale di travi ad I in lega di alluminio (Proceedings of XVIII Congresso CTA, Venezia, 26-28 settembre 2001, Vol.1, pp. 73-85).

D.26 Fiorino L. Landolfo R.

Il metodo “Direct Strength” per la progettazione di membrature in parete sottile formate a freddo (Proceedings of XVIII Congresso CTA, Venezia, 26-28 settembre 2001, Vol. 2, pp. 149-160).

D.27 Landolfo R. Di Lorenzo G.

Una nuova generazione di membrature leggere formate a freddo (Proceedings of XVIII Congresso CTA, Venezia, 26-28 settembre 2001, Vol.2, pp. 161-174).

D.28 De Rosa V. Landolfo R. Mazzolani F. M..

Rrobustness of core walls against deliberate aircraft impact: lessons from the WTC collapse (Proceedings of Convegno Internazionale Crolli e Affidabilità delle Strutture Civili, Napoli, 15-16 maggio 2003, pp. 61-73).

D.29 Manganiello M. Landolfo R.

Il metodo delle cerniere plastiche applicato alle strutture in lega di alluminio (Proceedings of XIX Congresso CTA, Genova, 28-30 settembre 2003, Vol.2, pp. 423-436).

D.30 de la Grennelais E. Landolfo R.

Caratteristiche dei metalli da carpenteria italiani del XIX secolo: un’analisi delle fonti (Proceedings of XIX Congresso CTA, Genova, 28-30 settembre 2003, Vol.2, pp. 29-41).

D.31 Di Lorenzo G. Portioli F: Landolfo R.

Studio numerico-sperimentale di sistemi di connessione innovativi per membrature cold-formed (Proceedings of XIX Congresso CTA, Genova, 28-30 settembre 2003, Vol.2, pp. 117-130).

D.32 Fiorino L. Della Corte G: De Martino A. Landolfo R.

Il ruolo delle imperfezioni geometriche nella calibrazione di modelli agli elementi finiti per i profili sottili inflessi con sezione a C formata a freddo (Proceedings of XIX Congresso CTA, Genova, 28-30 settembre 2003, Vol.2, pp. 131-142).


D.33 Faggiano B. De Matteis G. Landolfo R. Mazzolani F.M .

Sul comportamento al fuoco delle strutture in lega di alluminio (Proceedings of XIX Congresso CTA, Genova, 28-30 settembre 2003, Vol.1, pp. 393-406).

D.34 Portioli F. Landolfo R.

Il modello smeared-crack nelle analisi numeriche di volte a padiglione in muratura di mattoni rinforzate con FRP (Proceedings of 11° Congresso Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Genova, 25-29 gennaio 2004, CD).

D.35 Fiorino L. Della Corte G. Landolfo R.

An experimental study on the seismic bahavior of sheathed cold-formed steel stud shear walls (Proceedings of 11° Congresso Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Genova, 25-29 gennaio 2004, CD).

D.36 Mazzolani F.M. Dolce M. Landolfo R. Nicoletti M.

Seismic upgrading of RC building by means of innovative techniques: the ILVA-IDEM project (Proceedings of 11° Congresso Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Genova, 25-29 gennaio 2004, CD).

D.37 Mazzolani F.M. Della Corte G. Calderoni B. De Matteis G. Faggiano B. Panico S. Landolfo R. Dolce M. Spina D. Valente C.

The ILVA-IDEM project: full-scale pushover test on existing RC structure- Part I: experimental results (Proceedings of 11° Congresso Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Genova, 25-29 gennaio 2004, CD).

D.38 Landolfo R.

Sistemi costruttivi per l’edilizia residenziale: aspetti tecnologici e prestazionali (Proceedings of 1° Convegno Nazionale “Tecniche innovative nella progettazione di edifici con elementi sottili in acciaio”, Pisa, 27 maggio 2005, pp.37-52).

D.39 Guerrieri M.R. Di Lorenzo G. Landolfo R.

