DY BT - Dynamic
Transcript of DY BT - Dynamic
DYBTQUADRIDISTRIBUZIONEENERGIABASSA TENSIONE
LOW VOLTAGEENERGYDISTRIBUTIONSWITCHBOARDS
DYBTQUADRI DISTRIBUZIONE ENERGIABASSA TENSIONELOW VOLTAGE ENERGYDISTRIBUTION SWITCHBOARDS
1 CARATTERISTICHE GENERALI
GENERAL CHARACTERISTICS PAG 4
2 DY-POWER PAG6
3 DY-EASY PAG8
4 DY-SMALL PAG10
5 DY-MCCFIXED PAG12
6 DY-MCCWITHDRAWABLE PAG14
7 DY-AUTOMATION PAG16
INDICEINDEX
4 | DYNAMIC | DYBT | QUADRI DISTRIBUZIONE ENERGIA BASSA TENSIONE
1
SBARRE PRINCIPALINei quadri DY-POWER si possono installare sistemi di sbarre principali con portate fino a 6300A. Il sistema è completamente segregabile in funzione della forma di segregazione richiesta e le sbarre principali sono posizionate in alto, al centro o in basso e distribuiscono la potenza nelle varie sezioni che compongono il quadro.
MESSAATERRAIl quadro è provvisto di una sbarra continua di terra in rame elettrolitico, con sezione adeguata al livello di corto circuito, predisposta alle due estremità per il collegamento alla rete di terra.Ad essa sono collegati le strutture metalliche dei singoli scomparti, le parti metalliche inattive degli interruttori, i secondari a terra di TA e TV. Le parti metalliche inattive delle apparecchiature sono collegate alla sbarra di terra attraverso la struttura metallica dello scomparto, le porte con apparecchiature installate sono collegate alla struttura per mezzo di trecce flessibili di rame.
MAIN BUSBARSIn the DY-POWER switchboards it is possible to install main busbar systems with capacities up to 6300A. The system is completely segregated according to the required segregation form and the main busbars, in anodised aluminum or copper, are positioned at the top, center or bottom and distribute the power in the various sections that make up the switchboard.
GROUNDINGThe switchboard is provided with a continuous earth electrolytic copper bar, with a section suitable for the short circuit level, arranged at both ends for connection to the earth network.It is connected to the metal structures of the individual compartments, the inactive metal parts of the circuit-breakers, the secondary ground-based partitions of CT and VT. The metal parts are connected to the earth bar through the metal structure of the compartment, the doors with installed equipment are connected to the structure by means of flexible copper braids
CARATTERISTICHECOSTRUTTIVE
CONSTRUCTIVECHARACTERISTICS
CARATTERISTICHE GENERALIGENERAL CHARACTERISTICS
DYNAMIC | DYBT | LOW VOLTAGE ENERGY DISTRIBUTION SWITCHBOARDS | 5
1
FORMEDISEGREGAZIONEPer forma di segregazione s’intende il tipo di suddivisione prevista all’interno del quadro.La segregazione mediante barriere o partizioni (metalliche o materiali non metallici) può avere lo scopo di:- assicurare la protezione contro i contatti diretti
(almeno IPXXB), in caso d’accesso ad una parte del quadro posta fuori tensione, rispetto al resto del quadro rimasto in tensione;
- ridurre la probabilità d’innesco e di propagazione di un arco interno;
- impedire il passaggio di corpi solidi fra parti diverse del quadro (grado di protezione almeno IP2X).
La seguente tabella della Norma CEI EN 61439-2 evidenzia le forme tipiche di segregazione che si possono ottenere.
FORMS OF INTERNAL SEPARATIONSBy form of separation the type of subdivision provided inside the assembly is intended.Separation by means of barriers or partitions (metallic or non metallic materials) is aimed at: - ensuring protection against direct contact (at least
IPXXB), in case of access to a part of the assembly cut off from the power supply, as to the rest of the assembly still supplied;
- reducing the probability of striking and propagation of an internal arc;
- preventing the passage of solid foreign bodies between different parts of the assembly (at least degree of protection IP2X).
The following table given in IEC 61439-2 highlights the typical separation forms that can be obtained.
CARATTERISTICHECOSTRUTTIVE
CONSTRUCTIVECHARACTERISTICS
CARATTERISTICHE GENERALIGENERAL CHARACTERISTICS
SIMBOLI/SYMBOLS
Legenda / Captiona Involucro / Housingb Segregazione interna / Internal segregationc Unità funzionali, compresi i terminali per i conduttori interni associati Functional units including the terminals for the associated external conductorsd Sbarre, comprese le sbarre di distribuzione Busbars, including the distribution busbars
Forma1/Form 1(nessuna segregazione interna)(no internal segregation)
Forma2/Form 2(segregazione delle sbarredelle unità funzionali)(segregation of the busbarsfrom the functional units)
Forma2bTerminali separati dalle sbarreTerminals separatedfrom the busbars
Forma3/Form 3(separazione delle sbarre dalleunità funzionali + separazionedelle unità funzionali tra loro)(separation of the busbars from the functional units + separation of the functional units from each other)
Forma3bTerminali separati dalle sbarreTerminals separatedfrom the busbars
Forma4/Form 4(separazione delle sbarre dalleunità funzionali + separazione delle unità funzionali tra loro + separazione dei terminali tra loro)(separation of the busbars from the functional units + separation of the functional units from each other + separation of the terminals from each other)
Forma4bTerminali non nella stessa cella come unità funzionale associataTerminals not in the same compartment as the associated functional unit
Forma2a/Form 2aTerminali non separatidalle sbarreTerminals not separatedfrom the Busbars
Forma3a/Form 3aTerminali non separatidalle sbarreTerminals not separatedfrom the Busbars
Forma4a/Form 4aTerminali non separatidalle sbarreTerminals not separatedfrom the Busbars
6 | DYNAMIC | DYBT | QUADRI DISTRIBUZIONE ENERGIA BASSA TENSIONE
QUADRIPOWERCENTERPERLADISTRIBUZIONEPRIMARIAINBASSATENSIONEFINOA6300APOWER CENTER FOR LOW VOLTAGE POWER DISTRIBUTION UP TO 6300A
2 DY-POWER
DEDICATIALLADISTRIBUZIONEPRIMARIADIENERGIA.OFFRONOMOLTEPLICISOLUZIONIPER QUALSIASI TIPOLOGIA DI CABLAGGIO, ACCESSIBILITÀEFORMADISEGREGAZIONE.
