Post on 23-Jul-2016
description
WindowsF U R N I S H I N G YO U R H O M E
Direction: Gennaro DuranteArt Direction: Marlene DoerrieGraphic Design: GFCAssociatiPrint: Stampa Sud S.p.A.
Product illustrations and descriptions in this catalogue are only for reference.De Carlo Ltd reserves the right to make any esthetic and/or functional changes in all of its products when necessary for commercial ormanufacturing needs, without prior notice. De Carlo declines all responsibilities for any printing errors and omissions.De Carlo, 2015.All rights reserved.
DE CARLO CATALOGUE 2015
www.decarlo.it
UNI EN ISO 9001 Quality SystemMark of responsible forestry FSC
Discover the De Carlo Collections
DE CARLO CASA S.R.L.Via Appias.s.7 km 633.15074016 Massafra (TA)Tel +39 099 8833511decarlo@decarlo.it
www.decarlo.it
UNI EN ISO 9001 Quality SystemPEFC and FSC Sustainable forest management system
Discover the De Carlo Collections
pag.
Company 3
Logistics, assistance and installation 5
Finishing 6
Product testing laboratory 7
Laminated wood and forest management 8
CE Marking 10
Glazing 12
Windows 15
Minimal Wood 16
Wood Design 26
Wood WGlass 38
Wood Classic 42
Wood Arte 50
Exter Alu Design 58
Exter WGlass 70
Exter Alu Classic 76
Exter Alu Arte 84
Exter Verbund 86
Exter Bronze 88
Exter Glass 96
dWall 106
Entry doors 116
Shutters 130
Roll Flap shutter system 142
Product combinations 148
Handles 149
Anti-intrusion hardware 150
Woods and finishes 152
RAL painting on flat wood frame 153
Wood Finishes 154
Warranty 160
Index
1
In the photo: Domenico De Carlo (the first on the left)
2
Company
Thanks to the 50-year long experience, De Carlo is the most appreciated company in Italy with reference to wood and wood-aluminum windows. Windows, sliding windows, lift and slide doors, shutters, front doors, curtain walls available in the traditional lines (“arte” collection), classic lines (“classic” collection) and contemporary lines (“design” collection), for every kind of opening (sash, slide, pivot, awning, bull’s-eye).
De Carlo’s partners of the sales network have got a long-time experience in designing and making windows and special doors, from the design of the best solutions for the customer to the assistance for the installation, including the management of the building site measures.
Moreover, the technical office assists the customer in planning and testing the thermal and acoustic parameters of the house, in compliance with the national legislation, in order to protect the technical and commercial partners’ responsibilities.
All technical details are available on www.decarlo.it (see “De Carlo lab” section).
Today: The factory for the production of windows in San Basilio - Mottola (TA)
The photovoltaic installation produces the whole energy supply for the manufacturing (1.348.000 KWH in a year).
Department manual sanding
3
4
Logistics, assistance and installation
We take the utmost care of the different stages of this service, from the preparation of the product to the handling and transport up to the building site.
The new packing system for the windows provides the covering of the whole product, taking particular care of the corners where a shaped cardboard shell and a resistant shrinkable film provide a high protection against the possible impacts during the management of the windows in the building site.
Besides, the labeling of each piece gives all the information about the product and its dislocation in the installation department.
A great number of vehicles that serve all the national territory and that are exclusively dedicated to customers, assures maximum efficiency, rapidity and care during all the stages of products transport.
“The Guide for Windows” with the instructions about how to use and take care of the windows will be delivered together with the windows and a personal code of identification to facilitate any request for assistance after sale.
Skilled and specialized technicians assure the installers’ training according to the peculiarity of the sealing joint between the window and the wall, so as to assure air and water tightness between frame and counter-frame, and to avoid the noise diffusion.
5
Finishing
The colored coating contains particular pigments which, seeping through the wood, avoids its alteration caused by the UV rays so
preventing from any contaminations of fungi and bacteria.The intermediate coat stabilizes the wood fibers in order to limit
the micro-variations of the window dimensions caused by the variability of the weather conditions.
The application of the external and of the intermediate coating is carried out in a flow-coating systems, which assures the complete and accurate
painting of the window in all its parts. The hand sanding of all the windows makes the surface extremely regular
without any roughness, to enhance the beauty of the window.
The finish, carried out in electrostatic equipments with a controlled atmosphere, grants the right quantity of painting on the window in order
to assure a perfect covering and protection of the wood so exalting, in the same time, the beauty of the material.
De Carlo, after an exclusive and successful experimentation, is the first company to use a particular water paint, which is the result of a process
based on nanotechnology, for the finishing cycles.Thanks to this new technology, the covering particles are 1000 times
smaller than those of the traditional water paints.The optimization of these chemical-physical characteristics
of paint assures a better adhesion of the paint to the roughness of the wood. All this grants a longer life and an excellent preservation
of the esthetic features of the product.TRADITIONAL FINISH
NANOTECH FINISH
Frames in the finishing department
De Carlo’s warranty certificate - Finishing
De Carlo’s case for colors - wood finishes
6
Product testing laboratory
A research project made in collaboration with the Pro.Ge.S.A. department (Planning and Management of Agricultural and Forestry systems) at the University of Bari, has given life to a lab in the same plant, promoting the research and development of finishing products.Every day the lab, provided with state of the art equipments, represents the best and continuous way of checking the whole finishing process: from the verification of acceptance of the finishing products, to the control of environmental parameters of the finishing system; from the evaluation of suppliers and of the proposed painting cycles, to the quality control of the applied finishes.
For the most demanding customers, the existent equipment allows the supply of customized colors thanks to a spectrophotometer and an associated tintometric system.
The activities concerning development and experimentation widely improve the knowledge about the combinations of different kinds of wood and paintings by using a system for simulated weathering conditions, which simulates, in a short time, the effects of weathering (rain, UV rays, humidity, thermal variations) on the finish.
System for the electronic measure of the dry residue of the finish Testing of the finishing through the Simulated Weathering Equipment
7
Laminated Wood
The laminated product is obtained from three layers of wood glued together with cross-
directional fibers so as to balance the natural tension of the wood structure and ensure the stability of the window/door. For each kind of
wood used, pine, mahogany, oak, Douglas, larch, walnut, teak, specific drying parameters are established in collaboration with qualified
suppliers, in order to ensure a durable product.
Forest Protection
De Carlo products are made of wood from sustainable forestry.
De Carlo is a FSC® certified company.
Ask for certified products.
The air quality in your home
Ensuring clean air in your home is essential, especially for your health. Much has
been already done by removing unhealthy substances from building materials such as
lead, asbestos, formaldehyde etc...However, even now, in our houses there are
many pollutants. Volatile chemicals released by some products, windows, plastics, paints,
rubber materials, new furniture, are harmful substances which can affect the air quality inside the house resulting severe diseases. As for pollution due to such materials it is
important to opt for more natural products: hemp wool for insulation, wood for windows,
water-based paints, etc...Even though in Italy there are no standards
monitoring VOC (volatile organic compounds) emissions, De Carlo group has tested its products according to the
international standard examination so as to ensure its windows are “healthy”. De Carlo
windows have VOC emission levels of class A+* (tested according to the UNI EN ISO
16000-9). A “label A +” is the guarantee of a healthy air in your living space.
*Information about the emission level of volatile substances in the air inside the house that present a risk of inhalation on a scale from A+ class (low emissions)
to C (high emission level) - Ministry of Ecology Decree of the French Republic, April 19, 2011.
8
9
Air tightness
It’s the peculiarity of a closed window not to let the air in when a difference between internal and external pressure occurs.The main manufacturing characteristics of De Carlo’s windows which ensure air tightness (see the test certificate in compliance with UNI EN 1026) are: the stability of sashes and frames ( made of laminated wood and cross-directional fibers); the perimeter sealing of the glass; the opening system with a hardware provided with different locking points; the joining system with an airlock; a double gasket made of anti-wear thermoplastic elastomer (resistant to fields of application which go from -40° to 120°C).