La modellazione del degrado indotto dalla corrosione atmosferica sulle strutture in ferro dell’ottocento (Proceedings of 6° Giornate Italiane sulla Corrosione e Protezione, Senigallia, 29 giugno- 1 luglio 2005, CD).

D.40 Fiorino L. Della Corte G: Landolfo R.

Prove sperimentali a taglio su collegamenti tra profili formati a freddo in acciaio e pannelli a base di legno o gesso (Proceedings of XX Congresso CTA, Ischia, 26-28 settembre 2005, pp. 467-474).

D.41 Landolfo R. Fiorino L. Iuorio O.

Housing in cold-formed: un’applicazione in zona sismica (Proceedings of XX Congresso CTA, Ischia, 26-28 settembre 2005, pp. 523-530).

D.42 Landolfo R. Mammana O. Portioli F.

Studio delle prestazioni sismiche della copertura in ferro della Galleria Umberto I in Napoli (Proceedings of XX Congresso CTA, Ischia, 26-28 settembre 2005, pp. 531-538).


Influenza della corrosione atmosferica sulle costruzioni in ferro del XIX secolo: valutazione del degrado per la Galleria Umberto I di Napoli (Proceedings of XX Congresso CTA, Ischia, 26-28 settembre 2005, pp. 507-514).

D.44 Mazzolani F.M. Avallone A. Landolfo R.

I ponti in carpenteria metallica dell’ottocento: evoluzione delle tipologie strutturali e delle tecniche costruttive (Proceedings of XX Congresso CTA, Ischia, 26-28 settembre 2005, pp. 587-594).


D.45 Mazzolani F.M. D’Aniello M. Landolfo R.

La progettazione delle strutture in acciaio con controventi concentrici in zona sismica (Proceedings of XX Congresso CTA, Ischia, 26-28 settembre 2005, pp. 595-602).

D.46 Portioli F. Landolfo R. Di Lorenzo G.

Studio numerico-sperimentale sulla capacità portante di innovative travi di acciaio piegate a freddo (Proceedings of XX Congresso CTA, Ischia, 26-28 settembre 2005, pp. 701-708).


Comportamento sperimentale di unioni a taglio realizzate mediante spot welds (Proceedings of Convegno Nazionale su “Sperimentazione su materiali e strutture”, Venezia, 6-7 dicembre 2006, pp. 347-356).

D.48 Brescia M. Mammana O. Landolfo R.

Classificazione delle membrature in acciaio: ricalibrazione e generalizzazione del fattore di sovraresistenza s (Proceedings of Convegno Nazionale su “Materiali ed approcci innovativi per il progetto in zona sismica e la mitigazione della vulnerabilità delle strutture”, Salerno, 12-13 febbraio 2007, pp.515-522). ISBN: 978-88-7699-065-6 ediz. Stampata Polimetrica - International Scientific Publisher

D.49 Landolfo R. Brescia M. Mammana O.

Capacità rotazionale e criteri di classificazione delle membrature di acciaio in zona sismica (Proceedings of 12° Congresso Nazionale ANIDIS “L’ingegneria Sismica in Italia”, Pisa, 10-14 giugno 2007, CD, paper n. 318).

D.50 Cascini L. Portioli F. Landolfo R.

La corrosione atmosferica nel progetto di curabilità delle strutture metalliche (Proceedings of XXI Congresso CTA, Catania, 1-3 ottobre 2007, pp. 49-56). ISBN: 978-88-7758-787-9

D.51 D’Aniello M. Fiorino L. Landolfo R.

Le connessioni chiodate nelle strutture storiche in carpenteria metallica: analisi e sperimentazione (Proceedings of XXI Congresso CTA, Catania, 1-3 ottobre 2007, pp. 301-308). ISBN: 978-88-7758-787-9

D.52 Guerrieri M.R. Di Lorenzo G. Portioli F. Landolfo R.

Comportamento strutturale di travi in acciaio formate a freddo assemblate mediante saldatura laser (Proceedings of XXI Congresso CTA, Catania, 1-3 ottobre 2007, pp. 433-440). ISBN: 978-88-7758-787-9

D.53 Fiorino L. Iuorio O. Landolfo R.