Caratteristiche principali• Struttura assemblata, in lamiera, montanti spessore
20/10 mm.• Zoccolo con flange rinforzate spessore 20/10 mm
per movimentazione su rulli.• Grado di protezione da IP30 in versione a giorno
a IP55 con porta cieca o trasparente in vetro temperato.
• Possibilità di accoppiamento laterale anche con armadi di altra serie DY-MCC e Automation.
• Installazione apparecchiature di tutte le marche (ABB, Schneider, Siemens, etc.).
• Verniciatura a polveri epossidiche previa fosfatazione nella tonalità RAL 7035 B (altre tonalità RAL a richiesta).
• A richiesta armadio in acciaio INOX.• Sistema di messa a terra brevettato.• Accessori interni a completamento per soluzioni di
qualsiasi esigenza.
DEVOTED TO ENERGY DISTRIBUTION.THEY OFFER MANY SOLUTIONSTO ANY WIRING TYPOLOGY, ACCESSIBILITYAND SEGREGATION FORM.
Main characteristics• Assembled structure made of sheet with a thickness
of 20/10 mm.• Plinth with reinforced flanges with a thickness 20/10
mm for handling on rollers.• Degree of protection from IP30 (open version) to IP55
with blind door or transparent door with toughened glass.
• Possibility of side connection with other cabinets too DY-MCC and Automation.• Installation of devices of all manufacturers (ABB,
Schneider, Siemens, etc.). • Epoxy powder coating after phosphating in RAL 7035
B (other colours on request).• Stainless steel cabinet on request.• Patented and certified earth connection system.• Internal finishing accessories for all kinds of exigences.
CERTIFICAZIONI/CERTIFICATIONS
IEC 61439-1 testn°B0008006testn°B5002265
tenutaalcortocircuitoIn=6300AeIcc=150kAper1sec.• Verificatenutaalcortocircuito.• Verificaconnessionemasseapparecchiatura ecircuitodiprotezione.
ShortcircuitIn=6300AeIcc=150kAper1sec.• shortcircuitverification• verificationbetweentheequipmentmassesandtheprotectioncircuit.
IEC/TR 61641CEI 17-86
testn°B0009515testn°B5014994
Condizionid’arcodovutoaguastointerno105kAper300msec.
Internalarcfaultverification105KAfor300msec.
IEC 61439-1IEC/TR 61641
testn°B0007840testn°02472-15-0378
Verificalimitidisovratemperatura.• Verificadelleproprietàdielettriche: proveadimpulsoeafrequenzaindustriale.• Verificadistanzeinariaesuperficiali.
Overtemperaturelimitsverification.• Dielectricpropertiesverification: impulseandindustrialfrequencytest.• Clearanceandcreepagedistanceverification.
CEI EN 60529 testn°B0011835 VerificadelgradodiprotezioneIP55categoria2. DegreeofIP55protectioncategory2verification.
CEI EN 60529 testn°B0011835 Testsismicoconaccelerazione1,0g. Seismictestwithacceleration1,0g
DYNAMIC | DYBT | LOW VOLTAGE ENERGY DISTRIBUTION SWITCHBOARDS | 7
DY-POWER Larghezza (L) mm Width (W) mm
Altezza (H) mm Height (H) mm
Profondità (P) mm Depth (D) mm
ARMADIOSINGOLOCABINET
625 (24 moduli/moduli/modules)
2000 / 2200 / 2400(utile/usable space = H - 200)
500 / 625 / 800 / 1000/ 1200 / 1400 / 1550
700 (24 moduli/modules)
800 (34 moduli/modules)
1000 (46 moduli/modules)
1200 (54 moduli/modules)
1400 (62 moduli/modules)
VANO CAVICABLE HOUSING
300 2000 / 2200 / 2400(utile/usable space = H - 200)
500 / 625 / 800 / 1000/ 1200 / 1400 / 1550400
ARMADIOCON VANO CAVICABINET WITHCABLE HOUSING
625 + 300 (24 moduli/modules)
2000 / 2200 / 2400(utile/usable space = H - 200)
500 / 625 / 800 / 1000/ 1200 / 1400 / 1550
700 + 300 (24 moduli/modules)
800 + 300 (34 moduli/modules)
625 + 400 (24 moduli/modules)
700 + 400 (24 moduli/modules)
800 + 400 (34 moduli/modules)
ARMADIOBIFRONTEBACK TO BACK CABINET
A richiestaOn request
DATI ELETTRICIELECTRICAL DATA
Valori nominali di tensione Voltage ratings
Tensione nominale di isolamento (Ui)Rated insulation voltage (Ui)
1000 V
Tensione nominale di impiego (Ue)Rated operational voltage (Ue) 690 V
Tensione nominale di tenuta a impulso (Uimp) Rated impulse withstand voltage (Uimp) 8 / 12 kV
Frequenza nominale (fn) Rated frequency (fn) 50 / 60 Hz
Valori nominali di corrente Current ratings
Corrente nominale (In) Rated current (In)
Fino a 6300 AUp to 6300 A
Corrente nominale di breve durata per 1 sec. (Icw) Rated short-time withstand current for 1 sec. (Icw) 150 kA
CARATTERISTICHEMECCANICHEMECHANICALCHARACTERISTICS
Grado di protezione IPIP degree of protection
InternoInternal
Fino a IP2XUp to IP2X
EsternoExternal enclosure
Da IP30 a IP55From IP30 to IP55