Water tightness
It’s the window capacity of avoiding the infiltration of water even with a strong wind. It’s the hardest test, because the window is hit by an high pressure water jet. The water loss recorded at a particular level of pressure allows the classification of the window in its tightness class; De Carlo’s windows are tested in order to reach the highest level of tightness (see test certificate in compliance with UNI EN 1027).
Wind resistance
It’s the capacity of resisting to strong pressure and/or depression, as for those caused by the wind, keeping an acceptable deformation and preserving its propriety of protecting the users’ safety. The window undergoes hard and heavy differences of pressure in order to test if its functional characteristics are perfectly preserved. In compliance with UNI EN 12210, the window can be classified into five classes as regard the wind pressure; De Carlo’s windows have successfully passed the tests of C5 class (the highest class of performance, see test certificate).
In compliance with these requirements the test results of De Carlo’s windows are:- Air tightness: class 4 (class of maximum performance)- Water tightness: class E1200 (experimental class of maximum performance)- Wind tightness: class C5 (class of maximum performance)
EC conformity Marking
10
Sound insulation
Rw: it’s a soundproofing standardized index measured in Decibels (db). The bigger is its value, the higher is the insulation; it is, however, necessary to remember that the scale of this coefficient is logarithmic and it’s important to underline how, for instance, an insulation of 35 db means to half the intensity of the sound in comparison with an insulation of 32 db. The characteristics of sound insulation of wood are unquestioned, but the soundproofing capacity of the window depends on the glass; De Carlo’s glasses Denergy maximize the insulation performances up to the value of noise abatement (Rw) of 40 db. These performances, tested in compliance with the International Standard ISO 140/30 in the reverberant double room of De Carlo lab, allow the acoustic comfort of the house even in case of heavy external noise pollution (city traffic, passage of vehicles, outdoor workplaces).
Anti-intrusion safety
Breaking-in and entering attempts are made using hand tools, for example screwdrivers, pliers and/or shims. The aim is to unhinge the sash from its frame or to break the glass to reach the handle.In addition to the standard safety characteristics of De Carlo’s windows, including the multi-locking point hardware, the customer can ask for a higher anti-intrusion coefficient (PLUS-CR2-CR3 base)* with safety glass (in combination with oak wood), a specific handle with a safety button or with removable keys, anti-intrusion hardware, and finally, a alarm system set up.The resistance class is established by the methods of testing according to the time we need to open the window (see UNI ENV1627). De Carlo’s anti-intrusion windows grant high levels of safety, preserving the same characteristics of thermal and acoustic insulation and the style of the Classic, Art and Design Wood lines.
*See pg 150-151 Safety Section
Thermal Transmittance (U-value)
More than 30% of the heat loss in a house passes through the windows. In order to minimize the heat loss, the external elements of the building must have a low value of transmittance.The thermal transmittance of windows (Uw) represents the average between the thermal transmittance of the frame (Uf) and the one of the glass (Ug). The declared values of transmittance are the results of tests and evaluations made in compliance with the European Standard UNI EN 14351-1 for EC marking.All De Carlo’s windows are fit for the energy certification of any climate area; the “Klima” lines reach coefficients of thermal transmittance suitable for eco-labeled Class A+ buildings.The class of energy needs of the building is determined by its architectural characteristics, which in turn the lines of De Carlo’s windows are fitted to.
11
Double glass Ug 1,1 Fs 55% Rw 36 dB
Triple glass Ug 0,7 Fs 45% Rw 37 dB
Double glass Ug 1,0 Fs 38% Rw 36 dB
Triple glass Ug 0,7 Fs 34% Rw 37 dB
DenergySolarDenergy
Most of the heat in a house tends to go outwards; the 40% of this loss passes through the windows. The multi-layers insulating Denergy glasses, which are standardized on every De Carlo’s window, present a low-e coating that allows the preservation of the heat inside the building. As a result, the expense for the heating will be reduced, increasing the comfort of the house.
Wellness at homeEven in summer the heat intensity can be controlled so as to take maximum advantage of the big glass surfaces of the house all year long. Assuming that a traditional low-emission glazing produces a loss of 76% of the sun’s heat, it is better to use a thermo-regulating glass. De Carlo’s Denergy double glass is a thermo-regulating glass thanks to a special invisible coating with a capacity of reflecting and/or non-reflecting the sunlight which is higher than that of the ordinary panes. In winter, on the contrary, it preserves the heat inside the house.
Protection against the sun
Glasses
Invisible coating (coating)
Internal heat
Invisible coating (coating)
38% SunFactor (FS)with double glass
34% SunFactor (FS)with triple glassInsideInside OutsideOutside
Configurable up to Ug 1,0 with double glazing and Ug with triple glazing Configurable up to a S.F. (Solar Factor) of 25%
12
Ug - Thermal transmittance of the glass - The lowest this value, the highest the thermal insulation capacityFs - Solar Factor - The lowest this value, the lowest the quantity of solar energy transmitted inside the building
Rw - Noise reduction of the window - The highest this value, the highest the acoustic insulation
Notes: These values refer to the glasses with Argon gas of De Carlo’s Wood collections
DenergyAcoustic
Noise is all around us and it is impossible to limit it at the source. That’s why we must protect ourselves, at the best, against it. In order to meet this need, Denergy Acoustic double glass grants an high acoustic insulation keeping noise pollution outside the building without altering the solar gain.
What do you hear?
DenergyTop
It has a double glass and an invisible coating with a high soundproofing capacity and a thermo-regulating performance.
Total protection
Double glass Ug 1,1 Fs 54% Rw 41 dB
Triple glass Ug 0,7 Fs 45% Rw 39 dB
Double glass Ug 1,0 Fs 37% Rw 41 dB
Triple glass Ug 0,7 Fs 34% Rw 39 dB
37% SunFactor (FS)with double glass
34% SunFactor (FS)with triple glass
Invisible coating (coating)
41% Acoustic Insulation (dB)with double glass
39% Acoustic Insulation (dB)with triple glass
41% Acoustic Insulation (dB)with double glass
39% Acoustic Insulation (dB)with triple glassInsideOutside
Configurable up to a S.F. (Solar Factor) of 25% and Rw of 50 dBConfigurable up to Rw of 50 dB
13
14
The Windows Minimal Wood
WoodWood DesignWood WGlassWood ClassicWood Arte
Wood/AluminumExter Alu DesignExter Alu WGlassExter Alu ClassicExter Alu ArtExter Verbund
Wood/BronzeExter Bronze Classic
Wood/GlassExter Glass Design
dWall
15
MinimalWood
MinimalWood is the last line of De Carlo’s windows and doors; it is the answer to the most demanding market requirements. The reduction of the frame thickness in favor of a wider glass surface allows maximum daylight opening while keeping the utmost thermo-insulation performances (0,9 Uw). De Carlo MinimalWood windows and French doors are characterized by clean and essential lines. Find MinimalWood in www.decarlo.it and in www.decarlolab.it.