Metodologie di progetto per edifici in zona sismica con struttura in profili di acciaio formati a freddo (Proceedings of XXI Congresso CTA, Catania, 1-3 ottobre 2007, pp. 461-468). ISBN: 978-88-7758-787-9

D.54 Mazzolani F.M. Faggiano B. Esposto M. Landolfo R.

L’analisi idrodinamica del del prototipo di SFT nel Lago delle mille isole (Cina) (Proceedings of XXI Congresso CTA, Catania, 1-3 ottobre 2007, pp. 777-786). ISBN: 978-88-7758-787-9

D.55 Brescia M. Landolfo R. Mammana O. Iannone F. Piluso V. Rizzano G.

Analisi sperimentale del comportamento ultimo di membrature in acciaio soggette a flessione (Proceedings of XIII Convegno ANIDIS, Bologna, 28 giugno-2 luglio 2009, p. 49). ISBN: 978-88-904292-0-0


D.56 Formisano A. Mazzolani F.M. Florio G. Landolfo R.

Vulnerabilità sismica di un aggregato in muratura in Sessa Aurunca (Proceedings of XIII Convegno ANIDIS, Bologna, 28 giugno-2 luglio 2009, p. 301). ISBN: 978-88-904292-0-0

D.57 Landolfo R. Portioli F. Mammana O. Mazzolani F.M.

Seismic vulnerability and strengthening of Mustafà Pasha Mosque in Skopje: Numerical analysis (Proceedings of XIII Convegno ANIDIS, Bologna, 28 giugno-2 luglio 2009, p. 408). ISBN: 978-88-904292-0-0

D.58 Cascini L. D’Aniello M. Portioli F. Landolfo R.

Un approccio integrato per la valutazione della vulnerabilità di un ponte ferroviario in carpenteria metallica di interesse storico (Proceedings of XXII Convegno C.T.A. “L’acciaio per un futuro sostenibile”, Padova, 28-29-30 settembre 2009, p. 175-184).

D.59 D’Aniello M. Fiorino L. Landolfo R. Portioli F.

Analisi sperimentale di collegamenti per sovrapposizione in composizione chiodata tipici delle strutture metalliche storiche (Proceedings of XXII Convegno C.T.A. “L’acciaio per un futuro sostenibile”, Padova, 28-29-30 settembre 2009, p. 293-302).

D.60 Dattilo C.A. Iuorio O. Landolfo R. Di Lorenzo G.

Life cycle assessment (LCA) di un modulo abitativo per l’emergenza realizzato in acciaio cold-formed (Proceedings of XXII Convegno C.T.A. “L’acciaio per un futuro sostenibile”, Padova, 28-29-30 settembre 2009, p. 333-342).

D.61 Fiorino L. Iuorio O. Landolfo R.

Analisi sismica di strutture in profili di acciaio formato a freddo e pannelli controventati (Proceedings of XXII Convegno C.T.A. “L’acciaio per un futuro sostenibile”, Padova, 28-29-30 settembre 2009, p. 505-514).

D.62 Landolfo R. Di Lorenzo G.

La copertura in acciaio delle nuove segreterie della Facoltà di Architettura di Pescara (Proceedings of XXII Convegno C.T.A. “L’acciaio per un futuro sostenibile”, Padova, 28-29-30 settembre 2009, p. 603-610).

D.63 Terracciano G. Formisano A. Mazzolani F.M. Landolfo R. Di Lorenzo G.

Possibilità di imipiego dei profili sottili formati a freddo per la sopraelevazione di edifici esistenti in muratura (Proceedings of XXII Convegno C.T.A. “L’acciaio per un futuro sostenibile”, Padova, 28-29-30 settembre 2009, p. 1005-1018).

D.64 Mazzolani F.M. Landolfo R. Della Corte G.