Altezza pannelli (h)Covers height (h) 150 / 200 / 250 /300 / 350 /400 / 450 / 500 /600 / 700 / 800 / 900 / 1000
Grado di resistenza agli urti IKIK test (shock resistance)
IK09 porta a vetroIK09 glazed doorIK10 porta ciecaIK10 blind door
AccessibilitàAccess
Frontale / Laterale / PosterioreFrom the front / Side / Rear
EsecuzioneExecution
Forma 1 / Forma 2a / Forma 2b / Forma 3a / Forma 3b / Forma 4a / Forma 4bForm 1 / Form 2a / Form 2b / Form 3a / Form 3b / Form 4a / Form 4b
MaterialeMaterial
StrutturaStructure
Lamiera decapata spessore 15/10 - 20/10 mmPickled plate, 15/10 - 20/10 mm thick
AccessoriAccessories
Lamiera Aluzinc® spessore 15/10 - 20/10 - 25/10 mmAluzinc® sheet steel, 15/10 - 20/10 - 25/10 mm thick
VerniciaturaPowder coating
Standard RAL 7035 B grigio chiaro bucciatoRAL 7035 B light grey (orange peel)
A richiestaOn request
Colori scala RAL e acciao INOXPowder RAL colours and stainless steel
Componenti in plasticaPlastic components
Senza alogeni, ritardanti la fiamma, autoestinguenti, senza CFCHalogen-free, flame retardants, self-extinguishing, CFC-free
Trattamento barreBars treatment
Alubar
standard: Stagnostandard: tina richiesta: Nichel / Argentoon request: Nickel/ Silver
RameCopper
standard: ravvivatostandard: nonea richiesta: Stagno / Nichel / Argentoon request: Tin/ Nickel/ Silver
ARMADIOSINGOLOCABINET
ARMADIOCON VANO CAVI
CABINET WITHCABLE HOUSING
VANO CAVICABLE HOUSING
8 | DYNAMIC | DYBT | QUADRI DISTRIBUZIONE ENERGIA BASSA TENSIONE
QUADRI ELETTRICI PER IL SETTORE INDUSTRIALEETERZIARIOFINOA1600AELECTRICAL CABINET FOR INDUSTRIAL AND SERVICE SECTOR UP TO 1600 A
3 DY-EASY
VERSATILI E ROBUSTI.
OFFRONOUNASOLUZIONEDICABLAGGIORAPIDACONAMPIAGAMMADISOLUZIONI:PIASTRA DI CABLAGGIO, TELAIO INTERNO DI CABLAGGIO, CONTROPORTA E TELAIO GIREVOLE.STANDARDIZZAZIONE DEGLI ACCESSORI INTERNI CHEPERMETTERAPIDITÀEPRECISIONEDIMONTAGGIODEGLIINTERRUTTORIMODULARI.
Caratteristiche principali• Struttura assemblata, in lamiera, montanti spessore
20/10 mm.• Grado di protezione da IP30 in versione a giorno a IP55 con porta cieca o trasparente a
vetro temperato.• Possibililità di accoppiamento laterale.• Installazione apparecchiature di tutte le marche
(ABB, Schneider, Siemens, etc.).• Verniciatura a polveri epossidiche previa
fosfatazione nella tonalità RAL 7035 B (altre tonalità RAL a richiesta).
• A richiesta armadio in acciaio INOX.• Sistema di messa a terra brevettato.• Accessori interni a completamento per soluzioni di qualsiasi esigenza.• Test sismico CESI n. B3020327 con accelerazione 1,0g.
VERSATILE AND STRONG.
THEY OFFER A QUICK WIRING SOLUTION WITH A WIDE RANGE OF SOLUTIONS: WIRING PLATE, INTERNAL WIRING FRAME, INNER DOOR AND SWIVEL FRAME.ENABLES RAPIDITY AND PRECISION OF THE ASSEMBLY OF MODULAR CIRCUIT BREAKERS.
Main characteristics • Assembled structure made of sheet with a thickness
of 20/10 mm. • Degree of protection from IP30 (open version) to IP55
with blind door or transparent door with toughened glass.
• Possibility of side connection. • Installation of circuit breakers of all leading
manufacturers (ABB, Schneider, Siemens, etc.).• Epoxy powder coating after phosphating in RAL 7035
B (other colours on request).• On request, stainless steel cabinet.• Patented and certified earth connection system.• Full range of internal finishing accessories to provide
solutions for any requirement. • Seisimic test CESI n. B3020327 with acceleration 1,0g.
DYNAMIC | DYBT | LOW VOLTAGE ENERGY DISTRIBUTION SWITCHBOARDS | 9
DY-EASY Larghezza (L) mm Width (W) mm
Altezza (H) mm Height (H) mm
Profondità (P) mm Depth (D) mm
ARMADIOSINGOLOCABINET
625 (24 moduli/moduli/modules)
1800 / 2000 / 2200(utile/usable space = H - 200)
250(utile/usable space = 125)
400 / 500 / 625(utile/usable space = 218)
700 (24 moduli/modules)
800 (34 moduli/modules)
900 (36 moduli/modules)
1000 (46 moduli/modules)
VANO CAVICABLE HOUSING
300 1800 / 2000 / 2200(utile/usable space = H - 200) 250 / 400 / 500 / 625
400
ARMADIOCON VANO CAVICABINET WITHCABLE HOUSING
625 + 300 (24 moduli/modules)
1800 / 2000 / 2200(utile/usable space = H - 200)
250(utile/usable space = 125)
400 / 500 / 625(utile/usable space = 218)
700 + 300 (24 moduli/modules)
800 + 300 (34 moduli/modules)
900 + 300 (36 moduli/modules)
625 + 400 (24 moduli/modules)
700 + 400 (24 moduli/modules)