One sash French Door - Internal View
16
17
Sash detail - internal view
Sash detail
Sash and handle detail
One sash French door - external view - with Hidden Frame
18
19
French door, external view with hidden frame
Detail of French door and window threshold Sash detail, external side (only glass)
Sash detail
20
21
Detail of double-sash window
Sash detailDetail of double-sash window central section
Double-sash central section Double-sash window, external view “exposed frame” solution
22
23
Double-sash window, internal view
24
External windows and French doors, made with laminated wood profiles, fixed frame with a 87x90 mm section for three perimeter sides, with bottom profile of anodized aluminum in the external side and wood in the internal edge. Opening sash of 57 x 101 mm section. Squaring and profiling made for hardware system in air 12, deviation of locking points from the rotation axis with a 13 mm opening. Structural profile of polyamide.Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Top-coat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Hardware components tested according DIN EN 1670 and EN ISO 9227 standards in compliance with the resistance requirements of class 5. Certificate of conformity to the standard ASTM B117-02 for
USA. Concealed hinges, adjustable on three axis with maximum load of 130 kg, with ABS clad gold, bronze or satin chrome colored. Double gasket inserted into the frame for thermal insulation made of thermoplastic elastomer (EPDM) resistant to the application fields from -40 to 120°C, and to aging caused by weathering, fine dust emissions and UV rays. Co-extruded internal foam gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. Coating cycles made by the application of nanotechnology water painting. Double or triple layer glass with thermal cut spacers, joined to the panes by a double structural perimeter seal, produced in compliance with EN 1279-5 (CE Marking insulating glasses). Layer glass fixed by structural sealing to wood support.
MinimalWood
Minimal Wood (double glass)
4
9A
C5
from 36 to 45 dB (*)
until CR2
1,31 a 1,36 W/m2k
A+
A
B
C
D
E
F
G
collection line frame glass window
Minimal Woodfir, pine
MW Uf=1,233.1/15 argon/33.1 BE
Uw=1,31Ug=1,1 FS=56%
Minimal Woodoak
MW Uf=1,4933.1/15 argon/33.1 BE
Uw=1,36Ug=1,1 FS=56%
Minimal Wood Plus (triple glass)
A+
A
B
C
D
E
F
G
4
9A
C5
from 37 to 50 dB (*)
until CR2
0,99 a 1,04 W/m2k
collection line frame glass window
Minimal Wood Plusfir, pine
MW+ Uf=1,1433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=0,99Ug=0,7 FS=45%
Minimal Wood Plusoak
MW+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,04Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
25
Wood Design
Ideal for modern or contemporary environments, the Design line is characterized by profiles with a linear and minimal shape (square glass-holder).
Triple lights French window with fixed sidelights26
27
Glazed wall with French door and lock
28
French door with tilt and turn operation, mosquito net and Roll Flap shutter system
Detail of an handle with anti-intrusion safety button
French door, detail of Wood Design Line in the CR3 anti-intrusion version
Wood Design 29
30
Glazed wall with French window and lock, made of brushed white painted laminated oak
Wood Design 31
32
Lift and slide door - outside view
Wood Design 33
Lift and slide door with fixed sash
34
Horizontal Section Horizontal Section
Vertical Section Vertical Section
Wood Design, ideal for modern and contemporary environments, the Design Line is characterized by linear profiles which gives a sober and minimal look to the window (see the square glass-holder in detail); also available in TL (top line) version for the 68 and 78 sections.Sash and frame (window and French window) of laminated wood. Safety low-e double glass “Denergy”, spacers with thermal cut (upon request).Double gaskets on the frame for thermal and acoustic insulation. Dripper made of wood. Threshold less than 25mm high (in compliance with the laws for removing the architectural barriers) with thermal cut (upon request) for French doors.Painting cycle with hand sanding and finish containing acrylic resins in water emulsion, finish with UV filters, 10-year De Carlo warranty.Perimeter sealing of the glass. Opening mechanism with multipoint hardware made of steel with copper-zinc parts, with self-adjusting bolts for the perfect adhesion between sash and frame, with Tricoat treatment for better resistance to corrosion, weathering, salt fogs and acids. Adjustable hinges in three dimensions in order to assure the correct functionality even when possible natural adjustments occur after installation.
Wood Design
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer.(*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer.(*) Rw values of glass
collection line frame glass window
Woodpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Woodoak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
collection line frame glass window
Woodpine, larch
78Klima
Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE
Uw=0,96Ug=0,7 FS=45%
Woodoak
78Klima
Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Lift and Slide Wood Design 78 (triple glass)Lift and Slide Wood Design 68 (double glass)
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 to 1,4 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR2
0,96 to 1,0 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
35
Wood Design 68 (double glass)
collection line frame glass window
Woodpine, larch e mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Woodoak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
Wood Design 78 (triple glass)
collection line frame glass window
Woodpine, larch
78 Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Woodoak
78 Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,3Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 77 mm width (window and French door)Profile 107 mm width (front door with lock, sliding and pivot windows)
Profile 107 mm width (window, French door)Profile of the top and bottom transoms with customized width (for all versions)
Frame Section(window, French door)
Profile 80 mm width (with join mill or flush) Supplementary mill (customized for restructuring)
Dripper (window) Wood Aluminum
Type of opening (window and French door)
Sash Tilt and Turn
Anti-intrusion (see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Only for windows and French windowsAnti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2Anti-intrusion CR3 (only oak, only single sash)
Central closing section (double sash window and French door)
With added mullion (symmetrical section) Without added mullion (asymmetric section)
Threshold Aluminum (silver, dark brown, white) Thermal cut/wood transom upon request
Hinges Multimatic (with Tricoat anticorrosion treatment, 10 year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)
Glass spacer Aluminum ( different colors) Thermal cut (grey, black, white)
Finish Smooth Aged (only pine, oak and larch)/brushed (only oak)
Bottom transom of the French door sash
Sash profile with a 107mm transom (also TL version)Two 77mm transoms (133mm high)/three 77mm transoms (188 mm high) /two 107 mm transoms (193 mm high)/three 107 mm (278 mm high)/customized single transom (from 108 to 400 mm high)/for TL version single option: customized single transom (from 108 to 400mm high)
Mouldings Three sides mouldings type A 35x9 / 45x9 /55x9) - type B (55x12) Mouldings with width bigger than 55mm
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR3
1,1 a 1,3 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
36
Wood Design 68TL (double glass) Wood Design 78TL (triple glass)
Wood Design 92 Klima (triple glass)
Wood Design 78 Klima (triple glass)
collection line frame glass window
Woodpine, larch
78Klima
Uf=1,233.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Woodoak
78Klima
Uf=1,533.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Performance Features ( see Wood Design 68)Performance Features ( see Wood Design 78)Available in the version 78 Klima
collection line frame glass window
Woodfir, pine, larch
92Klima
Uf=1,033.1 BE/12 argon/4/18 argon/33.1 BE
Uw=0,8Ug=0,6 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
4
E1200
C5
from 37 to 50 dB (*)
until CR2
0,8 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,0 a 1,1 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
37
Glazed Wall - Line Wood WGlass with fixed side lights, two sashes lift and slide in honey finished laminated oak
Wood WGlass
The Wood WGlass line is a De Carlo’s special project of lift and slide doors; the fixed glass frame is characterized to be integrated in the wall.
38
39
40
Detail of sliding sash with fixed sidelight and frame integrated in the wall structure
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. (*) Rw values of glass
collection line frame glass window
Woodpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Woodoak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. (*) Rw values of glass
collection line frame glass window
Woodpine, larch
78Klima
Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE
Uw=0,96Ug=0,7 FS=45%
Woodoak
78Klima
Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Lift ans Slide Wood WGlass 78 (triple glass)Lift ans Slide Wood WGlass 68 (double glass)
Horizontal Section Horizontal Section
Vertical Section Vertical Section
Wood WGlass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
0,96 a 1,0 W/m2k
A+
A
B
C
D
E
F
G
41
Wood Classic
The Classic line, suitable for both modern and classic architectural styles, is characterized by a round shaped internal profile (see the glass-holder in detail). Sash and frame of laminated wood (see Wood and Finishes).