Eurocode 8 provision for steel and steel-concrete composite structures: comments, critiques, improvement proposal and research needs (Proceedings of Workshop RELUIS – UNI "Eurocode 8 perspectives from the italian standpoint workshop" Napoli, 1-3 aprile 2009, p. 173-184) ISBN 9788889972168

D.65 Florio G. Formisano A. Di Feo P. Landolfo R. Mazzolani F. M.

Analisi di vulnerabilità sismica del centro antico di Torre del Greco (NA) (Proceedings of GIS Day 2009, Napoli, 18 novembre 2009, p. 127-146) ISBN 9788854833326

D.66 Florio G. Landolfo R. Formisano A. Mazzolani F. M.

Analisi sismo-vulcanica di un edificio strategico in area vesuviana (Proceedings of XIV

Convegno ANIDIS L’Ingegneria Sismica in Italia, Bari, 18-22 Settembre

2011)


D.67 Formisano A. Florio G. Landolfo R.

Ambient vibration tests on a monumental palace in Castelnuovo of S.Pio (AQ)

(Proceedings of XIV Convegno ANIDIS L’Ingegneria Sismica in Italia, Bari,

18-22 Settembre 2011)

D.68 D’Aniello M.,

Portioli F., Landolfo R.,

Risposta sismica di strutture duali a controventi concentrici in acciaio ad alta resistenza (Proceedings of XIV Convegno ANIDIS L’Ingegneria Sismica in Italia, Bari, 18-22 Settembre 2011)

D.69 Fiorino L.,

Macillo V., Mazzolani F. M., Landolfo R.,

Prove sperimentali su viti auto perforanti (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 45-52) ISBN 9788889972236

D.70 D’Aniello M., La Manna Ambrosino G., Portioli F., Landolfo R.

Risposta sismica di strutture a controventi concentrici progettate con acciai ad alta resistenza (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 229-236) ISBN 9788889972236

D.71 Landolfo R., Di Lorenzo G., Iuorio O., Terracciano M. T.

Prestazioni e potenzialilità strutturali del mattone MPN: il mattone d’acciaio tra passato e futuro (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 621-628) ISBN 9788889972236

D.72 Fiorino L., Macillo V., Mazzolani F. M., Landolfo R.,

Sperimentazione a supporto della progettazione di pareti in CFS rivestite con pannelli strutturali (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 657-664) ISBN 9788889972236

D.73 Tortorelli S., D’Aniello M., Landolfo R.

Formulazione empirica per il calcolo della capacità flessionale di travi di acciaio (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 725-732) ISBN 9788889972236

D.74 Terracciano G., Di Lorenzo G., Landolfo R., Della Corte G.

Progetto agli spostamenti di telai con nodi semirigidi. Studio preliminare sulla modellazione dei collegamenti (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 759-766) ISBN 9788889972236

D.75 Formisano A., Mazzolani F. M., Landolfo R.,

Adeguamento sismico di edifici multipiano in c.a. mediante pannelli a taglio di acciaio: un caso studio a Torre del Greco (NA) (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 9-16) ISBN 9788889972243

D.76 D’Aniello M., Mazzolani F. M., Landolfo R.,

Demolizione, decostruzione e riuso di strutture in acciaio (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 47-54) ISBN 9788889972243

D.77 Iuorio O., Landolfo R., Fiorino L.

La nuova scuola BSF in Lago Patria-Napoli: progetto e realizzazione (Proceedings of XIII Congresso C.T.A. Le Giornate Italiane della Costruzione in Acciaio, Ischia, 9-12 Ottobre 2011, pp. 71-80) ISBN 9788889972243


D.78 De Masi G., Delli Priscoli G., Florio G., Formisano A., Landolfo R., Mazzolano F. M.

Un GIS per il Comune di Torre del Greco (NA): analisi di danno sismico del centro antico (Proceedings of GIS Day 2010, Napoli, 17 novembre 2010, p. 209-229) ISBN 9788854844544

___________________________________________________________________________________

E. CAPITOLI DI LIBRI INTERNAZIONALI E NAZIONALI

E.1 Libri internazionali

E.01 Landolfo R.