800 + 400 (34 moduli/modules)
900 + 400 (36 moduli/modules)
ARMADIOBIFRONTEBACK TO BACK CABINET
A richiestaOn request
DATI ELETTRICIELECTRICAL DATA
Valori nominali di tensione Voltage ratings
Tensione nominale di isolamento (Ui)Rated insulation voltage (Ui)
690 V
Tensione nominale di impiego (Ue)Rated operational voltage (Ue) 400 V
Tensione nominale di tenuta a impulso (Uimp) Rated impulse withstand voltage (Uimp) 6 / 8 / 12 kV
Frequenza nominale (fn) Rated frequency (fn) 50 / 60 Hz
Valori nominali di corrente Current ratings
Corrente nominale (In) Rated current (In)
Fino a 1600 AUp to 1600 A
Corrente nominale di breve durata per 1 sec. (Icw) Rated short-time withstand current for 1 sec. (Icw) 70 kA
CARATTERISTICHEMECCANICHEMECHANICALCHARACTERISTICS
Grado di protezione IPIP degree of protection
InternoInternal
Fino a IP2XUp to IP2X
EsternoExternal enclosure
Da IP30 a IP55From IP30 to IP55
Altezza pannelli (h)Covers height (h) 150 / 200 / 300 / 400 / 500 /600 / 700 / 800 / 900 / 1000
Grado di resistenza agli urti IKIK test (shock resistance)
IK09 porta a vetroIK09 glazed door
IK10 porta ciecaIK10 blind door
AccessibilitàAccess
Frontale / Laterale / PosterioreFrom the front / Side / Rear
EsecuzioneExecution
Forma 1 / Forma 2a / Forma 2b / Forma 3aForm 1 / Form 2a / Form 2b / Form 3a
MaterialeMaterial
StrutturaStructure
Lamiera decapata spessore 15/10 - 20/10 mmPickled plate, 15/10 - 20/10 mm thick
AccessoriAccessories
Lamiera Aluzinc® spessore 15/10 - 20/10 - 25/10 mmAluzinc® sheet steel, 15/10 - 20/10 - 25/10 mm thick
VerniciaturaPowder coating
Standard RAL 7035 B grigio chiaro bucciatoRAL 7035 B light grey (orange peel)
A richiestaOn request
Colori scala RAL e acciao INOXPowder RAL colours and stainless steel
Componenti in plasticaPlastic components
Senza alogeni, ritardanti la fiamma, autoestinguenti, senza CFCHalogen-free, flame retardants, self-extinguishing, CFC-free
ARMADIOSINGOLOCABINET
ARMADIOCON VANO CAVI
CABINET WITHCABLE HOUSING
VANO CAVICABLE HOUSING
10 | DYNAMIC | DYBT | QUADRI DISTRIBUZIONE ENERGIA BASSA TENSIONE
QUADRI ELETTRICI PER IL SETTORE CIVILE,TERZIARIOEINDUSTRIALEFINOA250ASMALL ELECTRICAL CABINETSFOR INDUSTRIAL, CIVIL AND SERVICE SECTOR UP TO 250 A
4 DY-SMALL
MIGLIOREACCESSIBILITÀFRONTALECONL’AUMENTODELLALARGHEZZAEFACILESMONTAGGIODELLECORNICIFISSATEINMODOINDIPENDENTE.STANDARDIZZAZIONE DEGLI ACCESSORI INTERNI CONLASERIEDY-EASYGRAZIEALSISTEMAMODULARDIN™CHEPERMETTERAPIDITÀEPRECISIONEDIMONTAGGIODEGLIINTERRUTTORIMODULARI.
Caratteristiche principali• Struttura monoblocco in lamiera saldata spessore
12/10 mm.• Grado di protezione da IP31 in versione a giorno
a IP55 con porta cieca o trasparente a vetro temperato.
• Tetto e fondo completamente asportabili.• Possibilità di accoppiamento verticale e incasso a
parete con cornice.• Installazione apparecchiature di tutte le marche
(ABB, Schneider, Siemens, etc.).• Verniciatura a polveri epossidiche previa
fosfatazione nella tonalità RAL 7035 B (altre tonalità RAL a richiesta).
• A richiesta armadietto in acciaio INOX.• Sistema di messa a terra brevettato.• Accessori interni a completamento per soluzioni di qualsiasi esigenza.• A richiesta armadietti a parete e pavimento
in materiale isolante. Contattare Dynamic per maggiori informazioni.
BETTER ACCESS FROM THE FRONT WITH THE INCREASE IN THE WIDTH AND EASY DISASSEMBLY OF THE FRAMES INDEPENDENTLY FIXED. SAME INTERNAL ACCESSORIES AVAILABLE FOR DY-EASY SERIES THANKS TO THE MODULARDIN™ SYSTEM THAT ENABLES RAPIDITY AND PRECISION OF THE ASSEMBLY OF MODULAR CIRCUIT BREAKERS.
Main characteristics• Monoblock structure made of welded sheet with a
thickness of 12/10 mm.• Degree of protection from IP31 (open version) to IP55
with blind door or transparent door with toughened glass.
• Top and bottom completely removable.• Possibility of vertical connection and frame for
recessed mounting.• Installation of circuit breakers of all leading
manufacturers (ABB, Schneider, Siemens, etc.).• Epoxy powder coating after phosphating in RAL 7035
B (other colours on request).• Patented and certified earth connection system.• Full range of internal finishing accessories to provide
solutions for any requirement. • On request, road cabinets, wall and floor lockers in
insulating material. Contact Dynamic for more information.