Wood Classic glass door made of laminated oak, Brenner walnut stainedFront glass door with central opening sash and fixed sidelights
42
43
Glass door of laminated oak, Brenner walnut stained, central opening sash with fixed sidelights, arched transom windowSingle sash front glass window (with lock) and fixed arched transom windowSingle sash French Door (with lock)
44
Wood Classic 45
Single sash front French door with fixed arched transom windowSingle sash window with awning opening
46
Double sash front French door of laminated oak, Brenner walnut stained with handle and lock
Detail of French door made of brushed laminated oak Brenner walnut stained
Wood Classic 47
Wood Classic 68 (double glass)
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
collection line frame glass window
Woodpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Woodoak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
The Wood Classic line, suitable for both modern and classic architectural styles, is characterized by a rounded shaped internal profile (see the glass-holder in detail). Sash and frame (window and French door) of laminated wood. Safety double-glazing Denergy, low-e with thermal cut spacers (upon request). Double gaskets on the frame for thermal and acoustic insulation. Dripper made of wood. Floor threshold less than 25 mm high (in compliance with the laws pursuing the removal of architectural barriers) with thermal cut (upon request) for French doors. Finishing cycle with hand sanding and acrylic resin-based finish in water emulsion, finish with UV filters, De Carlo’s 10-year warranty. Perimeter sealing of the glass. Opening mechanisms provided with multipoint hardware made of steel, with copper-zinc parts and self-adjusting bolts for the perfect adhesion between sash and frame, with Tricoat treatment for better resistance against corrosion and other atmosphere agents such as saline fogs and acids. Adjustable hinges in three dimensions in order to grant the perfect functionality even after possible adjustments occurring after installation.
Wood Classic
Wood Classic 78 (triple glass)
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
collection line frame glass window
Woodpine, larch
78 Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Woodoak
78 Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,3Ug=0,7 FS=45%
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,3 W/m2k
A+
A
B
C
D
E
F
G
48
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 77mm width (window and French door)Profile 107 mm width (front door with lock, sliding and pivot windows)
Profile 107 mm width (window and French door)Profile of the top and bottom transoms with customized width (for all versions)
Frame Section (window, French door) Profile 80 mm width (with join mill or flush) Supplementary mill (customized for restructuring)
Dripper (window) Wood Aluminum
Type of opening(window and French door)
Sash Tilt and Turn
Anti-intrusion (see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Only for windows and French windowsAnti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2 Anti-intrusion CR3 (only oak, only single sash)
Central closing section (double sash window and French door)
With added mullion (symmetrical section)Without added mullion (asymmetric section)Without added mullion and with central handle (asymmetric section)
Threshold Aluminum (silver, dark brown, white) Thermal cut/ wood transom upon request
Hinges Multimatic (with Tricoat anticorrosion treatment, 10- year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10 year warranty)
Glass spacer Aluminum ( different colors) Thermal cut (grey, black, white)
Finish Smooth Aged (only pine, oak and larch)/brushed (only oak)
Bottom transom of the French door sash
Sash profile with n° 2 - 77 mm transoms (h at 133 mm )Two 77mm transoms (133mm high)/three 77mm transoms (188 mm high) /two 107 mm transoms (193 mm high)/three 107 mm (278 mm high)/customized single transom (from 108 to 400 mm high)/for TL version single option: customized single transom (from 108 to 400mm high)
Mouldings Three sides mouldings type A 35x9 / 45x9 /55x9) - type B (55x12) Mouldings with width bigger than 55mm
Wood Classic 78 Klima (triple glass)
Wood Classic 92 Klima (triple glass)
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
collection line frame glass window
Woodpine, larch
78Klima
Uf=1,233.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Woodoak
78Klima
Uf=1,533.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumer. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
collection line frame glass window
Woodfir, pine, larch
92Klima
Uf=1,033.1 BE/12 argon/4/18 argon/33.1 BE
Uw=0,8Ug=0,6 FS=45%
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0
from 37 to 50 dB (*)
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,0 a 1,1 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
0,8 W/m2k
A+
A
B
C
D
E
F
G
49
Wood Arte
The Arte line is characterized by the design of the internal and external profiles in the three versions: Arte, Arte OG and Arte OV, particularly suitable for the renovation of historic houses and period buildings and for classic environments. Sash and frame of laminated wood.
Arte line French door with simulated divided lights (Sdl) and bottom panels of painted laminated oak with customized
internal coating and upper moulding50
51
Window of white paint laminated oak with simulated divided lights
52
Double sash window of white paint laminated oak with fixed sidelights
Wood Arte53
French door of laminated oak with simulated divided lights and bottom panelsDetail of bicolor white paint at the external side and custom stain at the internal side
54
Detail of a section without added mullion, with central handle
Detail of Arte OG line with central symmetric section, flush mullions and transoms assembled without any visible junction
Detail of upper transom with fixed arched glass window and inner awning sash
Wood Arte55
Wood Arte 68 (double glass)
collection line frame glass window
Woodpine, larch e mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Woodoak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
The Arte line is characterized by the design of the internal and external profiles (in the “Arte”, “Arte OG” and “Arte OV” version), particularly suitable for the restructuring of historic buildings, period houses and classic environments. Sash and frame (window and French door) of laminated wood. Safety double layer glass Denergy, low-e with spacers with thermal cut (upon request). Double gasket on the frame for thermal and acoustic insulation. Drippers of wood. Floor threshold less than 25 mm high (in compliance with the laws for removing the architectural barriers) with thermal cut (upon request) for French doors. Finishing cycle with hand sanding and acrylic resin-based finish in water emulsion, finish with UV filters, De Carlo’s 10-year warranty. Perimeter sealing of the glass. Opening mechanisms with multipoint hardware made of steel, with copper-zinc parts, with self-adjusting bolts for the perfect adhesion between sash and frame, with Tricoat treatment for the better resistance to corrosion and other atmospheric agents such as saline fogs and acids. Adjusting hinges in three dimensions in order to grant the proper functionality even after possible adjustments occurring after installation.
Wood Arte
Wood Arte 78 (triple glass)
collection line frame glass window
Woodpine, larch
78 Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Woodoak
78 Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,3Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,3 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
56
Wood Arte OG 68 Wood Arte OV 68
Wood Arte 78 Klima (triple glass)
Line Art and Art OG OV also available 78 and 78Klima
collection line frame glass window
Woodpine, larch
78Klima
Uf=1,233.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Woodoak
78Klima
Uf=1,533.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 77mm width (window and French door)Profile 107 mm width (front door with lock, sliding and pivot widows)
Profile 107 mm width (window, French window)Profile of the upper and bottom transoms with customized width (for all versions)
Frame Section(window, French door)
Profile 80 mm width (with join mill or smooth) Supplementary mill (customized for restructuring)
Dripper (window) Wood Aluminum
Type of opening (window and French door)
Sash Tilt and Turn sash
Anti-intrusion(see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Only for windows and French doorsAnti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2Anti-intrusion CR3 (only oak, only single sash)
Central closing section (double sash window and French door)
With added mullion (symmetrical section)Without added mullion (asymmetric section) /without added mullion with central handle (symmetrical section)
Threshold Aluminum (silver, dark brown, white) Thermal cut / wood transom upon request
Hinges Multimatic (with anticorrosion Tricoat treatment, 10 year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10 year warranty)
Glass spacer Aluminum (optional colors) Thermal cut (grey, black, white)
Finish Smooth Antiqued (only pine, oak and larch)/brushed (only oak)
Bottom transom of the French door sash
Sash profile with two 77mm transoms (133mm high); for OG and OV profile, sash with single transom of wood (107 mm high)
Three 77mm transoms (188mm high)/single transom (107 mm ) /two 107 mm transoms (193 mm high)/three 107 mm (278 mm high)/customized single transom (from 108 to 400 mm high); for OG and OV single option: customized measure of single transom (from 108 to 400 mm high)
Mouldings Three sides mouldings type A 35x9 / 45x9 /55x9) - type B (55x12) Mouldings more than 55mm width
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,0 a 1,1 W/m2k
A+
A
B
C
D
E
F
G
57
Exter Alu Design
Exter Alu Design is characterized by sash and frame of laminated wood with an aluminum cladding; “Design” refers to the square shaped profiles, both internal and external, suitable for contemporary environments.