Mazzolani F. M. Plate girder webs according to BS 8118 (in Aluminium Alloy Structures, F. M. Mazzolani, 2° edition, E & FN Spon, London, 1995, pp.520-528).

E.02 Landolfo R. Mazzolani F. M.

The background of EC9 design curves for slender sections (nel libro in honour of Prof. J. Lindner, Berlin, 1998, pp.269-277).

E.03 Landolfo R.

Eurocode 3: Worked Examples (Chapters 1-to-5, Tempus Phare Complementary Measures Project 01198 “Implementing of Structural Eurocodes in Romanian Civil Engineering Standards”, 1997, 70-107).

E.04 Mazzolani F. M. Landolfo R. De Matteis G.

Influence of welding on the stability of aluminium thin plates”. (in“Stabilty and ductility of steel Structures”, ed. T. Usami, Y. Itoh, ELSEVIER, 1998, 225-232).

E.05 De Matteis G. Landolfo R. Mazzolani F.M.

The behaviour of Connections in steel MR-frames under high-intensity earthquake loading. (in "Abnormal Loading on Structures: Experimental and Numerical Modelling",eds K.S.Virdi et al., E & FN SPON, ISBN 0-419-25960-0, 2000, pp. 59-73).

E.06 Della Corte G. De Matteis G. Landolfo R.

The influence of connection modelling on the seismic response of MR steel frames (in Moment Resistant Connections of Steel Frames in Seismic Areas: Design and Reliability, F. M. Mazzolani ed., Chapter 7.2, E & FN SPON, ISBN 0-415-23577-4, 2000, pp. 485-512).

E.07 De Matteis G. Landolfo R. Dubina D. Stratan A.

Influence of the structural typology on the seismic performance of steel framed buildings. (in Moment Resistant Connections of Steel Frames in Seismic Areas: Design and Reliability, F. M. Mazzolani ed., Chapter 7.3, E & FN SPON, 2000, ISBN 0-415-23577-4, 2000, pp.513-538).

E.08 Landolfo R.

Advances in Italian cold-formed steel structures research ( in Thin-Walled Strucutres. Recent Advances and Future Trends in Thin-Walled Structures Technology, J. Loughlan ed., Canopus Publishing Limited, Uk, 2004, ISBN 0953786897, pp.21-42).

E.09 Faggiano B. Fiorino L. Della Corte G. Calderoni B. Landolfo R.. Mazzolani F.M.

‘As-built’ data collection (in Seismic upgrading of RC buildings by advanced techniques – The ILVA-IDEM Research Project, F. M. Mazzolani ed., Polimetrica International Scientific Publisher, Monza, Italy, 2006, pp. 13-27).


E.10 Formisano A. Della Corte G. Mazzolani F.M. Landolfo R.. Barbati N. Ciancia N.

Base isolation (in Seismic upgrading of RC buildings by advanced techniques – The ILVA-IDEM Research Project, F. M. Mazzolani ed., Polimetrica International Scientific Publisher, Monza, Italy, 2006, pp. 103-178).

E.11 D’Aniello M. Della Corte G. Mazzolani F.M. Landolfo R.

Steel buckling restrained braces (in Seismic upgrading of RC buildings by advanced techniques – The ILVA-IDEM Research Project, F. M. Mazzolani ed., Polimetrica International Scientific Publisher, Monza, Italy, 2006, pp. 179-223).

E.12 Della Corte G. Barecchia E. Mazzolani F.M. Landolfo R.

Composite fiber reinforced materials (in Seismic upgrading of RC buildings by advanced techniques – The ILVA-IDEM Research Project, F. M. Mazzolani ed., Polimetrica International Scientific Publisher, Monza, Italy, 2006, pp. 225-264).

E.13 Barecchia E. D’Aniello M. Della Corte G. Mazzolani F.M. Landolfo R.