DYNAMIC | DYBT | LOW VOLTAGE ENERGY DISTRIBUTION SWITCHBOARDS | 11
DY-SMALL Larghezza (L) mm Width (W) mm
Altezza (H) mm Height (H) mm
Profondità (P) mm Depth (D) mm
SINGOLOSMALL CABINET
320 (11 moduli/moduli/modules)
460 / 660 / 860 / 1060 / 1260 / 1460 / 1660(utile/usable space = H - 60) 200 / 295 / 395
(utile/usable space = D - 75)
480 (16 moduli/modules)
620 (24 moduli/modules)
820 (34 moduli/modules)
ARMADIETTOCON VANO CAVISMALL CABINET WITHCABLE HOUSING
840 (24 moduli/modules) 660 / 860 / 1060 / 1260 / 1460 / 1660(utile/usable space = H - 60)
200 / 295(utile/usable space = D - 75)
ALTREDIMENSIONIOTHER DIMENSIONS
Contattare DynamicContact Dynamic
DATI ELETTRICIELECTRICAL DATA
Valori nominali di tensione Voltage ratings
Tensione nominale di isolamento (Ui)Rated insulation voltage (Ui)
690 V
Tensione nominale di impiego (Ue)Rated operational voltage (Ue) 400 V
Tensione nominale di tenuta a impulso (Uimp) Rated impulse withstand voltage (Uimp) 6 / 8 / 12 kV
Frequenza nominale (fn) Rated frequency (fn) 50 / 60 Hz
Valori nominali di corrente Current ratings
Corrente nominale (In) Rated current (In)
Fino a 250 AUp to 250 A
Corrente nominale di breve durata per 1 sec. (Icw) Rated short-time withstand current for 1 sec. (Icw) 15 kA
CARATTERISTICHEMECCANICHEMECHANICALCHARACTERISTICS
Grado di protezione IPIP degree of protection
InternoInternal
Fino a IP2XUp to IP2X
EsternoExternal enclosure
Da IP30 a IP55From IP30 to IP55
Altezza pannelli (h)Covers height (h) 150 / 200 / 300 / 400 / 500 / 600 / 700 / 800 / 900 / 1000
Grado di resistenza agli urti IKIK test (shock resistance)
IK09 porta a vetroIK09 glazed door
IK10 porta ciecaIK10 blind door
AccessibilitàAccess
FrontaleFront
EsecuzioneExecution
Forma 1Form 1
MaterialeMaterial
StrutturaStructure
Lamiera decapata spessore 12/10 mmPickled plate, 12/10 mm thick
AccessoriAccessories
Lamiera Aluzinc® spessore 15/10 mmAluzinc® sheet steel, 15/10 mm thick
VerniciaturaPowder coating
Standard RAL 7035 B grigio chiaro bucciatoRAL 7035 B light grey (orange peel)
A richiestaOn request
Colori scala RAL e acciao INOXPowder RAL colours and stainless steel
Componenti in plasticaPlastic components
Senza alogeni, ritardanti la fiamma, autoestinguenti, senza CFCHalogen-free, flame retardants, self-extinguishing, CFC-free
ARMADIETTOSINGOLOCABINET
ARMADIETTOCON VANO CAVI
CABINET WITHCABLE HOUSING
12 | DYNAMIC | DYBT | QUADRI DISTRIBUZIONE ENERGIA BASSA TENSIONE
QUADRIMOTORCONTROLCENTERACASSETTIFISSIFINOA6300Aa cassetti fissi fino a 6300 AMOTOR CONTROL CENTERWITH FIXED UNITS UP TO 6300 A
5 DY-MCCFIXED
DEDICATIALL’AVVIAMENTOEALCONTROLLOMOTORI.
OFFRONOUNASOLUZIONEDICABLAGGIORAPIDACONAMPIAGAMMADISOLUZIONI:BARRE POSTERIORI, BARRE LATERALI E BARRE POSTERIORI CON TUNNEL.
Caratteristiche principali• Struttura assemblata, in lamiera, montanti spessore
20/10 mm.• Grado di protezione da IP30 in versione a giorno a IP55 con porta cieca o trasparente a
vetro temperato.• Cubicolo completo di pannello a cerniera, piastra di
cablaggio, separatore orizzontale e segregazione laterale.
• Possibilità di accoppiamento laterale.• Installazione apparecchiature di tutte le marche
(ABB, Schneider, Siemens, etc.).• Verniciatura a polveri epossidiche previa
fosfatazione nella tonalità RAL 7035 B (altre tonalità RAL a richiesta).
• A richiesta armadio in acciaio INOX.• Sistema di messa a terra brevettato.• Zoccolo con flange rinforzate per movimentazione
su rulli.• Accessori interni a completamento per soluzioni di qualsiasi esigenza.• Test sismico CESI n. B3020295 con accelerazione 1,0g.
DESIGNED AND PRODUCED FOR STARTINGAND MOTOR CONTROL CENTER.
THEY OFFER A QUICK WIRING SOLUTION WITH MANY SOLUTIONS: REAR BUSBARS, SIDE BUSBARS AND REAR BUSBARS WITH TUNNEL.
Main characteristics• Assembled structure made of sheet with a thickness
of 20/10 mm.• Degree of protection from IP30 (open version) to IP55
with blind door or transparent door with toughened glass.
• Compartment with hinged cover, wiring plate, horizontal partition and side segregation.
• Possibility of side connection.• Installation of circuit breakers of all leading
manufacturers (ABB, Schneider, Siemens, etc.).• Epoxy powder coating after phosphating in RAL 7035
B (other colours on request).• On request, stainless steel cabinet.• Patented and certified earth connection system.• Plinth with reinforced covering flanges for a handling
on rollers.• Full range of internal finishing accessories to provide
solutions for any requirement. • Seisimic test CESI n. B3020327 with acceleration 1,0g.