Exter design line, wood-aluminum, of laminated natural oak with silver oxidized aluminum cladding, with
45-degree gasket joint. Vertical pivot opening58
59
Vertical pivots of naturally finished laminated oak
60
Lift and slide door of naturally finished laminated oak Solution with adjustable louvers Roll Flap shutter system
Exter Alu Design 61
Detail of lift and slide, Exter Design line with double bottom transom and solution with adjustable louvers Roll Flap shutter system
62
Horizontal pivot of laminated oak, with 360-degree internal opening, detail of safety catcher
Vertical pivot, detail of opening system on bottom side
Exter Design French door with triple bottom transom and anti-intrusion metal protection
Detail of lift and slide door with double bottom transom of naturally finished laminated oak
Exter Alu Design 63
64
Lift and slide door of naturally finished laminated oak, internal side
Exter Alu Design 65
66
Exter line lift and slide door with silver oxidized aluminum cladding
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. (*) Rw values of glass
collection line frame glass window
Woodpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Woodoak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. (*) Rw values of glass
collection line frame glass window
Woodpine, larch
78Klima
Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE
Uw=0,96Ug=0,7 FS=45%
Woodoak
78Klima
Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Lift and Slide Exter Alu Design 68+ (triple glass)Lift and Slide Exter Alu Design 68 (double glass)
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
0,96 a 1,0 W/m2k
A+
A
B
C
D
E
F
G
Exter Alu Design
Horizontal Section Horizontal Section
Vertical Section Vertical Section
67
Exter Alu Design 68 (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
Exter Alu Design 68+ (triple glass)
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,2Ug=0,7 FS=45%
Exter “Alu Design” is characterized by sash and frame of laminated wood with aluminum cladding. “Design” refers to the square shaped profiles, both internal and external, suitable for contemporary environments. Aluminum cladding (in the two versions, welded or joined) with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualocoat standards; paint cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of operations. The double layer glasses are installed with a perimeter glass-to-frame dowelling . Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.
Exter Alu Design
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,2 W/m2k
A+
A
B
C
D
E
F
G
68
Exter Alu Design 78 Klima (triple glass)
Exter Alu Design 68 Thermo Plus (triple glass)
collection line frame glass window
Exterfir
78Klima
Uf=1,233.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Exteroak
78Klima
Uf=1,533.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
collection line frame glass window
Exterfir
68Passive
Uf=0,7833.1 BE/12 argon/4/12 argon/33.1 BE
Uw=0,76Ug=0,7 FS=45%
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 81mm width (window and French door)Profile 109mm width (front door with lock, lift and slide and pivot widows)
Profile 109 mm width (window, French window)
Frame Section(window French door)
Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width*aluminum cladding 53 mm width for arched shapes
Supplementary mill (customized for restructuring)Aluminum Clad Profile of 53 mm or 69 mm
Type of opening (window and French door)
Sash Tilt and turn sash
Anti-intrusion (see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Anti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2
Central closure section (double sash window and French door)
With added mullion (symmetrical section) Without added mullion (asymmetric section)
Threshold (French door) Aluminum (silver, dark brown, white) Thermal cut
Hinges Multimatic (with anticorrosion Tricoat treatment, 10-year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)
Glass spacer Aluminum (optional colors) Thermal cut (grey, black, white)
Finish Smooth Antiqued (only pine, oak and larch)/brushed (only oak)
Bottom transom of the French door sash
Sash profile with two transoms 81 mm high (137 mm high)A 109mm transom /two transoms 109 mm high (193 mm high ) /three transoms 109 mm high (274 mm high)/three transoms 81 mm high (194 mm high)
External aluminum cladding Assembled Welded (except oxidized and wood effect finishes)
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,0 a 1,1 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
0,76 W/m2k
A+
A
B
C
D
E
F
G
69
Exter WGlass line, wood-aluminum, pure white painted laminated oak
Exter WGlass
Exter WGlass line is a special designed product for the lift and slide operation of a De Carlo alu-clad door. The side fixed light is totally integrated into the wall structure.
70
71
72
Exter Wglass
Exter WGlass line, wood-aluminum, pure white welded
73
74
Exter WGlass
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,0 a 1,1 W/m2k
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,333.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exter WGlass line, wood-aluminum, pure white weldedDetail of lift and slide door
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers.(*) Rw values of glass
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers.(*) Rw values of glass
Exter WGlass 68+ (triple glass)Exter Wglass 68 (double glass)
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
Horizontal Section Horizontal Section
Vertical Section Vertical Section
75
Exter Alu Classic
The Exter Alu Classic line is characterized by the shaped internal profile designed for classic or traditional environments.
Double sash French door with concealed hinges, fixed sidelights and arched top light
76
77
Double sash French door with fixed sidelights and arched top light, external cladding of bronze paint aluminum
78
double sash French door and arched top light, external cladding of dark bronze painted aluminum
Exter Alu Classic line, detail of the junction section of the sash to the sidelight
Exter Alu Classic 79
Double sash French door, external cladding of dark bronze painted aluminum. Detail of the tilt and turn operable sash
80
Double sash French door and arched top light, internal side(pure white painted pine)
Detail of bottom transom with two added transoms Detail of upper transom with tilt and turn operable sash
Exter Alu Classic 81
Exter Alu Classic 68 (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
Exter Alu Classic line is characterized by laminated wood sash and frame with aluminum cladding; “Classic” refers to the traditional shape of internal profiles, designed for classic or traditional environments. Aluminum cladding (in the two versions, welded or joined) with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualocoat standards; finishing cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of operation. The double layer glasses are installed with a glass-to-frame dowelling on the frame. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resistance to corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.
Exter Alu Classic
Exter Alu Classic 68+ (triple glass)
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,2Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima” is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima” is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,2 W/m2k
A+
A
B
C
D
E
F
G
82
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 81mm width (window and French door)Profile 109mm width (front door with lock, lift and slide and pivot widows)
Profile 109 mm width (window, French door)
Frame Section(window French door)
Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width**aluminum cladding 53 mm width for arched shapes
Supplementary mill (customized for restructuring). Aluminum cladding from 53 to 69 mm
Type of opening (window and French door)
Sash Tilt and Turn sash
Anti-intrusion (see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Anti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2
Central closure section (double sash window and French door)
With added mullion (symmetrical section)Without added mullion (asymmetric section) /Without added mullion with central handle (symmetric section)
Threshold (French door) Aluminum (silver, dark brown, white) Thermal cut
Hinges Multimatic (with anticorrosion Tricoat treatment, 10-year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)
Glass spacer Aluminum (optional colors) Thermal cut (grey, black, white)
Finish Smooth Antiqued (only pine, oak and larch)/brushed (only oak)
Bottom transom of the French door sash
Sash profile with two transoms 81 mm high (137 mm high)Transom 109 mm high/two transoms 109 mm high (193 mm high)/three transoms 109 mm high (274 mm high)/three transoms 81 mm high (194 mm high)
External aluminum cladding Assembled Welded (except oxidized and wood effect finish)
Exter Alu Classic 78 Klima (triple glass)
collection line frame glass window
Exterfir
78Klima
Uf=1,233.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Exteroak
78Klima
Uf=1,533.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima” is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,0 a 1,1 W/m2k
A+
A
B
C
D
E
F
G
83
Exter Alu Arte
Art OG and OV Lines available also 78 Klima and 68 Passive
Exter Arte 68 OG (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
Exter Arte 68+ OG (triple glass)
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,2Ug=0,7 FS=45%
The Exter Alu Arte line is characterized by laminated wood sash and frame with aluminum cladding; “Arte” refers to the traditional shape of internal profiles in OG and OV versions designed for classic and traditional environments. Aluminum cladding (in the two versions, welded or joined) with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualicoat standards; finishing cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof corde and flexible gasket components in order to soften the impact of operations. The double layer glass is installed with a glass-to-frame dowelling on the perimeter. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,2 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
84
Exter Arte 68 OV (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
Exter Arte 68+ OV (triple glass)
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,2Ug=0,7 FS=45%
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 81mm width (window and French door)Profile 109mm width (front door with lock, lift and slide and pivot widows)
Profile 109 mm width (window, French door)
Frame Section(window French door)
Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width** aluminum cladding 53 mm width for arched shapes
Supplementary mill (customized for restructuring).Aluminum cladding from 53 to 69 mm.