Steel eccentric braces (in Seismic upgrading of RC buildings by advanced techniques – The ILVA-IDEM Research Project, F. M. Mazzolani ed., Polimetrica International Scientific Publisher, Monza, Italy, 2006, pp. 265-323).

E.14 Landolfo R. Cascini L.

D’Aniello M.

Di Lorenzo G.

Fiorino L.

Portioli F.

Vulnerability and reversible consolidation techniques of historic metal structures (in Innovative strategies for structural protection of built heritage, PRIN 2005, ed F.M. Mazzolani, Polimetrica International Scientific Publisher, Monza, Italy, 2009, ISBN 9788876991073, pp.37-113)

E.2 Libri nazionali

E.15 Mazzolani F. M

Landolfo R. Le strutture metalliche (in Ingegneria delle Strutture, ed. E. Giangreco, Vol. 3, UTET, pp 151-233, 2002).

E.16 Landolfo R.

Le costruzioni di acciaio (in La concezione strutturale nel progetto di architettura, eds A. Benedetti, E. Siviero; Editrice Compositiri S.r.l, Bologna, 2002, pp.176-205).

E.17 Landolfo R. La Veglia M.

Grattacielo in fiamme a Napoli: quando il rischio viene gestito male (in Antologia organica di prevenzione incendi, eds G.Giomi, P.R. Pais; EPC Libri S.r.l., Roma, 2002, pp.1609-1620).

E.18 Landolfo R.

L’acciaio nell’edilizia industrializzata (in L’acciaio nell’edilizia sociale, sportiva e del tempo libero, Ed. ACS ACAI Servizi srl, Milano, pp.71-99, 2003).

E.19 Landolfo R.

Strategie di progettazione antisismica ed orientamenti normativi (in Costruire con l’acciaio in zona sismica, Ed. Promozione Acciaio, Milano, pp.34-48, 2006).

___________________________________________________________________________________


F. LIBRI

F.01 Ghersi A.

Landolfo R. Mazzolani F. M.

Design of metallic cold-formed thin-walled members (Spon Press, London, 2001).

F02 Mazzolani F.M. Landolfo R. Della Corte G. Faggiano B.

Edifici con struttura di acciaio in zona sismica (IUSS Press, Pavia, 2006).

F03 De Marco T. Landolfo R. Salvatore W.

Acciai strutturali, prodotti e sistemi di unione (Ed. Promozione Acciaio, Milano, 2007).

___________________________________________________________________________________

G. RAPPORTI DI RICERCA E DOCUMENTI NORMATIVI

G.01 Mazzolani F. M.

Landolfo R. Mandara A. Piluso V.

Remarks to the chapter 8 “Ultimate resistance” of the document N 122E (Documento prodotto nell’ambito dell’attività della Commissione ISO/TC 167/SC3, 1989).

G.02 Landolfo R. Ramasco R. Realfonzo R.

Problematiche di sviluppo di strutture offshore innovative nel Mediterraneo (Progetto Speciale C.N.R. “Criteri innovativi di progettazione e gestione di opere e sistemi marini”, Maggio, 1991).

G.03 Landolfo R. Mazzolani F. M.

Studio teorico-sperimentale sul comportamento flessionale delle lamiere grecate per coperture (Rapporto finale, Ricerca n. 70521, Centro Sviluppo Materiali, Roma, Febbraio 1993).

G.04 De Matteis G. Landolfo R. Mazzolani F. M.

Analysis of the contributing effect of building panels on steel structures resistance to seismic and aeolian phenomena (Technical Final Report, E.C.S.C.-Executive Committee F6 “Steel Structures”, Agreement n.7210-SA/421, 1996).

G.05 Landolfo R. Mazzolani F. M.

Proposal of design curves for slender aluminium alloy sections (Background document, CEN-TC 250/SC9 Committee, Berlin, May, 1996).

G.06 Mazzolani F.M: De Matteis G. Landolfo R. Mandara A. Piluso V.