DYNAMIC | DYBT | LOW VOLTAGE ENERGY DISTRIBUTION SWITCHBOARDS | 13
DY-MCC Larghezza (L) mm Width (W) mm
Altezza (H) mm Height (H) mm
Profondità (P) mm Depth (D) mm
ARMADIOSINGOLOCABINET
625
2000 / 2200 / 2400(utile/usable space = H - 400)
400 / 500 / 625 / 800 / 1000 / 1200(utile/usable space = H - 300/400)
700
800
1000
VANO CAVICABLE HOUSING
300 2000 / 2200 / 2400(utile/usable space = H - 400)
400 / 500 / 625 / 800 / 1000 / 1200(utile/usable space = H - 300/400)400
ARMADIOCON VANO CAVICABINET WITHCABLE HOUSING
625 + 300
2000 / 2200 / 2400(utile/usable space = H - 400)
400 / 500 / 625 / 800 / 1000 / 1200(utile/usable space = H - 300/400)
700 + 300
800 + 300
625 + 400
700 + 400
800 + 400
ARMADIOBIFRONTEBACK TO BACK CABINET
A richiestaOn request
DATI ELETTRICIELECTRICAL DATA
Valori nominali di tensione Voltage ratings
Tensione nominale di isolamento (Ui)Rated insulation voltage (Ui)
1000 V
Tensione nominale di impiego (Ue)Rated operational voltage (Ue) 690 V
Tensione nominale di tenuta a impulso (Uimp) Rated impulse withstand voltage (Uimp) 6 / 8 / 12 kV
Frequenza nominale (fn) Rated frequency (fn) 50 / 60 Hz
Valori nominali di corrente Current ratings
Corrente nominale (In) Rated current (In)
Fino a 6300 AUp to 6300 A
Corrente nominale di breve durata per 1 sec. (Icw) Rated short-time withstand current for 1 sec. (Icw) 70 kA
CARATTERISTICHEMECCANICHEMECHANICALCHARACTERISTICS
Grado di protezione IPIP degree of protection
InternoInternal
Fino a IP2XUp to IP2X
EsternoExternal enclosure
Da IP30 a IP55From IP30 to IP55
Altezza pannelli (h)Covers height (h) 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 600 / 700 / 800 / 900 / 1000
Grado di resistenza agli urti IKIK test (shock resistance)
IK09 porta a vetroIK09 glazed door
IK10 porta ciecaIK10 blind door
AccessibilitàAccess
Frontale / Laterale / PosterioreFrom the front / Side / Rear
EsecuzioneExecution
Forma 3b / Forma 4aForm 3b / Form 4a
MaterialeMaterial
StrutturaStructure
Lamiera decapata spessore 15/10 - 20/10 mmPickled plate, 15/10 - 20/10 mm thick
AccessoriAccessories
Lamiera Aluzinc® spessore 15/10 - 20/10 - 25/10 mmAluzinc® sheet steel, 15/10 - 20/10 - 25/10 mm thick
VerniciaturaPowder coating
Standard RAL 7035 B grigio chiaro bucciatoRAL 7035 B light grey (orange peel)
A richiestaOn request
Colori scala RAL e acciao INOXPowder RAL colours and stainless steel
Componenti in plasticaPlastic components
Senza alogeni, ritardanti la fiamma, autoestinguenti, senza CFCHalogen-free, flame retardants, self-extinguishing, CFC-free
ARMADIOSINGOLOCABINET
ARMADIOCON VANO CAVI
CABINET WITHCABLE HOUSING
VANO CAVICABLE HOUSING
14 | DYNAMIC | DYBT | QUADRI DISTRIBUZIONE ENERGIA BASSA TENSIONE
QUADRIMOTORCONTROLCENTERACASSETTIESTRAIBILIFINOA6300Aa cassetti fissi fino a 6300 AMOTOR CONTROL CENTERWITH WITHDRAWABLE UNITS UP TO 6300 A
6 DY-MCCWITHDRAWABLEUNITS
DEDICATIALL’AVVIAMENTOEALCONTROLLOMOTORI.
OFFRONOUNASOLUZIONEDICABLAGGIORAPIDACONAMPIAGAMMADISOLUZIONI:CASSETTOSINGOLO,CASSETTODOPPIOEARMADIOMISTO.
Caratteristiche principali• Struttura assemblata, in lamiera, montanti spessore 20/10 mm• Grado di protezione da IP30 in versione a giorno a IP55 con porta trasparente a vetro temperato.• Cubicolo completo di separatore orizzontale e laterale, piastra
di cablaggio posteriore con connettore femmina per ausiliari e pinze di potenza.
• Cassetto estraibile completo di pannello frontale personalizzabile, sezionatore a vuoto SwitchLAF™ 2.0, connettore maschio per ausiliari e contatti di potenza.
• Possibilità di accoppiamento laterale.• Installazione apparecchiature di tutte le marche (ABB,
Schneider, Siemens, etc.).• Verniciatura a polveri epossidiche previa fosfatazione nella
tonalità RAL 7035 B (altre tonalità RAL a richiesta).• A richiesta armadio in acciaio INOX.• Sistema di messa a terra brevettato.• Zoccolo con flange rinforzate per movimentazione su rulli.• Accessori interni a completamento per soluzioni di qualsiasi esigenza.
A PRODUCT RANGE DESIGNEDFOR MOTOR STARTING AND CONTROL.
VERSATILE DESIGN CAN ACCOMMODATE DIFFERENT SIZES OF WITHDRAWABLE UNITS PROVIDING A SOLUTION TO ALL TYPES OF APPLICATIONS.
Main characteristics• Assembled sheet metal enclosure (upright thickness: 20/10 mm).• Degree of protection from IP30 (cabinet without door) up to IP55
(cabinet equipped with transparent tempered glass door).• Compartment equipped with side and horizontal partitions, rear
wiring plate with female connector for auxiliary circuits and power pliers.
• Withdrawable unit equipped with customizable front panel, SwitchLAF™ 2.0 system, male connector for auxiliary circuits and power contacts.
• Possibility of side connection.• Installation of circuit breakers of all leading manufacturers (ABB,
Schneider, Siemens,etc.).• RAL 7035 B epoxy powder coating (other colours on request).• Enclosures available in stainless steel on request.• Patented and certified earthing system.• Reinforced plinth for a safe handling of the enclosure.• Full range of internal finishing accessories to meet any
requirement.
IEC 61439-1 testn.B0008006testn.B8020497
tenutaalcortocircuitoIn=6300AeIcc=105kAper1sec.• Verificatenutaalcortocircuito.• Verificaconnessionemasseapparecchiatura ecircuitodiprotezione.
ShortcircuitIn=6300AandIcc=105kAper1sec.• shortcircuitverification• verificationbetweentheequipmentmassesandtheprotectioncircuit.
IEC/TR 61641CEI 17-86 testn°B0009515 Condizionid’arcodovuto
aguastointerno70kAper300msec.Internalarcfaultverification70Kafor300msec.
IEC 61439-1IEC/TR 61641 testn°B0007840
Verificalimitidisovratemperatura.• Verificalimitidisovratemperatura.• Verificadelleproprietàdielettriche:prove adimpulsoeafrequenzaindustriale.• Verificadistanzeinariaesuperficiali.
Overtemperaturelimitsverification.• Verificationofovertemperaturelimits.• Verificationofdielectricproperties:industrialfrequencyandimpulsetests.• Verificationofairclearanceandcreepagedistances.