Type of opening (window and French door)
Sash Tilt and Turn sash
Anti-intrusion (see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Anti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2
Central closure section (double sash window and French door)
With added mullion (symmetrical section) Without added mullion with central handle (symmetric section)
Threshold (French door) Aluminum (silver, dark brown, white) Thermal cut
Hinges Multimatic (with anticorrosion Tricoat treatment, 10-year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)
Glass spacer Aluminum (optional colors) Thermal cut (grey, black, white)
Finish Smooth Antiqued (only pine, oak and larch)/brushed (only oak)
Bottom transom of the French door sash Sash profile with single transom 109 mm high Single wood transom 193 mm high with two aluminum profiles
External aluminum cladding Assembled Welded (except oxidized and wood effect finish)
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0.
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,2 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
85
86
Exter Verbund is characterized by sash and frame made of wood with aluminum cladding on both sash and frame. In detail, an external sash with 6mm laminated glass, which can be opened by clips, give access to Venetian blinds with side rails in the same color. Paint cycle of wood with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. The double layer glasses are installed with a glass-to-frame dowelling on the perimeter. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resistance to corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.
Exter Verbund
Exter Verbund 68 (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
87
Exter Bronze
The Exter Bronze line includes wood windows with bronze cladding. Exter Bronze is available in Classic, Arte and Design lines.
Exter Bronze lift and slide door, detail of the external cladding88
89
90
Exter Bronze Classic 68 lift and slide door of brushed laminated oak - wengè stained (internal side), with fixed glass light in the middle
Exter Bronze 91
92
Front door with bronze cladding
detail of bronze cladding
detail of sliding door, internal side
Exter Bronze tilt and turn window, external view Exter Bronze 93
Exter Bronze 68 (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
Exter Bronze 68+ (triple glass)
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,2Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
Exter Bronze is characterized by laminated wood sash and frame with bronze cladding; available in Classic, Arte and Design versions. Bronze cladding with opened joint for ventilation in order to avoid condensation inside the system. The aluminum finish made with epoxy powders in compliance with Qualocoat standards; paint cycle with hand sanding and acrylic resin-base finish in water emulsion, UV filter finish, De Carlo’s 10-year warranty. Double gasket on clipped frame for thermal and acoustic insulation (of thermoplastic elastomer) resistant to aging, weathering, fine dust emissions, UV rays. Co-extruded internal gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. The double layer glasses are installed with a perimeter glass-to-frame dowelling. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.
Exter Bronze
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
A+
A
B
C
D
E
F
G
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,2 W/m2k
A+
A
B
C
D
E
F
G
94
Exter Bronze 78 Klima (triple glass)
collection line frame glass window
Exterfir
78Klima
Uf=1,233.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,0Ug=0,7 FS=45%
Exteroak
78Klima
Uf=1,533.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 81mm width (window and French door)Profile 109mm width (front door with lock, lift and slide and pivot widows)
Profile 109 mm width (window, French door)
Frame Section (window French door)
Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width**aluminum cladding 53 mm width for arched shapes
Supplementary mill (customized for restructuring). Aluminum cladding from 53 to 69 mm
Type of opening (window and French door)
Sash Tilt and turn sash
Anti-intrusion (see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Anti-intrusion base/Anti-intrusion Plus/ Anti-intrusion CR2
Central closure section (double sash window and French door)
With added mullion (symmetrical section) Without added mullion with central handle (symmetric section)
Threshold (French door) Aluminum (silver, dark brown, white) Thermal cut
Hinges Multimatic (with anticorrosion Tricoat treatment, 10-year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)
Glass spacer Aluminum (optional colors) Thermal cut (grey, black, white)
Finish Smooth Antiqued (only pine, oak and larch)/brushed (only oak)
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0
Available also in the Exter Bronze Design and Art (OG/OV) lines
from 36 to 45 dB (*)
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,0 a 1,1 W/m2k
A+
A
B
C
D
E
F
G
95
Exter Glass
The Exter Glass line includes a full range of windows, French doors, sliding doors, with external glass cladding. As for windows and French doors, the Exter Glass Hidden version (with the frame integrated into the wall) belongs to the same line.
Exter Glass line, glazed lights with joined corner, black printed tempered glass
96
97
98
Sliding door with corner glazed light, made of whitened laminated oak
Exter Glass 99
Exter Glass, detail of internal corner joined units, whitened laminated oak
100
Exter Glass, external side with black printed glass, corner with lift and slide door on one side
Detail of external junction
Exter Glass 101
102
Exter Glass French door, “Hidden” version, with all glass effect window and frame perfectly integrated into the wall (from external side)
Exter Glass French door “Hidden” version (internal side)
Exter Glass 103
Exter Glass 68 (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
The Exter Glass line is characterized by laminated wood sash and frame with glass cladding. Aluminum-clad on the frame for French doors and windows (welded or assembled aluminum upon customers’ request), AW 6060 alloy with open junction for ventilation in order to avoid condensation inside the system, finish made with epoxy powders in compliance with “Qualicoat” standards. Sashes with tempered glass cladding in the sliding version and windows/French doors available in the Glass version (anti-accident multi-layer glass Denergy, low-e for thermal insulation, double glass 8 tempered-15-33.1; triple glass, 8 tempered - 12-4-12-33.1 for Exter plus version). Sash with aluminum glass-holder and Denergy low-e glass in Hidden Glass version. Double gasket inserted into the frame for thermal and acoustic insulation (made of thermoplastic elastomer) resistant to the application fields from -40 to 120°C, and to aging caused by weathering, fine dust emissions and UV rays. Co-extruded internal foam gasket with rigid layer, tear-proof cord and flexible gasket components in order to soften the impact of closure. The double layer glasses are installed with a perimeter glass-to-frame dowelling. Opening mechanisms with multipoint hardware made of steel with copper-zinc parts and mushroom bolts for the perfect cohesion between sash and frame, with Tricoat treatment for better resisting corrosion and other atmosphere agents such as saline fogs and acids. Three dimension hinges in order to grant the right functionality even after possible adjustments occurring after installation.