System Analysis- Cross Sectional and Structural Behaviour, in "Rotational Capacity of Aluminium Beams" – Final report, Eds. M. Langseth. O.S. Hopperstad, Mazzolani F.M., Norwegian University of Science and Technology (NTNU), University of Naples Federico II, Hydro Aluminium Maritme, 1998.

G.07 Della Corte G. De Matteis G. Landolfo R.

The influence of connection modelling on the seismic response of MR steel frames, RECOS Copernicus project report, Chapter 7.2, 1999

G.08 De Matteis G. Landolfo R. Dubina D. Stratan A.

Influence of the structural typology on the seismic performance of steel framed buildings, RECOS Copernicus project report, Chapter 7.3, 1999


G.09 Mazzolani F.M. Landolfo R: Faggiano B.

Preliminar design of a submerged floating tunnel in the Jintag Strait, Protocollo Sino-Italiano di cooperazione scientifica e tecnologica per la realizzazione di un submerged floating tunnel nello stretto di Jintang in Cina (2000-2001).

___________________________________________________________________________________

H. VARIE

H.01 Landolfo R. Sul comportamento flessionale dei profili sottili formati a freddo (Tesi di Dottorato,

Biblioteche Nazionali di Roma e Firenze, Febbraio, 1992).

H.02 Ghersi A. Landolfo R. Mazzolani F. M.

Coldform (programma di calcolo per la verifica di elementi formati a freddo secondo l’EC3 - Parte 1.3, ACAI, Milano, Ottobre, 1993).

___________________________________________________________________________________

I. LIBRI EDITI


I.01 Braganca L. Koukkari H. Block R. Gervasio H. Veljkovic M. Plewako Z. Landolfo R. Ungureanu V. da Silva L.S.

Sustainibility of Constructions (Proc. of First Workshop COST Action C25, Lisbon, September 2007) ISBN: 978-989-20-0787-8

I.02 Braganca L. Koukkari H. Block R. Gervasio H. Veljkovic M. Plewako Z. Landolfo R. Ungureanu V. da Silva L.S. Haller P.

Sustainability of Constructions – Integrated Approach to Life-time Structural Engineering. (Proc. of International Seminar COST Action C25, Dresden October 2008). ISBN: 978-3-86780-094-5

I.03 Braganca L. Koukkari H. Block R. Gervasio H. Veljkovic M. Plewako Z. Landolfo R. Ungureanu V. Silva L.S.

Sustainability of Constructions – Integrated Approach to Life-time Structural Engineering. (Proc. of the Workshop COST Action C25, Timişoara, 23-24 October, 2009). ISBN: 978-973-638-428-8

I.04 Braganca L. Koukkari H. Block R. Gervasio H. Veljkovic M. Borg R.P. Landolfo R. Ungureanu V. Schaur C.

Sustainability of Constructions Towards a Better Built Environment (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 3-5 February, 2011)

I.05 Braganca L. Koukkari H. Block R. Gervasio H. Veljkovic M. Borg R.P. Landolfo R. Ungureanu V. Schaur C.

Summary Report of the Cooperative Activities Integrated Approach to Life-time Structural Engineering (Proc. of International Conference Sustainability of Constructions Towards a Better Built Environment Final Conference of the COST Action C25, Innsbruck, Austria, 3-5 February, 2011)

Napoli, 2009 (Prof. Dr. Ing. Raffaele Landolfo)

http://maps.google.it/maps?hl=it&biw=1276&bih=819&q=Timisoara&wrapid=tlif130156770489011&um=1&ie=UTF-8&hq=&hnear=Timi%C5%9Foara,+Romania&gl=it&ei=UleUTZfqGcj0sgaK5Zm4CA&sa=X&oi=geocode_result&ct=title&resnum=1&ved=0CDIQ8gEwAA

ELENCO DELLE PUBBLICAZIONI - raffaelelandolfo€¦ · A.42 Landolfo R. Construction parasimique en...

Documents

Transcript of ELENCO DELLE PUBBLICAZIONI - raffaelelandolfo€¦ · A.42 Landolfo R. Construction parasimique en...