CEI EN 60529
testn.EPT16AVM033754359testn.EPT16AVM033754359testn.EPT16AVM033754359testn.CESIA902B006testn.B0011835testn.B4030377
VerificadelgradodiprotezioneIP30VerificadelgradodiprotezioneIP41VerificadelgradodiprotezioneIP42VerificadelgradodiprotezioneIP54categoria2VerificadelgradodiprotezioneIP55categoria2VerificadelgradodiprotezioneIP56categoria2
VerificationofdegreeofIP30degreeofprotectionVerificationofdegreeofIP41degreeofprotectionVerificationofdegreeofIP42degreeofprotectionVerificationofdegreeofIP54category2degreeofprotectionVerificationofdegreeofIP55category2degreeofprotectionVerificationofdegreeofIP56category2degreeofprotection
IEEEStd693-2005IEC 60068-2-57IEC 62271-300Transelec
testn.B3020295 Testsismicoconaccelerazione1,0g. Seismictestwithacceleration1,0g
DYNAMIC | DYBT | LOW VOLTAGE ENERGY DISTRIBUTION SWITCHBOARDS | 15
DY-MCC Larghezza (L) mm Width (W) mm
Altezza (H) mm Height (H) mm
Profondità (P) mm Depth (D) mm
ARMADIOSINGOLOCABINET
625 (24 moduli/moduli/modules) 2000 / 2200 / 2400(utile/usable space = H - 200)
625 / 800 / 1000 /1200 / 1400 / 1600700 (24 moduli/moduli/modules)
ARMADIOCON VANO CAVICABINET WITHCABLE HOUSING
625 + 300 (24 moduli/moduli/modules)
2000 / 2200 / 2400(utile/usable space = H - 200)
625 / 800 / 1000 /1200 / 1400 / 1600
700 + 300 (24 moduli/moduli/modules)
625 + 400 (24 moduli/moduli/modules)
700 + 400 (24 moduli/moduli/modules)
ARMADIOMULTISWITCHMULTISWITCH CABINET
1000 + 300 (44 moduli/moduli/modules)
1000 + 400 (44 moduli/moduli/modules)ARMADIOBIFRONTEBACK TO BACK CABINET
A richiestaOn request
DATI ELETTRICIELECTRICAL DATA
Valori nominali di tensione Voltage ratings
Tensione nominale di isolamento (Ui)Rated insulation voltage (Ui)
1000 V
Tensione nominale di impiego (Ue)Rated operational voltage (Ue) 690 V
Tensione nominale di tenuta a impulso (Uimp) Rated impulse withstand voltage (Uimp) 6 / 8 / 12 kV
Frequenza nominale (fn) Rated frequency (fn) 50 / 60 Hz
Valori nominali di corrente Current ratings
Corrente nominale (In) Rated current (In)
Barre principaliMain busbar system
Fino a 6300 AUp to 6300 A
Barre di distribuzioneBusbars distribution 400 / 630 / 800 A
Corrente nominale di breve durata per 1 sec. (Icw) Rated short-time withstand current for 1 sec. (Icw) 105 kA
Tenuta arco internoInternal arc resistance
Corrente presunta ammissibile in condizioni d’arco (Ip arc) Permissible current under arcing conditions (Ip arc)
70 kA
Durata d’arco associata (t arc) Permissible arc duration (t arc) 300 ms
Pinze cassetti / Withdrawable units pliers 160 / 320 A
Connettori contatti ausiliari / Auxiliary contacts connectors 10 / 16 A
Contatti ausiliari / Auxiliary contacts 6 / 16 / 24 / 42 / 48
CARATTERISTICHEMECCANICHEMECHANICALCHARACTERISTICS
Grado di protezione IPIP degree of protection
InternoInternal
Fino a IP2XUp to IP2X
EsternoExternal enclosure
Da IP30 a IP55From IP30 to IP55
Altezza cassetti (h)Withdrawable units height (h) 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 600
Grado di resistenza agli urti IKIK test (shock resistance)
IK09 porta a vetro / IK09 glazed door
IK10 porta cieca / IK10 blind doorAccessibilitàAccess
Frontale / Laterale / PosterioreFrom the front / Side / Rear
EsecuzioneExecution
Forma 3b / Forma 4aForm 3b / Form 4a
MaterialeMaterial
StrutturaStructure
Lamiera decapata spessore 15/10 - 20/10 mmPickled plate, 15/10 - 20/10 mm thick
AccessoriAccessories
Lamiera Aluzinc® spessore 15/10 - 20/10 mmAluzinc® sheet steel, 15/10 - 20/10 mm thick
VerniciaturaPowder coating
Standard RAL 7035 B grigio chiaro bucciatoRAL 7035 B light grey (orange peel)
A richiestaOn request
Colori scala RAL e acciao INOXPowder RAL colours and stainless steel
Componenti in plasticaPlastic components
Senza alogeni, ritardanti la fiamma, autoestinguenti, senza CFCHalogen-free, flame retardants, self-extinguishing, CFC-free
Su richiestaCustomizable features
Sistema SbarreBusbar system
Isolate / Argentatura / StagnaturaInsulated / Silvering / Tin plating
Componenti
Interruttore di posizione “cassetto in Test”Position switch “drawer in test position”Interruttore di posizione “cassetto Sezionato/Servizio”Position switch “drawer in disconnected/ connected position”Interruttore di posizione “cassetto Inserito/Estratto”Position switch “drawer in inserted/ withdrawn position”Interruttore di posizione“cassetto Inserito/Estratto Remoto” (N°2)Position switch“drawer in inserted/ remote withdrawn position” (n°2)
ARMADIOSINGOLOCABINET
ARMADIOCON VANO CAVI
CABINETWITH CABLE HOUSING
DY-MCCWITHDRAWABLEUNITS
16 | DYNAMIC | DYBT | QUADRI DISTRIBUZIONE ENERGIA BASSA TENSIONE
QUADRIELETTRICIPERL’AUTOMAZIONEINDUSTRIALEFINOA4000APOWER ELECTRICAL CABINETSFOR INDUSTRIAL AUTOMATION UP TO 4000 A
7 DY-AUTOMATION
ROBUSTI E PERSONALIZZABILI.