Exter Glass
Exter Glass 68+ (triple glass)
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,2Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,2 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
104
Exter Glass 68 Hidden (double glass)
collection line frame glass window
Exterpine, larch, mahogany
68 Uf=1,433.1/15 argon/33.1 BE
Uw=1,3Ug=1,1 FS=56%
Exteroak
68 Uf=1,733.1/15 argon/33.1 BE
Uw=1,4Ug=1,1 FS=56%
Exter Glass 68+ Hidden (triple glass)
collection line frame glass window
Exterpine, larch, mahogany
68+ Uf=1,433.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,1Ug=0,7 FS=45%
Exteroak
68+ Uf=1,633.1 BE/12 argon/4/12 argon/33.1 BE
Uw=1,2Ug=0,7 FS=45%
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension. (*) Rw values of glass
The declared values are carried out by tests and calculation in compliance with the European UNI EN 14351-1 law for the CE Conformity Marking of windows; the quality labeling “De Carlo Klima”is based on criteria of transparency, competence and impartiality granted by the producer in order to protect the final consumers. The declared values are calculations made by an analytic method on a window with a single sash 1230x1480mm of dimension.(*) Rw values of glass
The updated technical sections of all typologies and systems are published on www.decarlolab.itThe above-mentioned characteristics can be updated and reported in the quotation document produced by the configuration software DCS 3.0
STANDARD CONFIGURATION ADDED OPTIONS
SashProfile 81 mm width (window and French door)Profile 109 mm width (sliding door)
Profile 109 mm width (window, French door)
Frame Section(window French door)
Profile 70 mm width (with join mill or smooth); aluminum cladding 86 mm width
Supplementary mill (customized for restructuring)Aluminum cladding from 53 to 69 mm
Type of opening (window and French door)
Sash Tilt and turn sash
Anti-intrusion (see security section)
Opening mechanisms with multipoint hardware made of steel (with self-adjusting bolts)
Anti-intrusion base / Anti-intrusion Plus
Central closure section (double sash window and French door)
With added mullion (symmetrical section) Without added mullion (asymmetric section)
Threshold (French door) Aluminum (silver, dark brown, white) Thermal cut
Hinges Multimatic (with anticorrosion Tricoat treatment, 10-year warranty) Concealed Multimatic (with Tricoat anticorrosion treatment, 10- year warranty)
Glass spacer Aluminum (optional colors) Thermal cut (grey, black, white)
Finish Smooth Antiqued (only pine, oak and larch)/brushed (only oak)
Bottom transom of the French door sash Sash profile with single transom 109 mm high -
Printed external glass Black White, dove-grey (RAL 7044), grey
4
E1200
C5
from 36 to 45 dB (*)
until CR2
1,3 a 1,4 W/m2k
4
E1200
C5
from 37 to 50 dB (*)
until CR2
1,1 a 1,2 W/m2k
A+
A
B
C
D
E
F
G
A+
A
B
C
D
E
F
G
105
dWall
DWall is the line of De Carlo curtain wall. They are made of a wood or aluminum structure in the versions:
External façades dWall Wood Glass
dWall Wood WooddWall Wood AludWall Wood BronzedWall Wood GlassdWall Alu
106
107
dWall Wood Bronze (with bronze clad)Detail of natural oak at interior side
108
dWall 109
dWall Wood Alu, white oak interior with front doors
dWall Wood BronzeExternal detail with front doors
110
111
112
dWall Alu
dWall 113
dWall Alu
114
dWall Wood Wood
dWall Wood Alu
dWall Wood Bronze
dWall Wood Glass
dWall Alu
The updated technical sections of all typologies and systems are published in www.decarlolab.it
horizontal section
horizontal section
horizontal section
horizontal section
horizontal section
115
Entry Doors De Carlo entry doors, designed with a single
sash or with symmetric and asymmetric sashes, present different esthetic solutions,
from the traditional to the contemporary style, up to customized design. All De Carlo entry
doors can reach the maximum degree of anti-intrusion safety according to the materials and
hardware used. Furthermore, entry doors can be provided with specific features for assuring
acoustic performances.
116
117
118
Detail of two sash entry door with horizontal staves, made of chestnut stained oak
One sash entry door made of chestnut stained oak, HP line
One sash entry door with two fixed sidelights, horizontal staves, HP line
One sash entry door made of oak with horizontal staves
119
Entry door made of honey stained oak, horizontal staves, detail of external view with staved fixed top-transom, HP line
Staved entry door of honey stained oak, detail of closing system
120
121
122
One sash entry door of honey stained oak, with horizontal stavesDetail of vertical staved entry door of Burma teak
Two sash staved entry door of Burma teak123
One sash entry door, “Artemide” model, Design line
124
Two asymmetric sashes entry door, of chestnut stained mahogany, “Jonio” model, Maxi line
Entry door of chestnut stained mahogany
One sash entry door, “Artemide” model, Design line
125
Entry door of white brushed oak, one sash, “Poseidone” model, Maxi line
126
Entry door of white paint oak, external view
“Poseidon” model, internal view
Detail of closing system
127
128
Oak entry door made according to the customer’s design129
130
The Shutters
131
132
Shutter with frame “wood” collection with adjustable louvers, opening with wall-overlapping hinge arm
Detail of adjustable hinges
133
134
135
136
Detail of adjustable hinges
“Aluminum” collection - shutter with frame with adjustable louvers, opening with wall-overlapping hinge arm
137
138
139
140
Sliding “mantovana” shutter. Wood collection with fixed rhomboidal louvers of painted laminated oak
Shutter
Vertical staved shutter
with frame
Horizontal staved
shutter with frame
Shutter with panel and
frame
Vertical staved
engraved shutter
Horizontal staved
engraved shutter
Fixed louvers
Adjustable louvers
Rhom-boidal louvers
12
Rhom-boidal louvers
20
Blind louvers
Shutter section
Shutter section
Shutter section
Shutter section
Shutter section
Line 54 54 54 54 54 54 54 54 40 Okumè 40 Okumè
Shutter with frame
Frameless shutter
Sliding shutters
ShuttersStaved
shutter with frame
Fixed louvers
Adjustable louvers
Line 54 54 54
Shutter with frame
Frameless shutter
Sliding shutters
141
Roll Flap
142
Roll Flap
143
Roll Flap
It is a new-generation adjustable shutter, with sun-shading louvers of extruded aluminum.The Roll flap system allows you to easily adjust the air and light in every room.
Roll flap-double shutter with connected louvers, in sun-shading position
144
145
Roll flap-double shutter with connected louvers, in sun-shading position
146
147
Collections
Wood Wood/Aluminum Wood/Bronze Wood/Glass Aluminum
Windows
French windows
Front door
Composed glass doors
Lift and slide doors
Pocket sliding doors
Tilt and slide doors
Folding doors
Horizontal pivots
Vertical pivots
Shutters
Curtain wall system
Windows Combinations
148
Notes: price categories represent a general indication for the customer. Standard handles are identified as category A, optional handles with price increase are included in categories B and C. Handles prices are highlighted in De Carlo’s quotations for each window.
Handles
Tokyo model (aluminum)Price category A
Colors: titanium (photo), gold, silver, bronze and white
Tokyo model (aluminum)Price category A
Colors: titanium, gold (photo), silver, bronze and white
Tokyo model (aluminum)With key or buttonPrice category B
Colors: see Tokyo aluminum
Tokyo model (brass)Price category B
Colors: polished brass (photo),satin chrome, bronze
Amsterdam model (aluminum)Price category B
Colors: titanium (photo)- also available with the key -
Amsterdam model (stainless steel)Price category B
Colors: chrome (photo)
Lama model (brass)Price category C
Colors: chrome (photo)
Golia model (brass)Price category C
Colors: polished brass (photo)
Roissy model (brass)Price category B
Colors: satin chrome (photo), polished brass
Roissy model (brass)Price category B
Colors: polished brass (photo), satin chrome
Lisboa model (brass)Price category B
Colors: polished brass, antique (photo), bronze
Lisboa model (brass)Price category B
Colors: polished brass, antique, bronze (photo)
149
Anti-intrusion Hardware
Self-adjusting bolt
Most of the break-in attempts is performed by occasional burglars acting mainly in the afternoon and evening, preferring doors and windows as entry points. The most frequently (70%), they use very simple and rudimentary tools (small screwdrivers or levers), which act on the locking points between sash and frame whose resistance is often won in few minutes. In order to thwart the burglary, prolonging the time it takes to break in, so discouraging burglars, it is often sufficient to insert some simple devices on the frame which slow the burglary
so as to avoid an easy entry inside the house. Due to this, on De Carlo’s windows it is possible the application of both simple devices such as tear-proof bolts and the preparation of real anti-intrusion systems, with degree of resistance in conformity with CR2 and CR3 certificates. Performance levels CR2 and CR3 correspond to a resistance of three minutes against the attacks with small levers (screwdrivers and wrenches), and 5 minutes against the attacks with a crowbar.
• It does not need adjustment, in presence of anti-intrusion rebates automatically adapts itself to the rebate profile (+/- 2 mm).
• Easy handling thanks to the hardening of the material and the special coating.
• Compatible with both flat counter plates and anti-intrusion counter plates.
• Certificate for the resistance to burglary.
All De Carlo’s windows are provided with standard hardware with self adjusting bolts.
Anti-intrusion closing rebates where the mushrooms bolts are attached resist the action of levers.
The use of handles with cylinder or with button prevent from any break-in attempt by forcing the handle mechanism.
Closing rebates
Handle with safe lock
Flat counter plate Anti-intrusion rebates Mushroom bolt with anti-intrusion rebate
Actionable by key lock Actionable by button
150
De Carlo’s proposal
BaseThe flat counterplates can be replaced by anti-intrusion rebates.Only available on tilt and turn versions
01
PlusAnti-intrusion points are uniformly distributed all along the sash perimeter, so as to reinforce the frame along bottom and top transoms. Only available on tilt and turn versions.
02
CR2Along with the Plus characteristics there is the addition of a handle with button or anti-rotation key, the use of hard wood only (laminated oak) with a 78x77 mm sash section, a class P4A anti-breaking glass (minimum 55.4) structurally glued to the sash. The French door is provided with a bottom transom so as to easily insert longer screws for the counter plates fixing. Only available on tilt and turn versions. Rectangular frames.
03
The frame and sash, made of oak, have a larger section than CR2 version and present some internal metal reinforcements. The anti-breaking glass of class P5A (minimum 44.6) has got a tear-proof glueing. Only available on tilt and turn version, single sash only with a 78x107 mm section, rectangular frames.
CR304
standard closing points*
anti-intrusion closing points*
glass bonding
metal reinforcements
*the number of closing points is proportional to the windows dimensions
151
Natu
ral (
TNAT
)
Hone
y (T
ML1
0)
Ches
tnut
(TC5
20)
Teak
(TTK
)
Bren
nero
Wal
nut (
TNB4
0)
Wen
gè (T
WEN
)
Cust
om S
tain
Whi
tene
d (T
SBC)
(1)(
3)
Pure
Whi
te P
aint
(RAL
9010
)
Pain
ted
(OTH
ER R
ALS)
Cust
om P
aint
Brus
hed
Antiq
ued
Type of WoodSurcharge for
Wood Surcharge for Finish
Surcharge for manufacturing
Laminated Pine (LP)(1) (3)
Laminated Mahogany (LM)
Laminated Larch (LL)(1) (3)
Laminated Oak (LR)(1) (3)
Laminated Douglas (LD)
Laminated Canaletto Walnut (LW)(2)
Laminated Brazilian Teak (LT)
Laminated Burma Teak (LB)
We use different types of woods such as: Pine, Mahogany, Oak, Larch, Douglas, Brazilian and Burma Teak, Walnut and Fir. On customer specific request, we can also provide other types of wood.
Wood finishes
NOTES:
A) Bicolor Finish: (at least one side painted) - Surcharge of 30%
B) Brushed: this is a procedure that is applied before the finishing stage. This is carried out by steel brushes which take out the softer parts of the wood in order to highlight the wood grain. This assures a soft effect and it is applicable only on oak.
C) Antiqued: this procedure is similar to the Brushed effect, with the difference of a deeper application of the steel brushes, in order to provide a stronger effect.
D) Surcharges: these are approximate indications and are calculated on the base price of the product.
standard (without surcharge respect to the base price)
optional (with surcharge)
(1) only for exter collection or as internal option for the bicolor finishes(2) only for exter collection(3) not applicable for the shutters
152
De Carlo does not grant the perfect correspondence of colors due to the variances of wood grains reproduced in the photos and declines any responsibilities deriving from the natural variations of wood.
Finishes to be chosen whenever the paint is the target for its covering and aesthetic effect. The colors are to be selected in the RAL color range (a set of RALS is readily available, while specific RALs will be evaluated on request).
RAL Paint on flat support (wood)
RAL 1013 op_1 Pearl White RAL 9010 op_1 Pure White
RAL 9016 op_1 Traffic White RAL 6005 op_1 Moss Green
RAL 6009 op_1 Fir Green RAL 7001 op_1 Silver Grey
RAL 7006 op_1 Beige Grey RAL 7012 op_1 Basalt Grey
RAL 7016 op_1 Charcoal Grey RAL 8011 op_1 Walnut Brown
RAL 8017 op_1 Chocolate Brown RAL 8019 op_1 Grey Brown
153
Wood finishes
Pine Natural Larch Natural
Pine Honey Larch Honey
Pine Chestnut Larch Chestnut
Pine Teak Larch Teak
Pine Brennero walnut Larch Brennero walnut
Pine Wengè Larch Wengè
154
Oak Natural Mahogany pure white painted
Oak Honey Mahogany chestnut
Oak Chestnut Mahogany Brennero walnut
Oak Teak Mahogany Wengè
Oak Brennero Walnut
Oak Wengè
De Carlo does not grant the perfect correspondence of colors due to the variances of wood grains reproduced in the photos and declines any responsibilities deriving from the natural variations of wood.
155
Oak brushed natural stained Oak antiqued natural stained
Oak brushed Moroccan beige Oak antiqued pure white paint
Oak brushed light ivory paint Oak antiqued whitened
Oak brushed whitened Oak antiqued teak stained
Oak brushed teak stained Oak Brennero walnut
Oak brushed wengè stained Oak antiqued wengè stained
Wood finishes
156
Pine antiqued natural stained Larch antiqued natural stained
Pine antiqued pure white painted Larch antiqued pure white painted
Pine antiqued whitened Larch antiqued whitened
Pine antiqued teak stained Larch antiqued teak stained
Pine antiqued wengè stained larch antiqued wengè stained
Pine antiqued silver grey painted Larch antiqued silver grey painted
De Carlo does not grant the perfect correspondence of colors due to the variances of wood grains reproduced in the photos and declines any responsibilities deriving from the natural variations of wood.
157
RAL Color SampleALUMINUM PROCESSING
Assembled Welded
DECORATED WOOD
DLE300 Walnut
DLE700 Douglas
DLE900 Antique white (dust)
DLE1300 Light Cherry
DLE1400 Dark Walnut
DLE1500 Medium Walnut
BRONZE PAINTED
LBR100 Light Bronze Painted
LBR200 Medium Bronze Painted
LBR300 Dark Bronze Painted
OXIDIZED
OSS100 Oxidized Silver 45°
OSS200 Oxidized Light Bronze 45°
OSS400 Oxidized Brown 45°
OSS500 Oxidized Dark Brown 45°
SABLÉ
SAB400 Blue Sablè
158
standard (without surcharge in relation to the basic price)
optional (with surcharge)
RAL Color Sample
ALUMINUM PROCESSING
Assembled Welded
RAL GRINZ
RAL1013 Pearl White
RAL8017 Chocolate Brown
RAL9006 White Aluminum
RAL9010 Pure White
RAL6005 Moss Green
BRUNELLESCHI
BRN200 Brunelleschi Grey
BRN500 Brunelleschi Brown
BRN100 Brunelleschi White
BRN300 Brunelleschi Green
CORIUM
COR300 Corium Coffeè
COR400 Corium Sage Green
COR700 Corium Corten
159
The product warranty goes beyond the standard two-year warranty required by law because De Carlo’s wood and aluminum windows offer considerable benefits in terms of reliability and durability. The warranty validation must be carried out simply by recording the customer’s name and the order code directly on the website www.decarlo.it within 60 days from delivery (even with the Dealer or the Agent’s help).De Carlo, on delivery, shall give the guide for a proper use and care of windows, containing lots of practical advices. De Carlo’s Guide for Windows and the text of the guarantee are available in “file” format on www.decarlo.it site.
Warranty
160