NATIPERSODDISFARETUTTELEESIGENZEDELL’AUTOMAZIONEINDUSTRIALE.OFFRONOUNASOLUZIONEDICABLAGGIOCONPIASTRAAINSERIMENTOFRONTALEOLATERALE.POSSONOESSEREDOTATIDISISTEMABARREINALLUMINIOOTRADIZIONALIINRAME.
Caratteristiche principali• Struttura assemblata, in lamiera, montanti spessore
20/10 mm.• Grado di protezione da IP30 in versione a giorno a IP55 con porta cieca o trasparente a
vetro temperato.• Possibilità di accoppiamento laterale.• Installazione apparecchiature di tutte le marche
(ABB, Schneider, Siemens, etc.).• Verniciatura a polveri epossidiche previa
fosfatazione nella tonalità RAL 7035 B (altre tonalità RAL a richiesta).
• A richiesta armadio in acciaio INOX.• Sistema di messa a terra brevettato.• Accessori interni a completamento per soluzioni di qualsiasi esigenza.• Test sismico CESI n. B3020327 con accelerazione 1,0g.• A richiesta sono disponibili misure diverse.
Contattare Dynamic per maggiori informazioni.
STRONG AND CUSTOMIZED.
DESIGNED AND PRODUCED TO MEET ALL REQUIREMENTS OF THE INDUSTRIAL AUTOMATION. THEY OFFER A WIRING SOLUTION WITH A PLATE THAT CAN BE INSERTED FRONTALLY OR SIDEWAYS. THEY CAN BE EQUIPPED WITH SLOPING OR ALUMINUM BUSBAR SYSTEM.
Main characteristics• Assembled structure made of sheet with a thickness
of 20/10 mm.• Degree of protection from IP30 (open version) to IP55
with blind door or transparent door with toughened glass.
• Possibility of side connection.• Installation of circuit breakers of all leading
manufacturers (ABB, Schneider, Siemens, etc.).• Epoxy powder coating after phosphating in RAL 7035
B (other colours on request).• On request, stainless steel cabinet.• Patented and certified earth connection system.• Full range of internal finishing accessories to provide
solutions for any requirement. • Seismic test CESI no. B3020327 with acceleration 1,0g.• Different sizes are available on request. Contact Dynamic for more information.
DYNAMIC | DYBT | LOW VOLTAGE ENERGY DISTRIBUTION SWITCHBOARDS | 17
DY-AUTOMATION Larghezza (L) mm Width (W) mm
Altezza (H) mm Height (H) mm
Profondità (P) mm Depth (D) mm
ARMADIOSINGOLOCABINET
625
1800 (200/250 posizionamento barre / bars positioning)2000 (200/250 posizionamento barre / bars positioning)2200 (200/250 posizionamento barre / bars positioning)
400 / 500 / 625 / 800 / 1000(utile/usable space = H - 100)
700
800
900
1000
ARMADIOCON PORTA A BATTENTECABLE CABINETWITH SWING-DOOR
1000
1800 (200/250 posizionamento barre / bars positioning)2000 (200/250 posizionamento barre / bars positioning)2200 (200/250 posizionamento barre / bars positioning)
400 / 500 / 625 / 800 / 1000(utile/usable space = H - 100)
1200
1400
1600
VANO CAVICABLE HOUSING
300 1800 (200/250 posizionamento barre / bars positioning)2000 (200/250 posizionamento barre / bars positioning)2200 (200/250 posizionamento barre / bars positioning)
400 / 500 / 625 / 800 / 1000400
ALTREDIMENSIONIOTHER DIMENSIONS
Contattare DynamicContact Dynamic
DATI ELETTRICIELECTRICAL DATA
Valori nominali di tensione Voltage ratings
Tensione nominale di isolamento (Ui)Rated insulation voltage (Ui)
690 V
Tensione nominale di impiego (Ue)Rated operational voltage (Ue) 400 V
Tensione nominale di tenuta a impulso (Uimp) Rated impulse withstand voltage (Uimp) 6 / 8 / 12 kV
Frequenza nominale (fn) Rated frequency (fn) 50 / 60 Hz
Valori nominali di corrente Current ratings
Corrente nominale (In) Rated current (In)
Fino a 4000 AUp to 4000 A
Corrente nominale di breve durata per 1 sec. (Icw) Rated short-time withstand current for 1 sec. (Icw) 75 kA
CARATTERISTICHEMECCANICHEMECHANICALCHARACTERISTICS
Grado di protezione IPIP degree of protection
InternoInternal
Fino a IP2XUp to IP2X
EsternoExternal enclosure
Da IP30 a IP55From IP30 to IP55
Grado di resistenza agli urti IKIK test (shock resistance)
IK09 porta a vetroIK09 glazed door
IK10 porta ciecaIK10 blind door
AccessibilitàAccess
Frontale / Laterale / PosterioreFrom the front / Side / Rear
EsecuzioneExecution
Forma 1 - 2Form 1 - 2
MaterialeMaterial
StrutturaStructure
Lamiera decapata spessore 15/10 - 20/10 mmPickled plate, 15/10 - 20/10 mm thick
AccessoriAccessories
Lamiera Aluzinc® spessore 15/10 - 20/10 - 25/10 mmAluzinc® sheet steel, 15/10 - 20/10 - 25/10 mm thick
VerniciaturaPowder coating
Standard RAL 7035 B grigio chiaro bucciatoRAL 7035 B light grey (orange peel)
A richiestaOn request
Colori scala RAL e acciao INOXPowder RAL colours and stainless steel
Componenti in plasticaPlastic components
Senza alogeni, ritardanti la fiamma, autoestinguenti, senza CFCHalogen-free, flame retardants, self-extinguishing, CFC-free
ARMADIOSINGOLOCABINET
ARMADIOCON VANO CAVI
CABINET WITHCABLE HOUSING
NOTE
www.dynamicelectric.it
DYNAMICS.R.L.VICENZA-SedeLegale/Produttiva
Via Della Tecnica, 3336075 - Montecchio Maggiore (VI)
PARMA-UnitàlocaleVia Piani di Riva, 13
43040 - Varano de’ Melegari (PR)
T.+39 0444 695869 - F.+39 0444 [email protected]
agente di zona
rev.01/2019-B
T/LV-IT/EN_studiobrand
.it